AbstractAluminum and ferric salts are widely used as coagulants in water and wastewater treatment. They are effective in removing a broad range of impurities from water, including colloidal particles and dissolved organic substances. As well as traditional additives, such as aluminum sulphate ("alum") and ferric chloride, other products containing prehydrolized metal ions such as polyaluminum chlorides are now commonly used. The aim of this study was to develop a model for coagulation/flocculati...
Autori: Avid Banihashemi, Manouchehr Nikazar, , Reza Maknoon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25230

AbstractThis paper presents experimental and theoretical studies regarding the behavior after heat treatment of an AlCu4Mg1 aluminum alloy with positive effect on corrosion resistance. On the basis of these experiments and the regression data obtained, an analysis regarding the influence of heating parameters on quenching and aging in order to obtain a certain stress was made. Two cases were considered: stress and quenching temperature are fixed and aging temperature was determined; stress and a...
Autori: Adrian Dima, Alina Adriana Minea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25281

AbstractThe removal of Acid Red 398 (AR398) dye from dye-containing solution using coagulation/flocculation process with polyaluminum chloride (PAC) and Alum was investigated. The effect of different parameters involving pH, dosage of coagulant, initial dye concentration, and bentonite as a natural coagulant aid was examined. According to the obtained results, the optimum pH, at which the maximum removal occurred, was about 4 and 5 for PAC and Alum, respectively. However, PAC performed efficient...
Autori: Maryam Hasani Zonoozi, , Mokhtar Arami
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25335

Abstract The paper presents the comparative study regarding the turbidity removal using aluminium sulphate Al2(SO4)3*18H2O and polyaluminum chlorides, Aln(OH)mCl3n-m, commercial name, Sachtoklarr 39, in water treatment plant from Covasna City. The parameters that influence the treatment process and the efficiency of turbidity removal were studied. The water characteristic parameters of Basca Mare and Covasna rivers - the two sources of water alimentation for Covasna water treatment plant were...
Autori: Daniela Simina Stefan, Cristina Costache, Viorica Ruxandu, Monica Balas, Mircea Stefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25462

Abstract Application of ozone is known to yield favorable results in purification of phosphate plant water from elemental phosphorus, in treatment of water of alkali aluminate solutions of aluminum plants, in decontamination of cyanide-containing waste water of enrichment plants, and so on. It has been proved that halogen-containing compounds, most of which have mutagenic properties, and some of which are carcinogenic to humans, are formed when water is treated with chlorine. Conclusions made...
Autori: Irina Dumitriu, ,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25483

Abstract The aim of this study was to assess nitrate removal using impregnated activated carbon (AC) with MgCl2. After impregnating of AC using heat treatment, the MgCl2 is converted to efficient MgO. The denitrification was conducted at pH 6.2, 25?C, and initial concentrations of 20 mg/L nitrate-N. The effects of the operating parameters including AC dosage, pH, and contact time have been investigated. Experimental data show that AC modified by MgCl2 was more effective than virgin AC for nit...
Autori: Abbas Rezaee, Hatam Godini, Sahand Jorfi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25618

Abstract:The operation of solar air heat collectors consists in a sequence of transient regimes, being conditioned by the availability in timeof the solar resource. This paper presents the results of an experimental research on transient regimes of two types of solar air heatcollectors. The absorbers of the collectors have different configurations and are made of different materials. One collector is acommercial passage air collector with the absorber made of aluminum. The other collector is an ...
Autori: Adrian Ciocănea, Andrei Dragomirescu, Sanda Budea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25731

Abstract:This study aimed to assess the coagulation performance using simple aluminum sulfate (Alum) and pre-hydrolyzed polyaluminumchloride (PACl) coagulation agents by conventional global parameters, i.e., turbidity and organic matter expressed by totalorganic carbon (TOC) and chemical oxygen demand (COD), and non-conventional spectrophotometric parameters.Non-conventional spectrophotometric parameters, expressed as absorbance recorded at different wavelengths, i.e., A254, A280,A365, allowed d...
Autori: Florica Manea, Georgeta Burtică, Ilie Pisoi, Smaranda Masu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25777

