AbstractThe textile industry is a large water consumer. Stringent regulations of wastewater characteristics require the use of membrane processes for the removal of persistent organic pollutants (POPs) from textile wastewater prior to discharge or recycling of these effluents.This paper presents an overview of research related to the removal of persistent organic pollutants from textile industry by membrane processes, discussing also the correlations with actual pre-treatment and removal rates. ...
Autori: , Corina - Petronela Musteret
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25127

Actual trends in papermaking concern on the use of recycled fibers and minimizing effluent volume by closing water circuit. Beside environmental and economic advantages, both trends can lead to serious problems in papermaking processes due to contaminants introduced with recycled fibers and their accumulation in closed water system. A key factor to avoid disturbances in the papermaking is to prevent the accumulation of detrimental compounds. In this respect, first it is necessary to find out met...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25134

AbstractThe paper analyzes some aspects of waste management in Romania and, in particular, in Iasi County, in view of the European perspective. Urban and rural waste management is considered and collection, transport, processing, recycling or disposal of waste materials is discussed relative to the National Waste Management Strategy and the National Plan for Waste Management, as well as European and national legislative framework.It was showed that land disposal will continue to be a disposal op...
Autori: Ana-Maria Schiopu, Ion Apostol, Maria Gavrilescu, Monica Hodoreanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25203

AbstractMunicipal solid waste (MSW) management is an important and challenging issue for sustainable development. It is also one of themost controversial problems and a subject of an ongoing debate between different interested parties. A particularly controversial issue is MSW incineration (with or without energy recovery) which has in many countries become a socially unacceptable option for dealing with solid waste. On the other hand, the increasing amounts of waste each year demand immediate a...
Autori: Adisa Azapagic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25147

This study presents an overview of the current activities and results undertaken within the CEEX SIWMANET project dealing with an assessment of the actual challenges for Integrated Water Resources Management (IWRM) implementation in Romania,seen especially in relation with the R&D system and the need to develop especially the cooperation, training and participatory processes that are required for actual implementation in which the universities may play an important role in terms of catalyst ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25150

Contain all the articles from this issueICEEM /02 PLENARY SESSION:"Environmental Engineering and Management in the Context of Sustainable Development"Design for sustainability (D4S): towards advanced product conceptsHan Brezet, Sacha SilvesterICEEM/02 - ENVIRONMENTAL ENGINEERING SECTION"Water and Wastewater Treatment Technologies"Complex approach to the problem of persistent organic pollutants degradation in water environmentVictor Covaliov, Olga Covaliova, Angela Cincilei, Gilles Mailhot, Pasca...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25176

? Kinetics considerations concerning the oxidative degradation by photo-fenton process of some antibiotics ? Catalytic wet hydrogen peroxide oxidation of 4-chlorophenol over iron-exchanged clays ? Researches on the negative effects assessment (slugging, clogging, ash deposits) developed at the biomass-coal co-firing ? Contribution to the study of the environmental heritage of a former chemical plant ? Impact of chemicals on derivatives with important therapeutic activity in C...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25376

Include urmatoarele articole:� "Waste not, want not" a study of household attitude toward recycling of solid wastes� A kinetic model for the crystal violet mineralization in water by the electro- fenton process� Development of a coagulation/flocculation predictive model for turbidity removal from tehran water treatment plants� Removal of cadmium (II) from aqueous solutions by sphagnum moss peat: Equilibrium study� Environmental sustainability based on fuzzy models� Impact of dust emi...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25207

Include urmatoarele articole:� Cost sensitivity analysis by Monte Carlo simulation� Mathematical modeling of gas drying by adsorption� Methyl isobutyl ketone combustion over Pt/Al2O3 catalyst� Distribution of oxygen transfer rate in stirred bioreactors with simulated broths� Unsteady heat transfer inside an elliptic cylinder� Triphasic external-loop airlift reactors. Hydrodynamic and dispersion studies� Sustainable combined utilization of renewable forest resources and coal in Roma...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25209

AbstractSolid waste management in Malaysia has become an increasingly important task of local government authorities over the recent years as a result of urban population growth, industrialization and an increase in quantity and variation in the types of waste generated. For this reason the government of Malaysia through the Ministry of Housing and Local Government has taken various measures to promote recycling amongst its population. However, a recycling program is only successful if household...
Autori: Abdelnaser Omran, Adam D. Read
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25228

AbstractHollow fiber polyacrylonitrile membranes with three different MWCOs (i.e. 6, 13, 50 kDa) have been tested for dead-end ultrafiltration of a combined refinery and petrochemical secondary effluent. The effluent treatment envisaged further recycling as cooling water make-up following an ultrafiltration/reverse osmosis advanced treatment scheme. Criteria for ultrafiltration evaluation included flux restoration by backwashing, turbidity removal efficiency and water recovery. The membranes cou...
Autori: , Lidy E. Fratila-Apachitei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25258

AbstractAdvanced closing of paper machine circuits results in the accumulation of the dissolved and colloidal substances (DCS) in the process water. At a critical concentration, the DCS are destabilizing even by small variations in paper machine parameters, producing operational and product quality problems. This article presents results of lab experiments simulating the process water recycling in short circuit of paper machine, without and with addition of fixing agents. Tests were performing w...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25261

AbstractIn this paper, the study of synthesis and stability in aqueous solutions of new coordination compounds of Ti(IV) and Zr(IV) with ligand N-hydroxy-succinimide is presented. The salts: TiOSO4¡2H2O and ZrOCl2¡8H2O used for obtaining the studied coordination complexes, can derive from recycling metallic residues resulted in mechanical technologies applied for titanium and zirconium in S.C. ZIROM S.A. Giurgiu.The new complexes were synthesized in aqueous solutions and stability were study u...
Autori: Adrian Cailean, Daniel Sutiman, Doina Sibiescu, Gabriela Apostolescu, Ioan Roşca, Marian Crudu, Mihaela Vizitiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25265

AbstractEnvironmental pollution has posed and continues to cause specific to and complicated problems. The unsustainable production and consumption patterns result in waste that can harm health and the environment. Because of rapid population growth and urbanization, industrialization process and rural to urban migration, solid waste management is becoming more and more critical now, being a problem in rapidly growing urban centers in developing countries. All these threaten the health and well-...
Autori: Abdelnaser Omran, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25275

AbstractPaint sludge of automotive industry contains heavy metals and other toxic substances. Due to this matter, it has a high pollution potential. Incorrect disposal of paint sludge led to kinds of environmental pollution. Recycling and reusing of wastes can be one of the best solutions for decreasing of pollutant entrance to environment. The purpose of this study was to present a new method of extracting the main components of paint sludge, for determining concentration of elements in paint s...
Autori: Azadeh Akhavan Bloorchian, Seyed Mostafa Khezri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25346

AbstractSolid waste management problems proved to be complex in origin and in solution. The rapid economic development and population growth experienced by the State of Penang, Malaysia have resulted in a tremendous increase in the quantities and types of solid wastes generated. Domestic solid waste is the most visible consequence of this economic development. However, considerable amounts of this waste could be recycled and reutilized if separated. This paper reviews the current status of solid...
Autori: Abdelnaser Omran, Abdelsalam O. El-Amrouni, Abdul Hamid Pakir, , Latifa K. Suliman, Mahyuddin Ramli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25353

AbstractAn experimental three-stage subsurface flow constructed wetland system was investigated for the removal of nutrient and organic matter from primary-treated domestic wastewater. Built in the Turkey Scientific and Technical Research Council-Marmara Research Center, Gebze, Turkey (Istanbul), the system consisted of a vertical flow-gravel filtration in the first stage, a horizontalsubsurface flow bed vegetated with Iris in the second stage, and a vertical-subsurface flow bed vegetated Phragm...
Autori: Bilal Tuncsiper
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25358

Include urmatoarele articole:� Environmental Engineering and Management Journal, Vol. 8 Nr. 2� Bioengineering aspects of tissues culture bioreactors for medicine and environmental applications� Removal of bis (1-chloro-2-propyl) ether from wastewater using sonodegradation and biodegradation� A novel plasma reactor for toluene decomposition in contaminated air flow� Study of the copper (II) removal from aqueous solutions by chelating resin Purolite S930 � Analysis of some metal levels...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25371

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

� Physiological changes in seedling germination and growth plant under chemical stress conditions� Studies on sorption and transport processes of cadmium in soils� Assessment of the anthropogenic impact on water systems by fluorescence spectroscopy� Research on the effects of soil improvement by fertilization on the quality of winter wheat� Halotherapy: From ethnoscience to scientific explanations� Study regarding the sorption of erythrosine from aqueous solution onto soil� Hydroxy...
Autori:
ISSN: 1582 - 9596
http://www.ecozone.ro/reviste.php?RID=25375

AbstractThe purpose of this study is to analyze the recycling potential of printing papers, which are obtained by two different filler loading processes: conventional loading by direct addition of calcium carbonate to cellulose fiber suspension and in-situ loading by precipitating calcium carbonate within cell wall and lumen of pulp fibres. In order to evidence the influences of the both filler content and loading method, a reference sample for recycling was obtained without filler, but using th...
Autori: Maria Ciobanu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25386

AbstractThe use of adhesives for floor covering have been deeply modified for longtime, by formulations of polymer-based products in aqueous dispersion as an alternative to organic solvents. These advances envisaged ways for obtaining nonpolluting products. Developing these adhesives required the parallel development of methods for monitoring and analyzing the emissions over time. This paper shows the results of some research devoted to identify the indoor presence of volatile organic compounds ...
Autori: Irina Ioniţă, Domnica Ciobanu, Monica Tulbure, Iulian Tanţoş
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25388

AbstractUltrafiltration (UF) represents an important option for the advanced wastewater treatment as it offers good performances from both technical and economical points of view, for the removal of suspended solids, colloids and some of the organic compounds present in different effluents. The occurrence of priority organic pollutants in wastewaters streams and the environment has raised intensive scientific debates about their effects and the possible abatement technologies. As part of a broad...
Autori: George Barjoveanu,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25390

Abstract Taking into account the statistical data gathered in two previously published papers concerning the pollution sources in the production sector, namely Finishing section, various solutions are proposed for wastewater treatment. Bearing in mind the results obtained through the sampling method on different types of water in the urban sanitary sewer system, the conclusion was that the most convenient alternative, besides the source control is the treatment in wastewater treatment plants...
Autori: Irina-Isabella Savin, Romen Butnaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25408

