Abstract This paper aims to propose a new solution for rational valorization of the secondary powder materials from steel makingin electric arc furnaces. The elaborated steel quality as well as the economical advantages represented by secondary powdermaterials recirculation were studied. A good correlation between the proportion of brickets loaded into the melt and the melting ofcarbon has been found. The proportion of the EAF dust brickets can grow even at 5-7%. Zinc presence could havenegat...
Autori: Mirela Gabriela Sohaciu, Avram Nicolae, Cristian Predescu, Stefan Velicu, Gheorghe Gh. Calea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25438

Abstract In the new millennium to sustain a healthy life in harmony with nature, it will be extremely important to develop various materials and processes that minimize any harmful influence on the environment. The feasibility of sludge recycling in the brick manufacture was evaluated through laboratory testing. Several ceramic masses with clay, sand and various proportion of sludge have been synthesized and than characterized by their physical-mechanical properties. Sludge fineness also has ...
Autori: Ana - Maria Szoke, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25454

Abstract Starting from the disadvantages of the polystyrene system – the most important being that they are not biodegradable and their life cycle is relatively small, up to fifteen years – there were conceived several structures for outside walls made of perforated bricks vertically disposed and filled with granular materials. In this manner the thermal resistance is improved knowing that in gaps bigger than twenty millimeters there appear convective streams which substantially decrease ...
Autori: Răzvan Giuşcă, Vladimir Corobceanu, Raluca Giusca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25551

Abstract:Lightweight materials are more viable for use in invariably hot or cold climates than in temperate climates. However, it is possibleto use lightweight construction systems and specifically membranes even in housing buildings in temperate climate areas, if theirproperties are well explored, allowing better environmental performance and cost effectiveness than conventional solutions. In theouter skin and in dividing elements, architectural membranes can be used as thermal regulators, for ...
Autori: António Pedro Reis, Joăo Pedro Couto, Paulo Mendonça
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25781

Abstract Being involved in the synthesis of precursors for amphetamine and amphetamine-like drugs, pyridine (Py) may be also regarded as a by-product found when these drugs are obtained via the Leuckart method. Also, pyridine is well known as a biomarker of microorganisms, when those are subjected to pyrolysis before analysis by various instrumental techniques. Consequently, since Py is not commonly found in the air, its presence as a contaminant at trace levels in a room could ind...
Autori: George-Bogdan Ghira
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26109

AbstractThe paper analyses the opportunity of recycling sewage sludge in the manufacturing of ceramic building materials. Wastewatertreatment plants (WWTP) produce annually a great volume of sludge and its processing become more difficult. On the otherhand, there is an increased need to develop new alternatives beyond the already known methods. The use of WWTP sludge asraw material for the production of bricks may become an interesting alternative, both from an industrial and environmental point...
Autori: Anna-Maria Szőke
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26251

AbstractThe construction industry is one of the main sectors of energy consumption and carbon emissions in China. The new-types ofbuilding materials can be produced by recycling industrial solid wastes which is an effective solution to development of greenbuilding materials and abatement of environmental emissions. In this paper, new-types of bricks made of fly ash (residuesgenerated in coal combustion) and coal gangue (a kind of solid wastes generated in coal mining and coal production) and the...
Autori: Haitao Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26265

AbstractThe main objective of this study is to investigate the utilization potential of oil well-derived drilling waste (DW) in the firedshale-brick production. Different mixtures were suggested for the experimental work with the DW content varying from 20% to40%. The prepared briquettes from different mixture were fired at a temperature ranging from 950°C to 1050°C for 1 h, with aheating rate of 2~3°C /min. Water absorption, apparent porosity, bulk density, weight loss by ignition, firing shrin...
Autori: XiangGuo Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26269