Abstract:The adsorption performance of a novel support for metal ions sorption and their removal from aqueous solutions was examined.The support is a new solvent-impregnated resin (SIR) which can be considered as an alternative adsorbent material capable ofselective sorption. The adsorbent was prepared by impregnating di-(2-ethylhexyl)-phosphoric acid (D2EHPA) onto AmberliteXAD7 resin beads, by dry impregnation method. The interaction between XAD7 resin and D2EHPA was evaluated by FTIRspectrosco...
Autori: Adina Negrea, Adriana Popa, Cornelia Muntean, Corneliu Davidescu, Lavinia Lupa, Mihaela Ciopec, Petru Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25793

Abstract: In this study, decolorization and degradation of aqueous nickel phthalocyanine reactive dye solutions was comparatively studied by electrochemical methods, such as electrocoagulation, electrooxidation and electro-Fenton processes. In the electrocoagulation process with aluminum electrodes the colored aqueous solutions containing 100 mg/L nickel phthalocyanine and 6 g/L NaCl were treated at initial pH 7.5 and applied current densities of 5, 10 and 20 mA/cm2, where fast and 100% decolori...
Autori: Achilleas Christoforidis, Dimitrios Marmanis, Evgenia Valsamidou, Konstantinos Dermentzis, Konstantinos Ouzounis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25804

Abstract:The paper presents the results of a study carried out using the Artificial Neural Network (ANN) for prediction the coagulation/flocculation process of suspended solids in water treatment plant (WTP). In this research 5 kinds of Poly Aluminum Chloride (PAC) as coagulant were used to examine the impact of coagulant kinds, PAC dosage and influent turbidity for removal of suspended solids. Determination of optimal coagulant doses is vital, as insufficient dosing will result in undesirable t...
Autori: Gagik Badalians Gholikandi, Mohammad Delnavaz, Reza Riahi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25806

The synthesis of vanadium oxide systems (with 5 and 20 wt% V2O5 loadings) supported on commercial γ-alumina was carried out by a wet impregnation method. The samples were characterized by low-temperature nitrogen adsorption (BET), inductively coupled plasma (ICP) method and by in situ electrical conductance/capacitance measurements. The adsorption of CO was used to investigate the acidic properties of alumina support and V2O5/-Al2O3 catalysts by FTIR spectroscopy. The catalytic acti...
Autori: , Cristian Hornoiu, Mariana Scurtu, Monica Caldararu, Niculae I. Ionescu, Tatiana Yuzhakova, Veronica Bratan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25869

AbstractThis paper deals with the experimental investigation related to removal of hydrogen sulfide from simulated groundwater byadsorption/oxidation on activated carbons. Carbonaceous adsorbents were synthesized from peach stones by physical-chemicalactivation method and modified by oxidation following impregnation with Cu2+ by ion-exchange method. Obtained carbonaceousadsorbents were characterized by specific surface area and micropore volume. Surface chemistry properties were evaluated usingB...
Autori: , , Vasile Rusu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26026

AbstractWashing black aluminum (Al) slag to obtain soluble salts is an important stage of the smelting slag treatment at technologicalprocess. This process is used to recover Al as a coagulant for water purification. This research aims at establishing the optimalconditions for washing (e.g. temperature (T), solid: liquid ratio (S : L), time, the recirculation waters in the system). The goal ofresearch was to determine: a) the removal with maximum efficiency of the soluble salts from black Al sla...
Autori: Romanita Teodorescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26243

AbstractThis paper continues the previous investigations regarding the technology for the Aluminum (Al) recovery as Al sulfate fromblack Al slag. Leaching is the next compulsory step in the Al extraction process. The paper studies the influence of mothersolutions´ (MS) recirculation resulted from the process within the system over the quality of Al sulfate and the siliceous residue(R) and, the aluminum nitride (AlN) hydrolyses in the leaching process. The optimum parameters determined are: *the ...
Autori: Romanita Teodorescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26250

AbstractThe purpose of the undertaken research work is to degrade the biopolymeric pigments present in the distillery spentwash. This isdone by direct electro-oxidation using iridium oxide coated titanium mesh as catalytic anode. The effects of current intensity,dilution, pH and time of electro-oxidation were studied. The combined effects were analyzed using Box-Behnken design foroptimization and statistical analysis. The rate constant for first order electrochemical kinetics relating the rate c...
Autori: R. Krishna Prasad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26253