Abstract Textile industry is one of the most pollutant and water consuming industries. Large quantities of water are required in materials preparation and dyeing, so consumption and waste generation have become serious concerns for textile manufacturers and finishers. Textile effluents are characterized by high values of quality indicators such as BOD and COD, suspended solids and heavy metals. A serious environmental problem and also an aesthetic problem is the color of the effluent. Reactiv...
Autori: Daniela Cailean, George Barjoveanu, Corina - Petronela Musteret, Liliana Rozemarie Manea, Nicolae Sulitanu,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25420

Abstract This paper aims to propose a new solution for rational valorization of the secondary powder materials from steel makingin electric arc furnaces. The elaborated steel quality as well as the economical advantages represented by secondary powdermaterials recirculation were studied. A good correlation between the proportion of brickets loaded into the melt and the melting ofcarbon has been found. The proportion of the EAF dust brickets can grow even at 5-7%. Zinc presence could havenegat...
Autori: Mirela Gabriela Sohaciu, Avram Nicolae, Cristian Predescu, Stefan Velicu, Gheorghe Gh. Calea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25438

Abstract The paper presents actual trends concerning the selective collection of the household waste. The collecting methods used in the EU countries and the results obtained by the Romanian municipalities in the last two years are also exposed. The results show thedynamics of household collection and the expectations for the next years. It is known that a town of 100 000 inhabitants collecting 100% of its household recyclable packaging waste could recycle 780 tonnes of steel, 200 tonnes of a...
Autori: Liana Baltes, Camelia Draghici, Camelia Manea, Dan Ceausescu, Mircea Tierean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25440

Abstract Literature data show that in general, plastics produced through the mechanical recycling route involve less carbon dioxide emission than when produced from crude oil. A review of readily available data shows that road transport of untreated waste plastics account for a significant portion of the carbon dioxide emission generated during recycling. Therefore, much carbon dioxide emission can be saved by optimizing the logistics in the recycling of plastics. On the example of polyolefi...
Autori: Peter C. Rem, Stig Olsen, Jan-Henk Welink, Norbert Fraunholcz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25442

Abstract The mass of usage of secondary plastics are mostly determined by their quality and price. Therefore it was essentially to collect and evaluate the related aspects and expectations from the potential secondary-plastics users. To enable this in the frame of the W2Plastics EU7 project (Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste) an adequate questionnaire was worked and sent out to automotive plastics end-product man...
Autori: Andrea Toldy, Brigitta Bodzay, Mircea Tierean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25443

Abstract The European annual consumption of plastic materials has increased from 24.6 Mtons in 1993 to 39.7 M tons in 2003 and it is likely to keep growing. Europe is faced with the challenge of managing millions of tons of waste plastics. At the same time, polymer recyclers and manufacturing industries do not find enough secondary polymers of consistent quality. Plastics production and use has a range of environmental impacts because of the considerable quantity of resources needed as raw ma...
Autori: Peter Rem, Venga Solaria, Francesco Di Maio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25444

Abstract The synergistic combination of polymers and inorganic compounds via sol-gel process has attracted great attention, by manipulating structure at molecular level, for developing new materials with desired properties. These new hybrid materials could have a controllable combination of the benefits of polymers (flexibility, toughness, ease of processing) and those of ceramics or glasses (hardness, durability, thermal stability). The microstructures and the properties of hybrid materials...
Autori: Lucia Dumitrescu, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25446

Abstract The waste recycling done in order to obtain composite products with performant properties and also, with long life cycle is the main purpose for the sustainable development. The present paper describes the way in which, different kind of solid wastes are immobilised in an organic resin as a binder matrix. Composites with different proportion of waste as, rubber/plastic, glass and silica sand have been obtained. The physical-mechanical properties and chemical stability of such organic...
Autori: Ioan Ropota, Emilia Zamfirache, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25450

Abstract In the new millennium to sustain a healthy life in harmony with nature, it will be extremely important to develop various materials and processes that minimize any harmful influence on the environment. The feasibility of sludge recycling in the brick manufacture was evaluated through laboratory testing. Several ceramic masses with clay, sand and various proportion of sludge have been synthesized and than characterized by their physical-mechanical properties. Sludge fineness also has ...
Autori: Ana - Maria Szoke, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25454

Abstract Certain conventional and alternative carbon-based electrodes, i.e., glassy carbon electrode (GCE) and, commercial boron-doped diamond electrode (BDDE) were investigated and compared for the electrochemical determination and degradation of 2,4-dinitrophenol (2,4-DNP). The electrochemical behavior of electrodes in the presence of target pollutants was investigated using cyclic voltammetry (CV), chronoamperometry (CA), and multiple-pulsed amperometry (MPA). The duality of the electrode ...
Autori: Adriana Bebeselea, Cristina Proca, Florica Manea, Ciprian Radovan, Georgeta Burtica, Joop Schoonman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25469

Abstract Waste management hierarchy has as priorities waste recycling and energy recovery. Unfortunately, Romania is in the situation so as the waste landfilling is still considered as a suitable solution for waste management. European Union imposed a number of regulations and programs in the field of waste treatment and management that Romania must comply. The paper describes some aspects regarding characterization of the leachate originating from the Tomesti landfill (situated in Iasi County...
Autori: Ana-Maria Schiopu, Brindusa Mihaela Robu, Ion Apostol, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25523

Abstract The work studies the orientations regarding the recycling of the products from the industry of auto-vehicles parts and components, orientations that can provide solutions which permit to the enterprises producing auto components the efficient management of the related products and services during the whole life cycle of the products, from the conception phase to that of recycling. The new way of approaching the development of metallic auto products promoted in Romania will contribut...
Autori: Petrica Corabieru, Stefan Velicu, Dumitru Zait, Anisoara Corabieru, Dan Dragos Vasilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25524

Abstract A friendly technology with the environment which consists of the elaboration of carbon steels through specific proceedings to powder metallurgy has in view the contribution of methane gas in iron powders at the same time with sintering. This technology is advantageous from various points of view: the final product is a part which does not need afterward processing with solid waste result and therefore the specific energy consume is lower, the wear and corrosion behavior is similar to...
Autori: Olimpia Ghermec, Cristian Ghermec, Traian Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25526

Abstract Life Cycle Cost Analysis (LCC) and Social Life Cycle Analysis (SLCA) are available methodologies for the economic and social assessment of a product or process along its life cycle. Different approaches regarding LCC and SLCA have recently emerged and several hypotheses are currently on testing and discussing. This paper shows existing LCC and a SLCA approaches as well as the methodology applied in the particular case of a paper recycling process. This study gathers part of the Europ...
Autori: Beatriz Ferreira Pozo, Antonio Dobon Lopez, Carlos Lopez Lopez, Maria Calero Pastor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25529

Abstract In the textile finishing and dyeing industries, the total volume of water consumed is around 150 millions tons/year, and thus very large quantities of water are processed and produced as wastewater by textile plants. Quality indicators of textile wastewaters, like BOD and COD, have values which, in some cases, exceed 5 times the maximum concentration value (allowed by the national quality standards). One of the greatest concerns in wastewater treatment of a textile effluent is the co...
Autori: Daniela Cailean, , Florin Brinza
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25538

Abstract This paper introduces and analyses the results of some research regarding the recovery of fine chips from the slurry resulted from the finishing operations (grinding) of the parts used in automobile industry. Little chips, in the form of slime, represent a very important source of raw materials when preparing the powders and at the same time it can be appreciated that the volume of these chips in the form of slurry is high enough so that its use can substantially diminish the product...
Autori: Olimpia Ghermec, Cristian Ghermec, Marin Didu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25552

Abstract The Integrated Water Resources Management (IWRM) concept evolved over time, the focus on river basin management, consultation and coordination with all water users, and the use of the â€?polluter pays?? principle being all included in the EU Water Framework Directive (EC Directive, 2000), which forms the basis of water management undertaken in Europe. The role and significance of water resources for sustainable development, as well as the water crisis experienced nowadays are ...
Autori: , Claudia Cojocariu, Corina - Petronela Musteret, Ioana Gabriela Dascalescu, Ionut Caraene
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25559

Abstract In Europe, recovered paper is a valuable raw material for the paper industry already since the early 20th century, actually corresponding to half of the total use of fibres for paper and board production. The aim of this paper is to describe the present status of paper recycling in Europe and thereby to create a data basis for evaluation the results of the FP7 project ?Recovered Paper Sorting by Innovative Technologies ? SORT IT. The overview is based on specific questionnaires addre...
Autori: Dan Gavrilescu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25579

Abstract The Environment Action Program foresees the development of a Thematic Strategy concerning the sustainable use of natural resources and waste management (Report EUR 21002 EN, 2004). In this context, the activities regarding the research and industrial development related to waste valorization through recycling and reusing have been grown. The wastes resulted from the fine ceramic technological process (scraps, used molds etc.) may be valorized. The used molds can be valorized in other...
Autori: Ion Balasanian, Liliana Lazar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25582

Abstract Despite their success, the so-called Italian Industrial Districts (IIDs) have to face the crisis caused by the phenomenon of globalization. The paper presents the interventions carried out in two industrial districts, tannery district of Arzignano and artistic glass district of Murano, in order to help the public administrations to improve the environmental situation. Introducing strategic and social considerations in environmental initiatives and implementing ?radical? environmenta...
Autori: Flaviano D'Amico, Giulio D'Amico, Ion Tanase, Marian Mihai Buleandra, Mihaela Buleandra
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25603

? RESEARCH ON NaCl SALINE AEROSOLS I. NATURAL AND ARTIFICIAL SOURCES AND THEIR IMPLICATIONS ? DECISION SUPPORT MODELS FOR SOLID WASTE MANAGEMENT ? AN OVERVIEW ? POLICY AND STRATEGY FOR IMPROVING SUSTAINABLE SOCIAL DEVELOPMENT PROGRAMMES ? APPLICATION OF SHALLOW POND SYSTEM USING WATER HYACINTH FOR DOMESTIC WASTEWATER TREATMENT IN THE PRESENCE OF HIGH TOTAL DISSOLVED SOLIDS (TDS) AND HEAVY METAL SALTS ? TRENDS OF THE COMMUNITARIAN COHESION POLICIES AND ADVERTISING FOR EC...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25658

? Environmental Engineering and Management Journal, Vol. 9 Nr. 4 ? THE PROTECTION OF EQUIPMENTS USING VOLATILE INHIBITORS ? CONTINUOUS SURFACE TEMPERATURE MONITORING TO ESTIMATE SENSIBLE HEAT LOSS BY BUILDING FINISHES ? RECYCLE OF POLYAMIDE DYEING WASTEWATER FOLLOWING DECOLORIZATION WITH POLYMERIC SORBENTS ? PERFORMANCE EVALUATION OF AMINO ACID SALT-BASED COMPLEX ABSORBENTS FOR CO2 CAPTURE ? ADSORPTION EQUILIBRIUM STUDIES ON COPPER (II) IONS REMOVAL BY NATURAL WASTE USIN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25666

