Abstract Macro-Defect-Free (MDF) cements are polymer-cement composites characterized by high value of flexural strength. Due to their thermal and electrical insulating properties, MDF cements could replace other insulators obtained by environmental non-friendlier technologies or being themselves toxic and non-biodegradable. MDF cements obtained by the use of an ecologic polymer (poly(vinyl alcohol)) shows high mechanical resistance in the initial state but also it’s dramatic decrease after ...
Autori: , Georgeta Moise, Hulusi Ozkul, Ozgur Ekincioglu, Catalin Croitoru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25493

Abstract Starting from the disadvantages of the polystyrene system – the most important being that they are not biodegradable and their life cycle is relatively small, up to fifteen years – there were conceived several structures for outside walls made of perforated bricks vertically disposed and filled with granular materials. In this manner the thermal resistance is improved knowing that in gaps bigger than twenty millimeters there appear convective streams which substantially decrease ...
Autori: Răzvan Giuşcă, Vladimir Corobceanu, Raluca Giusca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25551

Abstract The textile wastewaters have a diverse composition depending both on the used raw materials and applied manufacturing technologies. These wastewaters may contain various pollutants such as organic compounds (e.g. residual dyes), suspended solids, metal ions etc. Most of dyes are synthetic compounds with aromatic molecular structures and non-biodegradable. The oxidative destruction via homogenous oxidation processes with hydrogen peroxide (simple chemical oxidation with H2O2 or advanc...
Autori: Carmen Zaharia, Daniela Suteu, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25570

Abstract:Our research was focused on developing some new procedures to reduce the biodegradable wastes by composting. The aim of thisstudy was to obtain and asses at laboratory scale the maturity of three compost samples of different proportion of vegetable waste,beech sawdust and sewage sludge by analyzing their FT-IR spectra and C/N ratio. The composting process was monitored by testsperformed weekly on the three samples in order to investigate the physical parameters (pH and electroconductivi...
Autori: Anca Sauciuc, Claudia Zaha, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25772

This paper presents a new photo-Fenton procedure applied in oxidative degradation of organic pollutants using 4-chlorophenol (4-CP) as low biodegradable testing compound. The homogeneous photo-Fenton process was modified by using a photo-catalytic reactor equipped with a steel wire mesh which acts as source for Fe2+ catalyst generation into reaction medium and as heterogeneous catalyst, by iron oxy-hydroxyl compounds formation on the surface. The oxidation process was evaluated by measuring the ...
Autori: Adina-Elena Segneanu, Cristina Orbeci, Ion Untea, Mihaela Emanuela Craciun, Rodica Stanescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25864

AbstractMethane landfill emissions are a general concern and should be estimated for taking the proper measures for global warmingmitigation. The European legislation is supporting all techniques that avoid, reduce or treat CH4 emissions. One of the maindirections is reducing the quantities of biodegradable waste disposed in landfills. The efforts for GHG emissions reduction andalso compliance with European legislation in the field of waste management does not mean only putting in place some sta...
Autori: Liliana Bobirica, Rodica Stanescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25984

Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

AbstractThe paper presents a hybrid method for the advanced removal of low biodegradable organic compounds from water, bycombining the separation selectivity of the membrane with the oxidation efficiency of the photocatalytic process. The aim of thisstudy is to evaluate the performance of the hybrid method to remove toxic compounds from wastewater. The advanced oxidationprocess, based on a photocatalytic reactor with continuous recirculation, ultraviolet (UV) radiations and a membrane, was usedf...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26490

AbstractThe objective was to study the degradation of azo dye C.I. Acid Orange 7 (AO7) and intermediates for its synthesis sulphanilicacid (SA) and 2-naphthol (2-N) by Fenton process. Full factorial design and response surface methodology were applied to modelthe system behavior influenced by studied process parameters ([Fe2+] and [H2O2]).Optimal process conditions were determined on the basis of mineralization efficiency. The effectiveness evaluation of appliedtreatment process was conducted on...
Autori: Sanja Papić
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26569

AbstractThe general aim of this paper is to demonstrate the sustainable management of a broad spectrum of wastes (livestock, industrial,agri-food, agricultural and non-recyclable fraction proceeding from waste treatment plants) in an integrated plant. Thetechnological development and practical application of the “Mixed Plant” concept is used to achieve this objective. In order tovalorize in a joint form all the above-mentioned categories of waste, two different processes have been integrated. Th...
Autori: Dolores Hidalgo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26579

