ecozone editura ecozone iasi

» Autentificare

E-mail:
Parola:
   
  Cont nou
Va rugam sa va autentificati pentru a putea comanda carti

» Cautare

  » Ultimele cautari

Rezultatele pentru material

Rezultate gasite: 539

Hydrogen and sustainable energy. Research for hydrogen production
Environmental Engineering and Management JournalVol. 6Nr. 1
Abstract Hydrogen could be considered a synthetic secondary power carrier fuel in the years to come, subsequent to the fossil fuels economy. Thus the concept 'hydrogen economy' shall be defined, and it will also have a great influence in the future years.The field of power generation (producing electric power), transports, (electric cars), chemistry (hydrogen is a major raw material) are potential users of hydrogen.The experts support, by means of a series of economical and strategic analysis ma...
Autori: Corina Rădulescu, Elisabeta Păsculete, Florentina Condrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25111

Solid waste management systems assessment: the municipality's point-of-view
Environmental Engineering and Management JournalVol. 6Nr. 1
AbstractThe objective of the paper is to present sustainability indicators for municipal solid waste management (MSWM). Sustainability implies environmental, economic and social acceptance. The complexity of the system-in-focus requires the employment of a systems (or cybernetic) approach: Acceptance implies clear objectives, from a specific point of view (here, the viewpoint of the municipal administration is taken), over a time horizon covering at least two generations, a life-cycle considerat...
Autori: Demetrios Panagiotakopoulos, Konstantinia Tsilemou
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25112

Fugitive emissions estimation from petroleum storage tanks
Environmental Engineering and Management JournalVol. 6Nr. 2
Liquid petroleum fuel products such as High Speed Diesel (HSD), Superior Kerosene Oil (SKO), Motor Sprit (MS) are stored in floating roof tanks under atmospheric conditions. The Storage tanks are provided with fittings like rimseals, gauge float wells,sample ports, deck drains and access hatches and becomes the sources of hydrocarbon vapour emissions released to the atmosphere. The net throughput and the annual turnovers of the fuel products and annual average meteorological conditions were cons...
Autori: Bandari Chakradhar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25117

Removal of zinc (II) from aqueous solutions by romanian sphagnum peat moss
Environmental Engineering and Management JournalVol. 6Nr. 3
In recent years the removal of toxic substances especially heavy metals from water and wastewater by using of non-conventional low-cost sorbent (industrial wastes and some natural material including microorganisms, plant-derived materials, agricultural products and by-products, mineral oxides, clays) has received much attention. In this paper efficiency of Zn (II) removal from aqueous solutions by sorption onto Romanian sphagnum peat moss was studied in batch experiments involving process parame...
Autori: Angelica Kicsi, , Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25126

Removal of persistent organic pollutants from textile wastewater by membrane processes
Environmental Engineering and Management JournalVol. 6Nr. 3
AbstractThe textile industry is a large water consumer. Stringent regulations of wastewater characteristics require the use of membrane processes for the removal of persistent organic pollutants (POPs) from textile wastewater prior to discharge or recycling of these effluents.This paper presents an overview of research related to the removal of persistent organic pollutants from textile industry by membrane processes, discussing also the correlations with actual pre-treatment and removal rates. ...
Autori: , Corina - Petronela Musteret
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25127

Research on the impact induced in the environment by milk processing Industry case study: S.C. Raraul ltd. Campulung, Suceava county
Environmental Engineering and Management JournalVol. 6Nr. 3
The paper presents some investigations and assessments on the impact induced in the environment by a milk processing unit which makes a variety of products. The balance sheets for raw materials were elaborated for all the activities carried on the location; based on these, the synthetic indexes of the impact on the environment were drawn, as well as the specific factors: the extent of the usage of raw material, materials and specific effluents....
Autori: Adriana Ilisoi, , Letitia Cezar, Mihai Nicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25131

Electrochemical investigations on the behaviour of Ni-Cr based dental materials in the sodium chloride - oxalic acid - lactic acid system
Environmental Engineering and Management JournalVol. 6Nr. 3
AbstractThe corrosion behaviour of three commercial nickel-chromium based dental materials was investigated by electrochemical methods in a corroding mixture of sodium chloride, oxalic acid and lactic acid. In order to establish electrochemical parameters of the corrosion process, linear and cyclic polarization curves were plotted. The samples performances in the corroding system were investigated by weight loss, pH and electrical conductivity measurements. The quantitative analysis related with...
Autori: , Daniel Mareci, Daniel Sutiman, Mircea Teodor Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25132

Layered double hydroxides as potential solid for obtaining more environmentally friendly pesticides
Environmental Engineering and Management JournalVol. 6Nr. 4
AbstractThe paper describes the synthesis and characterization of layered double hydroxides (LDH) intercalated with 4,6-dinitro-o-cresol(DNOC) and 2,6-dichlorobenzonitrile (2,6DBN) by anionic exchange method. The incorporation of the organic pesticides in the structure of layered double hydroxides can offer premises to increase the pesticide active life by reducing its volatilization, controlling the release of the pesticide from the layered structure and decreasing the pesticide adsorption in s...
Autori: Gabriela Lisa, Marcel Ionel Popa, Mihaela Frunza
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25144

Electrical properties of SnO2-Pt/Al2O3 in reduction atmosphere
Environmental Engineering and Management JournalVol. 6Nr. 5
AbstractCatalysts having mobile electrons in bulk such as metals and semiconductors are good solid materials for red/ox type of reaction (oxidation) and can be effectively used in gas sensing devices as well. The aims of this work were: (i) to investigate the surface behavior of Pt(0.28%)/Al2O3 and SnO2(2.94%)-Pt(0.28%)/Al2O3 samples in inert atmosphere (He) and in reducing atmosphere containing helium-cyclopropane gas mixture under ambient condition (i.e., room temperature, atmospheric pressure...
Autori: , Cornel Munteanu, Jozsef Kovacs, Mariana Scurtu, Monica Caldararu, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25146

Solid waste in romania: management, treatment and pollution prevention practices
Environmental Engineering and Management JournalVol. 6Nr. 5
AbstractThe paper analyzes some aspects of waste management in Romania and, in particular, in Iasi County, in view of the European perspective. Urban and rural waste management is considered and collection, transport, processing, recycling or disposal of waste materials is discussed relative to the National Waste Management Strategy and the National Plan for Waste Management, as well as European and national legislative framework.It was showed that land disposal will continue to be a disposal op...
Autori: Ana-Maria Schiopu, Ion Apostol, Maria Gavrilescu, Monica Hodoreanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25203

Environmental Engineering and Management Journal, Vol. 3 Nr. 3 (I)
Environmental Engineering and Management JournalVol. 3Nr. 3
Contain all the articles from this issueICEEM /02 PLENARY SESSION:"Environmental Engineering and Management in the Context of Sustainable Development"Green technology foresight of high technology: Hype of potentials - The challenges from nanotechnology, Biotechnology and ICTMichael S?¸gaard J?¸rgensenIntrinsic properties of noble metals in catalytic selective reduction of NO by propene in lean burn conditionsAnne Giroir-Fendler, Helleh Saadallah, Adela HaletaICEEM/02 - ENVIRONMENTAL ENGINEERING ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25178

Environmental Engineering and Management Journal, Vol. 4 Nr.3
Environmental Engineering and Management JournalVol. 4Nr. 3
Contain all the articles from this issueLignin in crop cultivations and bioremediationAlfred Abaecherli, Valentin I. PopaMaterials for intermediate-temperature solid oxide fuel cells and for proton exchange membrane fuel cellsAnnemarie Huijser, Joop SchoonmanAre interfacial biocatalysts important tools for nonpolluting technologies? 2. Immobilization of lipases and their  representative applications Brindusa Dragoi, Emil DumitriuUASB treatment of fruit canning wastewater: pilot-scale invest...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25180

Modelling and simulation of heavy metals transport in water and sediments
Environmental Engineering and Management JournalVol. 6Nr. 2
AbstractHeavy metals can be transported by rivers which flow through areas with industrial pollution, both as metal in solution and metal adsorbed to suspended solids. They can settle in lakes and accumulate in the sediment, exhibiting significant effects on wildlife and humans if they enter into the food chain.In this work, heavy metals transport and sedimentation is simulated based on an analytical model proposed in literature, considering the material balance and complementary equations, unde...
Autori: Camelia Beţianu, Florina Ungureanu, Loredana Branza, Lucian Vasile Pavel, Maria Gavrilescu, Simona Pintilie
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25197

Environmental Engineering and Management Journal, Vol. 6 Nr. 3
Environmental Engineering and Management JournalVol. 6Nr. 3
Include urmatoarele articole:� Removal of persistent organic pollutants from textile wastewater by membrane processes� Sustainability evaluation of an urban residential settlement� Removal of zinc (II) from aqueous solutions by romanian sphagnum peat moss� Development trends of cold plasma reactors in the global context of carbon emission reduction� Assessing the potential of wind power in Romania within Kyoto targets� Research on the impact induced in the environment by milk process...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25198

Environmental Engineering and Management Journal, Vol. 9 Nr. 1
Environmental Engineering and Management JournalVol. 9Nr. 1
? Kinetics considerations concerning the oxidative degradation by photo-fenton process of some antibiotics ? Catalytic wet hydrogen peroxide oxidation of 4-chlorophenol over iron-exchanged clays ? Researches on the negative effects assessment (slugging, clogging, ash deposits) developed at the biomass-coal co-firing ? Contribution to the study of the environmental heritage of a former chemical plant ? Impact of chemicals on derivatives with important therapeutic activity in C...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25376

Obtaining and characterization of romanian zeolite supporting silver ions
Environmental Engineering and Management JournalVol. 6Nr. 6
AbstractThe aim of this work was to obtain Ag - doped zeolite as antibacterial material using natural and sodium form of zeolite from Mirsid Romania with the dimensions ranged between 0.8-1.2 mm. The comparative structural characterization of natural and Ag - doped zeolite were performed using Laser Induced Breakdown Spectroscopy (LIBS), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and Infrared Spectroscopy (IR). In addition, the ion exchange total ...
Autori: Aurel Iovi, Corina Orha, Cornelia Ratiu, Florica Manea, Georgeta Burtica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25220

A kinetic model for the crystal violet mineralization in water by the electro- fenton process
Environmental Engineering and Management JournalVol. 7Nr. 1
AbstractThe mineralization of acidic aqueous solutions with 0.166 to 1.333 mM Crystal Violet (CV) in 50 mM Na2SO4 as background electrolyte has been studied by the electro- Fenton method, where the oxidizing hydroxyl radicals were produced from the Fenton reaction between added ferrous ions and hydrogen peroxide generated at a oxygen- diffusion cathode. The influence of a new operating factor on the mineralization degree has been investigated: anode material (platinum versus boron doped diamond)...
Autori: Carmen-Ionela Alexandru, Eric Brillas, Ilie Siminiceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25229

Assessment of water pollution potential by acide drainage
Environmental Engineering and Management JournalVol. 7Nr. 1
AbstractAn assessment of acide drainage forming potential for a mining waste material resulted in a former mine of nonferrous and precious metals ore has been made. The waste material has the following contents: 2,20?·2,28% sulphide sulphur, 2,53?·2,58% Fe, 0,07% Cu, 0,05% Zn, 0,36?·0,40% Pb, 0,008?·0,013% Ca and 3,85?·7,97% sulphate. Bacterial leaching tests in percolating columns during 380 days have been made. The leaching liquor has been recirculated at a liquid:solid ratio of 1L:1kg. After ...
Autori: Vasile Oros
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25239

Surfactant - modified natural zeolites for environmental applications in water purification
Environmental Engineering and Management JournalVol. 7Nr. 2
AbstractThis paper presents an overview of research related to use of surfactant modified natural zeolites (SMZ) in water and wastewater treatment. The most common natural zeolite, widely used as starting material is clinoptilolite, but other natural zeolites have also been used (chabasite, heulandite, mordenite). In the first part, the preparation methods and the influence of process parameters on the final product properties is reviewed. The discussion is focused on the influence of surfactant...
Autori: , Cezar Catrinescu, Roxana Elena Apreutesei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25241

Evaluation of lead pollution in Bucharest. Part II: Theoretical aspects of risk management strategy for impact of lead on human health
Environmental Engineering and Management JournalVol. 7Nr. 2
AbstractDespite its well known toxic effects, lead continues to be a part of modern life. Lead concentrations in the environment have increased steadily throughout history, with a huge increase when lead became a common additive to paint and gasoline. Although the use of lead in gasoline and most paint has been banned in many countries, there are still many ways for lead to be released on the environment. The effects of lead on human health have been the subject of significant international exam...
Autori: Alina Murariu, Aurelia Meghea, Ioana Lacatusu, Mihaela Mihai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25244

Utilization of coal fly ash from power plants I. Ash characterization
Environmental Engineering and Management JournalVol. 7Nr. 3
AbstractA comprehensive characterization of fly ash from Iasi, Romania has been carried out in order to set up the utilization potential of fly ash resulting in appreciable amounts from thermal power plants as a waste, which leads to soil and groundwater contamination, as well as atmospheric pollution. This fly ash can be classified on the base chemical and technological properties in F class. Having in mind the assignment of the processing conditions, the fly ash can be used as sorbent for poll...
Autori: , Maria Harja, Marinela Bărbuţă, Nicolae Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25259

Synthesis of highly ordered titanium-containing SBA-15 mesoporous silicas for catalytic eco-friendly oxidations
Environmental Engineering and Management JournalVol. 7Nr. 3
AbstractMesoporous Ti-SBA-15 materials have been synthesized up to a Si/Ti ratio of 20 using a two-step pH adjusting method. Low angle X-ray diffraction and diffuse reflectance UV-Vis spectroscopy revealed that the optimal pH value to synthesize highly ordered mesoporous solids having Ti atoms primarily in tetrahedral coordination environments is around 7.5. The nitrogen physisorption and TEM indicated also ordered mesostructures having relatively large surface areas and uniform mesopore size di...
Autori: Adrian Ungureanu, Alexandru Chirieac, Brindusa Dragoi, Cezar Catrinescu, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25263

Sustainable combined utilization of renewable forest resources and coal in Romania
Environmental Engineering and Management JournalVol. 7Nr. 3
AbstractAs answer to European Community politics, in Romania the researches for waste reworking and ecological treatment are developing. The researches are focusing on wood wastes for its recovery in energy purposes. The purpose is the enlargement of superior coal utilization area obtained from Jiu Valley coal field, for increasing the efficiency of heating installations for domestic consumption, concordantly to European and Romanian pollutions regulations.Combined utilization of the fuel compos...
Autori: Camelia Bădulescu, Eugen Traistă, Gheorghe Lăzăroiu, Maria Orban, Valeriu Plesea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25267

Research on the impact induced in the environment bymilk processing industry 4. The impact induced by the ecological dairy farm Panaci (Suceava)
Environmental Engineering and Management JournalVol. 7Nr. 4
AbstractThe investigation focused on the impact on the environment caused by a dairy farm which supplies SC CAMYLACT LTD Panaciwith raw materials, a milk processing unit whose impact on the environment was analyzed. The material balance for the activityon the farm was resized and, thanks to this, the synthetic indicators of the impact on the environment, such as the specificinfluents of materials and specific effluents could be calculated....
Autori: Constantin Hutupas, Mihai Nicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25276

Removal of nickel from aqueous solution by Nordmann FIR (ABIES Nordmanniana (STEV.) SPACH SUBSP. Nordmanniana) cones
Environmental Engineering and Management JournalVol. 7Nr. 4
AbstractBiosorption an alternative process is the uptake of heavy metals from aqueous solutions by biological materials. The biosorption of nickel ions from aqueous solution was investigated by Nordmann fir (Abies nordmanniana (Stev.) Spach. subsp. nordmanniana) in a batch adsorption system as a function of pH, initial metal concentration, biomass dosage, contact time. The data showed that the maximum pH for efficient sorption of Ni(II) was 6.5. At the optimal conditions, Ni(II) ion biosorption ...
Autori: Handan Ucun, Ozkan Aksakal, Yusuf Kaya
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25295

Microbial cellulose as support material for the immobilization of denitrifying bacteria
Environmental Engineering and Management JournalVol. 7Nr. 5
AbstractThe purpose of this study was to investigate the immobilization of denitrifying bacteria on microbial cellulose (MC) for biological denitrification. A novel denitrifying bacterium, Pseudomonas stutzeri, was immobilized in microbial cellulose and introduced into an up flow packed bed reactor in order to remove nitrate from synthetic influent. The MC presented the high biomass concentration throughout the experiment, achieving 3.4 mg biomass/g support. The efficiency of the system for deni...
Autori: Abbas Rezaee, Hatam Godini, Hossein Bakhtou
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25302

Biomass - A source of chemicals and energy for sustainable development
Environmental Engineering and Management JournalVol. 7Nr. 5
AbstractNowadays, energetic utilization of biomass, biotechnology attracts a big attention not only from the environmental point of view but also have a social, political and economical impact. According to the Directive 2003/30/EC of the European Parliament and the European Council the emission of greenhouse gases can be reduced by 49% using bioethanol produced by a manufacturing process based on corn, instead of crude oil based fuels. Moreover in Hungary from 1st of July 2007 only gasoline wit...
Autori: , , Gyula Marton, , Jenő Hancsók, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25312

Environmental Engineering and Management Journal, Vol. 7 Nr. 5
Environmental Engineering and Management JournalVol. 7Nr. 5
Include urmatoarele articole:� Biomass - A source of chemicals and energy for sustainable development � Equilibrium study of Pb(II) and Hg(II) sorption from aqueous solutions by moss peat� Wood-based epoxy resins and the ramie fiber reinforced composites� Studies on the interaction between birch veneer and compounds with biocide potential action� Effect of methanogenic inhibitors, inocula type, and temperature on biohydrogen production from food components� Energy from biomass in pul...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25313

Studies on equipment corrosion in catalytic reformation of C1 - C5 fraction
Environmental Engineering and Management JournalVol. 7Nr. 6
AbstractObservations and data regarding the intense corrosion and deposit phenomena of the carbon steel tube bundle of the heat exchanger are presented. The bundle ensures the cooling of the light fraction C1 - C5 from the top of the distillation column which carries out the removal of pentane and smaller derivates into the RC equipment. Chemical and mineralogical analyses confirm the aggressive action of the fluids flowing through the exchanger. Tests have been done in order to replace the carb...
Autori: Ana-Daniela Georgescu, Lucian Georgescu, Maria Apostolescu, Nicolae Apostolescu, Ovidiu Georgescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25333

Removal of some environmentally relevant heavy metals using low-cost natural sorbents
Environmental Engineering and Management JournalVol. 8Nr. 2
Abstract        The sorption of metal ions from aqueous solution plays an important role in water pollution control and in recent years there has been considerable interest in the use of low-cost adsorbents. Many researchers have tried to exploit naturally occurring materials as low-cost adsorbents, for removing of heavy metals. In this article the removal performance of various low-cost adsorbents derived from agricultural waste or natural material is evaluate...
Autori: Raluca Maria Hlihor, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25379

Socio-environmental impact of idol immersion: dimensions and directions
Environmental Engineering and Management JournalVol. 8Nr. 1
AbstractIndia possesses a diverse and rich cultural heritage and is renowned as a 'land of festivals'. These festivals attract massive community involvement paving way to new materials such as 'Plaster of Paris' being used for 'modernizing' the representation of idols with very little thought given to the issues of toxicity and environmental impacts. Another dimension to the whole issue is the plight of the artisans and the workers involved in the trade. Owing to the unorganized nature of the in...
Autori: Nanda B. S. Kumar, Raghunath Babu Are, Santosh M. Avvannavar, Shrihari Surathal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25349

CsHSO4/mesoporous silica composites - new electrolytes for solid acid fuel cells
Environmental Engineering and Management JournalVol. 8Nr. 1
AbstractHigh proton conductivity of CsHSO4 opened new opportunities for applications as electrolyte in solid acid fuel cells (SAFC). Relatively recent, it was proved that the accommodation of this solid electrolyte by silica supports improves its proton conductivity. During this work, solid acid CsHSO4 and its composites with mesoporous silica of SBA-15 and MCF-types as host materials were synthesized and studied for the first time. Studies were mainly focused on the influence of mesoporous supp...
Autori: Adrian Ungureanu, Brindusa Dragoi, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25366

Environmental Engineering and Management Journal, Vol. 8 Nr. 2
Environmental Engineering and Management JournalVol. 8Nr. 2
Include urmatoarele articole:� Environmental Engineering and Management Journal, Vol. 8 Nr. 2� Bioengineering aspects of tissues culture bioreactors for medicine and environmental applications� Removal of bis (1-chloro-2-propyl) ether from wastewater using sonodegradation and biodegradation� A novel plasma reactor for toluene decomposition in contaminated air flow� Study of the copper (II) removal from aqueous solutions by chelating resin Purolite S930 � Analysis of some metal levels...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25371

Environmental Engineering and Management Journal, Vol. 8 Nr. 3
Environmental Engineering and Management JournalVol. 8Nr. 3
� Bioremediation of contaminated air using a bioscrubber� Quality risk evaluation of the groundwater resources on the moldavian area� Electrochemical characterization of some dental materials in accelerated environmental testing� Preliminary study of simple and Fenton oxidation with hydrogen peroxide applied on final effluents from a zootechnical farm� The environmental impact assessment caused by the dykes failure� Revaluation of beer industry byproducts – medical implications� ...
Autori: http://www.ecozone.ro/reviste.php?RID=25372

Environmental Engineering and Management Journal, Vol. 8 Nr. 4
Environmental Engineering and Management JournalVol. 8Nr. 4
� Photocatalytic properties of titania - fly ash thin films� Study of the viscosity of some biodiesel – diesel oil blends� Aspects refering to technical and leaching properties of the secondary aluminium slags - cement composites� Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolites� Cu-Ni nanostructured electrocatalysts obtained by electrocodeposition� Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

Environmental Engineering and Management Journal, Vol. 8 Nr. 5
Environmental Engineering and Management JournalVol. 8Nr. 5
� Photocatalytic properties of titania - fly ash thin films� Study of the viscosity of some biodiesel – diesel oil blends� Aspects refering to technical and leaching properties of the secondary aluminium slags - cement composites� Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolites� Cu-Ni nanostructured electrocatalysts obtained by electrocodeposition� Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