Carbon issue is becoming more important all over the world. Plate glass is a typical kind of building materials and the life cycle carbon emission of plate glass is a big contributor, resulting from the energy consumption in the stages of its life cycle which includes four aspects: raw materials acquirement, materials transportation, production and embodied consumption of energy carriers. Based on the relevant data calculation from China’s condition, the life cycle carbon emission of plate gla...
Autori: Meng Liu, Wenlong Li, Qunying Cheng, Yueer He, Xinyun Caohttp://www.ecozone.ro/reviste.php?RID=25672

Abstract:Composite manufacturing from plastic wastes of polyethylene terephthalate (PET) type, sand-blasting represents a materialrecovery of the wastes. This process can be achieved, with the purpose of reducing the material consumption which is in deficit,production costs, and the duration of the technological processes.Thermoplastics composites obtained by a melting process at 170-200 oC, wastes incorporation and solidification in forms replacesuccessfully the thermo rigid composites obtained...
Autori: Ioan Ropotă, Marcela Muntean, Mihai Bratu, Ovidiu Dumitrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25741

Abstract:This technical paper presents some aspects concerning the static finite element analysis of a wind turbine blade. For themanufacturing of the blades for a 10 kW wind turbine elaborated at the Technical University of Moldova composite materialsmade up of polyester matrix reinforced with fiber glass are being used. In order to determine the mechanical properties of theproposed composite materials 10 different samples of laminated composite plates were numerically simulated in ANSYS 11....
Autori: Marin Guţu, Viorel Bostan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25747

Abstract:The hereby article presents a part of the results of the research made by the author during his PhD degree preparation with respect to asbestos and plastics wastes recycling in the form of composite with polymeric matrix, respectively the toxicological tests performed on the new product. In this respect, three categories of tests were made based on complex and modern analysis methodologies, with high results accuracy: spectral analysis of the wear wastes, morphological analysis of the w...
Autori: Cristina Corpodean, Silvian Ionescu, Valeriu Deac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25812

This paper refers to the post-Darcy free level uniform filtration. The capillary tube fascicle model is applied to this filtration. The theoretical Ch?Šzy coefficient is computed and also experimentally verified for a homogenous and isotropic material, made of glass spheres. The typical features for the free-level post-Darcy filtration (depending on slope) are the lover, critical and higher stages flows....
Autori: Aron Gabor Molnar, Daniel Toacă, Daniel Toma, Iosif Bartha, Nicolae Marcoie, Victor Gabor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25833

This paper is part of LCA studies performed in the frame of FP7 project �Recovered Paper Sorting by Innovative Technologies - SORT IT�. It analysis the results obtained by Life Cycle Impact Assessment (LCIA) of the reference case for recycled packaging paper manufacturing (current sorting technology), which will constitute a comparison base for new sorting technology developed in SORT IT project. The main stages considered in the life cycle were: recovered paper (RP) transport from collectio...
Autori: Alina Iosip, Antonio Dobon, Elena Bobu, Mercedes Hortal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25860

Nowadays, advanced wastewater treatment has become a stringent step for the removal of priority organic pollutants and many technologies have been proposed in order to achieve effluents with a superior quality for recycling or reuse purposes. This research is focused on the possibilities of using an integrated process, comprising 2 stages: the advanced oxidation process of ultrasonication and a membrane separation process, ultrafiltration. The main objective of the study is to assess the efficie...
Autori: , Daniela Cailean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25880

AbstractConsumption and related waste production is an integral part of our daily lives. The waste generation worldwide depends on theeconomic strength of the given region/country, and it increases from year to year. More and more attention is drawn to the re-use,recycling, reutilization of the waste which are driven mainly by environmental concerns and economic interests. Regional wastemanagement systems have been established in Hungary with the support of EU funds, which process the waste acco...
Autori: Ákos Rédey, , Attila Sarkady, László Dióssy, Róbert Kurdi, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25970

AbstractWastewater streams and particularly industrial effluents tend to increase in volumes and to get more complex in terms ofpollution. Nevertheless, nowadays the focus is directed towards recycling or reuse of treated wastewater so as to close the wateruse loop. Advanced wastewater treatment allows these possible applications by achieving good quality effluent to suit the newpurposes, but the implementation of this treatment stage is a difficult task. This study gives an example on how to ap...
Autori: , Daniela Cailean, Florina Ungureanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25971

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

AbstractThe waste management is increasingly important from the point of view of our future and to keep our environment safe for thefuture generations to come. The European Union sets up strategic objectives and goals on priorities and actions in the field ofwaste management. The Waste Framework Directive 2008/98/EC stipulates and sets forth the goals and actions for the nextdecades. The paper deals with the European strategy and the Hungarian practices with special focus on the North-Balatoncom...
Autori: Ákos Rédey, Attila Sarkady, László Dióssy, Róbert Kurdi, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25986

AbstractEU policy on waste management stresses the importance of an integrated approach to waste management, which includesconstruction of waste disposal facilities with prevention of waste generation and recycling, in line with management hierarchy:prevention of waste and its negative impacts; recovery of waste through recycling, reuse, safe final disposal of waste where thereis no possibility of recovery.This paper address the issue of municipal waste management and the impacts generated into ...
Autori: Ana-Maria Şchiopu, Cristina Ghinea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25987

AbstractThe increased concentrations of priority pollutants in wastewaters have imposed the completion of conventional treatment withadvanced treatment stages (such as catalytic oxidation, membrane processes, adsorption, ion exchange, etc.) for their removal bychemical degradation and/or physical separation.In this study, 4-chlorophenol (4-CP) is proposed as model-pollutant for the priority organic pollutants present in syntheticwastewaters and several processes which can act as advanced treatme...
Autori: Carmen Teodosiu, Corina Petronela Musteret, Daniela Arsene, Daniela Cailean, George Bârjoveanu, Petru Apopei, Roxana Elena Apreutesei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26022

AbstractThe paper presents the research made on the FP7 project „Magnetic Sorting and Ultrasound Sensor Technologies for Productionof High Purity Secondary Polyolefins from Waste” in order to develop a magnetic fluid equipment for sorting of polypropylene(PP) and polyethylene (PE) from polymers mixed waste streams. Because both PP and PE float in water, it is difficult to separateone from the other. The paper presents the principles of inverse magnetic density separation process and the results ...
Autori: Bin Hu, Francesco Di Maio, Guillaume Houzeaux, Liana Baltes, Mircea Tierean, Peter Rem
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26028

AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

The book edited by Haibo Xie and NicholasGathergood focuses on one of the most importantscientific issues of the 21 century which is thereplacing fossil fuel with sustainable alternatives suchas biomass. Fossil fuels are conventional rawmaterials for many industrial sectors includingchemical and energy production. Usage of fossil fuelis limited by their availability, price and carbonfootprint. Biomass is a renewable resource globallyavailable, cheaper and carbon sequestering. Step bystep shiftin...
Autori: Adrian Catalin Puitel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26101

Abstract Waste recycling represents a very significant issue for the protection of our environment. Large waste quantities (slag and ashes) are products of the coal extraction industry and its subsequent combustion in thermal power stations. The possibilities of obtaining crystallized glasses in the CaO-Al2O3-Fe2O3-SiO2 system by introducing in the raw materials mixture ashes from Mintia Deva thermal power station have been studied. The physical and chemical characterization of the...
Autori: Firuţa Goga
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26121

Abstract The main purpose of this paper is to identify, highlight and analyze the recycling possibilities for the activated glass derived from the treatment of the cathode ray tubes (CRT) waste equipment and to demonstrate the recycling viability, economical and environment protection efficiency. A total of 95 pieces of waste electronic equipments (TVs and PC monitors) were processed and a number of five TVs and five PC monitors from the ‘95s were analyzed. Significant quantitie...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26124

Abstract Over the last years an increasing number of retailers have undertaken green marketing-specific actions with the purpose of not only bolstering their reputation but also of improving their awareness, increasing their trust or enhancing the target groups’ appeal for the company. These actions/measures will eventually exert a positive effect on how customers perceive retailers. Once a proper, positive and proactive image has been developed in consumers’ mind, the chance of ga...
Autori: Dan-Cristian Dabija
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26129

AbstractThe aim of this work consists of presenting the need to improve the tributary regulation in order to stimulate the suitablemanagement of the water in the process of production of the wine. In this sense, it is analyzed the influence of the cost of thewater and the different taxes associated with the discharge of wastewater in order to encourage the system implantation of water recycling in the wine-producing Spanish industry. For that, it is studied the actual case of a winery, of its ne...
Autori: Isabel M. Román-Sánchez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26193

AbstractIn this study, as part of developing a green recycling process of spent lead-acid battery that can avoid both smelting and electrowinning, leaching agent citric acid and other additives (such as sodium citrate and hydrogen peroxide) in aqueous media were reacted with spent lead-acid battery paste. PbO, PbO2 and PbSO4, which are the three main components in a spent lead-acid battery paste, were leached to form lead citrate precursor which was crystallized and then separated from the solut...
Autori: Xinfeng Zhu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26215

AbstractThe paper analyses the opportunity of recycling sewage sludge in the manufacturing of ceramic building materials. Wastewatertreatment plants (WWTP) produce annually a great volume of sludge and its processing become more difficult. On the otherhand, there is an increased need to develop new alternatives beyond the already known methods. The use of WWTP sludge asraw material for the production of bricks may become an interesting alternative, both from an industrial and environmental point...
Autori: Anna-Maria Szőke
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26251

AbstractThe construction industry is one of the main sectors of energy consumption and carbon emissions in China. The new-types ofbuilding materials can be produced by recycling industrial solid wastes which is an effective solution to development of greenbuilding materials and abatement of environmental emissions. In this paper, new-types of bricks made of fly ash (residuesgenerated in coal combustion) and coal gangue (a kind of solid wastes generated in coal mining and coal production) and the...
Autori: Haitao Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26265

AbstractWaste Electrical and Electronic Equipment (WEEE) is increasing day by day more than the amount of municipal wastes in thedeveloping world. According to researches of Ministry of Environment and Urbanism in Turkey, to meet growing waste demandin all regions, 850 collection points for the district municipalities and 15 large collection centres are needed. From this point ofview, in this study, the site selection of the plants used for planning and recycling of electrical and electronic equ...
Autori: Müfide Banar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26268

