Plants as biomarkers, biosensors and biomonitorsModelling of wastewater treatment of a pulp and paper mill for monitoringCatalysts for heterogeneous photocatalysts. Part I. Possibilities to improve photoefficiency through catalysts modificationThe global assessment method of the water qualityAspects regarding the wood certification in RomaniaDecolorizing of pulping effluents by ammonium lignosulphonate oxidationPowder coatings-based organic filmsOn environmental effects of the pulp and paper mil...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25172

Abstract The efficiency of Cd (II) removal from aqueous solutions was investigated using Sphagnum moss peat as sorbent. A 23 orthogonal central composite design was successfully employed for experimental design and analysis of results. The combined effect of the initial solution pH, peat dosage and initial Cd (II) concentration was studied and optimized using Response Surface Methodology (RSM). The optimum values of these variables were found to be pH = 4.72, 14.7 g peat /L and 13.64 mg Cd /L, ...
Autori: Catalin Balan, Corneliu Cojocaru, Petru Bulai, Doina Bilba, Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25399

Abstract The practical capacity of an ion exchange or chelating resin depends on various process variables, such as initial solution pH, initial metal ion concentration, metal/resin ratio, contact time and temperature. This work presents the optimization of process variables to maximize the copper loading capacity of chelating resin Purolite S930. To study the combined effect of the initial solution pH, initial Cu (II) concentration and resin dosage were used a 23 orthogonal central composi...
Autori: Petru Bulai, Catalin Balan, Corneliu Cojocaru, Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25563

AbstractThere are many treatment methods used to remove color from textile wastewater, and Fenton oxidation, a well known AdvancedOxidation Process is one of the most efficient. Apart of Fe(II), other metal ions have been used as catalysts in Fenton’s Reagent,and Cu(II) proved to be a good alternative.In this study the effect of the concentration of dye, catalyst and hydrogen peroxide were studied and optimized for thediscoloration process of Reactive Black 5 using a Fenton-like process, H2O2/Cu...
Autori: Andrei-Petru Bertea, Armand-Florin Bertea, Romen Butnaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26042

AbstractIn this work, a four factor three-level Box–Behnken factorial design based on response surface methodology (RSM) wasemployed to optimize the removal of phosphate from synthetic wastewater (mineral salts medium-MSM) by the bacterialconsortium (Bacillus sp. RS-1, Pseudomonas sp. YLW-7, Enterobacter sp. KLW-2). A mathematical model was then developedto show the effect of each medium composition and their interactions on phosphate removal. The effect of the lactoseconcentration (X1), pH (X2)...
Autori: Krishnaswamy Usharani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26235

AbstractIn this research, response surface methodology (RSM) was applied to model the effect of main operational variables includinginitial pH, initial phosphate concentration, current density and reaction time on phosphate removal by electrocoagulation. It wasfound that the decrease of initial pH and initial phosphate concentration, and the increase of current density and reaction time are beneficial for improving phosphate removal efficiency. According to the ANOVA (analysis of variance) resul...
Autori: Mohsen Behbahani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26237

Abstract The present study deals with the removal of Cr (VI) from aqueous solution by polypyrrole (PPy). Response surface methodology (RSM) was applied for the design and analysis of experiments in the optimization of pH, temperature, initial concentration, contact time and adsorbent dose during the removal of the Cr (VI). The optimum adsorbent dose, temperature, initial concentration of Cr (VI), pH and contact time were found to be 0.8 g, 46.5 oC, 187.5 mg/L, 5.3 and 15.4 min respectively. ...
Autori: Ehsan Hasani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26614

OPTIMIZATION OF REDUCTION OF COPPER USING Stenotrophomonas maltophilia PD2 BIOMASS AND ARTIFICIAL NEURAL NETWORK MODELING ...
Autori: Arpita Ghosh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26616

Abstract The interest in waterborne paints amelioration increased lately due to the toxicological effect of certain ingredients on human health, the restrictive environmental legislation and the depletion and escalation in price of raw materials. Research efforts in formulating waterborne paints are directed to insure low volatile organic compounds (VOCs) emission while maintaining and even improving their properties. This paper presents a waterborne paint formulation process. The required ...
Autori: Andrei Ionut Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26639

Abstract This study was carried out to investigate the adsorption of methylene blue (MB) onto pumice powder, as a low-cost adsorbent for the removal of dyes. The experiments were designed based on a central composite design (CCD) and the process was analyzed and modeled using response surface methodology (RSM). In order to study the adsorption process, three important factors viz. pumice dosage (20- 50 mg/50mL), MB concentration (20-40 mg/l) and contact times (5- 35 min) were chosen as varia...
Autori: Kiomars Sharafi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26729

Abstract This work presents the optimization of process variables to maximize the percent of Fe (II) removal, R (%), by chelating resin Purolite S930 from 34% CaCl2 solutions. To study the combined effect of the initial solution pH, initial Fe (II) concentration and resin dosage was used a 23 orthogonal central composite design and Response Surface Methodology (RSM) for analysis of experimental data. To optimize the regression equation was used The Gradient method. The study discovered that ...
Autori: Camelia Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26856

Conductive-diamond electrochemical oxidation processes are promising technologies for treating biorefractory industrial wastes with organic loads below 20000 mg L-1. In this work, electrochemical oxidation of a real industrial pharmaceutical wastewater with conductive-diamond anodes has been studied. The electrolyses were carried out in discontinuous operation mode under galvanostatic conditions, using a bench-scale plant equipped with a single compartment electrochemical flow cell. For optim...
Autori: Joaquín Ramón Domínguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26927