Abstract Biodegradable chitosan was used to cover fertilizer granules with an inert, impermeable layer in order to obtain a material with controlled release properties. The process was performed in a laboratory drum granulator. Prepared materials were characterized with available analytical methods (XRD, optical microscopy). The layer thickness of the obtained materials was in the range of 0.047 – 0.5425 mm. The degree of nutrients' release (0.64-0.965 within five hours) were deter...
Autori: Krzysztof Lubkowski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26583

Abstract Nowadays, an efficient wastewater management involves the use of advanced treatment technologies able to decompose hardly biodegradable compounds with reasonable costs at the lowest possible environmental impact. In our work we used one of the most efficient advanced wastewater treatment, the Fenton reaction and its photo-assisted version. The hydrogen peroxide was the oxidizer; despite its relatively high cost, its high activity in oxidizing of a large variety of organic persistent...
Autori: Vasilica-Ancuta Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26677

Abstract Bioplastics are biobased materials, usually easy biodegradable, derived from renewable resources. Evolution of bioplastics production is related to: bio starch and starch mixtures (74.5%); bioplastic products from fermentation (13%), bioplastic from petrochemicals materials (12.5%). They are seen as a viable solution to avoid some environmental impacts caused by the use of fossil-based conventional plastics. In this context, the general objectives of this study entail the analysis a...
Autori: Elena-Diana Comaniţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26688

Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

Abstract The Bio.Lea.R project aims to demonstrate the performance of a landfill for less reactive, biologically treated waste (pretreated organic wastes) compared to a conventionally managed landfill, with regard to both environmental (biogas and leachate production) and economic aspects. The objective is to control the pretreated biodegradable waste through a liquid injection in order to achieve the same biogas quantity in a shorter time than in conventional landfill. Laboratory and full ...
Autori: Alberto Godio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26784

Abstract Poly(vinyl chloride) (PVC) is the most widely used material for the production of medical devices such as intravenous fluid bags and tubing, enteral feeding, dialysis equipment and catheters. Despite of their numerous advantages, the plastic medical devices are non biodegradable and prone to microbial colonization causing biofilm associated infections which are difficult to treat and tend to chronicisation. A possible solution to surpass these limitations could be the fabrication of...
Autori: Petruța Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26894

Environmental threats posed in the environment by plastic production and plastic wastes continue to be a major problem today, closely connected with the increase of plastics consumption by the population. Moreover, little efforts are involved in some parts of the world associated to plastic waste collection, recycling and reuse. Considering all these prerequisites, the identification and discussion of risks generated by plastic production and waste in the environment are performed in this pap...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26990

Zirconia (ZrO2) as a ceramic biomaterial facilitates the osteoconductivity in new bone formation around implant. Surface characterization before and after electrochemical testing was performed used scanning electron microscopy (SEM). The electrochemical properties of the yttrium oxide stabilized zirconium oxide (YSZ) coated and uncoated MgCa sample with the open circuit potential at different immersion time in Ringer’s solution were studied by electrochemical impedance spectroscopy (EI...
Autori: Bogdan Istrate
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27021

A biodegradable iron based alloy was obtained through classical melting method using a furnace with controlled atmosphere. The metallic material was obtained from high purity materials using a proper obtaining method. The material is proposed as an alternative to magnesium alloys that have a very fast degradation period for applications with longer healing periods (more than 3 and between 12 to 18 months). The material was analyzed using scanning electron microscopy (SEM) and X-ray dispersive...
Autori: Sergiu Stanciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27023

In this study, the potential for biogas production from biodegradable bioplastics was evaluated. Mater-Bi® (a family of maizestarch based flexible films) and PLA (PolyLactic Acid; a rigid, polylactide-based, polymer) bioplastics were digested in laboratory batch reactors, alone or in co-digestion with pig slurry or scotta (partially deproteinized cheese whey), at 35°C or 55°C. Methane (CH4) and hydrogen (H2) production were monitored during the incubation period. Maximum CH4 (Mmax...
Autori: Ciro Vasmara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27134

After the entry into force of Landfill Directive 1999/31/EC the member states of European Union (EU) turned towards other technologies for waste treatment and management, such as mechanical-biological treatment of waste (MBT) in order to meet the obligations related to the reduction of the amount of landfilled biodegradable waste. This paper presents an analysis of the waste management in Poland in terms of the current regulations and requirements of the EU and achievement of the mechanical - bi...
Autori: Monika Suchowska-Kisielewicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27266