AbstractAs a typical environment-economy linking system, recycling and its efficiency measurement with a triple-bottom-line (TBL)thinking, increasingly play an important role in the development of real economies and environmental protection. Since theclassic black-box-based data envelopment analysis DEA model may over-estimate the operation performance of a decisionmaking unit (DMU), this paper describes a novel network based on DEA model to narrow the gap between the DEA theory andpractical nee...
Autori: Huaqing Wu, Qiong Xia, Weidong Zhu, Yixian Liu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26362

AbstractIn Romania’s industrialized areas there are a large number of people, and therefore the amount of generated waste becomesimportant. Moreover, waste management activities have a high share in local and national administration. Prahova County hadthe highest national average density of 62.83 inhabitants/km2. With two major cities, Ploiesti and Campina, the composition ofthe urban and rural waste stored in landfill does not always respect the existing norms at national and local level. The s...
Autori: Casen Panaitescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26423

AbstractThe researches were initiated in the context emphasized by the competition having the idea of profit at its base, and sustainabledevelopment, which imposes limitations through different regulations and standards which would involve supplementary costs.The research highlights the main trends in plastic product design in conditions of sustainable development of society. Plasticshave an important role in the configuration of the new products just in the phase of conception. Having in mind t...
Autori: Petrica Corabieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26472

AbstractMunicipal solid waste management is a matter experienced by the entire world, mostly encountered in urban areas as a result ofpopulation growth and increased income per capita. This issue always posed threats to environmental quality and human health,and continues to be one of the major environmental problems people continues to face. In the last few decades, the systemsanalysis techniques have been applied to manage the municipal solid waste (MSW) streams through a range of integrativem...
Autori: Cristina Ghinea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26481

AbstractThe paper presents a hybrid method for the advanced removal of low biodegradable organic compounds from water, bycombining the separation selectivity of the membrane with the oxidation efficiency of the photocatalytic process. The aim of thisstudy is to evaluate the performance of the hybrid method to remove toxic compounds from wastewater. The advanced oxidationprocess, based on a photocatalytic reactor with continuous recirculation, ultraviolet (UV) radiations and a membrane, was usedf...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26490

AbstractWater recycling and reuse, answering the needs of creating cleaner water resources, need to be closely related with water resourcemanagement and technologies. Current municipal wastewater treatment plants are capable to control conventional pollutants(carbonaceous compounds, particulate matter, nutrients). Priority organic compounds, like polyaromatic hydrocarbons,polychlorinated biphenyls, endocrine disrupting chemicals, personal care products, pesticides etc., may escape the treatment ...
Autori: Andreea Chelba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26521

AbstractAnaerobic degradation (AD) of municipal solid waste (MSW) depends on the moisture and nutrient distribution within thebioreactor; these factors are affected by leachate recirculation. In this work, the effects of leachate recirculation of 15 to 120 byvolume percentage (%V) on AD were studied. The ojectives of this study are as follows: a) to determine which recirculation rateprovides the best conditions for accelerated anaerobic degradation (AD) and b) to determine the optimal range of r...
Autori: Maria del Consuelo Hernández-Berriel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26557

AbstractThe aim of this work is to study the valorisation of two regenerated low density polyethylene (LDPE) coming from dirty wastesby blending with polypropylene (PP) in presence of compatibilizer. The first step was the determination of the physico-chemicalproperties of the two regenerated samples (density, melt flow index, water absorption, melting temperature and oxidation index)and the mechanical properties (tensile and shore D hardness).The second step was the characterization of the phys...
Autori: Nabila Guerfi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26565

AbstractThe CO2 electroreduction in gas phase using Pt on carbon black catalysts is investigated in this work. This process is expected tobecome a key technology to prevent anthropogenic CO2 emissions. Specifically, the electrocatalytic reduction in a solventless gasphase is studied, as a first approach to later develop a photoelectrocatalytic device for the efficient conversion of CO2 to fuelsusing solar energy for the reaction. The objective of this preliminary work has been the tuning up of t...
Autori: Fabiola Martínez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26578

AbstractThe general aim of this paper is to demonstrate the sustainable management of a broad spectrum of wastes (livestock, industrial,agri-food, agricultural and non-recyclable fraction proceeding from waste treatment plants) in an integrated plant. Thetechnological development and practical application of the “Mixed Plant” concept is used to achieve this objective. In order tovalorize in a joint form all the above-mentioned categories of waste, two different processes have been integrated. Th...
Autori: Dolores Hidalgo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26579

Abstract This study has an exploratory character, aiming to perform an analysis of the manner to approach the green marketing and the activity of selective collection of waste in Romania. The objectives of this study are indissolubly linked to the fact that currently, Romania does not develop a marketing strategy in terms of waste management. By processing data regarding the municipal waste situation from national and European level, we aim to provide a picture of the actual situation, based...
Autori: Florin Alexandru Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26608

Abstract This study examined the characteristics of geopolymer with solar panel waste glass. After 28 days of curing, the compressive strengths of the geopolymer samples containing 10 mass % and 20 mass % solar panel waste glass were 63.3± 1.8 and 49.1 ± 2.2 MPa, respectively. The geopolymer sample with 10% solar panel waste glass exhibited a stronger reaction than that with 20% solar panel waste glass, and the strength decreased as the amount of solar panel waste glass increas...
Autori: HuiCong Hao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26621

Abstract During the creation of a product, the majority of the enterprises still apply a linear approach. This approach has been imposed by the organization way of the company and by the informational flow between the different departments. In the present time different models of integrated engineering oppose to the sequential organization. These models permit the simultaneity of the activities deploying or at least their partial overlap. The activities overlap can be imagined eliminating fi...
Autori: Petrică Corăbieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26633

Abstract It is widely accepted that public support is vital to the success of most recycling programmes. The actions of householders are paramount to the success of any sustainable waste management policies whether local, regional or national. This paper presents a study of householders’ attitudes to recycling of solid wastes in Malaysia, which supports the idea that careful planning and design are critical for the success of a new recycling programme. A postal questionnaire survey was...
Autori: Abdelnaser Omran
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26636

Abstract Temperature-dependent d.c. electric conductivity of some recently synthesized organic compounds, 4,7-phenanthroline derivatives is studied. Thin-film samples (d=0.34-0.63 m) spin-coated from dimethylformamide solutions onto glass substrates have been used. Organic films with reproducible electron transport properties can be obtained if, after deposition, they are submitted to a heat treatment within temperature range of 298523K. Examined organic compounds in thin fil...
Autori: Cristina M. Al Matarneh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26656

Abstract Large quantities of snail and clam shells are left as waste material when their meat is used as food for people. It has been a big problem that how to treat these wastes and usually these are land filled as wastes. In the present paper, these shells are studied as recycling resource for phosphate removal from solutions. Laboratory-scale batch experiments were conducted to evaluate the efficiency of snail and clam shells in removing phosphate from aqueous solutions. Major factors inv...
Autori: Ji Bing Xiong
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26727

Abstract The aim of this paper is to determine the heat of combustion of plastic wastes resulted from municipal solid waste, automotive shredder facility waste and building and construction waste. The plastic wastes have been separated by flotation technique using as flotation media: water, ethanol, their mixtures and magnetic fluid. Resulted fractions have been analyzed aiming to determine the most effective fraction from the heat of combustion point of view. The obtained results have been ...
Autori: Liviu Costiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26750

Abstract The aim of this study is to analyse Romanian situation regarding packaging waste generated and to find out how the targets imposed after integration were accomplished, based on data collected and published by Eurostat, as well by other publications. The municipal solid waste collection practice in Romania is based on mixed collection (approximately 96% of waste generated), without or with minor sorting at source. Waste recovery is applied to small percentages and only for certain ca...
Autori: Carmen Luiza Costuleanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26764

Abstract This study is focused on the removal of leachable lead present in CRT (cathode ray tube) glass employing different chelating agents, NTA (nitrilotriacetic acid) and ATMP (amino trimetilen phosphonic acid), and then on the evaluation of their extractive capability. The operating conditions are the following: T=80°C, t=1h, pH=10, solid/liquid weight ratio=1/10, reagent concentration= 0.1 M. Afterwards a number of leaching tests at controlled pH were performed in the 5-9 range for ...
Autori: Elena Bursi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26772

Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

Abstract The increasing diffusion of Hi-tech complex products has raised the attention of scientific community towards their End of Life (EoL) treatment, both in terms of assuring an appropriate disposal, to avoid the dispersion of harmful substances, and at the aim of their exploitation as valuable sources of raw materials. Within this study an integrated approach for waste electrical and electronic equipment (WEEE) end of life treatment is proposed based on the integration of hydrometallur...
Autori: Claudia Brunori
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26777

Abstract The recovery of raw materials from waste represents a sustainable growth opportunity for those countries with limited mineral resources availability. A case study for an integrated approach to recover raw materials from spent fluorescent lamps is presented, with the aim of improving the current treatments which are only able to recover the glass fraction. In particular a hydrometallurgical process was developed to obtain valuable metals such antimony, copper, and rare earths (yttriu...
Autori: Roberta De Carolis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26782

Abstract The amount of collected Waste Electrical and Electronic Equipment (WEEE) in Europe is growing about 7 wt.-% per year (2007- 2012). It contains a number of economically relevant base, precious and high-tech metals. However, only a limited number of these metals can be recovered by currently applied recycling processes. Especially high-tech metals like gallium, germanium and tantalum get lost during the treatment of WEEE. The pyrolysis technology allows an accumulation of these metals...
Autori: Peter Hense
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26785

Abstract The European Commission has introduced a whole range of policies and initiatives to promote the product eco-innovation and the environmental impacts reductions. One of the key topic for the reduction of the environmental impacts is the waste recycling and reuse (turning waste into useful resources). A teamwork of Politecnico di Milano has developed a research work, still ongoing and continuously updated, called “The usefulness of the useless. Cross-sectorial evaluation of wast...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26788

Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

Abstract Recently several innovative suggestions on how industrial wastes can be utilised in new products have been presented in literature, e.g. as filler or additives in concrete, incorporated in ceramic materials to produce glass-ceramics and pavement construction. In this work, metallurgical materials from secondary aluminium scrap processing and glass waste derived from treatments of packaging and fluorescent lamps were considered for fabrication of new ceramic materials using powder te...
Autori: Rosa Taurino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26794

Abstract The objective of this paper is to propose an optimal path for a circular economy strategy of Aluminum Corporation of China (CHINALCO) by constructing a circular economy evaluation model. Based on CHINALCO’s resource circulation and the regularity of material balance, and by depicting the value information in the process of resource input, consumption, output and waste, we build a comprehensive evaluation model for the enterprise circular economy - a resource value flow equatio...
Autori: Fei Xiong
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26815