AbstractThe thermal and water insulation of buildings is extremely important. Currently, the most applied insulation materials in thebuilding sector are plastic foams and fibrous materials. Different types of polystyrene materials are used as water and thermalinsulators, e.g., expanded polystyrene (EPS) and extruded polystyrene (XPS). The differences between the different polystyrenematerials is found in their manufacturing processes and thus in their microstructure. Our research focuses on the ...
Autori: Ákos Lakatos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26546

The aim of this study is to investigate an innovative way to utilize the char obtained from tyres pyrolysis, in order to realize lightweight materials for building. Pyrolysis residue, mixed with three types of waste glass, has been used as raw material to obtain lightweight materials, exploiting its capability to behave as foaming agent. The results demonstrate that the pyrolysis char is a good foaming agent for the mixtures 50/50 with glassy sand and packaging glass waste, thermal treated at...
Autori: Fernanda Andreola
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27119

The objective of the present study was to (i) compare different treatment options for greywater (GW) reuse, (ii) assess the potential of treated GW for reuse, and (iii) select the optimal treatment option by using Analytic Hierarchy Process (AHP). Raw GW was settled for 2 h. Five different treatment options were investigated simultaneously in parallel using the same influent (settled GW). The treatment options were (1) sand filtration, (2) sand/brick bat filtration, (3) alum coagulation/floc...
Autori: Dilip Machindra Ghaitidak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27669

This paper focus on how prefabricated building systems can allow the implementation of deconstruction strategies. Prefabricated mechanically fixed components, in comparison with conventional concrete and brick in situ construction, can be more easily separated during demolition, allowing its reuse, and even if this is not possible, at least allowing the recycling or the energetic recovery. It is very important that construction practitioners understand the benefits of the prefabrication. As a wa...
Autori: Joăo Pedro Couto
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27739

In this paper, the typical measurement techniques and production procedures defined in the UNI-EN guidelines for ceramic manufacture are taken into consideration to evaluate the properties and the characteristics of the bricks produced by using a mixture containing cubilot slag. The results of the experimental tests demonstrate that these measurement techniques are not enough to define the safety of the waste bricks. Up to now, UNI-EN guidelines for ceramics do not define crystallinity measureme...
Autori: Domenico Luca Carni
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27787

This paper exposes the research activities regarding REBAF (Energetic Recover of River Biomasses) project, focused on the maintenance operations self-sustainability of the Secchia river (Italy). Poplar was found as the most abundant and representative wood plant of Secchia riverbanks, with a good behavior during gasification process: from 1 hectare of maintenance every three year, it was possible to produce 23 MWh of electrical power and 31 MWh of thermal power. The biochar obtained was characte...
Autori: Vittorio Vezzali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27804

The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

The analysis by numerical simulations can be applied to building materials subjected to different climatic conditions to envisage the influence of environmental factors in terms of drying time, water absorption and thermal performance of materials. Currently there is a wide variety of new building materials used for insulation, waterproofing and rehabilitation, each contributing in a specific way to constructions improvement during their service life. In time, every building is subjected to degr...
Autori: Alexandra Alisa Găină
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27863

This study aims to evaluate the properties of different wastes obtained from four red ceramic brick industries in the northern region of Santa Catarina, Brazil. The characterization of the clay brick waste (CBW) was performed using the XRD techniques, XRF, FTIR, DTA and SEM. Techniques to determine the pozzolanic activity, particle size, B.E.T. surface area and specific mass were used. The consumption of calcium hydroxide (CH) in the cementitious pastes with the CBWs was also measured. An app...
Autori: Adilson Schackow
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28184

The paper analyses the possibilities of recycling tannery sludge (TS) in clay brick manufacture. The physico-mechanical properties and microstructure of clay brick and cement mortars vary depending on TS content in the mix. 2.5 %–15.0  TS (by weight) was added to clay bricks fired at 1000 C temperature and maintained at maximum heat for 1 hour. The tests revealed that 2.5  TS addition had a positive effect on physical and mechanical properties of clay brick: reduce drying and mfi...
Autori: Olga Kizinievič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28209