Environmental Engineering and Management Journal, Vol. 8 Nr. 6
Environmental Engineering and Management JournalVol. 8Nr. 6
� Physiological changes in seedling germination and growth plant under chemical stress conditions� Studies on sorption and transport processes of cadmium in soils� Assessment of the anthropogenic impact on water systems by fluorescence spectroscopy� Research on the effects of soil improvement by fertilization on the quality of winter wheat� Halotherapy: From ethnoscience to scientific explanations� Study regarding the sorption of erythrosine from aqueous solution onto soil� Hydroxy...
Autori:
ISSN: 1582 - 9596
http://www.ecozone.ro/reviste.php?RID=25375

Materials processing using solar energy
Environmental Engineering and Management JournalVol. 8Nr. 2
AbstractThe main aspects refer to metals and refractory materials behaviour, at high temperature, to materials purifying and to achieve some chemical syntheses.The main technological parameter of the heating is temperature, heating obtained by focusing Sun's rays. The heating can be used inside the furnace to produce metallic material into a crucible, without any complementary power source.For the future, a bigger interest presents some other metals melting, more expensive than steel, such as ti...
Autori: Petrica Vizureanu, Cornel Samoila, Daniel Cotfas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25387

Treatment and management of distillery fermentedfruit spent marc. I. Processing into compacted solid fuel
Environmental Engineering and Management JournalVol. 8Nr. 2
AbstractThe study presents the processing possibilities for marc resulted as still residue from the distillation of fermented fruits in view to obtain a compacted solid fuel. Initial marc composition (carbon, hydrogen, nitrogen, sulphur and oxygen contents) determined by elemental analysis is evidenced, as well as technical characterisation (ash and moisture contents) and ash's qualitative composition, chemical characterisation of the liquid phase (pH, total phosphorus, acidity and conductivity)...
Autori: Daniela Simina Stefan, Anca-Ileana Penu, Mircea Stefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25391

Study of adsorption equilibrium of some wet aircomposite material systems
Environmental Engineering and Management JournalVol. 8Nr. 2
AbstractEquilibrium data of water vapor adsorption from wet air on several materials were experimentally determined at temperature values of 313 and 333 K and air relative humidity values ranged between 30 and 90 %. Experimental data were correlated with Langmuir and Freundlich models. The obtained results emphasize the significant difference between the water retained on the adsorbent materials impregnated with various salt solutions, and on classic adsorbents....
Autori: Ioan Mămăligă, Constantin Baciu, Stelian Petrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25394

Application of natural materials as sorbents for persistent organic pollutants
Environmental Engineering and Management JournalVol. 8Nr. 2
AbstractPersistent organic pollutants (POPs) are toxic chemicals that adversely affect human health and the environment around. This group of priority pollutants consists of pesticides, industrial chemicals and unintentional by-products of industrial processes. Natural materials, waste from industry and agriculture and bioadsorbents can be employed as inexpensive adsorbents to remove POPs from environmental components by sorption processes. The paper presents various natural sorbents and some ou...
Autori: Laura Carmen Apostol, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25395

Decontaminate effect of the functionalized materials with undoped and doped (Ag) TiO2 nanocrystals
Environmental Engineering and Management JournalVol. 8Nr. 2
Abstract This paper presents the preliminary results of photocatalytic oxidation of humic acid from water using two types of catalysts, i.e., TiO2 and Ag-doped TiO2 modified zeolite (TMZ and Ag-TMZ). TMZ and Ag-TMZ, with zeolite granulation of 315-500 ?¬m was synthesized by sol-gel method, and the morphology and composition of the unmodified/modified zeolite were characterized by BET (Brunauer–Emmet–Teller) method, X-ray Diffraction (XRD), scanning electron microscopy (SEM) and energy dis...
Autori: Cornelia Ratiu, Carmen Lazau, Paula Sfirloaga, Corina Orha, Daniela Sonea, Stefan Novaconi, Florica Manea, Georgeta Burtica, Ioan Grozescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25397

Assessment of some heavy metals in soils, drinking water, medicinal plants and their liquid extracts
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract Pollution with toxic metals is a serious concern, because once these elements enter in the soil they can be present for a long time, with the potential contamination of drinking water sources. Certain metals in soil may be taken up by plants which are subsequently harvest for human consumption. Our objective was to study the presence of heavy metals in soils, groundwater sources, some medicinal plants from areas of the water sources and in its watery extracts. All of the samples, af...
Autori: Diana Diaconu, Victor Nastase, Mara Mihaela Nanau, Ovidiu Nechifor, Elena Nechifor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25411

Researches on possibility to recover and reuse the Iron(II) sulphate from etching of rolled steels
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract The etching of iron materials in sulphuric acid solutions allows the dissolution of the iron oxides with formation of iron sulphates. The relatively low solubility of the formed sulphates imposes their separation for avoiding the contamination of the etching bath, as well as for preventing the environmental pollution through the wastewater. Within the flow sheet of the processing of the hot or cold rolled steel, a stage of separation by crystallization of iron sulphate is foreseen. T...
Autori: Liliana Lazar, Ion Balasanian, Florin Bandrabur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25415

Utilization of coal fly ash from power plants II. Geopolymer obtaining
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract Study of geopolymer is a developing field of research for capitalizing solid waste and by-products in the view of new materials achievement having characteristics necessary for using as cement substitute. Also, it provides a solution to many problems regarding environment, such as reduction of gaseous emissions and particles matter resulted from cement industry and raw materials economy. In this paper, the experimental conditions for obtaining new materials on the basis of fly ash f...
Autori: Maria Harja, , Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25419

Reactive dyes removal from wastewater by combined advanced treatment
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract Textile industry is one of the most pollutant and water consuming industries. Large quantities of water are required in materials preparation and dyeing, so consumption and waste generation have become serious concerns for textile manufacturers and finishers. Textile effluents are characterized by high values of quality indicators such as BOD and COD, suspended solids and heavy metals. A serious environmental problem and also an aesthetic problem is the color of the effluent. Reactiv...
Autori: Daniela Cailean, George Barjoveanu, Corina - Petronela Musteret, Liliana Rozemarie Manea, Nicolae Sulitanu,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25420

Sustainable use of vegetal fibers in composite materials. Sources of vegetal fibers
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract Transition to a more sustainable economy and the consequences of the Kyoto protocol on global climate change, includes a shift of feedstock for energy and chemical industries from fossil fuels and petrochemicals to renewable resources. The use of vegetal fibers as major source of renewable resources represents a valuable alternative both from economical and environmental points of view. Traditionally, vegetal fibers are widely used in textile industry, paper manufacture, and packagin...
Autori: Dan Gavrilescu, Bogdan Marian Tofanica, Adrian Catalin Puitel, Puiu Petrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25431

Electrochemical characterization of some dental materials in accelerated environmental testing
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract The aim of this study is to investigate the electrochemical behavior of a three casting non-precious dental alloys: Vera PDI (Co-Cr based), Heraenium (Ni-Cr based) and NPG+2 (Cu-Al based) three test solutions: artificial saliva (AFNOR, pH = 8), acidified saliva (pH = 2.5) and fluoridated acidified saliva (1000 ppm F-, pH = 2.5). Open circuit potential (EOC) measurement; potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) are the electrochemical proce...
Autori: Daniel Mareci, Daniel Sutiman, Adrian Cailean, Julia Claudia Mirza Rosca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25435

Quality risk evaluation of the groundwater resources on the moldavian area
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract The analysis over the underground water monitoring system and the collected data from survey drilling show that the underground water has an unsatisfactory quality due to some physical and chemical characteristics. Along with these, factors like the surface water pollution, the hydrodynamic exchange between surface and underground waters and the reintroduction in the agricultural activities of nitrates and phosphorus based fertilizers lowers, as well, the quality that it has been tal...
Autori: Ioan Crăciun, Catrinel-Raluca Giurma-Handley, Ion Giurma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25436

Options for the valorization by recirculation of powder material for steel manufacture in EAF
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract This paper aims to propose a new solution for rational valorization of the secondary powder materials from steel makingin electric arc furnaces. The elaborated steel quality as well as the economical advantages represented by secondary powdermaterials recirculation were studied. A good correlation between the proportion of brickets loaded into the melt and the melting ofcarbon has been found. The proportion of the EAF dust brickets can grow even at 5-7%. Zinc presence could havenegat...
Autori: Mirela Gabriela Sohaciu, Avram Nicolae, Cristian Predescu, Stefan Velicu, Gheorghe Gh. Calea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25438

Opportunities for valorization of steel slags
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Using slag in steel making represents a challenge for road construction industry and decreasing environment interactions also.Steel making slag wit granulations of < 10 mm, which today have not a sure solution, represents the research object. The technological research solutions have aimed reducing CaO free content in these slugs, and reducing slug fraction with granulationof ...
Autori: Florian Zaman, Mirela Gabriela Sohaciu, Ecaterina Matei, Cristian Predescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25439

High-purity products from plastic waste: The w2plastics project
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The European annual consumption of plastic materials has increased from 24.6 Mtons in 1993 to 39.7 M tons in 2003 and it is likely to keep growing. Europe is faced with the challenge of managing millions of tons of waste plastics. At the same time, polymer recyclers and manufacturing industries do not find enough secondary polymers of consistent quality. Plastics production and use has a range of environmental impacts because of the considerable quantity of resources needed as raw ma...
Autori: Peter Rem, Venga Solaria, Francesco Di Maio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25444

Nanocomposite materials based on polymers and alumina nanoparticles
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The synergistic combination of polymers and inorganic compounds via sol-gel process has attracted great attention, by manipulating structure at molecular level, for developing new materials with desired properties. These new hybrid materials could have a controllable combination of the benefits of polymers (flexibility, toughness, ease of processing) and those of ceramics or glasses (hardness, durability, thermal stability). The microstructures and the properties of hybrid materials...
Autori: Lucia Dumitrescu, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25446

Energy conservation and CO2 emissions reduction for clinker portland cement manufacturing process
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract At present, dangerous industrial wastes are a main source of environmental pollution because they are stored and deposited improperly. Besides, dangerous industrial wastes could also be a source of secondary raw materials which are not well capitalized. This fact causes substantial losses of secondary raw materials and energy and it is explained by the lack of certain technologies of treatment, capitalization and final removal that are technically and economically sustainable. To ide...
Autori: Neculai Mihailescu, Vasilica Daescu, Elena Holban, Mariana Nicoleta Badea, Jenica Paceagiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25447

Preliminary investigation aimed to ecological reclaiming by phytoremediation of a large flotation tailing dump in baia mare mining area
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The flotation tailing pond Bozinta is located at 5 Km West from Baia Mare town. It is closed and is preparing for ecological reclaiming. Preliminary investigations have been made on the meteorological and climatologic indicators of the site. The temperature, air relative humidity, the wind speed, the rain values and the soil temperature have been measured during the vegetation period of 2008 year. The air temperature on the tailing pond is always 1?·2 0C higher than the values regist...
Autori: Vasile Oros, Mirela Coman, Monica Marian, Leonard G. Mihaly, Anca Mihaly
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25452

Sludge recycling in ceramic matrix
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract In the new millennium to sustain a healthy life in harmony with nature, it will be extremely important to develop various materials and processes that minimize any harmful influence on the environment. The feasibility of sludge recycling in the brick manufacture was evaluated through laboratory testing. Several ceramic masses with clay, sand and various proportion of sludge have been synthesized and than characterized by their physical-mechanical properties. Sludge fineness also has ...
Autori: Ana - Maria Szoke, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25454

On the influence of ETS - 10 porosity and surface properties in retention of some nanoions and nanomolecules
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Mesoporosity of about 7 nm in ETS-10 titanosilicate was generated by postsynthesis treatment with hydrogen peroxide under microwave irradiation, resulting in an increased external surface area of the materials (55 m2/g). The influence of titanosilicate porosity and its surface modification by phosphorus atoms (ET(P)S-10) on the retention of some nanoions (??-emitting radioactive U(VI) and Th(IV) ions) and biomolecules (the proteins cytochrome c, papain, and ??-globulin) was investiga...
Autori: Robert Gradinaru, Sorin O. Valu, Stefan Postolache, Claudiu C. Pavel, Ion Sandu, Karin Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25455

Iron oxides from electrofilter ash for water treatment (arsenic removal)
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Arsenic (As)-contaminated drinking water is a major problem around the world. The removal efficiency depends strongly on the size of Fe3O4 sorbents.Fe3O4 prepared in laboratory is more efficient in the removal of As and is also more easily recovered from column of magnetic separator than the commercial materials. This would be beneficial in a water treatment system because the As-contaminated Fe3O4 could be flushed from the column permitting reuse of the separator system. The dispers...
Autori: Ionel Balcu, Adina Segneanu, Marius Mirica, Mirela Iorga, Catalin Badea, Iuliana Firuta Fitigau
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25456

Sorption removal of chromate in single batch systems by uncalcined and calcined Mg/Zn-Al - Type hydrotalcites
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract This work investigated the sorption removal of chromate anion, in single batch systems, from aqueous solutions. The process involves the sorption of the chromate by a series of Mg/Zn-Al - type hydrotalcites, with four Mg/Zn/Al ratios, in two forms: uncalcined and calcined at 500 °C. The calcined Mg-Al (Mg/Zn/Al = 2/0/1) material showed the highest sorption capacity: 35.7 mg/g. The three-parametered Langmuir-Freundlich model approximated the experimental equilibrium data over the con...
Autori: Laura Cocheci, Rodica Pode, Eveline Popovici, Emiliana Dvininov, Aurel Iovi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25461

Clouds influence on the solar radiation for a mountain location
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract In designing an efficient photovoltaic system, the meteorological data of the system location must be considered. Field data registered over years prove the importance of the implementation site characteristics in the design and optimal exploitation of a PV system, because wetting and atmospheric gaseous and particulate pollution can strongly distort the incident solar radiation. Thus, in addition to the efficiency of the solar module, the tracking efficiency, the clouds crossing fac...
Autori: Dorin Valentin Diaconescu, , Ioana Sinziana Hermenean, Maria Monica Vatasescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25464

Electrochemical degradation and determination of 2,4-dinitrophenol from water
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Certain conventional and alternative carbon-based electrodes, i.e., glassy carbon electrode (GCE) and, commercial boron-doped diamond electrode (BDDE) were investigated and compared for the electrochemical determination and degradation of 2,4-dinitrophenol (2,4-DNP). The electrochemical behavior of electrodes in the presence of target pollutants was investigated using cyclic voltammetry (CV), chronoamperometry (CA), and multiple-pulsed amperometry (MPA). The duality of the electrode ...
Autori: Adriana Bebeselea, Cristina Proca, Florica Manea, Ciprian Radovan, Georgeta Burtica, Joop Schoonman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25469

New ecomaterials for wood preservation
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Wood has been used as an engineering material because it is low in cost, renewable and strong and it requires low processing energy. Wood has many excellent properties that result from its exceptional combination of microstructural, ultrastructural and molecular features. The main drawback is its dimensional instability in the presence of moisture, which can affects also the biological stability. Wood is susceptible to degradation in a number of ways, including rot or decay, insect a...
Autori: Lucia Dumitrescu, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25473

Membrane support of polyetheretherketone
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract A crucial stage which makes the other directions of development of membrane processes is getting new membrane materials, to meet increasingly stringent of selectivity and productivity. Polyetheretherketone shows high stability against chemical and physical agents but is poorly soluble in most common solvents. Present studies on obtaining the support of the polyetheretherketone membranes were limited by: solubility of polyetheretherketone in concentrated sulfuric acid and fast speed a...
Autori: Mihaela Emanuela Craciun, Aurelia Cristina Nechifor, Florin Aldea, Gheorghe Nechifor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25475

Anticorrosive protection system based on nanocomposites
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Corrosion control, using inhibitors like, polymerisable porphyrins and multifunctional nanocomposites, is extremely useful in many environments. Phosphogypsum is a waste product resulted from the process of obtaining the phosphoric acid and it can be also used as corrosion inhibitor; in a mixture with other coating materials. Two types of modified porphyrin: Na4TFP Ac - dissolved in KOH and H2SO4 and H2TPP - dissolved in benzonitrile, were tested. The structure characterization of pho...
Autori: Ionel Balcu, Adina-Elena Segneanu, Marius Constantin Mirica, Mirela Ioana Iorga, Corina Amalia Macarie, Iuliana Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25477

Microwaves effect over biomass hydrolysis
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Changing fuel consumption to a more ecological environmentally alternative is replacing fossil fuels with fuels generated from renewable resources. Ethanol, a renewable fuel, can be produced mainly from crops, lignocellulosic biomass and different other environmental wastes. Although ethanol has been produced mainly from crops, there is a great interest in using cheaper lignocellulosic materials as a feedstock for ethanol production. The aim of this paper is study of dilute acid hyd...
Autori: Ionel Balcu, Adina-Elena Segneanu, Marius Constantin Mirica, Mirela Ioana Iorga, Corina Macarie, Raluca Martagiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25481

Nanoparticle-based materials for catalysis
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Highly dispersed nanoparticles of transition and noble metals are utilized for hydrocarbon reactions and rearrangements important to the chemical industry. The need to obtain 1 to 3 nm particles with narrow size distributions has prompted the development of alternative processing methods. Due to widespread speculation concerning the enhanced properties of nanoparticles over their bulk and atomic material equivalents, nanoparticle synthesis has become an active field of research withi...
Autori: , Irina Dumitriu,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25482

New materials for water ozonization
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Application of ozone is known to yield favorable results in purification of phosphate plant water from elemental phosphorus, in treatment of water of alkali aluminate solutions of aluminum plants, in decontamination of cyanide-containing waste water of enrichment plants, and so on. It has been proved that halogen-containing compounds, most of which have mutagenic properties, and some of which are carcinogenic to humans, are formed when water is treated with chlorine. Conclusions made...
Autori: Irina Dumitriu, ,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25483

Gold nanoparticles for biological target conjugates
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Nanotechnologies may have properties of self-assembly, stability, specificity, drug encapsulation and biocompatibility as a result of their material composition. Nano-particles are being actively developed for tumour imaging in vivo, bio-molecular profiling of cancer biomarkers, and targeted drug delivery. These particles are stable, environmentally benign, and their chemical properties can be easily tailored by chemically modifying their surfaces. Conjugated with pharmacological a...
Autori: Simona-Florentina Pop, ,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25484

The impact of regional development on the environment
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Various specialists draw attention on the conflict between the industrial civilization and the environment and mention two aspects: 1. The tendency of depletion of natural energy resources, raw materials and food, or consumption of renewable into a rhythm superior to their capacity of regeneration 2. Physical damage and pollution of the environment: water, air and land. It can be said that a sustainable society is the one that shapes its economic and social system so that natural ...
Autori: Dan Duran, Irina Duran, Ciprian Costescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25485

Issues on costs and investment for environmental protection
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The concept of sustainable development has emerged in order to correlate the need to continue increasing the level of human and increasingly fragile â€?health?? level of environment. At the industrial level, things have moved more quickly. Thus, many companies use waste as fuel, and in some localities they are trying to implement systems for heating cottage on the combustion of waste. They are first to have acknowledged the eco-economical importance of recovery and reuse waste....
Autori: Dan Duran, Irina Duran, Adrian Diaconu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25488

East european particularities of the sustainable development
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The paper presents a case study developed within the Danube Environmental Center from the Romanian University â€?Gheorghe Cristea?? of Bucharest. This center is targeted toward linking the material science with the sustainable development concepts, in order to move the awareness of the community alongside sustainable development, as a leading concept of the European development, which becomes essential for the new members as well, in the environmental education field, the geopo...
Autori: Lidia Cristea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25489

Utilization of waste materials in concrete production for sustainable development
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract In order to reduce the cement content used in concrete production utilization of waste materials for substitution of a part of cement can be considered. In this study, two pozzolanic-waste materials, silica fume and fly ash, are used as a part of cement up to 12% and 40%, respectively in concrete and compressive strength as well as permeability properties were determined. The test results were evaluated by using the response surface method. By keeping the cement content in concrete c...
Autori: Dogan U. Anil, Ozkul M. Hulusi, Ekincioglu Ozgur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25490

Density of ecological wooden briquettes obtained from woody biomass
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The paper proposes itself to present some aspects about woody biomass as renewable source of energy and about one of the main product namely wooden briquettes. There will be put the accent on physical features of wooden briquettes namely its density but there has be not forgotten the ecological influences. It is also stated the conditions of experimental, type of machine that is used in laboratory experiments, type and feature of raw material and wooden briquettes. Finally some condi...
Autori: Aurel Lunguleasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25491

Compression strength of branch wood as alternative eco-material to stem wood
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The evolution of the request in wood production leads to larger stem wood consumption, intensive harvesting and consequently the environmental impact increases. One of the most ignored secondary resources in spite of limited reserves, branch wood could be used in new added value products as an alternative to stem wood, providing its characteristics are known and understood. This paper is part of a larger research project, which here compares the compression strength parallel to the g...
Autori: Lidia Gurau, Marina Cionca, Cristina Timar, Alin Olarescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25492

Ecological polymer used for macro-defect-free cements (MDF) production
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Macro-Defect-Free (MDF) cements are polymer-cement composites characterized by high value of flexural strength. Due to their thermal and electrical insulating properties, MDF cements could replace other insulators obtained by environmental non-friendlier technologies or being themselves toxic and non-biodegradable. MDF cements obtained by the use of an ecologic polymer (poly(vinyl alcohol)) shows high mechanical resistance in the initial state but also it’s dramatic decrease after ...
Autori: , Georgeta Moise, Hulusi Ozkul, Ozgur Ekincioglu, Catalin Croitoru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25493

Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic acid from aqueous solutions
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Molecular imprinting is a versatile and ecological method for obtaining polymeric materials with a lot of applications in the field of pharmacy, medicine and biosensor assays. In this work, a new method of alternative molecular imprinting to design imprinted poly (vinyl alcohol) films has been proposed. Glycyrrhizinic acid has been used as template molecule. To demonstrate the obtaining of the molecular imprinted poly (vinyl alcohol) and its selectivity, studies of glycyrrhizinic and...
Autori: , Catalin Croitoru, Georgeta Moise
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25495

Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolites
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Phenols and chlorophenols are contaminants in soils, sediments, surface waters and groundwater, largely because of their worldwide utilization in the last 50 years as wood preservatives and general biocides in industry and agriculture. The toxicity of chlorophenols and their persistence in the environment require advanced treatment techniques for their removal. This study presents the results of a comparative evaluation of the adsorption of phenol and 4-chlorophenol from aqueous sol...
Autori: , Cezar Catrinescu, Roxana Elena Apreutesei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25497

Aspects refering to technical and leaching properties of the secondary aluminium slags - cement composites
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The purpose of this work is to investigate the secondary Al slag (SAS) relating to its technical and environmental properties and, as consequence, to its compatibility with Portland cement matrix. This study may be a contribution to establish of SAS potential valorization as secondary raw material (SRM) in low strength cement matrix composites, as construction products. DRX mineralogical analyses revealed that SAS includes transition alumina compounds, especial boehmite. The hydrati...
Autori: Maria Gheorghe, Nastasia Panait, Romanita Teodorescu, Maria Roman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25498

Emerging processes for soil and groundwater cleanup - potential benefits and risks
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract The cleanup of environmental pollution involves a variety of techniques, ranging from simple biological processes to advanced engineering technologies. Cleanup activities may also address a wide range of contaminants. Technologies to remediate contaminated soil fall into two principal clean-up approaches: in-situ (which is always done onsite), or ex-situ (which can be done on- or off-site). In-situ treatment deals with contamination without removing material from the ground, while ex...
Autori: Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25501

The carbohydrates synthesis in Calendula Officinalis l. Leaves influenced by some mutagene substances
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract It is known that carbonhydrates are precursors of all bioactive substances we tried in thes paper work to do some investigation on these substances in the environmental area of Iasi. To observe the influence of some chemical mutagens substances on carbohydrates biosynthesis we conducted investigations on plant material (leaves) taken from the Calendula officinalis L species. We used this assay to examine the effects of the herbicide 2,4- dichlorophenoxyacetic acid (2,4-D), etidium br...
Autori: Constantin Leonte, Roxana Vatavu, Teodor Robu, Irina Volf
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25502

The product's anticipated success ratio on the turbulent markets: A genuine tool for the agile enterprises
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract To become "flexible" is the equivalent of becoming successfully for almost any firm - the activities based on old and traditional product "recipes" are, obviously, excluded. But, in the framework of a global economy crisis, the statistics seems to prove that flexibility is no longer enough in order to avoid troubles. At the same time, another statistics prove that almost 80% of the products are failing at their first release on market. The paper presents a genuine marketing aggregate...
Autori: Gabriel-Petru Luca, Ion Verzea, Irina Cozminca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25511

Impact of landfill leachate on soil quality in Iasi county
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract Waste management hierarchy has as priorities waste recycling and energy recovery. Unfortunately, Romania is in the situation so as the waste landfilling is still considered as a suitable solution for waste management. European Union imposed a number of regulations and programs in the field of waste treatment and management that Romania must comply. The paper describes some aspects regarding characterization of the leachate originating from the Tomesti landfill (situated in Iasi County...
Autori: Ana-Maria Schiopu, Brindusa Mihaela Robu, Ion Apostol, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25523

Wastes used in obtaining polymer composite
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract In the paper is analyzed the possibility of using some industrial wastes for obtaining new building materials. From the industry or from the power station a lot of by-products or wastes have resulted and their storage is a big problem for the environment. In the building material industry a part of these wastes can be used in different ways: for replacing the cement, as addition in concrete, as component of cements, in the mixture of polymer concrete, etc. In the present investigati...
Autori: Marinela Bărbuţă, Nicolae Taranu, Maria Harja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25525

A new technology to obtain ecological steels
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract A friendly technology with the environment which consists of the elaboration of carbon steels through specific proceedings to powder metallurgy has in view the contribution of methane gas in iron powders at the same time with sintering. This technology is advantageous from various points of view: the final product is a part which does not need afterward processing with solid waste result and therefore the specific energy consume is lower, the wear and corrosion behavior is similar to...
Autori: Olimpia Ghermec, Cristian Ghermec, Traian Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25526

Leaching of copper from cement-based waste materials
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract The use of appropriate leaching tests and leaching models can help to predict the hazardous components release from cementbased solidified waste during either utilization or disposal. Numerous parameters influence the leaching rates such as grain size/specimen size,ccc liquid-to-solid ratio, pH value of the leachate, leaching time etc. This study evaluates the effect of initial liquid-to-solid ratio of cement paste on the release of copper from cement-based solidified waste. Dynamic ...
Autori: Constantin Bobirica, Liliana Bobirica, , Ionel Constantinescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25527

Driving forces and barriers for sustainable use of recovered paper in papermaking
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract Recovered paper is a valuable raw material for the paper industry at global level. Paper made from recovered paper reduces the demand on forests, uses less energy, water and chemicals, produces less toxic releases and reduces solid wastes that must be landfilled or incinerated. This paper is mainly aiming to analyze the driving forces for sustainable use of recovered paper and to discuss the benefits of recovered paper use on paper and board production, as well as on the environment....
Autori: Dan Gavrilescu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25528

Using of industrial waste materials for textile wastewater treatment
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract Sorption is one of the several methods that have been successfully utilized for dyes removal. A large number of materials have been used as suitable sorbents for decolourization of industrial effluents: activated carbon (the most common but expensive adsorbent), polymeric resins, various low-cost adsorbents (agricultural and industrial by-products, peat, chitin, silica, bentonite, other clays, fly ash). Our paper is a review about our researches regarding different types of industri...
Autori: Daniela Suteu, Carmen Zaharia, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25532

Studies regarding the potential of biodiesel production in the north-east development region of Romania
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract It is well known that the conventional fuels are responsible for environmental pollution. On the other hand, the unconventional sources for energy and biofuels are more environmentally friendly with a lower pollution degree than the conventional ones. Following the European Union Directive 2003/30/EC regarding the use of biodiesel in mixture with conventional diesel and its gradual replacement, Romania has either to produce its own percentage of biodiesel for the mixture or to import...
Autori: Teodor Robu, Alexandru Dragos Robu, Aurel Chiran, Elena Gindu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25540

A green route to synthesize CeO2 nanoparticles
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract The paper presents the surfactant-assisted solvo-thermal route to synthesize nanoparticles of cerium oxide with different shape and morphology. The precursor was calcined at 400°C for 4 h in order to obtain CeO2 nanoparticles. The obtained samples were characterized by means of thermal analysis and FTIR spectroscopy. The UV-Vis analysis was used to study the optical properties. The morphologies and nano-structures were characterized by scanning electron microscopy (SEM) and XRD. It...
Autori: Nicolae Apostolescu, Gabriela Carja, Gabriela Apostolescu, Elena Husanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25541

Study of morphology for geopolymer materials obtained from fly ash
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract Geopolymerization is a continuous developing field of research for utilizing solid waste and by-products. It provides a solution to many problems where hazardous residue has to be treated and stored under critical environmental conditions. Consumption of fly ash in the manufacture of geopolymer is an important strategy in making materials more environmentally friendly. Fly ash has been chosen as a base material in order to utilize this industrial waste. Previous researches have show...
Autori: Maria Harja, Marinela Bărbuţă, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25542

New carbonic adsorbents for industrial sorting purification in vodka production
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract Modern requirements for activated carbons utilized in the refinement of water/alcohol mixtures are discussed. It is demonstrated that activated carbons obtained from coconut shells and apricot and peach stones are very similar in terms of durability, physicalchemical and adsorptive properties, providing high quality sorting. Utilization of novel stone-derived carbons allows 2,5 fold enhancement of filtration rate, as well as 3 fold enhancement of working resource of carbon columns. ...
Autori: Viktor Mihailovici Mukhin, Natalia Alexandrovna Shubina, Irina Mihailovna Abramova, Inna Dmitrevna Zubova, Tudor Grigore Lupascu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25543

Self-bonded ets-10 pellets containing iron
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract In this work the experimental conditions to synthesize, by direct hydrothermal synthesis, self-bonded pellets of ETS-10 phase containing iron were studied. The following gel composition was used: xNa2O-0.6KF-1.28xHCl-yFe2O3-0.2TiO2-1.49SiO2-39.5H2O with 0.8Â???xÂ???1.4 and 0.015Â???yÂ???0.08. The products obtained were characterized through X-ray diffraction on powders (XRD), thermal analysis (TG, DSC, DTG), scanning electron microscopy (SEM) and microanalysis (EDS). The data obtai...
Autori: Pierantonio De Luca, Danilo Vuono, Monica Filice
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25544

Improvement of buildings ambiental comfort by using environmental friendly materials and methods
Environmental Engineering and Management JournalVol. 8Nr. 6
Abstract Starting from the disadvantages of the polystyrene system – the most important being that they are not biodegradable and their life cycle is relatively small, up to fifteen years – there were conceived several structures for outside walls made of perforated bricks vertically disposed and filled with granular materials. In this manner the thermal resistance is improved knowing that in gaps bigger than twenty millimeters there appear convective streams which substantially decrease ...
Autori: Răzvan Giuşcă, Vladimir Corobceanu, Raluca Giusca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25551

Recycling of waste from the grinding operations
Environmental Engineering and Management JournalVol. 8Nr. 6
Abstract This paper introduces and analyses the results of some research regarding the recovery of fine chips from the slurry resulted from the finishing operations (grinding) of the parts used in automobile industry. Little chips, in the form of slime, represent a very important source of raw materials when preparing the powders and at the same time it can be appreciated that the volume of these chips in the form of slurry is high enough so that its use can substantially diminish the product...
Autori: Olimpia Ghermec, Cristian Ghermec, Marin Didu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25552

Arsenate removal by Withania frutescens plant from the south-western Morocco
Environmental Engineering and Management JournalVol. 8Nr. 6
Abstract Withania frutescens plant from the south-western Morocco was used as an environmentally friendly material for the removal of As(V) ions from aqueous solutions. This work presents the characteristics of the adsorption and the desorption processes of As(V) using the dried W. frutescens plant as an environmentally friendly adsorbent. The mass of the adsorbent, the As(V) concentration, the contact time and the pH of the tested aqueous solutions were used as controlled variable parameters...
Autori: Mohamed Chiban, Gabriela Lehutu, Fouad Sinan, Gabriela Carja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25568

Textile wastewater treatment by homogeneous oxidation with hydrogen peroxide
Environmental Engineering and Management JournalVol. 8Nr. 6
Abstract The textile wastewaters have a diverse composition depending both on the used raw materials and applied manufacturing technologies. These wastewaters may contain various pollutants such as organic compounds (e.g. residual dyes), suspended solids, metal ions etc. Most of dyes are synthetic compounds with aromatic molecular structures and non-biodegradable. The oxidative destruction via homogenous oxidation processes with hydrogen peroxide (simple chemical oxidation with H2O2 or advanc...
Autori: Carmen Zaharia, Daniela Suteu, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25570

Overview on paper and board recycling in Europe
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract In Europe, recovered paper is a valuable raw material for the paper industry already since the early 20th century, actually corresponding to half of the total use of fibres for paper and board production. The aim of this paper is to describe the present status of paper recycling in Europe and thereby to create a data basis for evaluation the results of the FP7 project ?Recovered Paper Sorting by Innovative Technologies ? SORT IT. The overview is based on specific questionnaires addre...
Autori: Dan Gavrilescu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25579

Enhancement of separation performances of a new azoic derivative from industrial water and the posibility to recover its complex as nanomaterial
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract In order to obtain new complexes of Fe(III) with multiple uses, their characteristics, important applications and also the obtaining conditions are studied. The obtaining conditions consist in mixing solutions of the same concentrations of ligand 2 amino-6-methoxy-benzothiazole sulphonic acid??†’1-naphtol-4-sulphonic acid with FeCl3. The solutions are mixed in molar ratios of 1:1, 2:1 and 3:1 (ligand to central metallic atom). For determining the molar ratio ligand:central metall...
Autori: Daniela Zavastin, Doina Sibiescu, Igor Creţescu, Ioan Roşca, Mihaela Dana Tutulea, Mihaela Vizitiu
ISSN: 1843-3707
http://www.ecozone.ro/reviste.php?RID=25581

New complexes used to increase the dying process efficiency of the textile materials in the context of sustainable development
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract This work presentes a study of preparation and stability in aqueous medium of complexes obtained by the reaction between Fe(III) with 2-amino-6-methoxy-benzothiazol-sodium sulphonate ??†’1 naphtol-4-sodium sulphonate. In this purpose, the investigation methods applied were as follows: pH-metry, conductometry, and the UV-VIS spectrophotometry. The molar combination ratio of ligand to central metallic atom, and the stability constants for new obtained compounds were determined usin...
Autori: Doina Sibiescu, Gabriela Carja, Ioan Roşca, Laura Chirila, Mihaela Vizitiu, Romen Butnaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25585

Chelating sorbent containing two types of functional groups hydroxamic acid and amidoxime for lead (II) ions effluent management
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract The removal efficiency of Pb(II) from aqueous solutions by sorption on a bifunctional acrylic ion exchange resin with groups of hydroxamic acid and amidoxime is presented. It was found that Pb(II) sorption potential varies as function of solution pH, initial metal concentration, contact time and temperature. From aqueous solutions with Pb(II) initial concentration of 82.96 ?ŽÂ?g/mL the sorption percentage is 98.64%. The Langmuir and Freundlich isotherms were used to model the Pb(II) ...
Autori: Anca Ceica, Carmen Paduraru, Igor Creţescu, Lavinia Tofan, Violeta Neagu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25586

In vitro corrosion study by electrochemical and surface analysis techniques of a ti50ta alloy for dental applications
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract Commercial pure titanium (Cp-Ti) and titanium alloys are used on large scale in restorative dentistry due to their advantages as compared with other similar materials: chemical inertia, low density, high strength, high corrosion resistance in biological media and increased biocompatibility.The effect of fluoride and pH on the corrosion behaviour of Cp-Ti and a new Ti50Ta alloy were examined by open circuit potential (EOC) measurement, linear polarization, potentiodynamic polarization...
Autori: Daniel Mareci, Daniel Sutiman, Georgiana Ciurescu, Igor Creţescu, Romeo Chelariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25591

Biosorption of malachite green from aqueous solutions onto biomaterials
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract The use of biomaterials as biosorbents for treatment of wastewaters will provide as a potential alternate to the conventional treatment methods. The main advantages of biosorption are high selectivity , cost effectiveness and good removal performance. World wide numerous low cost bio materials have tried for biosorption of dyes. In this present investigation, the dead biomass of Penicillium sp. fungus and wood sawdust was used as biosorbents and their capacity to removed malachite gr...
Autori: Cornel Pohontu, Florin Luca, Igor Creţescu, Manea Liliana, Mariana Diaconu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25593

Calendula officinalis L., diclorphenoxiacetic acid (2,4 D), mutagenic, polyphenolic acids
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract The former Arad Chemical Fertilizer Plant had an important polluting effect on environment and, although it was shut down in 1990, its environmental heritage still exists. The paper contains a short description of the former plant and its impact on the environment, mainly on the quality of water and soil and emphasizes the effects of polluting heritage that still exists. Today, one of the major problems on the platform of the former Fertilizer Plant is the existence of all concrete b...
Autori: Aurica Grec, Florin Dumescu, Ladislau Klein
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25599

Adaptive neuro-fuzzy approach for sand permeability estimation
Environmental Engineering and Management JournalVol. 9Nr. 2
Abstract Characterization of soil permeability is of great importance for several geotechnical analyses. In common practice, because of the difficulty in sampling of granular material, constant head permeability tests are usually employed on specimens having similar relative densities to those in the field. An alternative approach to permeability tests for granular soils is the prediction of permeability levels by means of empirical equations depending on several particle size distribution an...
Autori: Alper Sezer, Burak A. Goktepe, Selim Altun
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25609

Towards an intelligent tutoring system for environmental decision makers
Environmental Engineering and Management JournalVol. 9Nr. 2
Abstract The paper presents a novel approach which aims to support the training of decision makers in maritime environmental pollution policies via an intelligent tutoring system that focuses on the automatic generation of self-assessment material. More specifically, the paper reports on the automatic construction of multiple-choice question tests from knowledge bases i.e. domain ontologies, instances, if-then rules, and multimedia objects. The reported work has been conducted with a prototyp...
Autori: Andreas Papasalouros, Konstantinos Kotis, Nikitas Nikitakos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25613

Environmental Engineering and Management Journal, Vol. 9 Nr. 8
Environmental Engineering and Management JournalVol. 9Nr. 8
? GREEN SYNTHESIS OF SYMMETRICAL CARBONATE FT-IR STUDY ? SINTERED BASALT AS A PROMISING SUSTAINABLE MATERIAL IN MECHANICAL ENGINEERING ? DESIGN OF BUILDINGS INCLUDING ENVIRONMENTAL IMPACT ? ANALYSIS METHODS FOR PYRAZINE-2,3-DICARBOXYLIC ACID SYNTHESIZED USING ELECTROCHEMICALLY REGENERATED KMnO4 ? RESEARCH ON NaCl SALINE AEROSOLS II. NEW ARTIFICIAL HALOCHAMBER CHARACTERISTICS ? DETERMINATION OF AEROSOLS POLLUTANTS ON MEMBRANES. 1. MEMBRANES PREPARATION AND CHARACTERIZATIO...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25660

Environmental Engineering and Management Journal, Vol. 9 Nr. 9
Environmental Engineering and Management JournalVol. 9Nr. 9
? STUDY OF BIODIESEL PRODUCTION FROM OILSEED PLANTS II. EVALUATION OF BIODISEL PRODUCTION FROM SOME CULTIVARS OF RAPES ? STUDY OF BIODIESEL PRODUCTION FROM OILSEED PLANTS I. EVALUATION OF THE GENETIC SIMILARITY OF SOME Brassica Napus CULTIVARS USING RAPD MARKERS ? STRUCTURAL CHARACTERIZATION AND IN VITRO CYTOTOXIC POTENTIAL OF COAL DUST IN A ROMANIAN POWER PLANT ? MUNICIPAL SOLID WASTE MANAGEMENT IN BENGHAZI (LIBYA): CURRENT PRACTICES AND CHALLENGES ? COMPARATIVE ENVIRONM...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25661

Environmental Engineering and Management Journal, Vol. 9 Nr. 11
Environmental Engineering and Management JournalVol. 9Nr. 11
? COMPARATIVE CONSIDERATIONS ON THE STRUCTURE OF SOME MOLYBDENUM/NIOBIUM DOUBLE PEROVSKITES OXIDES ? THE INFLUENCE OF THE STORAGE TIME ON THE STABILITY OF BUTTER ? CaCO3 CONTROLLABLE SYNTHESIS BY DOUBLE EXCHANGE METHOD USING CaCl2 RESIDUAL SOLUTIONS ? OPTIMIZATION OF COAGULATION-FLOCCULATION IN THE TREATMENT OF CANAL WATER ? ANODIC DETERMINATION OF PENTACHLOROPHENOL FROM WATER USING CARBON NANOFIBER-BASED COMPOSITE ELECTRODE ? STUDY OF PRECIPITATES GROWTH IN COAGULATION ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25663

Environmental Engineering and Management Journal, Vol. 10 Nr. 1
Environmental Engineering and Management JournalVol. 10Nr. 1
? COMPACT MICROPULSE BACKSCATTER LIDAR: AIRBORNE AND GROUND-BASED APPLICATIONS ? STUDIES OF THE IMPACT OF AEROSOL OPTICAL PROPERTIES ON CLIMATE CHANGE PROCESSES ? A STUDY OF THE AEROSOL OPTICAL PROPERTIES AT TWO AERONET STATIONS FROM ROMANIA ? COMPLEMENTARY ATMOSPHERIC URBAN POLLUTION STUDIES IN THE NORTH-EAST REGION OF ROMANIA, IASI COUNTY ? ?NGSTR?M TURBIDITY IN THE LOWER LAYERS OF THE TROPOSPHERE ? LIDAR MONITORING OF ANTHROPOGENIC POLLUTION AND NATURAL PHENOMENA ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25665

Environmental Engineering and Management Journal, Vol. 10 Nr. 5
Environmental Engineering and Management JournalVol. 10Nr. 5
? HYDROGEL MICROSPHERES BASED ON ENVIRONMENTALLY FRIENDLY POLYMERS WITH POTENTIAL BIOMEDICAL APPLICATIONS ? STUDY ON THE MIXING EFFICIENCY IN A BASKET BIOREACTOR WITH IMMOBILIZED YEASTS CELLS ? MANAGEMENT OF WASTE FROM ELECTRICAL AND ELECTRONIC EQUIPMENT IN CYPRUS ? A CASE STUDY ? SEPARATION AND CHARACTERIZATION OF ANTHOCYANINS BY ANALYTICAL AND ELECTROCHEMICAL METHODS ? AN INTEGRATED DECISION AID FOR IDENTIFYING AND PRIORITIZING STRATEGIES IN FOREST MANAGEMENT ? INFLUEN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25668

LIFE CYCLE ASSESSMENT FOR CARBON EMISSION OF PLATE GLASS INDUSTRY
Environmental Engineering and Management JournalVol. 10Nr. 6
Carbon issue is becoming more important all over the world. Plate glass is a typical kind of building materials and the life cycle carbon emission of plate glass is a big contributor, resulting from the energy consumption in the stages of its life cycle which includes four aspects: raw materials acquirement, materials transportation, production and embodied consumption of energy carriers. Based on the relevant data calculation from China’s condition, the life cycle carbon emission of plate gla...
Autori: Meng Liu, Wenlong Li, Qunying Cheng, Yueer He, Xinyun Caohttp://www.ecozone.ro/reviste.php?RID=25672

THE ESTABLISHMENT OF EIPs-MFA MODEL FOR THE EVALUATION OF MATERIAL METABOLISM EFFICIENCY IN INDUSTRIAL AREAS
Environmental Engineering and Management JournalVol. 10Nr. 6
Material Flow Analysis (MFA), as a method of Industrial Ecology (IE), is a useful tool to measure and analyze the material metabolism or physical dimensions of a society’s production and consumption at various scales. However, there are different MFA frameworks and points corresponding to different researching scales. This paper proposes to introduce a physical Input- Output Table (PIOT), as means to establish the Eco-industrial parks MFA model (EIPs-MFA) and indicator systems, for analyzing t...
Autori: Yao Shi, Rusong Wang, Jingru Liu, Jianxin Yang, Tianzhen Juhttp://www.ecozone.ro/reviste.php?RID=25676