Abstract The recycling and later use of construction and demolition waste (C&D waste) as construction materials present a strategic inconvenience for many stakeholders involved in the sustainable construction. In some countries, the recycling percentage of C&D waste is around 80% of the C&D generated. However, in other countries this percentage is much lower. This complexity requires a better understanding of the recycling dynamic. In the specific case of Spain, the National Inte...
Autori: Nuria Calvo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26817

Abstract The recycling of plastic waste is important both in the conservation of resources and the environmental protection. A plastic waste (PE/PP/PS/PVC) was pyrolyzed over a series of post-use FCC catalysts using a fluidizing reaction system similar to the FCC process operating isothermally at ambient pressure. Experiments carried out with these catalysts gave good yields of valuable hydrocarbons with differing selectivity in the final products dependent on reaction conditions. A model ba...
Autori: Ta-Tung Wei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26836

Abstract The feasibility of treating tannery wastewater having high organic loads was studied using ceramic membrane based microfiltration process. The common effluent treatment plant (CETP) of a centralized leather complex was selected for the study which accommodates about 450 tanneries in the city, processing hides from raw to finished products. Effluent sample was collected from different locations of the CETP, i.e. untreated composite effluent, effluent from primary clarifier and from ...
Autori: Priyankari Bhattacharya
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26837

Abstract The atmospheric air is considered a large and renewable source of fresh water. The present work investigates the application of solar energy to heat wick clothes impregnated with calcium chloride to extract water from atmospheric air. A wick desiccant solar collector is erected at Tanta – Egypt for this purpose. The desiccant concentration at the beginning of regeneration is determined according to the climatic conditions. The saturated wick desiccant is exposed to an ambient ...
Autori: Abd elnaby Kabeel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26861

Abstract This paper analyses mass and energy balances of some Integrated Municipal Solid Waste Systems (IMSWS) focusing on MSW sorting, treatment and energy recovery conversion chains suitable for the last entries into the European Union (EU). In particular the Romanian case-study has been developed as reference scenario. In this context the actions timelines for the case-study are immediate (S1A), midterm (S1B) and long term (S2). In the scenarios S1A, S1B a poor selective collection (SC) i...
Autori: Gabriela Ionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26878

Abstract Ash resulting from wood combustion constitutes a waste disposal problem to facility owners. The use of ash fertilizer or soil amendment could provide nutrients for agriculture if its nutrient content is adequate and it does not contain harmful amounts of heavy metals. The recycling of nutrients bound in ash would provide an inexpensive solution to waste problem. In our study, we aimed to characterize ash and clinker resulted from incineration of oak waste resulted from wood industry...
Autori: Ioan Oroian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26885

Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

Abstract Poly(vinyl chloride) (PVC) is the most widely used material for the production of medical devices such as intravenous fluid bags and tubing, enteral feeding, dialysis equipment and catheters. Despite of their numerous advantages, the plastic medical devices are non biodegradable and prone to microbial colonization causing biofilm associated infections which are difficult to treat and tend to chronicisation. A possible solution to surpass these limitations could be the fabrication of...
Autori: Petruța Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26894

Abstract In Palestine, environmental problems associated with industrial solid waste (ISW) have increased significantly in recent years. This paper presents survey results on current industrial solid waste management (ISWM) practices in the governorates of Nablus and Ramallah & Al-Bireh, Palestine. Solid waste generated from industries was quantified, characterized and discussed in terms of generation rate, storage, reuse/recycling, transportation, and final disposal. An attempt was made...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26903

This paper presents municipal solid waste (MSW) responsibility and management structure in Sinop, Turkey together with the current situation of collection, recycling, transport and disposal of MSW. In order to examine the MSW management, a longterm study was conducted between 1994 and 2010. In this study, physical composition of MSW was determined. Proximate analysis (moisture content, density and calorific value) and ultimate analysis (carbon, hydrogen, oxygen, nitrogen, sulfur and ash) of ...
Autori: Nurdan Gamze Turan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26925

In the context of sustainable development, focus must be set on reasonable use of natural and energetic resources, which is a real must at present. Besides these, material and informational resources add up to give the full picture of sustainable development resources. The paper introduces a valid solution of powdery waste recycling into pellets for the steelmaking industry. The pellets are obtained from powdery wastes (steel plant dust, red sludge, lime dust, dolomite waste, waste limestone,...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26944

Waste recycling in steel industry by turning grain-size and powdery waste into pellets is a must now more than ever for economical motivation, in order to save raw materials and also for ecological reasons, as it leads to a cut down in the quantity of dumped waste. Industrial practice offers processors various technologies of waste recycling (agglomeration, briquetting, pelleting, mechanical mixture). The optimal variant should be chosen according to waste type, its content of useful elements...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26968

Environmental threats posed in the environment by plastic production and plastic wastes continue to be a major problem today, closely connected with the increase of plastics consumption by the population. Moreover, little efforts are involved in some parts of the world associated to plastic waste collection, recycling and reuse. Considering all these prerequisites, the identification and discussion of risks generated by plastic production and waste in the environment are performed in this pap...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26990

Composting is one of the most used biowaste recycling method. The paper highlights the influence of some natural organic additives such as cattle and poultry manure on the quality of compost and especially on the content in microelements and heavy metals. The mature compost showed the following macro and microelements concentrations: total N 1.12-1.38%, P 0.56-0.90%, K 0.68-0.92%, Ca 1.18-1.70%. Mg 0.38-0.66%. The compost that included cattle manure showed the highest content in humic substa...
Autori: Irina Smical
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27032

This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

The management of urban solid waste is a growing priority both in large cities and in rural settings, and in developed and developing countries. Many factors can influence the type and amount of waste generated, including population density, level of industrialisation, quality of life of households, type of area (urban/rural) and local climate. In this paper, we introduce an index of solid waste recycling over a ten-year period and examine the influence of several such factors on this index. ...
Autori: María-José Del-Moral-Ávila
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27071

The present study investigates the effect of addition of calcium hypochlorite in the titanium dioxide (TiO2) mediated degradation of bio-recalcitrant wastewater from pharmaceutical industry. The degradation studies were carried out in photoreactor irradiated with ultraviolet (UV) light at 365 nm under slurry mode. The reduction in chemical oxygen demand (COD) was estimated as an index of degradation. The influence of process parameters viz., catalyst dose, pH, oxidant concentration and source...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27097

This research focuses an examination of municipal solid waste (MSW) generation and composition in Amasya, providing overview of the current state of MSW management, an analysis of existing problems in MSW collection, separation, recycling and disposal. Municipal solid waste comprises more than 95% of Amasya’s solid waste, while three other types of solid waste comprise less than 5% of it, namely industrial waste (3.5%), hospital waste (1.0%) and construction and demolition waste (0.5%)...
Autori: Semra Çoruh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27099

The roots of this study are generated by the problems of plastic waste accumulations: insufficiency of storage spaces, storage costs and outgoings of plastic waste recycling, recovery, decomposition or reprocessing. The paper develops and details a modular prototype, for multifunctional territorial use, offering non-polluting and aesthetic possibility of plastic waste storage. The progress in the related fighting pollution areas have been approached, such as waste management through ecologica...
Autori: Doina Mira Dascălu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27112

The aim of this study is to investigate an innovative way to utilize the char obtained from tyres pyrolysis, in order to realize lightweight materials for building. Pyrolysis residue, mixed with three types of waste glass, has been used as raw material to obtain lightweight materials, exploiting its capability to behave as foaming agent. The results demonstrate that the pyrolysis char is a good foaming agent for the mixtures 50/50 with glassy sand and packaging glass waste, thermal treated at...
Autori: Fernanda Andreola
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27119

This work focuses on treatment of lead polluted waste glass from urban collection (Pb≈5% wt) for its valorization as support in the immobilization of lipase, because soda-lime glasses are used in enzymatic catalysis. First of all, an extraction process of surface Pb was performed. The process is based on nitrilotriacetic acid (NTA) chelating agent. The operating conditions are: T=80°C, t=1h, pH 10, solid/liquid weight ratio=1/10, reagent concentration=0.1 M. Leaching tests at contr...
Autori: Luisa Barbieri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27122

Against a background of growing concern with environmental issues, resource consumption and waste production in the construction sector, this article presents the results of a study on the implementation of environmental management systems (EMS) certification in Portuguese construction companies. It reports on how construction companies perceive motives, difficulties, benefits and effectiveness of implementing EMS certification. A questionnaire served as the basis for data collection. It was sen...
Autori: Caroline Dominguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27174

Life Cycle Assessment (LCA) is a methodology that can be used to evaluate the environmental performance of municipal solid waste management systems (MSWMS). Despite of Waste Directive provisions, this methodology is insufficiently applied as a decision-support method able to identify the best option for the waste management in Romania. In this paper we applied LCA methodology to study of the municipal waste management system of Cluj County, supported by GaBi software. The aim of this study is to...
Autori: Gabriela-Emilia Popiţa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27225

Sustainability and integration are becoming keywords in many European Union policies, including ones that are directly or indirectly related to mineral resources and waste management. Moreover, life cycle thinking (LCT) is core to many of these policies. The European Commission has issued the Communications “A resource efficient Europe” and “Roadmap to a Resource Efficient Europe”, the stated goal of which is to reconsider the whole life cycle of resource use so as to mak...
Autori: Gian Andrea Blengini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27267

Construction industry uses a huge quantity of traditional and modern building materials which generally are produced to satisfy different demands, such as: resistant and safety requirements, friendly with the environment, architectural aspects etc. Researches must solve any requirements related to materials properties and offer a large diversity from which the proper solution must be considered. For improving the mechanical properties of polymer concrete, the use of fibers of different types is ...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27306

In this paper life cycle assessment was applied to analyze and evaluate, from an environmental point of view, current and alternatives to the current solid waste management system in Banjaluka region. The current system, which is disposal on landfill, has significant adverse environmental impacts caused by methane emissions from landfill. Therefore, four different scenarios were developed as alternatives to the current waste management system. Landfilling with energy recovery, separate collectio...
Autori: Draženko Bjelić
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27312

Considering the actual environmental issues, the waste management has become a major challenge in Europe and worldwide. Recycling the waste into sustainable products can be an alternative to landfill with positive effects on the costs and environmental pollution. In this respect, in the last years numerous studies and research emphasize the utilization of different type of waste to obtain materials for building applications. The aim of this paper is to assess the effect of using sewage sludge ge...
Autori: Petronela Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27315

The paper is addressing the issue of returns in products life cycle, focusing on a washing machine as an example of a long-life product with a complex life cycle and numerous options concerning its handling as a return. The objective of the paper is to compare different return product handling scenarios in terms of their economic and environmental aspects. The used materials and methods are the survey results of Polish manufacturing companies, an environmental life cycle assessment and simple co...
Autori: Tomasz Nitkiewicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27338