AbstractA new cell design which makes an efficient use of the cathodically evolved H2 to improve the mixing efficiency and thefloatation ability during electrocoagulation was used to remove dyes from waste solution. In this study, the decolorization andCOD reduction of colored solutions containing reactive and basic dyes by electrocoagulation was investigated using aluminumelectrodes in a batch mode. The effect of operating parameters such as current density, initial dye concentration, NaClconce...
Autori: El Sayed Zakaria El Ashtoukhy
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26303

AbstractThe paper compares the electrocoagulation performance during the removal of Acid Brown 14, Acid Yellow 17, Acid Blue 113and Acid Black 172 dyes from aqueous solutions. For this purpose, pH changes and effectiveness of main parameters includinginitial dye concentrations and current densities for the selected dyes were examined. In addition, effluent turbidity, energyconsumption and amounts of released aluminum were also investigated. The present work shows that Acid Yellow 17 removaleffic...
Autori: Mahsa Taheri, , Mokhtar Arami
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26310

AbstractA series of experiments were performed to quantify the adsorption of Cesium on Silica impregnated withtrihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101). Non-radioactive cesium solution was used as a surrogate of theradioactive 137Cs. The obtained impregnated Silica with the studied ionic liquid was characterized through scanning electronmicroscopy, energy dispersive X-ray analysis and Fourier transform infrared spectroscopy in order to put in evidence that theimpregnation with the...
Autori: Adina Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26473

AbstractMost studies exploring the contribution of the mycorrhizal symbiosis to plant metal tolerance focus on plant-metal uptake anddisregard metal effects on the symbiotic fungi. We examined the tolerance of the model arbuscular mycorrhizal fungusRhizophagus irregularisto Al and Pb in vitro cultures with transformed carrot (Daucus carota L.) roots that exclude theinterference of other microbiota. We studied the development of roots and external mycelium of R. irregularis in monoxenic andaxenic...
Autori: Mayra E. Gavito
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26516

AbstractPetroleum tanker trucks are integral vehicles for delivering fuel and other petrochemical products from place to place and must becleaned regularly. Pressure washing with hot or cold water serving to remove oil and filth from the tanker truck container,produces oily waste water with an oil concentration of about 300-500 mg L-1 which, according to environmental standards andregulations worldwide, must be disposed of and treated properly. In the present paper an integrated electrochemical ...
Autori: Konstantinos Dermentzis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26520

AbstractThis study aims to understand the acid-leaching behavior of metals from 2 to 4 mm waste printed circuit boards (WPCBs)containing 22.0% ą 1.1 Cu, 6.7% ą 0.2 Ca, 0.68% ą 0.02 Sn, 0.59 ą 0.01 % Pb, 2.71% ą 0.08 Al, 0.22% ą 0.01 Fe, etc..Copper leaching was increased for sulfuric acid concentrations up to 1.2 mol/L and hydrogen peroxide concentrations of 10.0vol% for a pulp density of 100 g/L at 50°C over 4 h, whereas for the same concentrations of sulfuric acid and hydrogen peroxidecopper l...
Autori: Manoj Kumar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26566

AbstractThe incorporation of phosphorus (P) into sediments and the changes in its bioavailability under intermittent P input and sedimentresuspension conditions were investigated via laboratory experiments. The sediments were disturbed daily for 10 min and thenallowed to settle for 1430 min after each disturbance to simulate the intermittent sediment resuspension conditions. The removalof soluble reactive P from the overlying water under sediment resuspension was greater than that under static c...
Autori: Li Dapeng
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26567

Abstract In this study, the COD removal of Azithromycin from synthetic wastewater (produced to have a composition similar to industrial wastewater) using a Fenton-like (Fe°/H2O2) system in combination with coagulation has been investigated. Chemical oxygen demand (COD) was selected as the main parameter to assess treatment efficacy in the current study (COD° = 390mg/Lequivalent to 200mg/LAzithromycin). First, the coagulation process was carried out on the synthetic wastewater and the...
Autori: Ahmad Reza Yazdanbakhsh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26586