ADSORPTION OF Cr(VI) ON Fe-Ni MODIFIED BENTONITES
Environmental Engineering and Management JournalVol. 10Nr. 7
A series of sodium bentonites as raw material were prepared to the modified inorganic iron-nickel montmorillonites and organic composite montmorillonites. The structural characterization and morphology of the iron-nickel crosslinked modified bentonites were observed by means of IR spectroscopy, X-ray diffraction, scanning electron microscopy. The effects of the amount of bentonites, adsorption time and pH change on the adsorption of Cr(VI) have also been studied. The results indicated that the a...
Autori: Shao Hong, Cao Ninghttp://www.ecozone.ro/reviste.php?RID=25695

PREPARATION AND CHARACTERIZATION OF CALCIUM ZINCATE SYNTHESIZED BY MICROWAVE METHOD
Environmental Engineering and Management JournalVol. 10Nr. 7
Calcium zincate as an active material in Zn/Ni secondary battery has been successfully synthesized by microwave method. The sample was characterized by X-ray diffraction (XRD), thermogravimetric analysis, scanning electron microscope (SEM), chargedischarge test (CT) and cyclic voltammetry (CV) analysis. The results show that the chemical composition of sample is Ca(OH)2·2Zn(OH)2·2H2O with regular spherical shapes. The results from CV and CT measurement indicate that the battery has very high d...
Autori: Mengliang Tong, Xuanyan Liuhttp://www.ecozone.ro/reviste.php?RID=25700

INCREMENTAL COST ALGORITHM OF WATER-SAVING PROJECTS FOR GREEN BUILDING
Environmental Engineering and Management JournalVol. 10Nr. 7
Because the green building industry starts late in China, both the government and developers have a vague view on incremental cost conception, component and algorithm of water-saving projects for green building. According to the comparative analysis of the project and economic efficiency between green building and traditional building in water-saving and water resource utilization aspect, this material presents the conception, component, algorithm and calculating method of the incremental cost i...
Autori: Qiang He, You-Zhi Hao, Fang Zhao, Hong Xiang Chaihttp://www.ecozone.ro/reviste.php?RID=25703

STRENGTH AND MICRO-STRUCTURAL CHARACTERISTICS OF SLAG-FLY ASH BASED CEMENTITIOUS MATERIALS
Environmental Engineering and Management JournalVol. 10Nr. 7
Slag-Fly Ash Based cementitious material materials with high volume of fly ash and slag and less cement clinker was prepared, with low water requirement, well fluidity and with high strength, and can be used to the preparation of High Performance Concrete (HPC). When the W/C is 0.36, the 28d compressive strength is 58.93 Mpa, 28d flexural strength is 14.26 Mpa. By XRay diffraction analysis (XRD) and Scanning Electron Microscope (SEM) analysis, the results show that main materials in grinded samp...
Autori: Chenghong Fu, Wen Ni, Hui Wu, Mingyang Tianhttp://www.ecozone.ro/reviste.php?RID=25708

PREDICTION OF TiO2 AND WO3 NANOPOWDERS SURFACE CHARGE BY THE EVALUATION OF POINT OF ZERO CHARGE (PZC)
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:Point of zero charge (PZC) is defined as the condition at which the surface charge density of a material equals to zero and, formost of the solids it is strongly pH dependent. The PZC can be controlled by tuning the solid surface properties (crystallinestructure, morphology) and by a proper environment control, thus it is important to evaluate the PZC for a certain type of material,in given working conditions, for enhancing the efficiency in the targeted application (e.g. layer by layer...
Autori: Laura Maria Bertus, Radu Adrian Carcel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25721

CHALLENGES FOR BIO-BASED PRODUCTS IN SUSTAINABLE VALUE CHAINS
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referredto as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chainsincluding activities after end-of-life of products, (2) value communication between stakeholders in extended value chains, and (3)creating an integrated development approach for optimized bio-based products. Most existing models for v...
Autori: J.W. Lin, Jarmila Kopecká, Kim Ragaert, Ludwig Cardon, Maarten De Groote, Rolf Koster
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25728

EXPERIMENTAL RESEARCH ON TRANSIENT REGIMES OF SOLAR AIR HEAT COLLECTORS
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:The operation of solar air heat collectors consists in a sequence of transient regimes, being conditioned by the availability in timeof the solar resource. This paper presents the results of an experimental research on transient regimes of two types of solar air heatcollectors. The absorbers of the collectors have different configurations and are made of different materials. One collector is acommercial passage air collector with the absorber made of aluminum. The other collector is an ...
Autori: Adrian Ciocănea, Andrei Dragomirescu, Sanda Budea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25731

DESIGN OF THE SUSTAINABLE URBAN VEHICLES - NEW CONCEPTS FOR PHOTOVOLTAIC INTEGRATED SOLUTIONS IN AUTOMOTIVE
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:The demand for new and high performance products in the automotive industry is increasing exponentially and this trend imposesinnovative concepts for cars. The future solutions for the automotive industry may find their answer in the fabricationtechnologies and also in alternative propulsion and energy production.The car design field cannot ignore the global economic crisis, imposing new approaches in terms of materials and cost effectivetechnologies and by the means of environmental pr...
Autori: Mihai Comşiţ
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25733

REUSE OF PET WASTE AS THERMOPLASTIC COMPOSITES
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:Composite manufacturing from plastic wastes of polyethylene terephthalate (PET) type, sand-blasting represents a materialrecovery of the wastes. This process can be achieved, with the purpose of reducing the material consumption which is in deficit,production costs, and the duration of the technological processes.Thermoplastics composites obtained by a melting process at 170-200 oC, wastes incorporation and solidification in forms replacesuccessfully the thermo rigid composites obtained...
Autori: Ioan Ropotă, Marcela Muntean, Mihai Bratu, Ovidiu Dumitrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25741

APPLICATION OF SOLAR DRYING TECHNOLOGIES FOR BIOLOGICAL PRODUCTS CONSERVATION
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:The drying of biological materials plays an important role in influencing energy savings, quality of end-products and alsoenvironmental issues. Several new approaches in application of solar dryers and a great number of biological materials have beendeveloped. In the paper the background of solar drying, current solar drying arrangements, and some of the recently focusedbiological products such as grain, fruit, vegetable etc. are selected and discussed. Additionally an integrated energy...
Autori: Istvan Farkas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25745

OPTIMIZATION OF THE STRENGTH STRUCTURE FOR 10 kW WIND TURBINE BLADES
Environmental Engineering and Management JournalVol. 10Nr. 9
Abstract:This technical paper presents some aspects concerning the static finite element analysis of a wind turbine blade. For themanufacturing of the blades for a 10 kW wind turbine elaborated at the Technical University of Moldova composite materialsmade up of polyester matrix reinforced with fiber glass are being used. In order to determine the mechanical properties of theproposed composite materials 10 different samples of laminated composite plates were numerically simulated in ANSYS 11....
Autori: Marin Guţu, Viorel Bostan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25747

COMPACTION COEFFICIENT OF WOODEN BRIQUETTES USED AS RENEWABLE FUEL
Environmental Engineering and Management JournalVol. 10Nr. 9
Abstract:This paper aims to analyze two types of wooden briquettes made from different raw material, in order to determine thecompactness of the wood used, namely their compaction coefficient. This factor is a new feature of briquettes that defines moreprecisely the quality of them. The density of raw material and briquettes causes the compaction coefficient, namely the ratiobetween them. Relevance of research and scientific innovation results from the fact that European standard of wooden briqu...
Autori: Aurel Lunguleasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25753

HYDROTHERMAL SYNTHESIZED TiO2 BASED NANOPOWDERS FOR PHOTOCATALYTIC APPLICATIONS
Environmental Engineering and Management JournalVol. 10Nr. 9
Abstract:Hydrothermal synthesis was used to obtain nanostructured TiO2 based nanopowders. There were prepared pure and ZrO2 dopedcompositions consisting mainly of anatase phase with crystallite size up to 20 nm. The agglomerates of the as-synthesizedmaterials had dimensions ranging from a few hundreds nanometers to 200 microns. The investigations concerning the thermalbehavior revealed the presence of an exothermal effect at around 550oC which could indicate a possible phase transformation ofana...
Autori: Adrian Mihail Motoc, Anca Duta, Oana Raita, Radu Adrian Carcel, Radu Robert Piticescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25758

COMPARATIVE HEAVY METALS AND DYES REMOVAL EFFICIENCY ON FLY ASH AND WOOD ASH
Environmental Engineering and Management JournalVol. 10Nr. 9
Abstract:Ash is a waste that can be an efficient substrate in wastewater treatment for the immobilization of heavy metals and for dyesremoval. For an up-scalable wastewater treatment process, efficient substrates, with relatively constant behavior are needed andmodifying the adsorbent surface can be a feasible solution. Fly ash, resulted from coal burning, and wood ash are mixtures mainlycontaining metal oxides and carbon in various proportion, depending on the initial raw material.The paper pre...
Autori: Maria Visa, Mihaela Nacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25771

LEACHING OF NONFERROUS METALS FROM OXIDIZED LOW GRADE COMPLEX CONCENTRATE
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:The oxidation of low grade complex concentrates (Cu, Pb and Zn) in aqueous media (weak alkaline) oxidized nonferrous metalsconcentrates is carried out at high pressure. Leaching is the subsequent processing step in metal extraction. The paper studies theinfluence of some parameters (temperature, time, L:S ratio, excess) on the leaching efficiency of nonferrous metals from oxidizedconcentrate. The optimum parameters determined are: S/L ratio of 10/1, 25% reactive excess, leaching tempera...
Autori: Cornelia Lupu, Dragoş Taloi, Liliana Gherghe, Luminita Mara, Teodor Velea, Vasile Predica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25774

METALLIC MEMBRANES OBTAINED WITH GRADED STRUCTURE FOR MICROFILTRATION
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:The aim of this work is to obtain sintered porous membranes with graded structure for microfiltration by sedimentation andsintering of metallic powders. Our previous studies have demonstrated the possibility of obtaining sintered porous materials withgraded structure by sedimentation. In this paper, spherical nickel particles were used having a grain size in the 2-90 µm rangemeasured by the laser scattering particle size analyzer. The powders were sedimented into a sintering die in a s...
Autori: Gyorgy Thalmaier, Ioan Vida-Simiti, Nicolaie Jumate, Niculina Sechel, Valentin Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25775

NUMERICAL INVESTIGATION ON CONVECTIVE HEAT TRANSFER IN HIGH TEMPERATURE SOLAR RECEIVER
Environmental Engineering and Management JournalVol. 10Nr. 10
Abnstract:In recent years, solar receivers have been employed in several applications where high temperature fluids are involved, such aspower plants and solar thermal reactor. The possible presence of high temperature gradients could determine reduced receiverefficiency and a short life of the material. Thermal and fluid dynamic analysis of the receiver allows to highlight possible presenceof temperature gradients and to evaluate their values and the more critical zone of the material. Compress...
Autori: Alina Adriana Minea, Oronzio Manca, Salvatore Tamburrino, Sergio Nardini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25779

ECONOMIC AND CONSTRUCTION ANALYSIS OF LIGHTWEIGHT MEMBRANES IN HOUSING IN TEMPERATE CLIMATES
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:Lightweight materials are more viable for use in invariably hot or cold climates than in temperate climates. However, it is possibleto use lightweight construction systems and specifically membranes even in housing buildings in temperate climate areas, if theirproperties are well explored, allowing better environmental performance and cost effectiveness than conventional solutions. In theouter skin and in dividing elements, architectural membranes can be used as thermal regulators, for ...
Autori: António Pedro Reis, João Pedro Couto, Paulo Mendonça
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25781

SYNTHESIS OF NEW CATALYSTS BY INSERTION OF Co AND Cu IN THE MATRIX OF HYDROTALCITE-LIKE MATERIALS FOR CINNAMALDEHYDE HYDROGENATION
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:This study is focused on the influence of Co and Cu ions located in Zn/Ni/Al matrix on the structural, textural and catalyticproperties of layered double hydroxides (LDHs). The samples were prepared by co-precipitation (Ni2+/Co2+(Cu2+)=0.25;M2+/M3+=2)) at low super-saturation and afterwards characterized by XRD, nitrogen physisorption, thermogravimetry, FT-IR, DRUV-Vis and TPR. The XRD results show that the resulted solids are well crystallized and contain only pure phases of LDHs.Also,...
Autori: Adrian Ungureanu, Alexandru Chirieac, Brindusa Dragoi, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25789

USE OF D2EHPA-IMPREGNATED XAD7 RESIN FOR THE REMOVAL OF Cd(II) AND Zn(II) FROM AQUEOUS SOLUTIONS
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:The adsorption performance of a novel support for metal ions sorption and their removal from aqueous solutions was examined.The support is a new solvent-impregnated resin (SIR) which can be considered as an alternative adsorbent material capable ofselective sorption. The adsorbent was prepared by impregnating di-(2-ethylhexyl)-phosphoric acid (D2EHPA) onto AmberliteXAD7 resin beads, by dry impregnation method. The interaction between XAD7 resin and D2EHPA was evaluated by FTIRspectrosco...
Autori: Adina Negrea, Adriana Popa, Cornelia Muntean, Corneliu Davidescu, Lavinia Lupa, Mihaela Ciopec, Petru Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25793

BIOMIMETIC HYDROXYAPATITE COATING ON C.P. Ti AND Ti-6Al-4V ALLOY BY ACID AND ALKALI TREATMENT
Environmental Engineering and Management JournalVol. 10Nr. 11
Abstract:Titanium metal and its alloys have been widely used as implants under load-bearing conditions due to their biocompatibility, excellent corrosion resistance and lightness, but their inability to bond to living bone is a setback. The experiments outlined here investigated hydroxyapatite (HA) coating on Ti metal implants, used to enhance their bioactive properties. In this study, specimens of commercially pure titanium (c.p. Ti) and Ti-6Al-4V were etched in either H3PO4 or HCl, and subsequ...
Autori: Chao-Lun Fu, Hsueh-Chuan Hsu, Shih-Ching Wu, Shih-Kuang Hsu, Wen-Fu Ho
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25795

KINETICS AND EQUILIBRIUM STUDIES OF REACTIVE YELLOW 125 ADSORPTION ON A NITROGEN DOPED TiO2 MODIFIED ZEOLITE
Environmental Engineering and Management JournalVol. 10Nr. 11
Abstract:In this study, the adsorption mechanism of a reactive azo dye, Reactive Yellow 125 (RY 125), onto a nitrogen doped TiO2 modified zeolite (Z-TiO2-N) has been examined in order to identify the affinity of the material for the investigated pollutant envisaging its degradation by heterogeneous photocatalysis. Equilibrium experiments were performed and the data obtained were fitted with different isotherm equations, i.e., Langmuir, Freundlich, and Dubinin-Radushkevich (D-R). The Freundlich i...
Autori: Cornelia Ratiu, Elida Cristina Ilinoiu, Florica Manea, Laura Cocheci, Liliana Andreea Colar, Rodica Pode
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25809

THE FREE LEVEL UNIFORM POST-DARCY FILTRATION THROUGH A SPHERE-MADE HOMOGENOUS MEDIUM
Environmental Engineering and Management JournalVol. 10Nr. 12
This paper refers to the post-Darcy free level uniform filtration. The capillary tube fascicle model is applied to this filtration. The theoretical Ch?©zy coefficient is computed and also experimentally verified for a homogenous and isotropic material, made of glass spheres. The typical features for the free-level post-Darcy filtration (depending on slope) are the lover, critical and higher stages flows....
Autori: Aron Gabor Molnar, Daniel Toacă, Daniel Toma, Iosif Bartha, Nicolae Marcoie, Victor Gabor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25833

ACTIVATED SLUDGE FLOC CHARACTERIZATION BY CONFOCAL LASER SCANNING MICROSCOPY
Environmental Engineering and Management JournalVol. 11Nr. 3
The aim of this work is the study of activated sludge floc samples stained with different dyes and imaged by Confocal Laser Scanning Microscopy (CLSM). Activated sludge flocs were stained for lipids, sugars and esterase enzyme producing bacteria. Images were acquired for different samples to analyze the structural characteristics of the bioaggregates. The analysis of the CLSM images allowed for the localization and estimation of the quantity of different build-up materials. The 3-D reconstructio...
Autori: Bela Abraham, Botond Raduly, Dan Niculae Robescu, Szabolcs Lanyi, Szabolcs Szilveszter, Szilard Bucs
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25937

CONTROLLING THE ACTIVITY AND CHEMOSELECTIVITY IN THE CINNAMALDEHYDE HYDROGENATION BY INSERTION OF NONNOBLE METALS IN THE MATRIX OF HYDROALCITE-LIKE MATERIALS
Environmental Engineering and Management JournalVol. 11Nr. 1
The purpose of this study was to prepare new nanocomposite catalysts of Metal/LDHs type by mild reduction of transition metal cations Co2+ and Cu2+ substituted in the matrix of ZnAl-LDH at 150°C and atmospheric pressure, under hydrogen flow. To this end, a series of ZnCuCoAl layered double hydroxides (LDH) precursors were synthesized by co-precipitation method. M2+/M3+ (i.e., Zn2+/Al3+) molar ratios were kept constant while the Cu2+/Co2+ molar ratios were varied in order to investigate their in...
Autori: Adrian Ungureanu, Alexandra Sasu, Alexandru Chirieac, Alina Moscu Corcodel, Brindusa Dragoi, Constantin Rudolf, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25852

ASSESSING ENVIRONMENTAL IMPACT OF PACKAGING PAPER PRODUCTION BASED ON RECYCLED FIBRE RAW MATERIAL
Environmental Engineering and Management JournalVol. 11Nr. 1
This paper is part of LCA studies performed in the frame of FP7 project �Recovered Paper Sorting by Innovative Technologies - SORT IT�. It analysis the results obtained by Life Cycle Impact Assessment (LCIA) of the reference case for recycled packaging paper manufacturing (current sorting technology), which will constitute a comparison base for new sorting technology developed in SORT IT project. The main stages considered in the life cycle were: recovered paper (RP) transport from collectio...
Autori: Alina Iosip, Antonio Dobon, Elena Bobu, Mercedes Hortal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25860

FILTERING MEDIA FUNCTIONALIZED WITH MONOCHLOROTRIAZINYL-β-CYCLODEXTRIN
Environmental Engineering and Management JournalVol. 11Nr. 1
The present study describes the preparation of a filtering medium from a polymeric cellulosic support (filter paper) by functionalization with monochlorotriazinyl-β-cyclodextrin. The permanent immobilization of cyclodextrins confers the new material special properties and the potential for a better decontamination of liquid and gaseous effluents. The structure, physicomechanical and filtration properties of the filter paper, successfully functionalized with MCT-β-CD, have been emphasiz...
Autori: Ana-Maria Grigoriu, Constantin Luca, Florin Ciolacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25862

MICROWAVE-ASSISTED HYDROTHERMAL SYNTHESIS OF COMPOSITE MATERIALS BASED ON ZEOLITE-TiO2 NANOCRYSTALS
Environmental Engineering and Management JournalVol. 11Nr. 3
The composite materials based on natural zeolite and undoped and N-doped TiO2, i.e., Z-Na-TiO2 and Z-Na-TiO2-N, were successfully synthesized by solid-state reaction in microwave-assisted hydrothermal conditions. Undoped TiO2 and N-doped TiO2 nanocrystals were previously synthesized by sol-gel method. The X-rays diffraction results of TiO2 nanocrystals indicated that anatase TiO2 is the dominant crystalline type. The composite materials were structural and morphological characterized by X-ray di...
Autori: Cornelia Bandas (Ratiu), Carmen Lazau, Paula Sfirloaga, Florica Manea, Rodica Pode
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25911

PHYTOCHEMICAL ANALYSIS OF EXTRACTS FROM INFLORESCENCES OF Calendula officinalis L. SPECIES TREATED WITH MUTAGENE SUBSTANCES
Environmental Engineering and Management JournalVol. 11Nr. 1
The most important argument of this experiment was to demonstrate an increased content of active principles under the influence of some substances (considered in the literature as mutagene), when used in low concentration, do not affect the environment. The purpose of this study was the selection of some treatment variants, which, during the experimentations show the same biosynthetic potential, stabilized or increased. The substances used in the experiment were ethidium bromide at the concentra...
Autori: Constantin Leonte, Marius Zaharia, Roxana Vatavu, Teodor Robu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25867

REMOVAL OF Cd(II) IONS FROM AQUEOUS SOLUTION BY RETENTION ON PINE BARK
Environmental Engineering and Management JournalVol. 11Nr. 1
Among the different types of waste products tested, the bark of different Pinus species have been identified as a promising class of low- cost sorbents for heavy metal binding. In this context, the potential of Romanian pine bark wastes as green and economical sorbent for cadmium (II) ions removal from aqueous solutions has been tested in batch conditions as function of initial pH, contact time, sorbent dose, metal ion concentration and temperature. The equilibrium data at three different temper...
Autori: Anca Miron, Brindusa Robu, Carmen Paduraru, Lavinia Tofan, Roxana Laura Mihailescu Amalinei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25871

IMPROVING SOIL QUALITY BY ADDING MODIFIED ASH
Environmental Engineering and Management JournalVol. 11Nr. 2
Fly ash and fly ash based zeolites are inorganics used for improving soil quality. In the current paper, the hydrothermal modification of fly ash was studied. Three methods have been employed for this purpose. The first method involved the use of an autoclave, where synthesis has been performed at a temperature of 120 0C and a treatment time of 4 to 8 hours. Within the second method, the modification of the ash at a temperature of 600 0C by fusion was carried-out. In this method, a mixture of as...
Autori: Corneliu Munteanu, Daniel Bucur, Lacramioara Rusu, Maria Harja, Marinela Barbuta, Ramona Carla Ciocinta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25885

THE BEHAVIOR OF THE FERROUS MATERIALS MAGNETIZED IN EXTREME CONDITIONS CAUSING ELECTROMAGNETIC INTERFERENCE
Environmental Engineering and Management JournalVol. 11Nr. 2
The paper proposes a method and a technology that allows the generation of a very high intensity magnetic field, at a high pressure and within an extremely short period of time into a ferrous material, in order to study the behavior of such material from the magnetic and structural perspective. The method consists in producing the �compression� of an initial magnetic flux that is generated in a coil that has inside a ferrous material cylinder (the armature), subject to testing, done by a con...
Autori: Nicolae Badara, Octavian Tarabuta, Vasile Dobref
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25887