Drilling waste management for oil and gas industry involves collection, transportation, processing, recycling, disposal, and monitoring of waste materials in order to reduce their effects on health and environment. In the Exploration and Production industry, environmental concerns have made effective management of drilling waste at well sites a great priority. Effective waste management is thus a key element in a successful drilling project. The industry therefore relies on effective expertise a...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27375

End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

Water footprint is an indicator of freshwater use that looks not only at direct water use of a consumer or producer, but also at indirect water use; it can be regarded as a comprehensive indicator of freshwater resources appropriation, next to the traditional and restricted measure of water withdrawal. It could be counted in terms of the sum of direct and indirect water costs in all processes and input-output analysis to detailed water used in all plant. In this paper, the application of the...
Autori: Agata Matarazzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27410

This paper describes shortly some outcomes of a project aiming to apply a scientific research directly to industry, passing through a system that wants to promote an economic "Pact" in relation to the new construction and renovation projects of energy, according to its fundamental guidelines of the moment: renewable energy and energy efficiency. The key point is to produce energy from recycled materials that become functional to dwellings (from the garden shed to furnishings, etc.),...
Autori: Marco Santarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27421

This study was aimed at eliciting the perception of practitioners on sustainable supply chain management in small and medium enterprises (SMEs). A total of 15 companies from the SMEs in Malaysia were selected. 5 of these companies serve as suppliers to larger firms within and outside Malaysia, another 5 as manufacturers, and the rest as reverse logistics companies (collectors and recycling plant operating companies). All the companies were selected based on their involvement in sustainable su...
Autori: Ezutah Udoncy Olugu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27440

Considering that glass containers are generally highly transparent they are good candidates for spectroscopic measurements and application of a transmittance for glass separation. The selection of glass container samples directly from municipal waste disposal bins, characterized by different colors, thicknesses, and shapes was done. Transmittance spectra of clear, green, amber and black clean glass containers were recorded, along with spectra of the usual bottled liquids. Positions of the absorp...
Autori: Dragana D. Strbac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27452

Municipal Solid Waste (MSW) disposal is currently one of the major environmental issues in big cities. Several tools and techniques have been developed for Environmental Impact Assessment (EIA) of MSW disposal options, including scoping, checklists, matrices, qualitative and quantitative models and decision-support systems. Rapid Impact Assessment Matrix (RIAM) is a partially new method which is particularly advantageous over others as it provides a transparent and permanent record of analysi...
Autori: Zohreh Aliakbari-Beidokhti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27465

Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processi...
Autori: Maria Râpă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27493

The optimization of household waste collection in China is facing more complex and structural problems related to waste reduction and recycling than that of disposal. A rigorous decision-making model of matter-element analysis (MEA) combined with the analytic hierarchy process (AHP) is developed to validate the feasibility and practicality of five alternatives to separated waste collection. This model is based on a survey of residents’ cognition and inclination toward the optimization o...
Autori: Haibin Chen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27520

This paper examines employees’ work-related attitudes to recycling and waste management systems whilst retaining a link with personal domestic behavior. A questionnaire of 38 Likert-type items measured employee attitudes to environmental, waste management and recycling, environmental and sustainability concerns, perceived costs and benefits to the company. The hypotheses included demographic differences in attitudes, that attitudes and behavior are related and that behaviors transfer from...
Autori: Oliver Heidrich
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27531

The tenacious technological development at latter decades has conditioned the growth of electrical and electronic equipment (EEE) amount and generation of their waste. That is a global heterogeneous problem including different stakeholders and various aspects: environmental, economic, social and technological. The regional electrical and electronic waste (WEEE) management systems (MS) are developed in order to solve this problem. The implementation of WEEE recycling and collection targets is not...
Autori: Inga Gurauskienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27537

Recycling of battery components for natural resources sustainability and consumer products has become an important endeavor that demands continuity through effective processes. In compliance with the need for waste management, LiMn1/3Ni1/3Co1/3O2 in the positive electrode of spent lithium-ion batteries has been recovered using specially designed device, consisting of two compartments separated with a plastic sieve of pore size 0.2mm. The upper compartment equipped with a mechanical stirrer conta...
Autori: Oluwatosin Emmanuel Bankolehttp://www.ecozone.ro/reviste.php?RID=27581

Social upgradation results more postconsumer glass and plastic waste and continuously demands newer techniques for their management. This research proposes a new waste-to-waste management strategy by using waste glass for polyolefin degradation. For this purpose, waste glass is activated by mechanochemical treatment and resultant material is used for the thermal pyrolysis of polyolefin. Certain improvement in the product quality is achieved by selectivity towards more alkane fraction. ...
Autori: Pooja Singh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27586

This paper describes an eco-efficiency decision support model for of end-of-life solid waste recycling. A holistic approach in balancing environmental pollution concern and waste recycling is required. A system dynamic model is based on mathematical model of the supply chain, and decision-making analysis is supported with the online spreadsheets. A criterion function-based modelling is used as a core model for simulation that uses net present value-based metrics of the supply chain activities. T...
Autori: Stanislav Avsec
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27591

The paper presents a case study of a significant intervention conducted on a major Italian airport for improving the structural and functional properties of the runway safety STRIP in order to fulfill specific national and international standards. The STRIP had to accomplish strict requirements in terms of the maximum longitudinal and transversal terrain slope and minimum values of bearing capacity; in particular, soil bearing capacity was identified as the main lack and thus the most urgent ac...
Autori: Maurizio Crispino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27603

β-glucosidases are very important in the improvement of cellulose degradation rates by diminishing the inhibition of end products. Although, cellulase cost has reduced significantly in last decade but still the high costs of biomass saccharification is one of the main challenges for the commercialization of ethanol from LC biomass. In this work, β-glucosidase immobilization in calcium alginate was optimized using response surface methodology. 89% immobilization efficiency was achieved ...
Autori: Ruchi Agrawal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27614

FLUCTUATION OF RIVER NETWORK WATER ENVIRONMENTAL CARRYING CAPACITY IN A COMPLICATED RIVER-LAKE SYSTEM    • MINERALOGY AND GEOCHEMICAL DISTRIBUTION OF HEAVY METALS FOR THE FAGUL CETĂȚII TAILINGS, ROMANIA    • ACCUMULATION AND AVAILABILITY OF TRACE ELEMENTS FROM SOIL INTO ORIENTAL TOBACCO GROWN IN MACEDONIA    • OLFACTORY EFFECT ON LANDSCAPE PREFERENCE    • EFFECT OF MOLASSES ADDITION AS BIODEGRADABLE MATERIAL ON PHENOL REMO...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27628

Thin-film transistor liquid-crystal display (TFT-LCD) waste glass can be used as a raw material for producing geopolymers, because it contains large amounts of silicon and aluminum in its amorphous structure. The setting time and compressive strength were evaluated to determine the quality of the geopolymer product with various amounts of nano-SiO2 (0%–3%) and TFT-LCD waste glass replacement (0% - 40%). The microstructures of the samples were characterized using mercury intrusion porosimet...
Autori: Kang Gao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27634

Pyrometallurgical recycling of lead from spent batteries entails secondary waste fractions generated in the blast furnace as iron stone and lead slags. For further purification of both fractions, hydrometallurgic processing is proposed. This paper focuses on purification of iron stone, in view of recovering metals (mainly lead) and of producing decontaminated iron stone fit for further recycling. The results demonstrate that iron stone is mainly composed of iron and lead; copper, zinc and antimo...
Autori: Bart Van der Bruggen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27642

The paper describes the main results from a study of cement bound mixtures for road foundations with the aggregate matrix consisting of industrial wastes, i.e. foundry sands (FS), electric arc furnace (EAF) steel slags and bottom ash from municipal solid waste incineration (MSWI), combined in five different proportions. The laboratory investigation involved a preliminary analysis of the chemical, leaching, physical and mechanical properties of the industrial wastes, followed by a mechanical char...
Autori: Marco Pasetoo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27645

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

Five indigenous soil microbes were isolated from chickpea rhizosphere soils of different location of Jaunpur, Mirzapur, Varanasi and Azamgarh district of eastern Uttar Pradesh. The microbial strains were identified as Pseudomonas aeruginosa BHUPSB01, Pseudomonas putida BHUPSB04, Bacillus megaterium BHUPSB14, Paenibacillus polymyxa BHUPSB16 and Mesorhizobium sp. BHURC05 by biochemical and molecular characterization. The isolated strains were tested for their plant growth promoting properties....
Autori: Jay Prakash Verma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27654

The Chinese government has established ambitious low-carbon targets and various low-carbon development strategies in recent years, showing a strong will for low-carbon governance. However, these strategies can only take effect by transferring into strong actions in practice. This paper, therefore, reviewed the effectiveness of these policies towards low-carbon economy at the governmental, organizational and personal levels. Literature, interview and internet surveys are adopted in the investi...
Autori: Wang Nannan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27664

The main objective of this research was to evaluate the environmental impact generated by municipal solid waste during its collection, transportation, treatment and processing in the south-west region of the department of Norte de Santander, Colombia, by means of Life Cycle Assessment (LCA). Three strategies for waste management were considered: the current baseline situation, wherein 100% solid waste was taken to the landfill; plus, an optimistic and a pessimistic scenario in which solid was...
Autori: Oscar Orlando Ortiz-Rodriguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27665

The article presents a study on indirect environment-related effects of electric car vehicles use. Although electric vehicles are considered zero emission vehicles, their use may be linked to indirect pollution of environment caused by energy sources used for electricity production and also other sources of pollution such as poor recycling procedures. A computer simulation was performed to determine the energy consumption of electric vehicles available on the Romanian car market. The values obta...
Autori: Bogdan Ovidiu Varga
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27686

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

Higher Education Institutions in Palestine are considered to have one of the main contributors to solid waste generation according to local authorities’ annual reporting. Besides being major players in the education field, they are presented with the opportunity of being also key players in the promotion of waste minimization and awareness raising towards solid waste management strategies. In the present paper the results of an extended field research in the Palestinian Higher Education...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27769

Influence of soil pH on the mechanical characteristics of glass reinforced plastic (GRP) pipes type was often investigated in different situations encountered in the field. GRP degradation is directly proportional to the exposure to soil with non-neutral reaction. The theoretical and experimental results lead during time to design standards, which allow the application of GRP pipes in water and soil, so as minimum interferences with the materials used in the manufacture of pipes would appear. Sa...
Autori: Ana Diana Ancas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27768

Changing wastes into raw materials is one of the most favored options for waste management, as it diverts wastes from landfill and saves resources. Fibers, either vegetable (cellulosic) or synthetic, may be added to cement pastes in order improve the properties of concrete or mortar by reinforcement. At the same time, if the source of fibers is wastes, then such processes make ways for recycling. In the work described here we studied the compatibility of residues from the nonwoven textile indust...
Autori: Hugo Monteiro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27766