In this study was synthesized MCM-41 mesoporous silica by hydrothermal treatment and funtionalized with titanium in order to obtain mesoporous materials with high surfacea area and photocatalytic activity in photodegradation of organic compounds as antibiotics. The functionalization of the synthesized support material was achieved by impregnation from alcoholic solution. The obtained materials (MCM-41) and (Ti-MCM-41) were characterized by X-ray diffraction (XRD), scanning electron microscopy (S...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27274

In this paper life cycle assessment was applied to analyze and evaluate, from an environmental point of view, current and alternatives to the current solid waste management system in Banjaluka region. The current system, which is disposal on landfill, has significant adverse environmental impacts caused by methane emissions from landfill. Therefore, four different scenarios were developed as alternatives to the current waste management system. Landfilling with energy recovery, separate collectio...
Autori: Draženko Bjelić
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27312

This paper introduces basic information on the biodegradation of polymers as well as the mechanisms of degradation and factors influencing this process. This paper describes prodegradant additives that induce decomposition of polymers to biodegradable compounds with regard to additives causing oxo-biodegradation. Based on the results of experiments conducted for molded pieces made of polypropylene and extrudates made of low density polyethylene with a d2w prodegradant additive, dependences betwe...
Autori: Tomasz Jachowicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27519

This work focuses on the analysis of material composition of mixed municipal solid waste (MSW) in the city of Košice, the second largest city in Slovakia, and in the village of Poproč, which is representative of the region. The paper describes the characteristics of the monitored localities, the methodology and the original evaluation procedure. The analysis of the mixed MSW composition in Poproč was performed in 2009-2010, and in Košice in 2011. In both cases, the analys...
Autori: Takáčová Zita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27570

The link between the concentration of biodegradable organic matter and the rate of phenol removal in anaerobic conditions was examined in this work. This study was undertaken using a laboratory scale anaerobic stabilization pond and five closed reactors at two retention times, 2 and 5 days. The initial concentration of phenol and soluble COD decreased in the anaerobic pond effluent and the reactors with increasing hydraulic retention time; 98.6 % phenol removal was observed in reactors after 50 ...
Autori: Ali Almasi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27623

FLUCTUATION OF RIVER NETWORK WATER ENVIRONMENTAL CARRYING CAPACITY IN A COMPLICATED RIVER-LAKE SYSTEM    • MINERALOGY AND GEOCHEMICAL DISTRIBUTION OF HEAVY METALS FOR THE FAGUL CETĂȚII TAILINGS, ROMANIA    • ACCUMULATION AND AVAILABILITY OF TRACE ELEMENTS FROM SOIL INTO ORIENTAL TOBACCO GROWN IN MACEDONIA    • OLFACTORY EFFECT ON LANDSCAPE PREFERENCE    • EFFECT OF MOLASSES ADDITION AS BIODEGRADABLE MATERIAL ON PHENOL REMO...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27628

Advanced oxidation process is getting tremendous importance in the treatment techniques for the removal of nonbiodegradable organics from wastewater due to its ability to completely mineralize the pollutants. It uses different methods to produce hydroxyl radicals which are responsible for oxidation of pollutants. In this work, studies on Fenton, ultraviolet radiation (UV) and UVhydrogen peroxide processes for removing acetamiprid, a neonicotinoid insecticide from aqueous solution are carried ...
Autori: Puthenkattil Abdukunji Fasnabi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27895

MABR (Membrane Aerated Biofilm Reactor) consists in an attached-growth process in which a gas permeable membrane is used as a biofilm carrier, and bubble-less oxygen transfer allows for a counter-diffusional mechanism where the electron donor (NH4+, biodegradable organics) and electron acceptor (O2) reach the biofilm from opposing sides. The paper reports results form the largest MABR installation in the world, demonstrating the beneficial impact of the technology in terms of improved process r...
Autori: Giuseppe Guglielmi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28299

Oil-based drilling fluids are widely used in oil and gas exploration and development. Large amounts of oily drilling cuttings are produced in the drilling process, and improper treatment can cause serious secondary pollution. Chemical cleaning is commonly used to treat oily drilling cuttings. However, most degreasing agents are not environmentally friendly and can cause secondary pollution. Thus, the processing requirements of oily cuttings are difficult to meet. In this study, an environmental...
Autori: Zhiyong Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28313