ADSORPTION OF PHOSPHATE FROM AQUEOUS SOLUTIONS BY THERMALLY MODIFIED PALYGORSKITE
Environmental Engineering and Management JournalVol. 12Nr. 7
AbstractIn this study, palygorskite clay calcinated at different temperatures from 200 to 900 °C was used as adsorbent to removephosphate from aqueous solutions. The crystal structure and the surface property of the thermally modified material wasinvestigated to determinate the relationship between the adsorption capacity of the adsorbent and the changes of the crystalstructure and surface property. The results indicate that palygorskite clay calcinated at 700 °C had the highest adsorptioncapaci...
Autori: Chengsong Qing, Chengzhu Zhu, Dong Chen, Jiayuan Wang, Jingjing Xie, Tianhuhu Chen, Xinmin Zhan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25949

EDITORIAL A SPECIAL ISSUE ON PROGRESS IN ENVIRONMENTAL ENGINEERING, BIOTECHNOLOGY AND MANAGEMENT IN THE FRAME OF KNOWLEDGE-BASED SUSTAINABLE ECONOMY
Environmental Engineering and Management JournalVol. 12Nr. 8
“The Exploratory Workshop „Progress inEnvironmental Engineering, Biotechnology andManagement in The Frame of Knowledge-BasedSustainable Economy” took place in the contextwhen worldwide research shows that the currentindustrial system supports a population that useresources and generates waste, consuming the Earth'ssupply, but who’s biocapacity is far outweighed bythe increased demand of products for a developmentsystem that often works on unsustainable bases.Today’s challenge is the integration ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25969

POLYMERIC WASTES FROM AUTOMOTIVES AS SECOND RAW MATERIALS FOR LARGE SCALE PRODUCTS
Environmental Engineering and Management JournalVol. 12Nr. 8
AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

EDITORIAL - A SPECIAL ISSUE DEDICATED TO - ENVIRONMENTAL CONCERNS ON ELECTROMAGNETIC COMPATIBILITY AND ENGINEERING IN MEDICINE AND BIOLOGY
Environmental Engineering and Management JournalVol. 12Nr. 6
This special issue of EnvironmentalEngineering and Management Journal is dedicated tointerdisciplinary research and discusses multipleresults addressing environmental issues inElectromagnetic Compatibility (EMC) andEngineering in Medicine and Biology (EMB) areas.Some of the most significant researchdirections considered in this issue entail theelectromagnetic pollution together with a survey ofelectromagnetic environment in order to analyze andquantify the biological and health effects ofelectro...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25990

EDITORIAL - A SPECIAL ISSUE DEDICATED TO ENVIRONMENTAL RESEARCH AND TECHNOLOGY ECOIMPULS 2012 INTERNATIONAL CONFERENCE, October 25-26, Timisoara, Romania
Environmental Engineering and Management JournalVol. 12Nr. 5
The first edition of the International Conference„ECOIMPULS 2012- Environmental Research andTechnology” plans to open a conference seriesdedicated exclusively environmental issues. Thescientific topics are devoted to the on-going research onenvironmental topics regarding: „Environment – apolitical, economic and social responsibility”,„Water in a changing world”, „ZERO – waste cities”and „ Energy – beyond the conventional”.This scientific event aims to bring togetherprofessionals, academics, scie...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26015

COMPOSITE MATERIAL BASED ON SILVER-DOPED ZEOLITE AND MULTI-WALL CARBON NANOTUBES FOR HUMIC ACID REMOVAL
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractIn this paper the synthesis, characterization and testing of composite material based on multi-wall carbon nanotubes and silverdopednatural zeolite (MWCNT-ZAg) has been investigated for humic acid (HA) adsorption. The surface characterization of thecomposite material has been investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM/ EDX) analysis.The Langmuir and Dubinin-Radushkevich (D-R) models fitted the best experimental data informing that adsorption process ofH...
Autori: Aniela Pop, Corina Orha, Florica Manea, Virgil Tiponut
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26023

REMOVAL OF TWO INDUSTRIAL DYES FROM AQUEOUS SOLUTIONS USING HYDROTALCITE-LIKE ANIONIC CLAYS AND THEIR DERIVED MIXED OXIDES AS HIGHLY EFFICIENT PHOTOCATALYSTS
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractMultifunctional materials based on iron substituted anionic clays and their derived mixed oxides owning specific porousproperties and textural characteristics are synthesized, characterized and tested as photocatalysts in the process of the azo-dyesdegradation from aqueous solutions. The features of X-ray diffraction patterns point out the modification of the lattice parameterswhen Fe3+ is substituted Al3+ in the brucite like layer. N2 adsorption-desorption analysis reveals specific poro...
Autori: Carmen Gherasim, Gabriela Carjă, Magda Puşcaşu, Mihaela Bîrsanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26024

SYNTHESIS OF NANOCRYSTALLINE ZnFe2O4 AND ITS USE FOR THE REMOVAL OF CONGO RED FROM AQUEOUS SOLUTIONS
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractThe paper describes the synthesis of nanocrystalline zinc ferrite starting from 1,4-butanediol and a mixture of zinc and ironnitrates. During the heating of the obtained solution, a redox reaction takes place with emission of brown nitrogen oxides andformation of a solid powder. This powder was characterized by thermal analysis and FT-IR spectrometry, techniques thatconfirmed the formation of a mixture of zinc and iron carboxylates. This mixture was further used as precursor for zinc fer...
Autori: Cornelia Muntean, Marcela Stoia, Paul Barvinschi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26029

KINETIC, EQUILIBRIUM AND THERMODYNAMIC STUDIES OF CESIUM REMOVAL FROM AQUEOUS SOLUTIONS USING AMBERJET UP1400 AND AMBERLITE IR120 RESINS
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractThe performance of two cation exchanger resins, Amberjet UP1400 and Amberlite IR120 in the process of Cs(I) ions removalfrom aqueous solutions was examined. Batch experiments were carried out to determine the influence of several parameters(resin dosage, contact time, temperature and initial concentration of Cs(I) ions) on the removal process. The equilibrium wasreached after 60 min for Amberlite IR120 and after 120 min for Amberjet UP1400, with an overall adsorption performance of~97% f...
Autori: Adina Negrea, Cornelia Muntean, Corneliu Mircea Davidescu, , Mihaela Ciopec, Petru Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26032

SYNTHESIS OF TITANIUM DIOXIDE WITH HYDROTHERMAL METHOD AND ANTIBACTERIAL ACTIVITY AGAINST E. coli
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractA comparative study regarding the shape, dimension and bactericidal activity of the undoped and Ag-doped TiO2 nanocrystalswas achieved. In this way, two hydrothermal methods, classical hydrothermal and microwave-assisted hydrothermal, was usedfor nanoparticles synthesis. The obtained materials were investigated by X-ray diffraction, DRUV-VIS spectroscopy, BET andSEM/EDX analysis. Antibacterial activity of undoped and Ag-doped TiO2 materials was tested on real water from Bega River.The be...
Autori: Carmen Lazau, Corina Misca, Corina Orha, Cornelia Bandas, Sorin Olariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26034

HYBRID MATERIALS FOR THE REMOVAL OF ORGANIC COMPOUNDS FROM WATER
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractWater quality is an inportant concern for the ecosystem state from a particular region. Since the continuous urban and economicdevelopment induces a negative impact on entire hydrological cycle, this study investigates the water quality of a Romanian lake,located in the Surduc area - Timis County. This perimeter has undergone significant economic development in the past twodecades due to increased tourism potential and the number of holiday residences.We proposed hybrid materias for the ...
Autori: Adina-Elena Segneanu, Cornelia Bandas, Florentina Cziple, Ioan Grozescu, Paula Sfîrloagă, Titus Slavici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26040

A NEW CONCEPTUAL FRAMEWORK FOR ENVIRONMENTAL DECISION BASED ON FRACTAL PHILOSOPHY
Environmental Engineering and Management JournalVol. 12Nr. 5
AbstractThe expression „environmental decision” cannot be explained or summarized by a simple formula containing all the ideasfocused on it.This paper aims to develop a conceptual framework for environmental decision (at organizations level) using fractal paradigmphilosophy in its construction, with the purpose to bring order and simplicity for this type of decision. The study is based on theanalysis of several environmental documentations (existing at the level of large organizations located in...
Autori: Abdessamad Kobi, Christian Robledo, Ionuţ Viorel Herghiligiu, Mihaela Luminiţa Lupu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26043

RESOURCE CONSERVATION IN SANITARY PAPER MANUFACTURING
Environmental Engineering and Management JournalVol. 12Nr. 4
AbstractTraditionally, sanitary papers are obtained from virgin cellulosic fibers. Because the production of virgin fibers requires largequantity of wood it is an unsustainable process. In addition, virgin fiber pulp is expensive and deficient, being unattractive forpaper producers. Using of virgin fiber is a waste, because sanitary papers cannot be recovered. Due to the fact that the price ofsanitary papers must be as low as possible, the paper mills focused on the use of recovered fiber as raw...
Autori: Dan Gavrilescu, Iftimi Viorel, Roxana Vlase
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26067

INVESTIGATION OF ISOTHERMAL AND FIXED-BED COLUMN SORPTION OF Cu (II) ONTO ALMOND SHELL
Environmental Engineering and Management JournalVol. 12Nr. 3
AbstractThe present study reports the efficiency of almond shell as a cheap and available material for the removal of Cu (II) fromcontaminated aqueous solutions. The equilibrium experiments indicated that Cu (II) sorption obeyed the Langmuir isotherm at26, 40 and 55oC. The highest value of the maximum uptake (Qo) from the Langmuir equation was found 6.783 mg g-1 at 40oC.The various thermodynamic parameters such as ΔGo, ΔHo and ΔSo were also calculated. The values of ΔGo varie...
Autori: Soheil Aber
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26080

TECHNICAL SOLUTIONS TO IMPROVE PERFORMANCE OF THE RECYCLED CEMENT CONCRETE AGGREGATES FOR DURABLE ROAD PAVEMENTS
Environmental Engineering and Management JournalVol. 12Nr. 3
AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

SECOND GENERATION BIOFUELS AND BIOMASS
Environmental Engineering and Management JournalVol. 12Nr. 3
Mother Earth Investments AG, is actively working onthe development 2nd generation bioenergy feedstocks.In this book, Mr. Jansen generously shares hisknowledge in the field, in particular, regarding thechallenges and opportunities in development ofbiomass-derived fuels. This essential guide toinvesting in bioenergy commodities details secondgeneration biofuels from a scientific, technical andeconomic perspective, and discusses their globalenvironmental, political and financial impact.The book is ...
Autori: Roland A. Jansen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26100

THE ROLE OF GREEN CHEMISTRY IN BIOMASS PROCESSING
Environmental Engineering and Management JournalVol. 12Nr. 3
The book edited by Haibo Xie and NicholasGathergood focuses on one of the most importantscientific issues of the 21 century which is thereplacing fossil fuel with sustainable alternatives suchas biomass. Fossil fuels are conventional rawmaterials for many industrial sectors includingchemical and energy production. Usage of fossil fuelis limited by their availability, price and carbonfootprint. Biomass is a renewable resource globallyavailable, cheaper and carbon sequestering. Step bystep shiftin...
Autori: Adrian Catalin Puitel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26101

REDUCED UPTAKE OF Cd AND Pb BY Miscanthus sinensis x giganteus CULTIVATED ON POLLUTED SOIL AND ITS USE AS BIOFUEL
Environmental Engineering and Management JournalVol. 12Nr. 2
Abstract The cultivation of Miscanthus sinensis x giganteus on a polluted soil near Copsa Mica – Romania has started in 2008. Since then every March and August the roots and stems have been analyzed, showing a very low amount of heavy metals in the aerial parts in February, when the harvesting takes place. The combustion properties of the material are similar to those of lignite, but without sulphur and with low ash amount. Because cultivation of edible plants poses the risk of hea...
Autori: Constantin Horia Barbu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26106

BIODEGRADATION OF POLY(HYDROXYBUTYRATE)/POLY(VINYL ALCOHOL) BLENDS BY FILAMENTOUS FUNGI
Environmental Engineering and Management JournalVol. 12Nr. 2
Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

FLY ASH FROM THERMAL POWER PLANT, RAW MATERIAL FOR GLASS-CERAMIC
Environmental Engineering and Management JournalVol. 12Nr. 2
Abstract Waste recycling represents a very significant issue for the protection of our environment. Large waste quantities (slag and ashes) are products of the coal extraction industry and its subsequent combustion in thermal power stations. The possibilities of obtaining crystallized glasses in the CaO-Al2O3-Fe2O3-SiO2 system by introducing in the raw materials mixture ashes from Mintia Deva thermal power station have been studied. The physical and chemical characterization of the...
Autori: Firuţa Goga
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26121

EFFICIENCY OF FILTERS WITH DIFFERENT FILTERING MATERIALS: COMPARATIVE STUDY IN WATER TREATMENT
Environmental Engineering and Management JournalVol. 12Nr. 1
Abstract In order to accomplish the water quality standards required for a specific use, the continental surface water is treated through a sequence of operations and unit processes. The treatment technological flowsheets carry out, partially or totally, the removal of various pollutants, every treatment step being used for improving one or more qualitative parameter. The treatment scheme is specific to water source type and water use. One of the basic operations for water treatmen...
Autori: Oana Tirtoacă Irimia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26136

MACRO AND ULTRA-MICRO SCALE CHANGES OF RAPESEED SEEDLINGS GERMINATED FROM SEEDS EXPOSED TO UVA-VIS RADIATIONS
Environmental Engineering and Management JournalVol. 12Nr. 1
Abstract Our researches have focused primarily on variations of different biophysical and biochemical effects on vegetal and animal material at macro, micro, and ultra-micro scale resulted from changes in environmental condition. Growth and spectral parameters of rapeseed seedlings from seeds exposed to UVA-VIS radiation with a high pressure lamp which emits incoherent continuously radiation for different time periods were examined 14 days after germination. These studied parameter...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26138

ESSENTIAL TOOLS TO MITIGATE VRANCEA STRONG EARTHQUAKES EFFECTS ON MOLDAVIAN URBAN ENVIRONMENT
Environmental Engineering and Management JournalVol. 12Nr. 1
Abstract In a world of uncertainty, the only constant is change and rapid change produces a multitude of diverse facts. Risk is an integral part of life. While no country in the world is entirely safe, the lack of capacity to limit the impact of hazards remains a major burden for all countries and while the world has witnessed an exponential increase in human and material losses due to natural disasters, there is a need to reverse trends in vulnerability to earthquakes. Available d...
Autori: Gheorghe Mărmureanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26140

DYNAMIC MECHANICAL COMPRESSION OF ROCK MATERIAL WITH DIFFERENT WEATHERING DEGREES
Environmental Engineering and Management JournalVol. 12Nr. 9
AbstractRock dynamic mechanical characteristic is the basic information to study the damage of rock structures under dynamic loadsinduced from earthquake or blasting. A nuclear power plant site is a granite mountain of the same active tectonic period. Dynamic triaxial compression experiments need to be conducted on the drill cores of different project parts according to the design requirements. These drill cores were formed in the same active tectonic period, but as a result of the different bur...
Autori: Liu Bo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26163

EFFECTS OF CHLORINE IONS ON THE PHOTOELECTROCATALYTIC DEGRADATION OF ORGANICS USING HIGHLY ORDERED TiO2 NANOTUBE ARRAYS
Environmental Engineering and Management JournalVol. 12Nr. 9
AbstractAs a new type of photoelectrocatalytic materials, the TiO2 nanotube arrays have drawn a lot of attention for efficientlyphotoelectrocatalytic organic pollutants degradation due to their highly photoelectrocatalytic properties. Yet, the performance ofphotoelectrocatalytic organics degradation using TiO2 nanotube arrays electrode is influenced by Cl-, a kind of typical reducingmaterial. This paper focuses on the effect of Cl- on the different photoelectrocatalytic performance of TiO2 nanot...
Autori: Jialing Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26177

IMPROVING THE ENVIRONMENTAL PERFORMANCES OF IRON POWDERS CARBURIZING PROCESS IN A METHANE-BEARING ATMOSPHERE
Environmental Engineering and Management JournalVol. 12Nr.10
AbstractConsidering the advantages of steel surface hardening, when less expensive low- and medium- carbon steels can be surfacehardened without the problems of distortion and cracking associated with the through hardening of thick sections, we developedsome research entailing the increase in environmental performance of iron powders carburizing process using methane as carrier.Apart of studies on optimal working parameters and methods, our research addresses improvements in environmentalperform...
Autori: Olimpia Ghermec
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26198

APPLICATION OF A DECISION SUPPORT SYSTEM TO THE TRANSPORT OF HAZARDOUS MATERIALS
Environmental Engineering and Management JournalVol. 12Nr.10
AbstractThe transport of hazardous substances is an essential economic activity because it represents a quite relevant percentage of thetotal goods transportation. The risk associated to such an activity is fundamentally related to the possibility of an accidenttriggering that may cause negative environmental and public health consequences. A recent example is the Viareggio accident(2009), which involved the blast of tank wagons containing liquefied petroleum gas (LPG) and caused more than thirt...
Autori: Vincenzo Torretta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26200

FAST AND ECONOMICALLY VIABLE REMOVAL OF A CATIONIC DYE FROM AQUEOUS SOLUTIONS: KINETIC AND EQUILIBRIUM MODELLING
Environmental Engineering and Management JournalVol. 12Nr. 11
AbstractAdsorption of a cationic dye, methylene blue, from aqueous solutions by using sawdust (without any modification) by batchadsorbers was investigated. The surface characterization of the saw dust was carried out by Fourier transform infrared (FTIR) andscanning electron microscopy (SEM) and pHzpc of the surface was also determined. Effects of different parameters such ascontact time and initial concentration, temperature and pH on the process of removal were studied. The process of removal ...
Autori: Sushmita Banerjee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26216

EFFECTS OF CANNED FOOD INDUSTRY SLUDGE AMENDMENT ON ENZYME ACTIVITIES IN SOIL WITH EARTHWORMS
Environmental Engineering and Management JournalVol. 12Nr.12
AbstractWastewater sludges are organic and nutrient-rich materials that could be used to improve soil tilth. However, the land applicationof sludge needs to be properly managed to avoid the detrimental effects on micro and macroorganisms in the soil. Earthwormsare one of the most important soil macroorganisms. Addition of sludge to the soil environment may impact earthworm activity,and in turn, soil productivity and health. In this study, sludge from the canned food industry was added to soil mi...
Autori: Efsun Dindar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26238

STUDIES ON BUILDING CERAMICS MANUFACTURING BY INCORPORATING DRIED SLUDGE
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractThe paper analyses the opportunity of recycling sewage sludge in the manufacturing of ceramic building materials. Wastewatertreatment plants (WWTP) produce annually a great volume of sludge and its processing become more difficult. On the otherhand, there is an increased need to develop new alternatives beyond the already known methods. The use of WWTP sludge asraw material for the production of bricks may become an interesting alternative, both from an industrial and environmental point...
Autori: Anna-Maria Szőke
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26251

COMPUTER-AIDED IMAGE ANALYSIS AND EPR CHARACTERIZATION OF TRANSFORMED ASBESTOS CONTAINING WASTES
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractInvestigations on thermochemical transformation of asbestos fibers followed by computer aided image analysis are presented.Asbestos Containing Wastes (ACW), notably asbestos-cement, were characterized before and after microwave heating withadditives aimed at reacting with and transforming asbestos fibers. Microprobe analysis helped determine the chemicalcompositions. X ray diffraction (XRD) was used to confirm decomposition of asbestos fibers during microwave heating. Electronparamagneti...
Autori: Yan Yvon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26256

URBAN ENERGY SAVING AND CARBON REDUCTION POTENTIAL OF NEW-TYPES OF BUILDING MATERIALS BY RECYCLING COAL MINING WASTES
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractThe construction industry is one of the main sectors of energy consumption and carbon emissions in China. The new-types ofbuilding materials can be produced by recycling industrial solid wastes which is an effective solution to development of greenbuilding materials and abatement of environmental emissions. In this paper, new-types of bricks made of fly ash (residuesgenerated in coal combustion) and coal gangue (a kind of solid wastes generated in coal mining and coal production) and the...
Autori: Haitao Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26265

UTILIZATION OF OIL WELL-DERIVED DRILLING WASTE IN SHALE-BRICK PRODUCTION
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractThe main objective of this study is to investigate the utilization potential of oil well-derived drilling waste (DW) in the firedshale-brick production. Different mixtures were suggested for the experimental work with the DW content varying from 20% to40%. The prepared briquettes from different mixture were fired at a temperature ranging from 950°C to 1050°C for 1 h, with aheating rate of 2~3°C /min. Water absorption, apparent porosity, bulk density, weight loss by ignition, firing shrin...
Autori: XiangGuo Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26269

SOLID MATERIAL MOTION LAW IN VERTICAL FEEDING SYSTEM WITHIN FULLY MECHANIZED COAL MINING AND BACKFILLING TECHNOLOGY
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractBased on principles of feeding solid waste into vertical boreholes in fully mechanized coal mining and backfilling technology,the literature established a trajectory model of particles in gas-solid two-phase flow for the sake of reducing the damage tostorage silo underground done by enormous impulsive force generated by falling solid waste. In addition, dynamical analysismethod in gas-solid two-phase flow field was adopted herein to study the solid particles’ force characteristics and th...
Autori: Nan Zhou
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26271

STUDY ON THE REMOVAL CHARACTERISTIC OF ACID VIOLET DYE FROM SYNTHETIC WASTEWATER USING A NOVEL RHA/PFA/CFA SORBENT
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractA novel RHA/PFA/CFA sorbent was developed by sol-gel method using three types of ashes, i.e. rice husk ash (RHA), palm oilfuel ash (PFA) and coal fly ash. From surface analysis of selected RHA/PFA/CFA sorbents, the spent sorbent had more compactstructures covered by irregular rough surface and the specific structure of raw RHA, PFA, and CFA were no longer visible. Inaddition, lower specific surface area was obtained for spent RHA/PFA/CFA sorbent. Batch studies were performed to evaluatet...
Autori: Irvan Dahlan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26272