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

This paper focus on how prefabricated building systems can allow the implementation of deconstruction strategies. Prefabricated mechanically fixed components, in comparison with conventional concrete and brick in situ construction, can be more easily separated during demolition, allowing its reuse, and even if this is not possible, at least allowing the recycling or the energetic recovery. It is very important that construction practitioners understand the benefits of the prefabrication. As a wa...
Autori: Joăo Pedro Couto
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27739

Until now, humanity has strived to makes efforts for warranting the economic development on a sustainable way for well-being improvement, simultaneously with resource preservation and environmental protection. The industrial production processes, which generate added value and ensure people welfare are in connection with the environment regarding resource consumption and waste generation. In order to work on a sustainable basis, industry should attain a balance between economy, ecology and comm...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27759

As it is widely known, according with European directives, the correct approach for waste management is based on a strict hierarchy of prevention, reuse and recycling, energy recovery and final disposal. In that way, all the countries have to strongly move in urban waste reduction and recycling promotion. The principles of the Circular Economy have become part of the European and other extra Europe Countries regulations. The European pack on Circular Economy suggests ambitious objectives by 203...
Autori: Alfonso Andretta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27785

In the light of water shortages, frequently affecting many regions worldwide, domestic rainwater harvesting, and greywater reuse systems represent an alternative source of water. This study fits this framework providing a hydraulic/hydrological model developed by means of the EPA’s Storm Water Management Model. The model has been applied to a case study, which consists of an apartment building located in the city of Bologna and equipped with a hybrid rainwater-greywater recycling system. C...
Autori: Sara Simona Cipolla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27789

According to recent estimations, the total yearly amount of end-of-life tyres (ELTs) arising in Europe exceeds 3 million tons; more than 95% are managed through mechanical and thermal treatments because ELTs represent a useful resource both of materials and energy. For this purpose, the goal of the present work is the assessment of the environmental impacts of a novel pyrolysis process and the comparison with alternative ELTs valorisation or disposal scenarios. Life Cycle Analysis (LCA) methodol...
Autori: Esmeralda Neri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27798

The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

Ti/TiO2 films were prepared by DC reactive magnetron sputtering followed by annealing in air at 400 ºC for 4 h. Structural tests have been performed to characterize the films, showing that the prepared films present 70% of anatase phase. When these results are compared with those from TiO2 films grown on glass substrates with similar deposition parameters, it can be seen that Ti substrates favour the formation of rutile phase, which is not observed on the films supported on glass, indicatin...
Autori: Susana Sério
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27868

This paper seeks to evaluate the quantities of e-waste in Botswana from 2000-2019, with a view towards formulating an effective and sound e-waste management system. Due to a lack of complete historical records on e-waste quantity and quality, this was achieved by the Grey Model GM(1,1) forecasting method. Our estimations indicate that an average weight of about 293.18 tons of e-waste will be generated in 2019 in the country. Considering an economic lifespan of between 3 and 10 years, more e-wast...
Autori: Daniel Mmereki
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27838

In this study we investigated the possibilities of using recyclable fine and coarse grain waste obtained by grinding Polyethylene Terephthalate (PET) containers, as light filling materials for different applications (clay dams, highway embankments, and backfills behind retaining structures. Various geotechnical tests were performed on clayey soil and soil-PET mixtures using recycled fine and coarse granules of Polyethylene Terephthalate bottles. The results indicated that the use of the recyc...
Autori: Osman Gunaydin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27920

Among all the prominent contributors of municipal solid waste (MSW), schools have been chosen for the study since the rate of solid waste generation and its respective composition has not been reported or rather has been underestimated in the schools of Puducherry region. Hence, the present paper is an attempt to fill up this gap in our knowledge. The existing waste management system in selected schools was unsystematic and relatively scarce to meet the waste management objectives in precise ...
Autori: Rajamanikam Ramamoorthy
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27921

Livestock farming in rural areas in Jilin Province is producing a huge amount of organic pollutants like livestock and poultry manure, of which, a large portion is directly dumped into the Yitng River, bringing serious harm to the environment. Taking Soonlng Village as an example, this paper investigates the environmental pollution caused by the livestock husbandry in this village and builds a biogas heat storage greenhouse ecosystem, which, by using solar energy to heat the biogas digester, ...
Autori: Songying Zhao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27943

The influence of Spathiphyllum “Sweet Silvio” flowers on indoor air quality (IAQ) and energy savings were studied experimentally in a bedroom, part of a 65 m2 three-room apartment, in Brașov, Romania. We used four 14 cm pots of Spathiphyllum “Sweet Silvio” with a total leaf surface of 134.29 cm2. The residential space has a low number of air exchange rates because exterior walls are insulated with 5 cm polystyrene, and windows have high-energy efficiency glass in ...
Autori: Gabriel Năstase
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27991

In this paper, several image analysis techniques have been applied aiming to obtain useful information regarding the processing of municipal solid waste polymers. An automated color extraction method has been applied in order to quantize the color distribution in the polymer wastes aiming their resource and time-efficient separation according to their color. Also, by processing different density fractions from the polymer waste the color of the final material has been predicted, as well as th...
Autori: Silvia Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27994

This study aims to define a municipal Solid Waste Management (SWM) strategy using Multi-objective Optimization Problem (MOP) and ELECTRE method. Four waste treatment technologies were considered: recycling, composting, incineration and landfilling. Firstly, a Multi-objective Linear Programing (MOLP) model was developed. The solutions obtained from this model were ranked using the ELECTRE method. It was considered as case study a hypothetical city of 1,000,000 of inhabitants, presenting the a...
Autori: Rafaella de Souza Henriques
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27998

This study presents the influence of the storage recipients’ material and of the use and the type of stirring on the drinking water quality. The kinetics of drinkable water quality alteration under stationary conditions and under magnetic and sonical stirring have been monitored for a two weeks period. The microbiological parameters (total number of germs developed at 37°C and 22°C, lactose-positive and lactose-negative bacteria, coliform bacteria and Echerichia coli), as well a...
Autori: Laura Damian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27999

With the rapid development of electric vehicles (EV), more and more EV batteries will intensively face the retirement. If they are treated improperly, EV batteries might pose a serious threat to human health and environment. Therefore, recycling spent EV battery is full of significance. However, the recycling system and specific policies have not be well established in China. This paper aims to evaluate several recycling subsidy policies being considered and tested in China for their influenc...
Autori: Xin Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28002

Sustainability and renewability in constructional materials and also utilization of such materials for various engineering purpose is the need of the hour. Green retrofitting with the aid of green fibre reinforced polymer (FRP) materials, made up of natural bio fibres like sisal would contribute to sustainable development. Non fossil-fuel carbon precursor organic fibres, i.e. sisal FRP composites were used for retrofitting of reinforced concrete (RC) beams, designed to undergo shear failure. ...
Autori: Tara Sen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28025

Environmental impact assessment (EIA) for waste disposal options to examine their impacts is of great importance. Rapid impact assessment matrix (RIAM) was used in this research to evaluate impacts of the four different MSW disposal scenarios in Abyaneh village which is one of the oldest villages in Iran, attracting numerous domestic and international tourists year-round. These scenarios, respectively, were open dumping (S1), sanitary landfilling (S2), composting, followed by sanitary landfil...
Autori: Ali Daryabeigi Zand
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28057

This paper presents an interdisciplinary methodology for handling the exposure of workers to lead and its compounds in a systematic way by connecting different disciplines, and thus enabling the comprehensive supervision of the workplace exposure. The exposure of workers to lead and its compounds was studied in the Republic of Slovenia. The research comprised 1079 employers being exposed to the lead concentrations between 0.01 and 0.9 mg/m3, which exceeded the limit value by 9 times. Workers ...
Autori: Lidija Korat
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28032

Inorganic thermal insulators are commonly used to improve energy efficiency. However, environmental and health aspects of their production until the end of life have been increasingly concerned. Agricultural wastes including rice straw, rice husk and corn cobs are abundant in Thailand and converted into value-added products such as thermal insulation materials offers a viable recycling opportunity as the ecological burden of a product has now become a widely-discussed issue. In this paper, gl...
Autori: Phairat Usubharatana
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28033

The environmental and economic impacts posed by waste electrical and electronic equipment (WEEE) make an effective collection and recycling scheme necessary for developing countries. Currently, developing countries in the Asia-Pacific regions are highly variable in terms of their present state of WEEE management, due to different economic conditions and levels of management. In this paper, we surveyed existing WEEE collection and recycling system in three Asia-Pacific developing countries &nd...
Autori: Yuan Chen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28034

Substantial quantities of toner cartridges are produced and used in photocopiers and printers every year. Spent toner cartridges are classified as hazardous waste because they contain toner powder with specific chemical composition, making a recovery of waste toner cartridges a very important issue from the aspect of waste management and environmental protection. Spent toner cartridges are mechanically processed to exploit valuable materials such as metals, plastics and magnets and to separate t...
Autori: Ivana Melnjak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28053

The embedment of circular economy principles in cities is an opportunity to reduce the urban waste production and resource consumption towards closed-loop systems. In particular, the adoption of circular economy strategies as regeneration, optimization, sharing and loops can overcome waste and inefficiencies of linear economy. This paper presents some circular economy practices bringing an integration of circular strategies at urban scale. This work was funded by the Research into Electrical Sys...
Autori: Francesca Cappellaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28076

The activities connected with the construction sector are responsible for several environmental impacts, both in the construction sector, and in the many manufacturing sectors involved in the supply chain of materials and products (mining sector, manufacturing sector, waste treatment etc.). The building products have a marked cross-sectorial connotation, according to the ANCE 2016 report, 31 economic sectors out of 36 are suppliers in the construction sector. One of the possibilities to reduce t...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28090

Over the last few years, the use of nanomaterials in the construction industry has grown prominently. Nanomaterials can considerably modify the properties of construction materials and even improve their performance. Despite their merits, considerable research has reported that nanomaterials pose a potential risk to human health. For this reason, it is important to fully comprehend the effects of nanomaterials on human health and the environment throughout all phases of their life cycle, includ...
Autori: Saeed Kamali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28091

Cost effective management of construction and demolition waste (C&DW) has become a serious issue with increased construction activity and modern urban lifestyle which is damaging environment, eating up resources and causing rapid land use changes. These factors have influenced the construction industry significantly and therefore gained the practitioners’ attention in recent past. New strategies of C&DW reduction management are being devised and reported; this research aims at prov...
Autori: Ahsen Maqsoom
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28096