Abstract The performance of electrocoagulation (EC) process, a non-specific electrochemical technology, was investigated for the removal of carbamazepine (CBZ), an antiepileptic drug, from water. Experiments were carried out in synthetic wastewater in a batch cell. The respective influences of some key process parameters were studied, such as mixing conditions, initial pH, and current on aluminium electrodes. Experimental results showed that a CBZ removal efficiency of 62% was observed under...
Autori: Tania Yehya
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26683

Abstract In order to remove various radionuclides (Tl+, Sr2+and La3+) from wastewaters we used three solid supports of (styrenedivinylbenzene) grafted with different pendant groups (1-triphenylphosphonium; 2-izo-propylphosphonate; 3- aminoethylaminomethyl). The solid supports with different pendant groups were impregnated with ionic liquid (Cyphos IL-101- trihexyltetradecylphosphonium chloride). IR-spectra, EDX-ray and SEM image were used to characterize the adsorbent obtained after the imp...
Autori: Mihaela Ciopec
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26749

Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

Abstract Recently several innovative suggestions on how industrial wastes can be utilised in new products have been presented in literature, e.g. as filler or additives in concrete, incorporated in ceramic materials to produce glass-ceramics and pavement construction. In this work, metallurgical materials from secondary aluminium scrap processing and glass waste derived from treatments of packaging and fluorescent lamps were considered for fabrication of new ceramic materials using powder te...
Autori: Rosa Taurino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26794

Abstract The objective of this paper is to propose an optimal path for a circular economy strategy of Aluminum Corporation of China (CHINALCO) by constructing a circular economy evaluation model. Based on CHINALCO’s resource circulation and the regularity of material balance, and by depicting the value information in the process of resource input, consumption, output and waste, we build a comprehensive evaluation model for the enterprise circular economy - a resource value flow equatio...
Autori: Fei Xiong
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26815

Abstract The paper describes a numerical analysis concerning the behaviour of Cu and Ni based catalysts having different mole ratios of Ni to Cu in the process of glycerol hydrogenolysis. The impregnation technique was used to prepare the copper and nickel based catalysts. Our study revealed that their performances are different and depends on the Ni/Cu ratio. The catalysts were tested using various reaction conditions, such as time and temperature, and their performances analysed based on t...
Autori: Adriana Marinoiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26843

Abstract An experimental study on the hydrodynamics of fixed, fluidized and spouted granular bed was performed. With this aim two commercial adsorbent materials and a composite material obtained by impregnation with a hygroscopic inorganic salt were employed. The fluid phase consisted in dry air. The obtained results highlight the influence of grain size, material density and roughness over pressure drop and gas velocity. Increasing grain size leads to decreasing pressure drop and increasing...
Autori: Ioan Solomon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26854

Abstract Ash resulting from wood combustion constitutes a waste disposal problem to facility owners. The use of ash fertilizer or soil amendment could provide nutrients for agriculture if its nutrient content is adequate and it does not contain harmful amounts of heavy metals. The recycling of nutrients bound in ash would provide an inexpensive solution to waste problem. In our study, we aimed to characterize ash and clinker resulted from incineration of oak waste resulted from wood industry...
Autori: Ioan Oroian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26885

Abstract Trace metal elements commonly exist in drinking water. Excessive exposing on them may result in lots of health problems. This paper mainly focuses on the accumulations of Cu2+, Cd2+, and Pb2+ in drinking water supply networks with amorphous Al(OH)3 formation. The effects of pH, water flow rate, and metal element contents were investigated at laboratory bench scale. It was found that chemical adsorption mainly occurred at pH > 7.0. Suspended Al(OH)3 showed a strong adsorption capa...
Autori: Wendong Wang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26906

Abstract This study investigated the feasibility of electrocoagulation (EC) process on the treatment of palm oil mill effluent (POME). The effect of several parameters namely initial pH, current density, stirring speed and operating time on removal efficiency of total suspended solids (TSS) and chemical oxygen demand (COD) were investigated. The experiments were conducted batch wise using 400 mL of the POME per batch and pair of aluminum electrodes immersed in the reactor. At optimal initial...
Autori: Firdaus Ghazali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26914