REMOVAL OF FLUORIDE IONS BY ION EXCHANGE RESIN: KINETIC AND EQUILIBRIUM STUDIES
Environmental Engineering and Management JournalVol. 13Nr. 1
AbstractThe extent of the problem of the excessive fluoride in drinking water remains an important health issue. In the present work,strong-base anion resins were investigated to assess their sorptive removal capacity of fluoride from water. It was found that theremoval of fluoride was high at natural pH (7) and was improved for increasing contact time and adsorbent dosage. Themaximum sorption of the resin was 13.7 mg/g according to the Langmuir model, namely higher than the values reported in t...
Autori: Mohammad Taghi Samadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26273

INFLUENCE OF REFILL SOIL AND BUILDING MATERIAL EQUIVALENT DOSE RATE ON NEW NUCLEAR POWER PLANT SITES
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractLithuania is planning to construct a new nuclear power plant nearby the closed one. The possible radioactive pollution can be one of the main problems in its surroundings. Results of investigations of the gamma radiation equivalent dose rate (EDR) at new nuclear power plant sites are presented. Main factors influencing the level of the EDR are identified and evaluated, and geological structure of alternative sites is discussed. The gamma spectrometry data showed that the dominant influen...
Autori: Raselė Girgždienė, Vigilija Cidzikienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26277

ESTIMATION OF OPTIMUM FILTER CAKE IN PRODUCTION OF IMPERMEABLE LAYER USING FUZZY LOGIC
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractWorldwide, waste materials are produced as a by-product of industrial manufacturing and placed in storage areas. One of the waste materials is filter cake (FC). FC is formed during the infiltration of cooling water in steel factories. The main aim of this research is determination of optimum usage of FC in the production of impermeable layer on ground by using fuzzy model approach. Because of this, in the study, FC as a waste material was hardened with cement and an impermeable layer was...
Autori: İlker Bekir Top�u, Murat Karacasu, Tayfun Uygunoğlu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26288

REMOVAL OF As(III) AND As(V) FROM AQUEOUS SOLUTION USING MODIFIED SOLID WASTE VEGETABLE OIL INDUSTRY AS A NATURAL ADSORBENT
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractThis paper presents the results of the removal of arsenite and arsenate ions from an aqueous solution using Fenton modified solid waste vegetable oil industry (SWVOI). Several factors (such as pH, contact time and Fe2+/H2O2 ratio, initial arsenic ion concentration and adsorbent concentration) that affect the arsenic ion adsorption on the SWVOI adsorbent material were investigated. The sorption characteristics of the adsorbent material before modification were also studied and compared wi...
Autori: Hoda Amiri, Mehdi Ahmadi, Nemat Jaafarzadeh, Susana Silva Martínez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26290

DESIGN CRITERIA FOR INCREASING BUILDING FLEXIBILITY: DYNAMICS AND PROSPECTS
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractOne of the key issues in building construction is environmental sustainability. Conventional methods of construction do not consider the in-built capacity to adapt over time according to new technical requirements and environmental consequences. Therefore, any change or renovation of the building will result in significant cost and lost use during its lifecycle. Designing flexible buildings for easy change and adaptation will assist the main concept of sustainability by reducing material...
Autori: M. Fauzi M. Zain, Maslina Jamil, Nasibeh Sadafi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26293

MINIMIZATION OF CHEMICAL RISK BY USING RECOVERED ALUMINIUM FROM METALLURGICAL SLAG AS COAGULANT IN WASTEWATER TREATMENT
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractSecondary aluminium production inherently generates significant amounts of slag of variate composition and including dangerous compounds. Consequently, a care treatment of the resulted slag is imperatively necessary for preventing the environment pollution and for recovering valuable materials even if present in low amounts. The aluminium recovering procedure is based on a chemical and hydrometallurgical slag treatment, leading to the technical grade aluminium sulphate (AS), possible to ...
Autori: Carmen Tociu, Cristina Maria, Elena Diacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26295

EVALUATION OF THE ENVIRONMENTAL IMPACT OF ROAD PAVEMENTS FROM A LIFE CYCLE PERSPECTIVE
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractThe road infrastructure has a major environmental impact by covering important land surfaces and consuming enormous amounts of raw materials for construction and maintenance. The impact of transport pavements needs to be considered from the design stage and to be examined during the whole life cycle of the infrastructure: raw materials extraction and initial transformation, manufacturing, placement on site, exploitation, maintenance, and demolition. This paper evaluates the impact of asp...
Autori: Isabela Maria Simion, Laura Dumitrescu, Maria Gavrilescu, , Radu Andrei, Sebastian George Maxineasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26297

BIOREMEDIATION CONTAINING WASTEWATER BY OF P-NITROPHENOL AEROBIC GRANULES
Environmental Engineering and Management JournalVol. 13Nr. 3
AbstractAerobic granulation is a novel biotechnique for the treatment of coloured wastewater containing toxic xenobiotics in sequencingbatch reactor (SBR). The aerobic granules were investigated as a potential biomaterial for biodegradation of p-nitrophenol. Theremoval efficiency of p-nitrophenol was 93 % after 65 days of operation at 8 hr hydraulic retention time (HRT). The aerobicgranules were cultivated at a p-nitrophenol loading rate of 0.9 kg m-3 day-1, with sodium acetate as co-substrate t...
Autori: Pijush Kanti Mondal, Rais Ahmad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26302

INTEGRATED ENVIRONMENTAL PROTECTION AND WASTE MINIMIZATION IN THE AREA OF COPPER MINE BOR, SERBIA
Environmental Engineering and Management JournalVol. 13Nr. 4
AbstractThis paper discusses some environmental problems caused by the mine waste from the Copper Mine Bor in Serbia. The CopperMine Bor and the Smelter generated about 2x109 tones of waste materials, located in the vicinity of the Bor. They cover mining,flotation tailings and smelting slag wastes. The existing mine waste have been formed during a hundred-year-old of mining andmetallurgical activities in Bor. Also, new quantities of wastes (up to ten thousand tones) have been produced daily by u...
Autori: Jovica M. Sokolović, Novica Milosević, Rodoljub D. Stanojlović
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26334

A THIRD-GENERATION OPTICAL FIBRE TRANSDUCER FOR LANDSLIDE MONITORING
Environmental Engineering and Management JournalVol. 13Nr. 4
AbstractMonitoring an unstable slope is quite important for environmental safety. Based on our previous studies, this paper presents athird-generation distributed optical fibre transducer. The operating mechanism of this novel transducer was analysed for itsresponse to a single concentrated and uniform load, and a theoretical study was conducted on the elongation of the bottomsurfacefibres of a bending resistance model at the phases of linear elasticity and total cross-section cut-off stage. A b...
Autori: Bang Liu, Dong-Yan Liu, Hu Luo, Jing-Cheng Liu, Qiao-Ying Yuan, Yun-Ju Luo, Zheng-Wei Zhu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26348

INDUSTRIAL TESTS OF WASTE ROCK DIRECT BACKFILLING UNDERGROUND IN FULLY MECHANIZED COAL MINING FACE
Environmental Engineering and Management JournalVol. 13Nr. 5
AbstractFor efficient, economical and environmentally disposing the waste rock underground, based on principles of waste directbackfilling in fully mechanized coal mining, this paper carries out a field test in 6304-1 working face of Jining No.3 Coal Mine.We first design a waste rock direct underground processing system, including screening-crushing system, transportation system,transfer system, stope backfilling system and coal mining system. Then optimize the waste backfilling and coal miningt...
Autori: Jixiong Zhang, Qiang Zhang, Xu Zhao, Yanli Huang, Zhan Liu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26383

QUALITY ASSURANCE FOR TESTING THE PROTECTIVE PERFORMANCES OF MATERIALS - AN ESSENTIAL PREREQUISITE IN SUBSTANTIATING LABORATORY COMPETENCY
Environmental Engineering and Management JournalVol. 13Nr. 6
AbstractStatic electricity represents one of the potential ignition sources for the explosive atmospheres. The test methods for materials, ingeneral, and especially the test methods for textile fabrics for assessment of the protective performances in static electricity, haveknown a permanent evolution alongside newly developed electrostatically dissipative materials. Within the National Institute ofResearch and Development for Safety in Mines and Explosion Protection (INCD-INSEMEX) new testing s...
Autori: Mihaela Părăian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26405

ANALYSIS OF EXPLOSIVITY PARAMETERS AND ENVIRONMENTAL SAFETY FOR COMBUSTIBLE DUSTS
Environmental Engineering and Management JournalVol. 13Nr. 6
AbstractIn industrial plants many types of combustible dusts are generated, processed, handled and stored. When ignited, they can burnrapidly and with a considerable explosion force, when mixed with air in proper proportions. This is the reason why adequateprecautions have to be adopted, to ensure all equipment is appropriately protected so that the ignition likelihood of the explosiveatmosphere is diminished.Explosion preventing and protection precautions aim to stop explosion occurrence, by el...
Autori: Adrian Jurca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26406

PROCEDURE FOR METAL CUTTING USING EXPLOSIVES, WITH LOW ENVIRONMENTAL IMPACT
Environmental Engineering and Management JournalVol. 13Nr. 6
AbstractResearches aim to develop new knowledge in the metal cutting field, using a relatively new technique with a low number ofapplications nationwide, namely the flexible explosive charge with cumulative effect for fast and precise cutting of metals. Theprocedure of cutting with explosives is a process that involves using and handling materials in their solid phase.This procedure isespecially applied in cases where materials are mostly metals and it uses a directed and controlled cumulative e...
Autori: Ilie Ciprian Jitea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26410

POTENTIAL ENVIRONMENTAL IMPACTS OF GEO-MATERIALS EXPLOITATION IN THE CITY OF KINSHASA, DEMOCRATIC REPUBLIC OF CONGO
Environmental Engineering and Management JournalVol. 13Nr. 7
AbstractThe supply of building materials in the city of Kinshasa is one of the major challenges for sustainable development andespecially at this time when the authorities are committed to rebuild the country and to rehabilitate the basic infrastructure,mobilization and knowledge of these materials appears to be of paramount importance. In this context, the Kinshasa morphologywill change day by day because of the operations of construction materials extraction, to meet the needs of the populatio...
Autori: Holenu Holy Mangenda
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26428

EXPERIMENTAL STUDY OF NOISE LEVELS GENERATED BY ROLLING BEARINGS IN DIFFERENT STAGES OF DETERIORATION
Environmental Engineering and Management JournalVol. 13Nr. 7
AbstractRolling bearings are one of the most commonly mechanical elements used in the construction of dynamic equipment. Thiselement can be considerate as a noise source as a result of relative motion of the components from their construction: rings,rolling elements and cage. The noise level increase with the increase of the roller bearings wear. By analyzing of the rollerbearings wear level, which appear due to the component failure, it can be determine the deterioration stage and their remaini...
Autori: Dumitru-Cristinel Nadabaica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26430

EFFECTS OF REUSING ABRASIVE MATERIAL IN ABRASIVE WATER JET CUTTING ON THE QUALITY OF PROCESSED SURFACES AND ENVIRONMENT
Environmental Engineering and Management JournalVol. 13Nr. 7
AbstractThe aim of the current study is to analyse the effects of reusing the abrasive material, in different rates, on the quality of surfacesprocessed by abrasive water jet cutting (AWJ) and to correlate it with the environmental impact. In view of this, two aluminiumalloys are processed, Al 2024 T3 and Al 6065 T651, respectively, with large applicability in the aeronautic and machine buildingindustries. It was found that for reusing rates of the abrasive material higher than 60%, a better qua...
Autori: Carol Schnakovszky
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26438

STUDIES ON DUCTILE - BRITTLE TRANSITION FOR CARBON DIOXIDE PIPELINES
Environmental Engineering and Management JournalVol. 13Nr. 7
AbstractIn order to diminish the climat changes due to greenhouse gases, the capture from the source, transport and storage of carbondioxide is one of the environmental priorities of the EU until 2050. Transportation of this gas through pipelines (one of thesolutions with most advantages in transport) can be done at ambient temperature only at high pressures, so the carbon dioxide toremain in the supercritical state. In case of underground pipelines, there is a risk of cracking at the wall of th...
Autori: Valentin Zichil
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26447

NEW TECHNOLOGIES - BETWEEN BUSINESS AND ENVIRONMENTAL PROTECTION IN ROMANIA
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractRomania has implemented the most generous program of renewable energy development from the entire European Union. Thiswork studies the implications of the accelerated development of renewable energy and especially wind energy. Because of theinstability of this energy, the need to resort to more than what was recommended for the classic energy was inevitable. That iswhy the favorable impact on the environment was below expectations. Also, important unfavorable economic effects haveemerged...
Autori: Eugenia Grecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26458

COMPARATIVE ANALYSIS OF TECHNOLOGICAL AND NATECH RISK FOR TWO PETROLEUM PRODUCT TANKS LOCATED IN SEISMIC AREA
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractThe failure of process equipment due to the impact of natural hazards, the so-called Natech events, have generated severalindustrial accidents, such as Fukushima, Japan - 2011, Ichihara, Japan - 2011, Tupras, Turkey - 1999, Northridge, US - 1994 etc.,causing the release of large quantities of hazardous materials in the environment. Earthquakes occupy a leading position in thelist of natural hazards with Natech potential, causing serious damage and the loss of containment in process equip...
Autori: Augusta Diana Gheorghiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26460

RECOVERY OF WASTE GAS BY COMBUSTION IN AN ORIGINALLY DESIGNED PLANT
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractThis work presents an original method and an automated installation to recover by combustion the waste gas obtained in theignition process of xylites in rotary kiln. The flue gas resulting from the combustion of waste gas, with light fuel support areused in the technological processes of obtaining activated carbon, satisfying the conditions where the oxygen content does notexceed 0.3 % vol. and the temperature is above 1200°C, conditions imposed by the Project Manager of the European pro...
Autori: Aurel Gaba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26461

SUSTAINABLE USE OF RECOVERED PAPER IN THE ROMANIAN PAPER INDUSTRY. PART II – ENVIRONMENTAL IMPACT
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractIn the last decades, the surface of Romanian forests decreased due to an intensive harvesting and, as a consequence, the price ofpulpwood significantly increased. In the same time, the regulations for environmental protection were successively hardened inRomania, so that all chemical pulp mills were closed for economic and environmental reasons. In these circumstances, Romanianpaper producers shifted to recovered paper as raw material. This decision is in accordance with trends of Europe...
Autori: Adrian Cătălin Puiţel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26462

NEW APPROACHES IN THE DESIGN OF PLASTIC PRODUCTS FOR EASY RECYCLING
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractThe researches were initiated in the context emphasized by the competition having the idea of profit at its base, and sustainabledevelopment, which imposes limitations through different regulations and standards which would involve supplementary costs.The research highlights the main trends in plastic product design in conditions of sustainable development of society. Plasticshave an important role in the configuration of the new products just in the phase of conception. Having in mind t...
Autori: Petrica Corabieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26472

SILICA IMPREGNATED WITH CYPHOS IL-101 FOR Cs+ ADSORPTION
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractA series of experiments were performed to quantify the adsorption of Cesium on Silica impregnated withtrihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101). Non-radioactive cesium solution was used as a surrogate of theradioactive 137Cs. The obtained impregnated Silica with the studied ionic liquid was characterized through scanning electronmicroscopy, energy dispersive X-ray analysis and Fourier transform infrared spectroscopy in order to put in evidence that theimpregnation with the...
Autori: Adina Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26473

EFFECTIVENESS OF AIR TREATMENT USING A PLATE-TYPE BIOFILTER WITH A CAPILLARY SYSTEM FOR HUMIDIFICATION OF PACKING MATERIAL
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractIn this study a new generation of plate-type laboratory air treatment biofilter is applied for the removal of gaseous contaminantsfrom air. The packing material for the biofilter consists of porous plates arranged vertically one after the other to produce acapillary humidification effect. The porous plate is made of polymer to secure the stiffness of the plate. Birch fibre granulesthermally treated in a steam explosion reactor are fixed on both sides of the polymer board. The granules ar...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26480

REMOVING TOXIC COMPOUNDS FROM WASTEWATER
Environmental Engineering and Management JournalVol. 13Nr. 9
AbstractThe paper presents a hybrid method for the advanced removal of low biodegradable organic compounds from water, bycombining the separation selectivity of the membrane with the oxidation efficiency of the photocatalytic process. The aim of thisstudy is to evaluate the performance of the hybrid method to remove toxic compounds from wastewater. The advanced oxidationprocess, based on a photocatalytic reactor with continuous recirculation, ultraviolet (UV) radiations and a membrane, was usedf...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26490

TOOLS FOR ASSESSING DANUBE DELTA SYSTEMS WITH MACRO INVERTEBRATES
Environmental Engineering and Management JournalVol. 13Nr. 9
AbstractThis study, analyzes the benthic macroinvertebrates community structure and composition in order to assess the ecological statusas required by the Water Framework Directive (WFD). Macroinvertebrates are the appropriate indicators to describe habitatheterogenity and the water bodies ecological status by turning the allochtone material into biomass, which is then transferred tothe upper trophic levels. Moreover, the macroinvertebrates have the capacity to integrate in their structure the e...
Autori: Catalina Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26502

SIMULTANEOUS ARSENIC (III) AND LEAD (II) DETECTION FROM AQUEOUS SOLUTION BY ANODIC STRIPPING SQUARE-WAVE VOLTAMMETRY
Environmental Engineering and Management JournalVol. 13Nr. 9
AbstractNano-Ag electrodeposited on carbon nanotubes-epoxy and carbon nanofibers-epoxy composites electrode materials as Ag-CNTand Ag-CNF electrodes were tested for simultaneous detection of arsenic (III) and lead (II) from aqueous solution. Theelectrochemical behaviour of As(III) and Pb(II) on both composite electrode offered useful detection information and Ag-CNFexhibited better electroanalytical performance. The detection scheme using Ag-CNF for simultaneous detection of As(III) andPb(II) wa...
Autori: Anamaria Baciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26511

ENVIRONMENTAL IMPACT ASSESSMENT AND THERMAL PERFORMANCES OF MODERN EARTH SHELTERED HOUSES
Environmental Engineering and Management JournalVol. 13Nr. 9
AbstractThe impact of modern structures on the environment during the building process and actual life-cycle becomes more and more ofa problem and needs to be minimized using unconventional architectural and building solutions, materials and overallacknowledgement of the whole concept.This study has the task of determining the feasibility of a modern earth sheltered house solution by comparing its thermalperformances and environmental impact to a conventional above-ground building solution. Alth...
Autori: Horia Tundrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26517

SECONDARY MUNICIPAL EFFLUENT TREATMENT BY CATALYTIC WET HYDROGEN PEROXIDE OXIDATION
Environmental Engineering and Management JournalVol. 13Nr. 9
AbstractWater recycling and reuse, answering the needs of creating cleaner water resources, need to be closely related with water resourcemanagement and technologies. Current municipal wastewater treatment plants are capable to control conventional pollutants(carbonaceous compounds, particulate matter, nutrients). Priority organic compounds, like polyaromatic hydrocarbons,polychlorinated biphenyls, endocrine disrupting chemicals, personal care products, pesticides etc., may escape the treatment ...
Autori: Andreea Chelba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26521

ANALYSIS OF PRIMARY ENERGY USE OF TYPICAL BUILDINGS IN HUNGARY
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractThe building stock in Eastern European countries varies greatly in terms of the thermal properties of the materials used. Duringrecent decades, the requirements related to building energy performance have been changed. Nevertheless, the number of newlybuilt buildings has decreased in recent years, so there are few buildings that fulfill the strictest requirements that were recentlyintroduced. Several national programs have been started to help owners improve the energy use of their build...
Autori: Béla Bodó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26529

INVESTIGATION OF THE EFFECT OF MOISTURE IN THE TIME LAG OF BUILDING WALLS WITH DIFFERENT INSULATING MATERIALS
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractThe thermal and water insulation of buildings is extremely important. Currently, the most applied insulation materials in thebuilding sector are plastic foams and fibrous materials. Different types of polystyrene materials are used as water and thermalinsulators, e.g., expanded polystyrene (EPS) and extruded polystyrene (XPS). The differences between the different polystyrenematerials is found in their manufacturing processes and thus in their microstructure. Our research focuses on the ...
Autori: Ákos Lakatos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26546

THE CARBON FOOTPRINT OF A BIOGAS POWER PLANT
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractIn our study, we examined the annual carbon footprint and energy balance of a Hungarian biogas power plant with a poweroutput of 0.637 MW in 2013, with reference to the complete life cycle of the biogas production. The life cycle analysis (LCA)considered the emissions of greenhouse gases (GHG) during the production of feedstock and its transportation into the powerplant, during the operation of the factory and during the process of rendering the discarded waste materials harmless. Weesta...
Autori: György Szabó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26548

TESTING ALGORITHMS FOR THE IDENTIFICATION OF ASBESTOS ROOFING BASED ON HYPERSPECTRAL DATA
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractThere are several environmental issues in urban areas that are caused by the unintentional consequences of past activities. One ofthese issues is the wide application of asbestos cement in roofing materials in the 2nd half of the 1900s. In this study, our goal wasto identify different roof types and to determine those with asbestos components using high-ground (1 m) and spectral (126bands) resolution airborne hyperspectral imagery (AISA Eagle II) and several classification approaches. In...
Autori: Szilárd Szabó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26549

MEASUREMENTS OF THE THERMAL CONDUCTIVITIES OF SOME COMMONLY USED INSULATING MATERIALS AFTER WETTING
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractCurrently, thermal insulation of buildings is required from both an energy savings perspective and a money savings perspective.Insulation is primarily installed on the outer surface of the buildings. Weather and other circumstances can produce humidity thatcan act on the building structure, e.g., by changing its heat capacity, the heat transfer coefficient and/or other factors. As a result,it is important to measure the sorption behaviors of the construction materials. To perform sorptio...
Autori: Ferenc Szodrai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26550

REMOVAL OF CADMIUM (II) FROM AQUEOUS MEDIA USING COOH/TUD-1 MESOPOROUS SOLID. KINETIC AND THERMODYNAMIC STUDIES
Environmental Engineering and Management JournalVol. 13Nr. 10
AbstractThe adsorption potential of 10 wt.% COOH/TUD-1 material for removing Cd2+ from aqueous solutions was investigated via thebatch technique, and the effects of pH, temperature and contact time were studied. Experimental data showed that the maximumCd2+ adsorption, 90%, occurred at pH 6. The adsorption equilibrium was reached within 35 min for 10 wt.% COOH/TUD-1. Theadsorption mechanism was investigated in terms of its thermodynamics and kinetics. The adsorption data were fitted using theLan...
Autori: Nabila Bensacia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26558