This paper attempts to realize the green logistics of solid waste at ports, enabling the harmless treatment, reduction and recycling of such waste through the entire life cycle. For this purpose, the life cycle assessment and the analytic hierarchy process (AHP) were applied to evaluate the green logistics of solid waste at ports. Firstly, the solid waste logistics system was examined from the perspective of logistics system. Drawing on life cycle evaluation, the author analyzed how the solid wa...
Autori: Xuexin Bao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28107

Wastewater generated from industrial activities has delivered elevated heavy metal concentrations into fresh and salted aqueous systems. Herein, the migrated trace metals were studied from their initial location through a coastal aquifer up to the seawater. The experiments were carried out at lab scale using a sandbox with glass beads and two attached chambers containing natural groundwater and seawater. The study focused on the transport behaviour of heavy metals such as copper, zinc and lead i...
Autori: Abdelkader Tawfeek Ahmed
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28111

The maintenance of flexible roads or roads at end of life service generates high quantities of reclaimed asphalt pavement every year. The reuse of these materials, considered for a long time as waste, allows a substantial saving in transport, energy, and maintains dwindling natural resources. Recycling of asphalt also helps to reduce inert waste storage volumes, and conserve valuable landfill space. The applicability of recycled asphalt was tested in laboratory, and asphalt mixtures containing 2...
Autori: Mehena Oualit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28117

The purpose of this paper was to sum up the most appropriate pretreatment methods for destabilizing the oil waste emulsions coming from metal surface processing operations. A three steps oil waste management pretreatment methodology was proposed considering the application of the waste hierarchy and end-of waste criteria in the spirit of circular economic concept. Our main objective was to valorize the high energy content of oil waste flows using low cost pretreatment methods. The obtained phase...
Autori: Lidia Kim
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28122

The aim of the study was to determine the relation between the composition of university recyclable material collected (plastic, paper, metal and glass), education-related factors such as the academic calendar and work stoppages, and regional factors such as climate, regional economy and composition of the urban waste collected over an 8-year period. The study was conducted based on the composition of recyclable dry solid wastes at the Federal University of Rio de Janeiro, quantified after th...
Autori: Victor Becker Tavares
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28127

Building industry is a very large domain in the global economy and it has a lot of consequences over the environment through many and different aspects. These consequences are various, from the more and more extended area of construction up to gas emissions released during materials manufacture and transportation, construction process, exploitation of buildings and, finally, their deconstruction. The concrete, the most used material in construction industry all over the world, must become green...
Autori: Catalina Mihaela Gradinaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28138

There are considerable environmental and health and safety concerns regarding liquid crystal display (LCD) waste glass because of the waste electrical and electronic equipment (e-waste) that is deposited in landfills. In current study, the effect of variation in LCD waste glass on the deconvoluted fractions of silicon centers of metakaolin geopolymers has been comprehensively investigated to discover the underlying mechanisms governing the performance. Solid/liquid ratio affects the kinetics of ...
Autori: Kang-Wei Lo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28146

The Cellets product represents a cellulose material, which combines different properties such as the perfect sphericity, fine particle size distribution, low friability and solubility, and inertness. The experiments were carried out with Cellets 200 granulated celluloses used as a filling material for a laboratory glass column, using diluted dye solution (9-10 mg of dye /L of solution) at adequate initial pH (4.7). The effect of flow rate was investigated, and the modeling of experimental data f...
Autori: Iulia Nica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28155

The valorization of a metallurgical waste (i.e., an iron-rich slag) as raw material for the fabrication of high hardness glass-ceramics using differential thermal analysis, X-ray diffraction, X-ray fluorescence and scanning electron microscopy was investigated. The melting of the slag was aided by the addition of waste glass cullet (WGC) and the vitrification field of this system was investigated. The non-isothermal crystallization kinetics of the parent glass with the highest slag content was s...
Autori: Erika Iveth Cedillo-GonzĂĄlez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28168

Interest in water recycling has provided opportunities to evaluate the potential impact of pharmaceuticals and personal care products (PPCPs) on plants where recycled wastewater is used for watering and irrigation. Most researches have focused on the impact of pharmaceuticals on seed germination and plant physiology or the uptake of pharmaceuticals into plants. We sought to find out whether nutrient and metal uptake into wheat plants were affected by the presence of PPCPs (acetaminophen, caffein...
Autori: Etem Osma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28193

This study is a physical characterization of household waste in the town of Annaba (Algeria North East). Based on an adequate sampling protocol that takes into account the constraints of Algerian cities; Annaba city was taken as a case study for the rapprochement of the situation in Algeria. A quantity of 90 to 120 kg was sorted for each type of habitat in the city during four seasons of the year 2010 to 2011 according to 11 components of household wastes. Variations in the percentages of som...
Autori: Hamza Cheniti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28197

Nine samples of recycled acrylonitrile butadiene styrene (ABS) with organic montmorillonite and fire retardants adding were combined to prepare ABS copolymer nanocomposites. A very good dispersion of clay and fire retardant was noticed in the recycled ABS (reABS) matrix. The effect of montmorillonite and fire retardants on the mechanical and thermal properties of the reABS nanocomposites was further investigated. Experimental results showed that the addition of organic montmorillonite increased ...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28203

LED waste quartz sand (LEDWS), which is a prominent by product of the LED manufacturing process, may contaminate the environment because it comprises specific heavy metals (e.g., As and Cu), which are hazardous ingredients to the environment when disposed of improperly. Therefore, this study investigated the use of light-emitting diode (LED) waste quartz sand to partially replace Portland Type I cement (OPC) to evaluate the feasibility of reusing it as a pozzolanic material. The SiO2, Na2O, and ...
Autori: Kae-Long Lin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28207

The paper analyses the possibilities of recycling tannery sludge (TS) in clay brick manufacture. The physico-mechanical properties and microstructure of clay brick and cement mortars vary depending on TS content in the mix. 2.5 %–15.0  TS (by weight) was added to clay bricks fired at 1000 C temperature and maintained at maximum heat for 1 hour. The tests revealed that 2.5  TS addition had a positive effect on physical and mechanical properties of clay brick: reduce drying and mfi...
Autori: Olga Kizinievič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28209

Printed circuit boards are the most important component of any electrical and electronic device. The average metal content in waste printed circuit boards is ~30-35% whereas the rest of the material is a non-metal fraction (NMF). Metals in the waste printed circuit boards are recycled for their value whereas the NMF is mostly sent to landfills or incinerators for disposal. The circuit board laminates contain flame retardant chemicals that pose potential hazards to the environment and to public h...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28216

This study aimed to evaluate recycling networks for poly(ethylene terephthalate) (PET) packaging and propose a network structure for sharing recycling routes between different production units, using the Rio de Janeiro metropolitan region as a case study. A descriptive design was used and field research conducted to gather data on the recycling process. Participants were production units, classified as distributors, distribution recyclers, intermediate recyclers, and molding recyclers. A georefe...
Autori: Roberta Dalvo Pereira da Conceição
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28262

Research on the efficiency of agricultural waste recycling by farmers is helpful to help us understand the status of agricultural waste recycling based on micro perspective From this perspective, this paper uses a three-stage Data Envelopment Analysis model to measure the agricultural waste recycling efficiency of peasant households. Through research, the concludes that the three-stage Data Envelopment Analysis model seems more scientific and rational to measure the performance of farmers&rsquo...
Autori: Xiaoyuan Geng
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28271

Pay as You Throw (PAYT) is a usage-pricing model for the disposal of Municipal Solid Waste. The implementation of the PAYT approach requires three main elements: a) measurement of the generated amount of waste; b) a means to identify the waste generator; c) the unit pricing for individual charging based on the amount of waste collected and services provided. The PAYT system splits the overall municipal solid waste tax into one fixed part, no-service dependent and a variable part related to the a...
Autori: Gaetano Drosi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28285

The aim of this study is to design and characterize a new controlled release fertilizers category by using valorization of residues from agri-food, industrial and post consumers activities normally allocated into landfill disposal. The underlying strategy in materials research fully agreed with the circular economy perspective and the more recent European legislation about critical raw materials recovering. This study covers the development of lightweight aggregates, based on a local red clay (k...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28286

Every year 93 billion tonnes of raw materials are consumed, but only 9% of them are reused: a potential of about 3 trillion dollars worldwide, 88 billion in Italy, according to Growth Within: A Circular Economy Vision for a Competitive Europe by Ellen MacArthur Foundation with McKinsey. A vehicle is potentially recoverable, in its components for more than 95%, an industrialised process of treatment of end-life vehicles (ELVs). Optimising raw material recovery is currently possible and advantag...
Autori: Luca Pomili
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28295

Brominated flame retardants (BFRs) are used in different types of products such as plastic, textiles and electronic circuits with the aim to increase fire resistance and to avoid or to delay the propagation of accidental combustion. However, high concentrations of bromine in waste from electrical and electronic equipment (WEEE) hinder the possibility of their use as secondary raw materials. Furthermore, the possibility that BFRs can be released during mechanical recycling processes, imposes the...
Autori: Giuseppe Bonifazi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28296

Plastic and circular economy are key words that characterize our present and seek to address the future of the global social economic system. Plastic, on the one hand, is the emblem of modern times, a low cost material with unparalleled functional properties. Circular economy, on the other hand defines an alternative model to traditional economy that focuses on sustainability. In this work, the author presents a case study relating to a virtuous example of circular economy applied to the industr...
Autori: Leonardo Mita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28301

The steady increase in separate waste collection has highlighted the urgent need to adequately deal not only with urban waste (differentiated and undifferentiated) but also with special waste produced by separate waste collection and recycling processes. Source collected municipal solid waste produces different waste streams. One of this is the organic fraction of municipal solid waste (OFMSW). This fraction is central for circular economy, since it can be further transformed in order to recove...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28302

This study analysed the recycling of debris derived from the partial and selective demolition of concrete structures of Sant’Elia Stadium in Cagliari (Sardinia, Italy). This recycling was carried out to obtain coarse recycled aggregates for the production of recycled concrete. The experimental investigations demonstrated the possibility of using these recycled concrete aggregates in structural concrete and in precast concrete element, with unchanged production processes and suitable mechan...
Autori: Luisa Pani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28307

Healthcare wastes are produced from all medical and therapeutic activities in hospitals and healthcare centres. Around 15-20% of these wastes are classified as infectious wastes that could be hazardous. Therefore, an effective approach is required for handling costs and environmental issues. In this paper, a bi-objective Mixed-Integer Linear Programming (MILP) model is presented for logistics of infectious and non-infectious wastes. The proposed bi-objective model aims to minimize network costs ...
Autori: Mohammad Nikzamir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28314