In this work, coagulation features and characteristics of dissolved organic matter (DOM) in combined sewer overflow (CSO) wastewater were investigated. Ferric chloride (FeCl3) and polyaluminum chloride (PAC) were employed in the coagulation process. Results showed that both FeCl3 and PAC are effective in removing turbidity and total phosphorus (TP). Removal efficiencies were all above 90% when dosages were reasonable. Chemical oxygen demand (COD) removal efficiency was between 60% and 70%. T...
Autori: Wei-gang Wang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26931

Ferric sulfate and aluminum sulfate were applied to stabilize the available arsenic in solid waste residue (SWR) from the organic arsenic industry, previously pretreated by the semi-solid Fenton process. NaOH, Ca(OH)2, and MgO were introduced to adjust the matrix pH. Toxicity characteristic leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), and sequential extraction procedure (SEP) were carried out to evaluate the effect and difference on the fixation treatments of ...
Autori: Li-Fang Hu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26956

In this research, Response Surface Methodology (RSM) was employed to optimize five operating variables including initial pH, current, reaction time, initial hexavalent chromium concentration and dosage of polyaluminum chloride as a coagulant for the removal of hexavalent chromium and its relative operating cost by electrocoagulation process. Central Composite Design (CCD) was applied for the optimization process. The results showed that increase of polyaluminum chloride dosage was beneficial for...
Autori: Sepideh Sadeghi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27230

In this study was synthesized MCM-41 mesoporous silica by hydrothermal treatment and funtionalized with titanium in order to obtain mesoporous materials with high surfacea area and photocatalytic activity in photodegradation of organic compounds as antibiotics. The functionalization of the synthesized support material was achieved by impregnation from alcoholic solution. The obtained materials (MCM-41) and (Ti-MCM-41) were characterized by X-ray diffraction (XRD), scanning electron microscopy (S...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27274

The present study shows the results of the chronic test in evaluating the response of lumbricidae under the action of different concentrations of Alleato 80WG. The earthworm samples were taken from a plot of land cultivated with maize. Survival, biomass and aluminum content bioaccumulated in earthworms have been analyzed. Five replicates were carried out for each experiment. The survival rate showed maximum values (100%) for V5 (control sample), and (200 mg kg-1) (p=1) for V4. The other three co...
Autori: Gheorghiţa Brînzea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27334

Three modified bentonites, hydroxy-aluminum pillared bentonite (Al(OH)-Bent), cetyl trimethylammonium bromide modified bentonite (CTAB-Bent), and both cetyl trimethylammonium bromide and hydroxy-aluminum modified bentonite (Al(OH)-CTAB-Bent) were prepared and characterized by Fourier transform infrared spectroscopy (FTIR) analysis. Batch experiments were conducted on the adsorption of phenol at different temperatures, pH and initial concentration. The results indicated that adsorption capacity o...
Autori: Xiping Luo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27481

An apatitic calcium phosphate gel (HaG) was elaborated and used to treat municipal wastewater in a physicochemical cycle prior to the standard biological degradation process. Preliminary laboratory batch experiments outlined the kinetics of heavy metal sorption by monitoring the concentrations found in filtered fractions as a function of treatment time. On site experiments were performed in a municipal wastewater treatment plant by derivation of real wastewater into an experimental tank. In this...
Autori: Nathalie Lyczko
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27488

Papermaking tobacco sheet wastewater exhibits high content of fine suspended solids (SS), intensive color and low biodegradability. Through the process of electrocoagulation (EC) using aluminum anode and stainless steel net cathode, the performance of wastewater treatment and the evolution of the main components in wastewater were examined. Maintaining the pH of wastewater, with 40 mA/cm2 of current density, 2.5 g/L of NaCl for a reaction of 6 min duration, 66.1% of the total chemical oxygen dem...
Autori: Xiangjuan Ma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27509

A simple and efficient method for preparing Ag-doped TiO2 nanoparticles was successfully developed, by associating the sol-gel method and the impregnation-reduction. While titanium dioxide is one of the most used solids as photocatalyst, silver is particularly interesting for applications in biological and chemical detection and for its antibacterial properties. Moreover, in photocatalysis silver acts as an electron sink and donor in capturing the photogenerated electrons. The structural and mor...
Autori: Catalina Nutescu Duduman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27566