STUDY OF A ROAD TEST TRACK WITH AND WITHOUT CRUMB RUBBER. SOLUTIONS FOR NOISE POLLUTION
Environmental Engineering and Management JournalVol. 13Nr. 10
AbstractEnd-of-life tires are waste materials that pollute landscapes when they are disposed of in tire dumps. However, its life cycle is notfinished when they are scrapped. The rubber of end-of-life tires could be used for new purposes as construction material in roadrehabilitation. A gap-graded mix characterization was carried out in this work by means of laboratory and field performancetests. The mixture has a high content of crumb rubber (CR) by weight of bitumen. Crumb Rubber was added to t...
Autori: Victor F. Vázquez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26577

COATING FERTILIZER GRANULES WITH BIODEGRADABLE MATERIALS FOR CONTROLLED FERTILIZER RELEASE
Environmental Engineering and Management JournalVol. 13Nr. 10
Abstract Biodegradable chitosan was used to cover fertilizer granules with an inert, impermeable layer in order to obtain a material with controlled release properties. The process was performed in a laboratory drum granulator. Prepared materials were characterized with available analytical methods (XRD, optical microscopy). The layer thickness of the obtained materials was in the range of 0.047 – 0.5425 mm. The degree of nutrients' release (0.64-0.965 within five hours) were deter...
Autori: Krzysztof Lubkowski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26583

APPLICATION OF ECODESIGN METHODOLOGY IN SMEs RUN ACCORDING TO LEAN MANAGEMENT: THE CASE OF A FURNITURE PUBLISHING COMPANY
Environmental Engineering and Management JournalVol. 13Nr. 12
Abstract The aim of this paper is the adaptation of an Ecodesign methodology for product publishing SMEs that have implemented Lean Management. To obtain verification of this methodology, an eco-redesign case study of a product has been carried out from a furniture publishing SME which applies lean management to its entire production chain. Some proposed improvements resulting from this case study were: Design for dismantling, Multifunction, Dematerialisation, Increasing the material of rene...
Autori: Sara González-García
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26592

POTENTIAL USE OF Crambe abyssinica PRESS CAKE AS AN ADSORBENT: BATCH AND CONTINUOUS STUDIES
Environmental Engineering and Management JournalVol. 13Nr. 12
Abstract This study evaluates the potential of Crambe abyssinica press cake, a residue from crambe oil extraction and/or biodiesel production, as an adsorbent for removal of cationic dyes from wastewaters. Batch adsorption tests were performed at 30, 40 and 50oC. Adsorption kinetics and equilibrium were satisfactorily described by the pseudo second-order and Freundlich models, respectively. Adsorption was spontaneous and exothermic. Fixed bed adsorption (breakthrough curve) was satisfactoril...
Autori: Adriana S. Franca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26597

ANALYSIS OF THE UTILIZATION OF WASTE CATALYSTS FROM CATALYTIC CRACKING REACTORS IN OIL INDUSTRY
Environmental Engineering and Management JournalVol. 13Nr. 12
Abstract This article covers the investigation of the catalyst waste (T.R.M 1 and T.R.M 2) produced in the reactor of oil catalytic cracking. The analysis of this waste was carried out. The properties of T.R.M 1 and T.R.M 2 were investigated and determined, the mineralogical analysis of catalyst waste was implemented, the analysis of thermal effects during the burning was performed. Catalyst waste materials investigated were used in a ceramic system (from 7  to 20  of the ove...
Autori: Olga Kizinievič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26600

CATHOLYTE-CONDITIONING ENHANCED ELECTROKINETIC REMEDIATION OF Co- AND Pb- POLLUTED SOIL
Environmental Engineering and Management JournalVol. 14Nr. 1
Abstract The feasibility of catholyte-conditioning to enhance the electrokinetic (EK) remediation of cobalt and lead polluted soil has been investigated in this study. Electrokinetic experiments were conducted using an EK cell 10 cm in width, 10 cm in height, and 50 cm in length. Plate type electrode of graphite was used as electrode material. Two experiments were conducted under constant voltage condition (2 V/cm). The pH values of the soil significantly affect the removal of Co and Pb ions...
Autori: Mahdi Bahemmat
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26623

ADSORPTION PROPERTIES OF ACTIVATED CARBON FROM WILD PLANT PREPARED BY CHEMICAL ACTIVATION
Environmental Engineering and Management JournalVol. 14Nr. 1
Abstract Activated carbon was prepared from renewable plant material, that is Euphorbia rigida, by chemical activation using zinc chloride as activating reagents. The adsorption of Basic Blue 9 (BB9) onto activated carbon was investigated in a batch system with respect to contact time, pH and temperature from aqueous solutions. The experimental data indicated that the adsorption isotherms are well described by the Langmuir isotherm model and the calculated maximum adsorption capacity of acti...
Autori: Özgül Gerçel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26627

PRODUCT ECODESIGN IN COMPANIES WITH ISO 14001 CERTIFIED ENVIRONMENTAL MANAGEMENT SYSTEM
Environmental Engineering and Management JournalVol. 14Nr. 1
Abstract Product eco-innovation based on ecodesign principles is based on the idea of including the environmental aspects of a product over its entire life-cycle, thus providing the opportunity for manufacturing companies to intervene earlier during product development processes. The aim of this study was to gather information and evaluate the situation regarding ecodesign within the ISO 14001 certified medium and large manufacturing companies in the Republic of Slovenia by means of a questi...
Autori: Gregor Radonjič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26630

RESEARCH AND TRENDS IN PRODUCT LIFE CYCLE MANAGEMENT IN THE CONTEXT OF SUSTAINABLE DEVELOPMENT
Environmental Engineering and Management JournalVol. 14Nr. 1
Abstract During the creation of a product, the majority of the enterprises still apply a linear approach. This approach has been imposed by the organization way of the company and by the informational flow between the different departments. In the present time different models of integrated engineering oppose to the sequential organization. These models permit the simultaneity of the activities deploying or at least their partial overlap. The activities overlap can be imagined eliminating fi...
Autori: Petrică Corăbieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26633

DEVELOPMENT AND OPTIMIZATION OF WATER BASED PAINT FORMULA IN ORDER TO REDUCE VOCs EMISSIONS
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract The interest in waterborne paints amelioration increased lately due to the toxicological effect of certain ingredients on human health, the restrictive environmental legislation and the depletion and escalation in price of raw materials. Research efforts in formulating waterborne paints are directed to insure low volatile organic compounds (VOCs) emission while maintaining and even improving their properties. This paper presents a waterborne paint formulation process. The required ...
Autori: Andrei Ionut Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26639

COPPER NANOPARTICLES SUPPORTED ON POLYETHERFUNCTIONALIZED MESOPOROUS SILICA. SYNTHESIS AND APPLICATION AS HYDROGENATION CATALYSTS
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract Copper nanoparticles were successfully synthesized on polyether-functionalized mesoporous silica to investigate the effect of metal loading (10, 25 and 35 wt. % Cu) on their structural and catalytic properties. The oxide forms of these nanocomposite materials were thoroughly characterized by nitrogen physisorption, SAXS, WAXS, TEM, EDXS, and TPR, whereas the metallic forms were analysed by N2O chemisorption. The results indicated that the mesostructured SBA-15-like hybrids favoured ...
Autori: Constantin Rudolf
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26653

COMPARATIVE STUDY OF PREHYDROLYSIS METHODS FOR VEGETAL MATERIALS
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract This paper presents the results obtained using the prehydrolysis treatments of rapeseed stalks depending on regime and the catalyst. The vegetal materials were subjected under different temperature conditions and then characterized for the yield reducing substances. The differences between samples have been established by using FTIR and depend on the successive hydrolytic treatments of dynamic and static regime in the presence of various catalysts. The experimental data show that th...
Autori: Corina Măluţan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26654

STUDIES ON THE PHOTOCATALYTIC DEGRADATION OF ORGANIC DYES USING CeO2 - ZnO MIXED OXIDES
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract A new catalytic mixture of nanosized dioxide (CeO2) and zinc oxide (ZnO) powders have been synthesized by surfactant-assisted solvo-thermal route, characterized and evaluated for photocatalytic activity. The prepared catalysts were characterized by TG, XRD, SEM and EDAX methods. SEM analysis showed that the catalyst particles have spheroidal shape and their sizes range from 50 to 80 nm, organised as uniform distributed aggregates with large surface area, leading to the existence of ...
Autori: Gabriela Antoaneta Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26655

ION EXCHANGE PROCESSES ON WEAK ACID RESINS FOR WASTEWATER CONTAINING COOPER IONS TREATMENT
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract The capacity of ion exchange resins, MN 500 and C100 H, for the removal of copper ions from aqueous solution has been investigated under different conditions, namely: initial solution pH, initial metal-ion concentration and contact time. The adsorption of Cu(II) on these resins follows the first-order reversible kinetic. The film diffusion of Cu (II) in these ion exchange resins was shown to be the main rate limiting step. The studies showed that these cation exchange resins can be ...
Autori: Cristina Modrogan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26658

PORE STRUCTURE CHARACTERIZATION OF CHEMICALLY MODIFIED BIOCHAR DERIVED FROM RICE STRAW
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract Biochar derived from agricultural biomass waste is increasingly recognized as multifunctional material for various applications according its characteristics. It is therefore essential to investigate biochar properties before large-scale application. In this study, rice straw-derived biochars produced at different temperature (550, 650, 750 oC). The resulting biochars were subjected to liquidphase oxidation by different agents including KOH, HNO3, H2SO4, H2O2 and KMnO4 to obtain bio...
Autori: Sobhy M. Yakout
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26661

HEALTH RISK ASSESSMENT OF HEAVY METALS AND POLYCYCLIC AROMATIC HYDROCARBONS IN SOIL AT COKE OVEN GAS PLANTS
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract Sites contaminated with hazardous materials pose serious risks to human health and ecological environments. Quantitative health risk assessment is a site-specific complex procedure requiring evaluation of all possible pathways. Several studies have focused on the evaluation of heavy metals or organic pollutants; however, only few studies focused on the evaluation of diverse pollutants such as heavy metals and organics. In this study, the health risk of heavy metals and organic pollu...
Autori: Hou Wei
ISSN: 1
http://www.ecozone.ro/reviste.php?RID=26663

ADSORPTION EQUILIBRIUM AND EFFECTIVE DIFFUSIVITY IN CYLINDRICAL ALUMINA PARTICLES IMPREGNATED WITH CALCIUM CHLORIDE
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract Adsorption equilibrium and effective diffusion coefficients of water vapor, in cylindrical particles of activated alumina (A) and activated alumina impregnated with calcium chloride (MCA), are experimentally determined. The experiments were conducted at 303 K and 323 K using cylindrical particles with 2.5 mm in both length and diameter. Diffusion coefficients were determined from the kinetics of water sorption. The measurements were conducted in a constant pressure unit based on a m...
Autori: Eugenia Teodora Iacob Tudose
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26665

DESIGN AND PERFORMANCE EVALUATION OF A PLANT FOR GLYCEROL CONVERSION TO ACROLEIN
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract The development of biodiesel industry in the recent past brought into discussion the valorization of glycerol as the byproduct of this technology. Dehydration of glycerol leads to acrolein, mainly used as a raw material in the production of acrylic acid and its esters. Several research efforts dealing with the synthesis of acrolein from glycerol are reported in the literature. However, they are limited to catalyst testing on laboratory scale, no attention being paid to the process f...
Autori: Ionut Banu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26666

INFLUENCE OF NANOPOROUS MATERIALS ON THE CHEMICAL COMPOSITION OF MERLOT AND CABERNET SAUVIGNON WINES
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract The variation of the content of 12 phenolic compounds from 5 months aged Cabernet Sauvignon and Merlot wine samples treated with siliceous and aluminosiliceous porous materials was analysed through a HPLC method. The standard physical-chemical analyses (alcoholic concentration, total acidity, volatile acidity, relative density, reductive sugars, total dry extract, non-reductive extract, free SO2, total SO2, pH) were registered. The used nanomaterials: SBA-15, Al-MCM-41, KIT-6 were s...
Autori: Camelia Elena Luchian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26667

CELLULOSE CELLETS AS NEW TYPE OF ADSORBENT FOR THE REMOVAL OF DYES FROM AQUEOUS MEDIA
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract In the current study, the structural and adsorptive properties of the micro crystalline cellulose beads, Cellets 200 and 350, as well as the possibility to use them as adsorbents for removal of reactive dye Brilliant Red HE-3B and cationic dye Methylene Blue from aqueous solutions have been investigated. Batch experiments were conducted to study the effect of adsorbent particles size (200-500 μm), initial solution pH (1-11), adsorbent dose, dye concentration, temperature (2-450C)...
Autori: Daniela Suteu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26668

ADSORPTION OF ENDOCRINE DISRUPTORS ON EXFOLIATED GRAPHENE NANOPLATELETS
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract Drinking water treatment using activated carbon (AC) decontamination offers effective methods for removing some organic compounds, tastes and odors, but it is not so efficient for metals, nitrates, microbial contaminants and other organic and inorganic contaminants. In the last years, nanotechnologies introduced several types of nanomaterials for organic, inorganic and biological removal of contaminants in drinking water, such as: sorption, filtrations and catalytic processes. In th...
Autori: Elena Radu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26671

EVOLUTION OF TROPHIC PARAMETERS FROM AMARA LAKE
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract The transformation of lentic ecosystems in other types of ecosystems (plain, forest) is a part of normal process of ecological succession that occurs slowly, at geological scale. The filling of cuvette with eroded material transported by precipitations, air masses or detritus produced in situ, start from the moment when the body of water lakes is formed and has different rates depending on many factors: geographical location, geological substrate type, types of existing uses in the ...
Autori: Ofelia Axinte
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26672

A NEW STRATEGY FOR PENTACHLOROPHENOL MONITORING IN WATER SAMPLES USING ULTRA-HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY TANDEM
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract A novel sensitive and rapid analytical approach based on ultra-high performance liquid chromatography - mass spectrometry (UHPLC/MS/MS) tandem was developed for the monitoring of pentachlorophenol in water samples. Chromatographic separation was carried out on Acquity BEH C18 (100 x 2.1 mm, 1.7 μm) column under gradient mode using a mobile phase consisting of acetonitrile/ultrapure water/formic acid. Quantification of pentachlorophenol was performed on a triple-quadrupole tandem ...
Autori: Yassine Kadmi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26673

MAGNETIC CONTAMINATION OF ENVIRONMENT – LABORATORY SIMULATION OF MIXED IRON OXIDES IMPACT ON MICROORGANISM CELLS
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract Magnetic contamination is considered more and more as a challenging issue related to biosphere pollution with magnetic materials originating in natural and artificial sources (volcanic eruptions and respectively industrial activities that contributed to iron and other metal compounds spreading in air, water and soil). Aiming to study the impact of magnetic metal ions such as iron and cobalt on the metabolism of some environmental microorganisms, in this paper an experimental simulat...
Autori: Lacramioara Oprica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26675

GREEN SYNTHESIS AND CHARACTERIZATION OF GOLD NANOPARTICLES OBTAINED BY A DIRECT REDUCTION METHOD AND THEIR FRACTAL DIMENSION
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract Nanoparticles are very interesting materials due to their properties which can be different than those of the bulk and they have many applications in various domains, like electronic, catalytic or biomedical. Gold is one of the most studied materials and is used in many applications that will have the human being as recipient, that’s why gold nanoparticles should be obtained as environmentally friendly as possible. In this work, particles of around 50 nm were obtained in a so ...
Autori: Razvan State
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26676

PNiPAM-FUNCTIONALIZED MESOPOROUS CARBON FOR THE ADSORPTION OF VITAMIN B2
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract The present research reports the synthesis of poly-N-isopropylacrylamide / mesoporous carbon composites, prepared by radical polymerization of N-isopropylacrylamide inside mesoporous carbon pores functionalized with carboxylic groups. The deposition of poly-N-isopropylacrylamide on mesoporous carbon was confirmed by FT-IR spectroscopy, TEM, N2-sorption measurements. The mesoporous carbon material was found to adsorb vitamin B2 from aqueous solution at room temperature. The obtained ...
Autori: Maria Ignat
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26679

IMPACT OF URBANIZATION ON URBAN HEAT ISLAND EFFECT BASED ON TM IMAGERY IN WUHAN, CHINA
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract As natural landscapes are increasingly replaced by impervious surface materials associated with urbanization, urban areas tend to experience higher surface temperatures when compared to rural areas, which is known as the urban heat island (UHI) effect. In this study the impact of urbanization on land surface temperature (LST) and the UHI effect were examined based on two Landsat Thematic Mapper (TM) imageries of 1987 and 2007. Results show that Wuhan experienced rapid urban expansio...
Autori: Qijiao Xie
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26684

CHALLENGES AND OPORTUNITIES IN GREEN PLASTICS: AN ASSESSMENT USING THE ELECTRE DECISION-AID METHOD
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract Bioplastics are biobased materials, usually easy biodegradable, derived from renewable resources. Evolution of bioplastics production is related to: bio starch and starch mixtures (74.5%); bioplastic products from fermentation (13%), bioplastic from petrochemicals materials (12.5%). They are seen as a viable solution to avoid some environmental impacts caused by the use of fossil-based conventional plastics. In this context, the general objectives of this study entail the analysis a...
Autori: Elena-Diana Comaniţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26688

FACILE SYNTHESIS OF BISMUTH OXIDE NANOPARTICLES BY A HYDROLYSIS SOLVOTHERMAL ROUTE AND THEIR VISIBLE LIGHT PHOTOCATALYTIC ACTIVITY
Environmental Engineering and Management JournalVol. 14Nr. 3
Abstract The bismuth oxide (Bi2O3) nanoparticles are easily synthesized from a solution of bismuth nitrate pentahydrate (Bi(NO3)3·5H2O) in ethylene glycol by a hydrolysis solvothermal route at temperatures of 120-150C. X-ray diffraction, scanning electron microscopy and UV-visible diffuse reflectance spectroscopy are used to characterize the products. The results show that the reaction temperature, the reaction duration and the initial solution concentration play important rol...
Autori: Xiaowen Luan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26689

BIODEGRADATION OF ATRAZINE BY FREE AND IMMOBILIZED CELLS OF Arthrobacter sp. STRAIN DNS10
Environmental Engineering and Management JournalVol. 14Nr. 4
Abstract The main purpose of this research was to study the biodegradation ability of atrazine by using Arthrobacter sp. as free and immobilized cells of the strain DNS10, under several important environmental factors such as temperature, pH, salinity, substrate concentration. Furthermore, this paper objective was also to assess the process considering the immobilization under extreme conditions, such as high salinity and high atrazine concentration. DNS10 was immobilized on a sodium alginat...
Autori: Zhang Ying
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26702

SYNTHESIS AND BIOEVALUATION OF MAGNETIC PARTICLES BASED ON CHITOSAN AND PHYTOCOMPONENTS FROM Eugenia carryophyllata AQUEOUS EXTRACT
Environmental Engineering and Management JournalVol. 14Nr. 4
Abstract In this study we report the preparation and evaluation of the antimicrobial activity of a new hybrid material based on chitosan (CH), magnetite (Fe3O4) and phytocomponents from the Eugenia carryophyllata aqueous extract (AE). CH/Fe3O4 was prepared by chemical precipitation of Fe2+ and Fe3+ ions in aqueous solution of sodium hydroxide and CH. E. carryophyllata’s dried buds were hydrodistilled under microwave conditions. The AE was separated in three equal parts, one for the chl...
Autori: Ion Anghel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26707

APPLICATION OF Mangifera indica SEED SHELL FOR EFFECTIVE ADSORPTION OF Fe(II) AND Mn(II) FROM AQUEOUS SOLUTION
Environmental Engineering and Management JournalVol. 14Nr. 4
Abstract Adsorption has proved to be an excellent way to treat industrial wastewater, due to its significant advantages like easy availability, inexpensive, ease of operation and highly efficient, compared to conventional expensive adsorbents like activated charcoal, alumina etc. The present investigation focused on utilization of Mangifera indica seed shell substrate for the removal of toxic heavy metals like Fe(II) and Mn(II) from wastewater. Mangifera indica seed shell substrate as an eff...
Autori: Tikaram D. Kose
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26713

RESONANT TECHNIQUES AS NON-DESTRUCTIVE TECHNIQUES (NDT) APPLIED TO COMPOSITE MATERIALS: CASE STUDY ON LOW VELOCITY IMPACTS DETECTION
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract Impact damage is considered the primary cause of in-service delamination in composite materials and promotes significant reduction in residual strength. Non-destructive techniques (NDT) include several methods able to detect the shape and the size of the interior damages without destruction of the structure or component, which is economically advantageous. The aim of this paper is to evaluate the properties after low velocity impacts using an experimental-numerical procedure based o...
Autori: Ana Martins Amaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26726

ADSORPTIVE REMOVAL OF PHOSPHATE FROM AQUEOUS SOLUTIONS BY WASTE SNAIL AND CLAM SHELLS
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract Large quantities of snail and clam shells are left as waste material when their meat is used as food for people. It has been a big problem that how to treat these wastes and usually these are land filled as wastes. In the present paper, these shells are studied as recycling resource for phosphate removal from solutions. Laboratory-scale batch experiments were conducted to evaluate the efficiency of snail and clam shells in removing phosphate from aqueous solutions. Major factors inv...
Autori: Ji Bing Xiong
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26727

CHARACTERISTIC OF ROAD DEPOSITED SEDIMENTS ON THE HIGHWAY OF HUNAN, CHINA
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract This paper aims to analyze the characteristic of Road deposited sediment (RDS) using West Chang Tan highway, Hunan, China as a study site. RDS samples were collected at five representative highway sites and the particle size distribution was generally less than 150μm. Particles with the grain size (<150μm) had high metal concentrations among all sampling sites (unit: mg/kg): Cu 74-178, Zn 309-2737, Pb 601-1160, Cd 9.8-44.5. There is significant spatial variability between t...
Autori: Yunbo Zhai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26728