The influence of key process parameters of homogenous catalytic ozonation using ferrous or manganese catalysts on the mineralization rate of salicylic acid (SA), model pharmaceutical pollutant, in water was investigated. In order to assess the combined influence and interactions of studied process parameters as well, the empirical/statistical approach applying Box- Behnken experimental design (BBD) combined with response surface methodology (RSM) was applied. Three numerical and one categori...
Autori: Kresimir Koricic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26939

In this study, response surface methodology (RSM) method was applied based on a five-level and four-variable central composite design. The optimization of the C.I. Direct Red 81 (DR81) removal by the combination of electrocoagulation (EC) and UV processes was also performed. The effect of initial pH, reaction time, current density and initial dye concentration on the dye removal was investigated to obtain the optimal experimental conditions. The optimal conditions with the dye removal of 95% ...
Autori: Elmira Pajootan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26942

Treatment of domestic wastewater using constructed wetland system vegetated with Phragmites australis was studied at lab scale. Response surface methodology (RSM) a mathematical model was employed for analyzing the effect of independent factors (inlet flow rate, outlet flow rate, retention time) on wastewater parameters e.g. electrical conductivity, BOD5, COD, nitrates, phosphates, total solids, suspended solids, heavy metals in order to maximally treat wastewater. All independent variables w...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26999

The objective of this research was to study the degradation of chloramphenicol (CAP) in soil using activated carbon fiber supported nanoscale zerovalent iron (ACF/nZVI) coupled with microwave (MW) irradiation. Compared to ACF/MW, nZVI/MW and MW alone, the ACF/nZVI/MW system had a higher degradation efficiency. A Box-Behnken experimental design was employed to analyse relative significance of independent variables A (irradiation time), B (MW power), and C (MW absorber dosage), and combined ef...
Autori: Wengui Liu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27154

In this study, Response Surface Methodology (RSM) was applied to investigate both the effects of biodiesel percentage in fuel mixture and engine operating parameters (engine load and engine speed) on emission characteristics (unburned hydrocarbons (HC), CO and NOx) of a diesel engine. The optimization of biodiesel percentage in fuel mixture and engine operating parameters also was performed using the desirability approach of the response surface methodology for lower emission characteristics. Th...
Autori: Alireza Shirneshan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27217

In this research, Response Surface Methodology (RSM) was employed to optimize five operating variables including initial pH, current, reaction time, initial hexavalent chromium concentration and dosage of polyaluminum chloride as a coagulant for the removal of hexavalent chromium and its relative operating cost by electrocoagulation process. Central Composite Design (CCD) was applied for the optimization process. The results showed that increase of polyaluminum chloride dosage was beneficial for...
Autori: Sepideh Sadeghi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27230

In this study, an upflow anaerobic sludge blanket (UASB) bioreactor at the mesophilic temperature (38ºC) was successfully used for the treatment of petroleum refinery effluents. Response surface methodology (RSM) was applied for the design and analysis of experiments to predict the behavior of the initial COD and the hydraulic retention time (HRT) in the bioreactor. A statistical analysis indicated that the models adequately represented the experimental data. At the optimal conditions, the ...
Autori: Seyed Omid Rastegar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27233

A large number of microorganisms are capable of producing cellulases; however, fungi are considered among the most active enzymes producers. Different strains of white rot fungi (WRF) were reported to have a great potential for biotechnological applications and cellulase enzymes is much involved in this effect, especially for bioethanol production. Misiones is included in a forest region characterized by a vast biodiversity, and within this environment, a large number of microorganisms can be...
Autori: Ernesto M. Giorgio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27489

The reuse of sewage sludge will be increasing in the future, with expansion of sewerage works and advanced sewage treatments. During anaerobic digestion of sewage sludge from wastewater treatment plants the humification of organic matter will have an important effect on the physico-chemical forms of heavy metals. The aim of our paper was to investigate mobility of zinc from dried anaerobic sludge (DANS) from municipal wastewater treatment plant (WWTP) via single step (simultaneous) extraction pr...
Autori: Vladimír Frišták
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27695

Application of a biological treatment system using white rot fungi is an interesting alternative for treatment of water and wastewater contaminated with persistent organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs). A packed bed bioreactor using the white rot fungi, Phanerochaete chrysosporium (P. chrysosporium) was evaluated for degradation of pyrene and phenanthrene in polluted wastewater. White rot fungi have significant potential to metabolize organic pollutants such as PAHs...
Autori: Mahsa Baniasadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27767

Activated sludge (AS) is the mainly used biological process in water treatment; therefore, assessing the influence of various operating conditions on this process is relevant. This study aimed to evaluate at laboratory-scale the influence of the gas-to-liquid volume ratio (RG/L) and the stirring speed (SS) on the biodegradation of carbamazepine (CBZ) by activated sludge. For this purpose, a central composite design (CCD) was used in association with response surface methodology (RSM). Batch cult...
Autori: Samer Semrany
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27869

In this study, Mg-doped ZnO nanoparticles with 2% Mg content were synthesized by sol-gel method. The structure and morphology of the nanoparticles were characterized by TEM, BET and UV-Vis absorbance techniques. From TEM image, it was found out that the nanoparticles had uniform size and uniform distribution. BET analysis revealed that in comparison with pure ZnO, Mg 2%/ZnO nanoparticles had a higher specific surface area. Based on UV-Vis absorbance analysis, Mg 2%/ZnO nanoparticles shifted t...
Autori: Nahide Zarei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27909