AbstractAn assessment of acide drainage forming potential for a mining waste material resulted in a former mine of nonferrous and precious metals ore has been made. The waste material has the following contents: 2,20?ˇ2,28% sulphide sulphur, 2,53?ˇ2,58% Fe, 0,07% Cu, 0,05% Zn, 0,36?ˇ0,40% Pb, 0,008?ˇ0,013% Ca and 3,85?ˇ7,97% sulphate. Bacterial leaching tests in percolating columns during 380 days have been made. The leaching liquor has been recirculated at a liquid:solid ratio of 1L:1kg. After ...
Autori: Vasile Oros
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25239

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

Abstract Biofuels represent a possibility for renewable resources conversion, storage and distribution. Today, diesel oil is commercialized only blended with biodiesel, and according to the 30/2003 Directive of the EU, 5.75% of the total fuels used in the transportation sector must be represented by biofuels by the end of 2010. Biodiesel can be produced from vegetable oils, animal fats and used oils. Viscosity is one of the most important characteristics of liquid fuels. The viscosity of liqu...
Autori: Irina Nita, Dan Mandalopol
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25499

? AN ASSESSMENT OF OPERATIONAL PARAMETERS FOR THE REMOVAL OF CHLOROPHENOLS FROM WASTEWATER ? ENVIRONMENTAL SCIENCES: A PSYCHOLOGICAL-BEHAVIORAL MODEL FOR RESEARCHERS ? ECOLOGICAL AGRICULTURE: DYNAMICS OF THE BIOLOGICAL ACTIVITIES IN SOILS CULTIVATED WITH MAIZE UNDER THE INFLUENCE OF ORGANIC FERTILIZATION ? SOLAR-ASSISTED JOULE-BRAYTON ENGINES USED TO REDUCE CARBON DIOXIDE EMISSIONS ? STUDY OF THE ENVIRONMENTAL EFFECTS OF HEATING SYSTEMS ? MIXED JET-VORTEX METHOD FOR ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25662

Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

AbstractThe significant increase in air transportation expected over the coming decades, combined with the initiation of the emissions trading system (EU-ETS) within European aviation, is increasing the requirement for airlines to find new levels of efficiency in their operating practices leading to reduced emission levels. Technological developments are expected to lead to substantial reductions in fuel burn and emissions over the long term, including aircraft design optimization and the use of...
Autori: Athanasios J. Kolios, Stuart Howe
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26282

AbstractThe alkylation of light hydrocarbons leads to produce the high octane number gasoline blending components. The homogeneouscatalytic alkylation reaction is usually carried out at low temperature in the presence of H2SO4 and HF. The use of heterogeneouscatalysis for this reaction is a promising solution for the replacement of hazardous acids to environmentally friendly zeolitecatalyst. The alkylation reaction of isobutane with 1-butene was studied on selected zeolite catalysts. The objecti...
Autori: Tatjána Juzsakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26514

AbstractThe aim of this work is to study the valorisation of two regenerated low density polyethylene (LDPE) coming from dirty wastesby blending with polypropylene (PP) in presence of compatibilizer. The first step was the determination of the physico-chemicalproperties of the two regenerated samples (density, melt flow index, water absorption, melting temperature and oxidation index)and the mechanical properties (tensile and shore D hardness).The second step was the characterization of the phys...
Autori: Nabila Guerfi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26565

Abstract Models are very important in the development of information systems for water management and they concern not only hydrology aspects, but also representations of complex software applications. Their conception requires big and orchestrated efforts of various stakeholders, like hydrologists, software and electrical engineers, emergency professionals, GIS specialists and ecologists. Water management blends multi-disciplinary aspects; therefore software analysis and design for this dom...
Autori: Anca Daniela Ionita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26829

Abstract Poly(vinyl chloride) (PVC) is the most widely used material for the production of medical devices such as intravenous fluid bags and tubing, enteral feeding, dialysis equipment and catheters. Despite of their numerous advantages, the plastic medical devices are non biodegradable and prone to microbial colonization causing biofilm associated infections which are difficult to treat and tend to chronicisation. A possible solution to surpass these limitations could be the fabrication of...
Autori: Petruța Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26894

Abstract The aim of this research was to find the optimal method of extracting oil from jatropha seeds and to discovery a technically viable process in which high quality biodiesel can be produced. To begin with, the oil extraction yield obtained with solvent extraction was 34%, using n-hexane in 2 hours. Then, the properties and fatty acid composition of jatropha oil were investigated. We must emphasize that jatropha oil contains about 11% of free fatty acids (FFA), which is far beyond the ...
Autori: Carmen María Fernández
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26909

Abstract The ethanol-gasoline blends have brought new challenges to the in-cylinder mixture air-fuel ratio control for the variable fuel characteristics especially in the traditional PFI (Port Fuel Injection) SI (Spark Ignition) engines. This paper studied all the dynamic links in the intake fuel transfer process from the fuel injectors to cylinders, including the wall-wetting effect and injector fuel flow characteristics. A wall-wetting fuel film evaporation model and an injector fuel flow ...
Autori: Dongwei Yao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26918

This paper presents a mathematical model developed to solve the problem of adequate blending composition for copper smelting process and it is exclusively for the purpose of the case study in "RTB BOR" (Copper Smelter in Bor). The model proposes an objective function, which maximizes the profit by calculating both the “penalties” for the hazardous concentrate elements and “benefits” for the useful ones. Apart from the basic constraints of the existing mathema...
Autori: Ivan Jovanović
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27002

