![]() |
![]() |
|
Rezultatele pentru unsaturated polyesterRezultate gasite: 11
Arsenate removal by Withania frutescens plant from the south-western Morocco
Environmental Engineering and Management Journal › Vol. 8 › Nr. 6 Abstract
Withania frutescens plant from the south-western Morocco was used as an environmentally friendly material for the removal of As(V) ions from aqueous solutions. This work presents the characteristics of the adsorption and the desorption processes of As(V) using the dried W. frutescens plant as an environmentally friendly adsorbent. The mass of the adsorbent, the As(V) concentration, the contact time and the pH of the tested aqueous solutions were used as controlled variable parameters... Autori: Mohamed Chiban, Gabriela Lehutu, Fouad Sinan, Gabriela Carja ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=25568
OPTIMIZATION OF THE STRENGTH STRUCTURE FOR 10 kW WIND TURBINE BLADES
Environmental Engineering and Management Journal › Vol. 10 › Nr. 9 Abstract:This technical paper presents some aspects concerning the static finite element analysis of a wind turbine blade. For themanufacturing of the blades for a 10 kW wind turbine elaborated at the Technical University of Moldova composite materialsmade up of polyester matrix reinforced with fiber glass are being used. In order to determine the mechanical properties of theproposed composite materials 10 different samples of laminated composite plates were numerically simulated in ANSYS 11.... Autori: Marin Guţu, Viorel Bostan ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=25747
SYNTHESIS OF NEW CATALYSTS BY INSERTION OF Co AND Cu IN THE MATRIX OF HYDROTALCITE-LIKE MATERIALS FOR CINNAMALDEHYDE HYDROGENATION
Environmental Engineering and Management Journal › Vol. 10 › Nr. 10 Abstract:This study is focused on the influence of Co and Cu ions located in Zn/Ni/Al matrix on the structural, textural and catalyticproperties of layered double hydroxides (LDHs). The samples were prepared by co-precipitation (Ni2+/Co2+(Cu2+)=0.25;M2+/M3+=2)) at low super-saturation and afterwards characterized by XRD, nitrogen physisorption, thermogravimetry, FT-IR, DRUV-Vis and TPR. The XRD results show that the resulted solids are well crystallized and contain only pure phases of LDHs.Also,... Autori: Adrian Ungureanu, Alexandru Chirieac, Brindusa Dragoi, Emil Dumitriu ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=25789
CONTROLLING THE ACTIVITY AND CHEMOSELECTIVITY IN THE CINNAMALDEHYDE HYDROGENATION BY INSERTION OF NONNOBLE METALS IN THE MATRIX OF HYDROALCITE-LIKE MATERIALS
Environmental Engineering and Management Journal › Vol. 11 › Nr. 1 The purpose of this study was to prepare new nanocomposite catalysts of Metal/LDHs type by mild reduction of transition metal cations Co2+ and Cu2+ substituted in the matrix of ZnAl-LDH at 150°C and atmospheric pressure, under hydrogen flow. To this end, a series of ZnCuCoAl layered double hydroxides (LDH) precursors were synthesized by co-precipitation method. M2+/M3+ (i.e., Zn2+/Al3+) molar ratios were kept constant while the Cu2+/Co2+ molar ratios were varied in order to investigate their in... Autori: Adrian Ungureanu, Alexandra Sasu, Alexandru Chirieac, Alina Moscu Corcodel, Brindusa Dragoi, Constantin Rudolf, Emil Dumitriu ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=25852
BIODEGRADATION OF POLY(HYDROXYBUTYRATE)/POLY(VINYL ALCOHOL) BLENDS BY FILAMENTOUS FUNGI
Environmental Engineering and Management Journal › Vol. 12 › Nr. 2
Abstract
Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The
properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The
resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation
modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse... Autori: Luiza Jecu ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=26111
AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART I – DEVELOPMENT AND MODEL VERIFICATION
Environmental Engineering and Management Journal › Vol. 16 › Nr. 2 Public awareness and concern with impacts of pollution on multimedia environment have been greatly increased in the last few decades. There are growing needs for creating remediation strategy and setting effective standard and regulations to reduce pollutant levels in the environment. To satisfy such need, tools that can provide comprehensive understanding and characterize the behavior of chemical in the environment are required for environmental risk assessment and management. A new integrated ... Autori: Zhi Chen ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=27251
INFLUENCE OF SOIL MATRIX ON SOIL-WATER RETENTION CURVE AND HYDRAULIC CHARACTERISTICS
› › Nr. 2 The composition and the structure of the soil matrix have an important role in determining the water and the air regime into the
soil. In the soil pore the area occupied by water and air, capillary and adsorption phenomena occur, together defining the suction of the matrix. The suction-humidity relationship varies from one soil to another, but also to the same soil in time.
This paper sets out the results of investigations aimed at highlighting the influence of the composition and structure of... Autori: Florian Stătescu ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=27332
SYNTHETIC TEXTILE WASTEWATERS TREATMENT BY COAGULATION/FLOCCULATION USING FERRIC SALT AS COAGULANT
Environmental Engineering and Management Journal › Vol. 16 › Nr. 9 Three different synthetic textile dyeing wastewaters were treated by a chemical coagulation/flocculation process, using ferric
sulphate as coagulant. Polyacrylamide (Magnafloc 155) and polyamine (Superfloc C-573) based flocculants were applied. The
influence of pH (between 3.5 and 10.4) and Fe3+ concentration (from 15 to 4000 mg/L) in both color and dissolved organic
carbon (DOC) removal of polyester, cotton and acrylic dyeing wastewaters was assessed in the coagulation stage. As far as
floc... Autori: Carmen S.D. Rodrigues ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=27427
EFFECT OF PARTICLES SIZE OF CRT GLASS WASTE ON PROPERTIES OF POLYMER CONCRETES
Environmental Engineering and Management Journal › Vol. 17 › Nr. 10 The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th... Autori: Paolo Pozzi ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=27799
THE USE OF SOIL HYDRAULIC PROPERTIES AS INDICATORS FOR ASSESSING THE IMPACT OF MANAGEMENT PRACTICES UNDER SEMI-ARID CLIMATES
Environmental Engineering and Management Journal › Vol. 18 › Nr. 5 Water retention capacity and hydraulic conductivity are major soil hydraulic properties that influence soil quality and the
environment. The objective of this work was to assess major soil hydraulic characteristics in response to the effect of soil
management and tillage practices. Eight soil treatments were considered: conventional tillage, reduced tillage, no-tillage, fallow notillage,
abandoned soil, compacted soil, plough on compacted soil, and application of super absorbent polymers. The... Autori: Fereshte Haghighi Fashi ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=27996
OLEFINS AND FUELS FROM FRYING PALM OIL THROUGH PYROLYSIS
Environmental Engineering and Management Journal › Vol. 19 › Nr. 2 The pyrolysis of frying palm oil was studied in continuous stationary process, in a micropilot plant. The main factors affecting the products yields are temperature and residence time. For the studied parameters range (temperature: 475oC - 630oC and residence time: 120 s- 240 s), the gas yield varied between 7.9% (w/w) and 63.3% (w/w), related to feed. Unsaturated hydrocarbon yields (olefins) can reach 24-29% (w/w) related to feed, at the right processing parameters, the main products having goo... Autori: Ana Maria Sivriu ISSN: 1843 - 3707 http://www.ecozone.ro/reviste.php?RID=28162 |