Thin-film transistor liquid-crystal display (TFT-LCD) waste glass can be used as a raw material for producing geopolymers, because it contains large amounts of silicon and aluminum in its amorphous structure. The setting time and compressive strength were evaluated to determine the quality of the geopolymer product with various amounts of nano-SiO2 (0%–3%) and TFT-LCD waste glass replacement (0% - 40%). The microstructures of the samples were characterized using mercury intrusion porosimet...
Autori: Kang Gao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27634

In this research, effects of in-line coagulation on permeation flux (PF), flux reduction (FR) and total organic compound rejection (TOC R) of synthesized mullite-allumina MF ceramic membrane (with 50 wt % alumina content) during treatment of synthetic oily wastewater in were investigated. Four coagulants ((ferrous chloride (FeCl2.4H2O), ferrous sulphate (FeSO4.7H2O), aluminum chloride (AlCl3.6H2O) and aluminum sulphate (Al2(SO4)3.18H2O)) plus equal concentration of slaked lime in form of calc...
Autori: Mohsen Abbasi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27659

The Silicon wafer plays an important role in modern electronic products. During the production of Silicon wafer, a large amount of scrap Silicon wafer is generated. The necessity for it to be recycled and recovered is of vast importance since the metal Silicon (Si) is the major by product. Besides Silicon, the wafers also contain a small quantity of Copper (Cu) and Aluminum (Al), that are considered as minor elements during the recovery process of the Silicon wafer production. Therefore, in o...
Autori: Ching-Hwa Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27660

This paper presents an assessment of the toxic compounds released from metalworking fluids (MWFs) used in aluminum solid waste processing and from aluminum slag landfills, and their impact on environmental quality and human health. The mean concentrations of dust, oil mist, aldehydes, volatile organic compounds (VOCs) released from metalworking fluids were determined in machine shops. The exposure in machine shops was quantitatively dominated by VOCs, whose concentrations varied in the range...
Autori: http://www.ecozone.ro/reviste.php?RID=27677

The aim of this study is the treatment of liquid effluents from a petroleum industry (NAFTAL /Algeria) by an electrochemical treatment process (electrocoagulation). The electrocoagulation has proved to be useful for the treatment of wastewater, but in order to enhance its ecological characteristic we found it would be essential to carry out our experiments with ecological energy derived from a photovoltaic solar module, which would contribute to sustainability objectives. The electrocoagulation ...
Autori: Kahina Ighilahriz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27679

The aim of this study was to produce high quality activated carbons from Diplotaxis harra biomass by potassium hydroxide activation and their application in heavy metals removal. To reduce the number of experiments, full factorial experimental design at two levels (24) was carried out to occur optimal preparation conditions for efficient removal of cadmium and cobalt ions from aqueous solutions. Different variables influencing activation process, such as carbonization temperature (500–6...
Autori: Hanane Tounsadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27934

This paper discussed the results of studies regarding metal ions distribution in water, sediments, aquatic plants and different tissues of fish from Snagov Lake, Romania, a natural lake situated 25-30 kilometers north from Bucharest, the capital of Romania. The concentration of several metal ions (Li, Ba, Al, Pb, As, Se) was measured in three points of the lake, namely receiving-input, middle and discharging-output ponds. The samples were collected during spring time from water, sediments, Ce...
Autori: Daniela Simina Ștefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28010

Dairy wastewater has been a major environmental concern because of massive effluents characterized by high pollution load. This study reports the influence of initial pH (pHi), residence time (τ) and elapsed time (t) on the %COD removal (Y1) and specific energy consumed (kWh per kg of COD removed, Y2) for real dairy industry wastewater treatment in continuous stirred tank electrochemical reactor (CSTER) using aluminum electrodes. Central composite design (CCD) was applied for designing th...
Autori: Poonam Kumari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28011

Impregnation of aluminium ion onto silica gel (SG) surface (Al/SG) is to increase the adsorption capacity of an anionic dye such as Indigo carmine (IC). The impregnation was carried out using wetness impregnation. The change of the functional group was evaluated by FTIR, crystallinity was determined using XRD, surface morphology were studied by SEM-EDX, while surface area and pore size using N2 gas adsorption-desorption analyzer. Meanwhile, the best of IC adsorption condition onto SG and Al/SG ...
Autori: Yudi Aris Sulistiyo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28253