Emission from the combustion processes can cause adverse effect to the environment. The formation of pollutants such as oxides of nitrogen (NOx), carbon monoxide (CO), carbon dioxide (CO2) and oxides of sulphur (SOx) are hazardous and harmful to the ecosystem. Due to these pollutants and also depletion of fossil fuel, several steps should be taken in order to mitigate this problem. Biofuel is known as the potential replacement for fossil fuel. Envo Diesel is one form of biofuel that can be us...
Autori: Mohammad Nazri Mohd Ja’afar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27011

In this study, Response Surface Methodology (RSM) was applied to investigate both the effects of biodiesel percentage in fuel mixture and engine operating parameters (engine load and engine speed) on emission characteristics (unburned hydrocarbons (HC), CO and NOx) of a diesel engine. The optimization of biodiesel percentage in fuel mixture and engine operating parameters also was performed using the desirability approach of the response surface methodology for lower emission characteristics. Th...
Autori: Alireza Shirneshan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27217

Sustainability and integration are becoming keywords in many European Union policies, including ones that are directly or indirectly related to mineral resources and waste management. Moreover, life cycle thinking (LCT) is core to many of these policies. The European Commission has issued the Communications “A resource efficient Europe” and “Roadmap to a Resource Efficient Europe”, the stated goal of which is to reconsider the whole life cycle of resource use so as to mak...
Autori: Gian Andrea Blengini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27267

The objective of this study was to develop a naturally dyeing process of 70% wool /30% Angora mohair blended yarns by using bio-mordants as an environmentally friendly alternative for the conventional metallic salts. Bio-mordanting operation was achieved by using of condensed tannin extract from quebracho bark trees. Conventional mordanting has been performed using the conventional mordants like copper sulphate and tin chloride. Another specific objective of this study was to investigate the pos...
Autori: Ioana Stanculescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27337

Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processi...
Autori: Maria Râpă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27493

Livestock production is under growing public and scientific scrutiny for its greenhouse gas (GHG) emissions. This article contains a preliminary assessment of the inclusion of upstream life-cycle GHG emissions in concentrated feeds design, using the most common nonlinear programming optimization algorithms to determine feed composition. First, GHG emissions are included as costs in a single criteria optimization problem. The unit price of GHG emissions was obtained using a genetic algorithm. Sec...
Autori: Ricardo F.M. Teixeira
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27572

• Environmental engineering and Management Journal No. 4    • AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART II – USER INTERFACE AND FIELD VALIDATION    • COST-EFFECTIVENESS OF OPTIMIZING CONCENTRATED FEED BLENDS TO DECREASE GREENHOUSE GAS EMISSIONS    • FATE AND BIODEGRADATION OF ESTROGENS IN THE ENVIRONMENT AND ENGINEERING SYSTEMS – A REVIEW    • ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27577

• Environmental engineering and Management Journal No. 4    • AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART II – USER INTERFACE AND FIELD VALIDATION    • COST-EFFECTIVENESS OF OPTIMIZING CONCENTRATED FEED BLENDS TO DECREASE GREENHOUSE GAS EMISSIONS    • FATE AND BIODEGRADATION OF ESTROGENS IN THE ENVIRONMENT AND ENGINEERING SYSTEMS – A REVIEW    • ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27576

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

Geocomposite materials consisting of lightly cemented mixtures of expanded polystyrene beads (EPS) and backfill soils are commonly used as fillers and for the construction of light weight embankments. The constant normal stress (CNS) and constant volume (CV) direct shear parameters as well as the relationship between gradation properties of four residual granular backfill soils and direct shear parameters of lightly cemented mixture of EPS and backfill soils was evaluated. The maximum density an...
Autori: Felix Okonta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27771

The paper analyses the compressive strength of problematic soils as marlstone, limestone, and brown clay in Jordan, considering the capacity to use the fly ash residue obtained from the combustion of oil shale as a cement-like material for building works contributing in minimizing the environmental impact of the expected huge output of solid waste resulting from the retort residue of the oil shale rocks. After blending soils collected from Jordan with both fly ash at different percentages (10...
Autori: Monther Abdelhadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27765

This paper investigated the compressive strength and thermal conductivity of water and air cured Portland cement-fly ash-silica fume mortars. The results showed that density, compressive strength and thermal conductivity of blended cement mortars with fly ash were lower than Portland cement control. However, blended cement mortars that contained silica fume as replacement cement both in binary and ternary phase were higher than fly ash mixes and tends to increase with increase silica fume used a...
Autori: Chalermphan Narattha
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27731

In Spain, most substrates used in the production of plants in containers, are composed of peat in combination with other components such as pine bark, perlite or vermiculite. In order to find alternatives to the use of peat, shredded switchgrass (Panicum virgatum L.) biomass was evaluated as a component of the substrates. Five substrates were prepared with the following proportions, by volume, of commercial substrates:switchgrass: 100/0, 75/25, 50/50, 25/75 and 0/100. Pots were filled with the ...
Autori: Jose Alberto Oliveira Prendes
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28134

Clearly, the purpose of this paper is to find an answer to the following question “Is the ethanol additive more environmentally friendly for an SI engine or for a CI engine?”. The tests, therefore, were conducted on both an SI and a CI engine for the same parameters under both same conditions and laboratory. Ethanol was blended into neat diesel (D100) and neat gasoline (G100) at the same proportion (10 vol. %) and two blends were prepared in the study, namely D90E10 and G90E10, re...
Autori: Suat SarÄądemir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28190

LED waste quartz sand (LEDWS), which is a prominent by product of the LED manufacturing process, may contaminate the environment because it comprises specific heavy metals (e.g., As and Cu), which are hazardous ingredients to the environment when disposed of improperly. Therefore, this study investigated the use of light-emitting diode (LED) waste quartz sand to partially replace Portland Type I cement (OPC) to evaluate the feasibility of reusing it as a pozzolanic material. The SiO2, Na2O, and ...
Autori: Kae-Long Lin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28207