DETERMINATION OF EQUILIBRIUM, KINETIC AND THERMODYNAMIC PARAMETERS OF ACID RED 88 ADSORPTION ONTO MONTMORILLONITIC CLAY
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract The aim of this study is to evaluate adsorption kinetics, isotherms and thermodynamic parameters of anionic textile dye (Acid Red 88) onto montmorillonitic clay from aqueous solutions. The parameters of pH, initial dye concentrations, temperature, and the adsorbent dosage were investigated experimentally. Four kinetic models including pseudo-second order, pseudo-nth order, Bangham’s equation and double exponential equation (DEE) were selected to follow the adsorption process. ...
Autori: Sedef Dikmen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26731

SOCIAL PERCEPTION OF PASSIVE POLLUTION BY ASBESTOS IN DARABANI TOWN, BOTOŞANI COUNTY, ROMANIA
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract Social perception is a tool widely used in the environment research, due to the emphasis put on the one hand on the human component, as an important factor in the development of society, and on the other hand on the man-environment interaction of the past decades. The aim of the present study is to assess the population concern about the environment, and particularly about the use of asbestos (a material partly forbidden in Romania since 2007), for construction purposes. The case st...
Autori: Elena Matei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26734

LIFE CYCLE THINKING IN SUSTAINABLE SUPPLY CHAINS: THE CASE OF RUBBERIZED ASPHALT PAVEMENT
Environmental Engineering and Management JournalVol. 14Nr. 5
`Abstract End of life tires require sound accounting of environmental performances to design sustainable procedures for material recovery. Their use in rubber modified asphalt provides could lead to the improvement of technical and environmental performances of asphalt roads, but the effectiveness of simplified procedures is to be proved. During LIFE+ project ROADTIRE, a rubber modified asphalt road prototype, with the upper surface layer containing 10% crumb rubber in the bituminous binder,...
Autori: Irene Bartolozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26741

A NEW KINETIC AND THERMODYNAMIC APPROACH TO PHENOL BIOSORPTION BY CHITOSAN AND KERATIN
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract Chitosan and keratin were tested as low cost biosorbents to remove phenol from water solutions at variable temperature (20- 50°C), initial phenol concentration (10-90 mg L-1) and pH (5.0-10.0), and fixed biosorbent dosage (10 g L-1). The pseudo-second order kinetic model exhibited the best fit to the experimental data and allowed estimating theoretical values of sorption capacity of 4.51 mg g-1 with keratin and 2.87 mg g-1 with chitosan. Equilibrium isotherms, described at best ...
Autori: Attilio Converti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26743

COMPARATIVE CHARACTERISTICS OF SOME POLYMERIC MATERIALS IMPREGNATED WITH IONIC LIQUID FOR THE REMOVAL OF RADIONUCLIDES
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract In order to remove various radionuclides (Tl+, Sr2+and La3+) from wastewaters we used three solid supports of (styrenedivinylbenzene) grafted with different pendant groups (1-triphenylphosphonium; 2-izo-propylphosphonate; 3- aminoethylaminomethyl). The solid supports with different pendant groups were impregnated with ionic liquid (Cyphos IL-101- trihexyltetradecylphosphonium chloride). IR-spectra, EDX-ray and SEM image were used to characterize the adsorbent obtained after the imp...
Autori: Mihaela Ciopec
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26749

MICROBIAL SAFETY OF PLASTIC MATERIALS OBTAINED FROM WASTES
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

CO2 AND ENERGY FOOTPRINT OF DIFFERENT RETAINING WALLS SOLUTIONS. MASONRY RETAINING WALL vs. CANTILEVER RETAINING WALL
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract The paper presents the most economical and less polluting retaining wall system, calculated for the same site, having few different common heights used in design. The paper will highlight the importance of an environmentally friendly solution, but also the most economical solution, which should be the main criteria in the design. Two of the tools used in environmental life cycle assessments (LCA) are the carbon footprint and the energy footprint. The quantification of the carbon and...
Autori: Vasile Farcas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26753

ECOLOGICAL EVALUATION OF AN OPTIMISED WASTE COLLECTION SYSTEM – CASE STUDY IN A GERMAN COMMUNITY
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract Waste management does not try to dispose waste anymore but is searching for the best solution to manage valuable and scarce resources and reduce the negative impact on the environment. Preoccupation in Germany with regard to optimization of waste recuperation and valorization increases and separate collection systems for different waste fractions are taken into consideration. Within this study a pilot project was set up and its results are presented below. The investigation evaluate...
Autori: Mihaela Berechet
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26758

THE EXPERIENCE OF THE FIRST INDUSTRIAL SYMBIOSIS PLATFORM IN ITALY
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract This paper reports the activity, promoted by the Italian agency for new technologies, energy and sustainable economic development (ENEA), in the framework of the project for the development and implementation of the first Italian Platform for Industrial Symbiosis implemented in Sicily (2011-2015). The goals of the project were: to provide a methodology and an instrument for industrial symbiosis implementation at regional scale, to implement a IS Platform as a support to SMEs to ind...
Autori: Laura Cutaia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26774

INVESTIGATION OF STRESS - STRAIN BEHAVIOUR OF RECYCLED AGGREGATE CONCRETE UNDER CYCLIC LOADS
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

INNOVATIVE TECHNOLOGIES FOR METALS RECOVERY AND PLASTIC VALORIZATION FROM ELECTRIC AND ELECTRONIC WASTE: AN INTEGRATED APPROACH
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The increasing diffusion of Hi-tech complex products has raised the attention of scientific community towards their End of Life (EoL) treatment, both in terms of assuring an appropriate disposal, to avoid the dispersion of harmful substances, and at the aim of their exploitation as valuable sources of raw materials. Within this study an integrated approach for waste electrical and electronic equipment (WEEE) end of life treatment is proposed based on the integration of hydrometallur...
Autori: Claudia Brunori
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26777

A HYDROMETALLURGICAL PROCESS FOR RECOVERING RARE EARTHS AND METALS FROM SPENT FLUORESCENT LAMPS
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The recovery of raw materials from waste represents a sustainable growth opportunity for those countries with limited mineral resources availability. A case study for an integrated approach to recover raw materials from spent fluorescent lamps is presented, with the aim of improving the current treatments which are only able to recover the glass fraction. In particular a hydrometallurgical process was developed to obtain valuable metals such antimony, copper, and rare earths (yttriu...
Autori: Roberta De Carolis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26782

EFFICIENT RECOVERY OF NON-SHREDDED TIRES VIA PYROLYSIS IN AN INNOVATIVE PILOT PLANT
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract New and end of life tires have been pyrolyzed in an innovative pilot plant that processes whole tires, thus saving the energy costs of shredding while allowing energy and materials recovery. Furthermore, the presence of a hydraulic guard guarantees high process safety. Several tests at different temperatures have been performed and the collected solid, liquid and gaseous products have been quantified and characterized. The influence of the maximum process temperature on yields and c...
Autori: Loris Giorgini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26783

INTERSECTORIAL REUSE OF WASTE AND SCRAPS FOR THE PRODUCTION OF BUILDING PRODUCTS: STRATEGIES AND VALORIZATION OF WASTE
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The European Commission has introduced a whole range of policies and initiatives to promote the product eco-innovation and the environmental impacts reductions. One of the key topic for the reduction of the environmental impacts is the waste recycling and reuse (turning waste into useful resources). A teamwork of Politecnico di Milano has developed a research work, still ongoing and continuously updated, called “The usefulness of the useless. Cross-sectorial evaluation of wast...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26788

EFFECT OF NICKEL CONTAMINATION ON THE GROWTH OF OLEAGINOUS YEASTS IN HYDROLISATES OF Arundo donax
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract Hydrolysates of Arundo donax, a crop offering high productivity in contaminated or salinized soils with no inputs of irrigation and agrochemicals, were used in a discontinuous fermenter to grow the oleaginous yeast Lipomyces starkey, to obtain microbial oils potentially useful for the production of 2nd-generation biodiesel. A mixture of fermentable sugars was obtained by steam-explosion and subsequent enzymatic hydrolysis of the lignocellulosic materials. The concentration of Ni2+ ...
Autori: Domenico Pirozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26789

DEALING WITH LCA MODELING FOR THE END OF LIFE OF MECHATRONIC PRODUCTS
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

PHYSICAL-MECHANICAL PROPERTIES OF NEW GREEN BUILDING MATERIALS BASED ON GLASS WASTE
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract Recently several innovative suggestions on how industrial wastes can be utilised in new products have been presented in literature, e.g. as filler or additives in concrete, incorporated in ceramic materials to produce glass-ceramics and pavement construction. In this work, metallurgical materials from secondary aluminium scrap processing and glass waste derived from treatments of packaging and fluorescent lamps were considered for fabrication of new ceramic materials using powder te...
Autori: Rosa Taurino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26794

SUSTAINABLE DESIGN STRATEGIES AND TECHNOLOGIES FOR A GREEN SPACE FOR STUDENTS AT TERRACINI CAMPUS, UNIBO
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract To make sustainability transitions happen, it is crucial not only to have strategic planning processes committed by the top management, but also to encourage community engagement, approaching and promoting a bottom-up process. In the specific case of a University Campus, that means the involvement of the students not only as consumers, but with a leading role in the sustainability process. DICAM department of University of Bologna has recently started the implementation of some prac...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26798

FUZZY MULTI-OBJECTIVE MODEL FOR SUPPLIER SELECTION CONSIDERING MULTIPLE PRODUCTS IN LOW CARBON SUPPLY CHAIN
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract Today companies are facing more and more with pressures for reducing carbon emissions, as a consequence of the development of the green movement and because materials continue to generate very large impacts on carbon emissions. In this context, supplier selection is one of the most vital components in purchasing management, which becomes more and more important. However, most of the earlier researchers have not paid enough attention to supplier selection in low carbon supply chain. ...
Autori: Wei Pan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26799

DYNAMICS ANALYSIS OF A MICROBIAL FUEL CELL SYSTEM AND PID CONTROL OF ITS POWER AND CURRENT BASED ON THE CRITICAL PROPORTION DEGREE METHOD
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract In this paper, the structure and working principles of a microbial fuel cell (MFC) are analysed, and a mathematical simulation model of MFCs is established based on the electrochemical equation, kinetic equation and material balance equation of a MFC. A simulation analysis and discussions are conducted in a MATLAB environment to investigate the effect of acetate concentration, influent flow and external resistance on the performance of a MFC system. The simulation model is demonstra...
Autori: Aimin An
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26803

PATH OPTIMIZATION OF CHINESE ALUMINUM CORPORATION FOR A CIRCULAR ECONOMY STRATEGY BASED ON A RESOURCE VALUE FLOW MODEL: A CASE STUDY OF CHINALCO
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract The objective of this paper is to propose an optimal path for a circular economy strategy of Aluminum Corporation of China (CHINALCO) by constructing a circular economy evaluation model. Based on CHINALCO’s resource circulation and the regularity of material balance, and by depicting the value information in the process of resource input, consumption, output and waste, we build a comprehensive evaluation model for the enterprise circular economy - a resource value flow equatio...
Autori: Fei Xiong
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26815

WASTE MANAGEMENT IN CIVIL ENGINEERING: A DYNAMIC FRAMEWORK
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract The recycling and later use of construction and demolition waste (C&D waste) as construction materials present a strategic inconvenience for many stakeholders involved in the sustainable construction. In some countries, the recycling percentage of C&D waste is around 80% of the C&D generated. However, in other countries this percentage is much lower. This complexity requires a better understanding of the recycling dynamic. In the specific case of Spain, the National Inte...
Autori: Nuria Calvo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26817

EFFICIENT LIGHTNING PROTECTION: OPTIMIZATION OF ECONOMIC, ENVIRONMENTAL AND SAFETY ASPECTS
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract It has been shown that the scale of damage in buildings with steel reinforcement, due to direct lightning strikes, is insignificantly small compared to lightning effects on buildings with no such steel reinforcement. Observed small-scale damages are also confined to points of strike; hence the only risk for occupants and properties is injury or damage caused by falling materials. A large number of such cases have been observed in Sri Lanka and Malaysia. All damaged structures, obser...
Autori: Chandima Gomes
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26821

NEW NATURAL BIOCOMPATIBLE MATERIALS OBTAINED BY AN ENVIRONMENTALLY FRIENDLY TECHNOLOGY, WITH APPLICATIONS IN WOUND-HEALING
Environmental Engineering and Management JournalVol. 14Nr. 9
Abstract In rural areas of Romania and other developing countries wounds and dermal affections represent one of the five most common reasons for people seeking medical care. The use of traditional medicines to treat many of these conditions has received little research or policy attention. The present work addresses the discovery of non-toxic treatments for dermal affections, and aims to prepare – based an environmentally friendly technology, and characterize hydrogels based on gelatin...
Autori: Călin Vasile Andriţoiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26842

THERMAL CONDUCTIVITY INVESTIGATION OF COMPOSITE FROM HEMP AND PEAT FIBRES
Environmental Engineering and Management JournalVol. 14Nr. 9
Abstract A large number of energy inefficient buildings were constructed without taking into account the principles of green building, which requires efficient utilization of local resources. In this work hemp and peat fibres were used in order to produce effective ecological thermal insulating material. Tests were carried out using short dishevelled hemp and chopped peat fibres. Effective composites from local renewable resources were produced. Macro- and microstructures of composites as we...
Autori: Rūta Stapulionienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26844

STUDY OF BOTTOM ASH RECOVERY BY MEANS OF AGING AND MECHANICAL SORTING PROCESSES
Environmental Engineering and Management JournalVol. 14Nr. 10
Abstract The amount of bottom ash produced in Italy from municipal solid waste incinerators is estimated at over a million tons per year. Up to now, it has almost all been disposed of in landfills. Therefore, large profit margins, from both the economic and environmental standpoint, can be expected from the recovery of this material, or at least from a fraction of it. In this study, a rapid procedure for the recovery of different bottom ash fractions based on mechanical sorting and aging was...
Autori: Ivano Vassura
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26853

STUDY OF PRESSURE DROP IN FIXED, FLUIDIZED AND SPOUTED BED OF SEVERAL ADSORBENT MATERIALS
Environmental Engineering and Management JournalVol. 14Nr. 10
Abstract An experimental study on the hydrodynamics of fixed, fluidized and spouted granular bed was performed. With this aim two commercial adsorbent materials and a composite material obtained by impregnation with a hygroscopic inorganic salt were employed. The fluid phase consisted in dry air. The obtained results highlight the influence of grain size, material density and roughness over pressure drop and gas velocity. Increasing grain size leads to decreasing pressure drop and increasing...
Autori: Ioan Solomon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26854

MUNICIPAL SOLID WASTE SORTING AND TREATMENT SCHEMES FOR THE MAXIMIZATION OF MATERIAL AND ENERGY RECOVERY IN A LATEST EU MEMBER
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract This paper analyses mass and energy balances of some Integrated Municipal Solid Waste Systems (IMSWS) focusing on MSW sorting, treatment and energy recovery conversion chains suitable for the last entries into the European Union (EU). In particular the Romanian case-study has been developed as reference scenario. In this context the actions timelines for the case-study are immediate (S1A), midterm (S1B) and long term (S2). In the scenarios S1A, S1B a poor selective collection (SC) i...
Autori: Gabriela Ionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26878

SUSCEPTIBILITY OF THERMOPLASTIC BASED COMPOSITES TO DEGRADATION BY MICROORGANISMS
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract In the present study, several selected formulations based on recycled (rPP) or virgin polyolefins (vPP) and lignocelluloses were prepared and subjected to microorganism attack. Biodegradation tests were performed with microbial strains belonging to fungal genera, like Aspergillus, Penicillium and Fusarium. The initiation of biodegradation was demonstrated by Scanning Electron Microscope (SEM) micrographs showing the colonization of surface samples by microbial strains. The crystalli...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26879

UNCONVENTIONAL MORTARS WITH RECYCLED CATHODE RAY TUBES WASTE GLASS
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

HAZARDOUS PROPERTIES OF AMMONIUM NITRATE AND MODELING OF EXPLOSIONS USING TNT EQUIVALENCY
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract The paper presents a study on the hazards associated with solid ammonium nitrate (AN) storage and handling, in particular the hazard of explosion. Due to its flammable and explosive characteristics, AN is largely used as an explosive material in the mining industry. Some specific problems encountered in the risk estimation are related to the determination of the explosive power of the AN, which depends on several characteristics. The simulation results of AN explosion using differen...
Autori: Zoltán Török
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26891

NOVEL BIOACTIVE AND BIODEGRADABLE MATERIALS FOR MEDICAL APPLICATIONS
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract Poly(vinyl chloride) (PVC) is the most widely used material for the production of medical devices such as intravenous fluid bags and tubing, enteral feeding, dialysis equipment and catheters. Despite of their numerous advantages, the plastic medical devices are non biodegradable and prone to microbial colonization causing biofilm associated infections which are difficult to treat and tend to chronicisation. A possible solution to surpass these limitations could be the fabrication of...
Autori: Petruța Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26894

ELECTROCHEMICAL AND SEM CHARACTERIZATION OF YsZ COATED CoCrMo ALLOY PROCESSED BY PLASMA SPRAYED TECHNIQUE
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract The CoCrMo alloys have been widely used in artificial knee or hip joints. It is well known that these materials have a good corrosion resistance and acceptable biocompatibility properties. Zirconia as a ceramic biomaterial facilitates the osteoconductivity and tissue osteogenetic capacity in new bone formation around implant. Linear polarization and electrochemical impedance spectroscopy (EIS) were employed to characterize the electrochemical behavior of plasma sprayed yttrium oxid...
Autori: Manuela Romaş
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26896

INDUSTRIAL SOLID WASTE MANAGEMENT IN THE GOVERNORATES OF NABLUS AND RAMALLAH & AL-BIREH, PALESTINE
Environmental Engineering and Management JournalVol. 14Nr. 12
Abstract In Palestine, environmental problems associated with industrial solid waste (ISW) have increased significantly in recent years. This paper presents survey results on current industrial solid waste management (ISWM) practices in the governorates of Nablus and Ramallah & Al-Bireh, Palestine. Solid waste generated from industries was quantified, characterized and discussed in terms of generation rate, storage, reuse/recycling, transportation, and final disposal. An attempt was made...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26903

UTILIZATION OF OIL-CONTAMINATED CLAYS AS CONSTRUCTION MATERIALS
Environmental Engineering and Management JournalVol. 14Nr. 12
Abstract The objective of this study is to manufacture a geopolymer by replacing part of the metakaolinite by calcined oil-contaminated clay (OCC) and investigate its properties. The effects of the calcination temperature, the mix design of the alkali activator, and the degree of calcined OCC replacement on the properties of the geopolymer were studied. Evaluation of pozzolanic activity and compressive strength as well as micro structure observation by SEM and XRD were performed in this stud...
Autori: Huan-Lin Luo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26905

AN OVERVIEW OF MUD TECHNOLOGY AND CHALLENGES TOWARD GREENING OF DRILLING FLUID
Environmental Engineering and Management JournalVol. 14Nr. 12
Abstract The current industrial trend is toward the development of sustainable technologies, and environmentally-friendly chemicals that might be used to enhance the drilling activities. This is due to the fact that petroleum industry is regarded as one of the hazardous and risky industries. Unfortunately, the majority of the toxic materials that are used in the formulation of drilling mud are employed to improve the quality and functions of drilling fluid. Oil based muds (OBMs) from hydroca...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26907

FERLENT® - A CONTROLLED RELEASE FERTILIZER PRODUCED FROM A POLYMERIC MATERIAL WITH AGRONOMIC BENEFITS
Environmental Engineering and Management JournalVol. 14Nr. 12
Abstract The possibility to use release controlled fertilizers in the agriculture of the tropical countries is more important than in the agriculture of the countries of the cold regions. In this context, the purpose of this work is the characterization of an encapsulated commercial Fertilizer of Controlled Release named FERLENT®, which was covered with a polymeric material, obtained in situ, under controlled conditions, which allowed to corroborate the fairly well adjustment of the synt...
Autori: Mayra González Hurtado
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26916

BELGRADE SOLID WASTE MANAGEMENT OPTIMIZATION - POTENTIAL OF LANDFILL GAS RECOVERY
Environmental Engineering and Management JournalVol. 14Nr. 12
Abstract Establishing a management system for collecting and disposing the solid waste materials is of great importance in urban areas. Belgrade, the capital city of Serbia, is at its initial phase of managing this problem. Currently, landfill disposal is the main option for dealing with rapidly growing amounts of waste. This paper’s research goal is to estimate the landfill gas quantity at Belgrade’s only landfill site Vinca, and to estimate the potential for collection and util...
Autori: Vesna Alivojvodic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26923

EFFECT OF CLAY SOIL CONTENT ON FECAL BACTERIA REMOVAL IN AN INTERMITTENT MEDIA INFILTRATION SYSTEM
Environmental Engineering and Management JournalVol. 15Nr. 1
Water scarcity, the degradation of freshwater resources, and wastewater pollution are reaching crisis levels, especially in arid regions of the world. The reuse of wastewater was investigated by using intermittent media infiltration (IMI) to evaluate fecal coliform (FC) removal efficiency. Twelve IMI columns were packed with soil and natural filtering materials (sand, zeolite, vermicompost and charcoal) at percentages of 25, 50 and 75. The municipal wastewater was treated for the FC analysis ...
Autori: Sasirot Khamkure
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26935

RESEARCH ON SUSTAINABLE USE OF POWDERY WASTE
Environmental Engineering and Management JournalVol. 15Nr. 1
In the context of sustainable development, focus must be set on reasonable use of natural and energetic resources, which is a real must at present. Besides these, material and informational resources add up to give the full picture of sustainable development resources. The paper introduces a valid solution of powdery waste recycling into pellets for the steelmaking industry. The pellets are obtained from powdery wastes (steel plant dust, red sludge, lime dust, dolomite waste, waste limestone,...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26944

A REVIEW OF FERROELECTRIC PACKED BED NON THERMAL PLASMA REACTOR FOR VOLATILE ORGANIC COMPOUNDS DECOMPOSITION
Environmental Engineering and Management JournalVol. 15Nr. 2
One way to improve the performance of non-thermal plasma (NTP) reactor for volatile organic compound decomposition is by the introduction of ferroelectric materials into the discharge zone of NTP. This paper is a review of the breakthroughs and the current status of the applications of this technology for the abatement of volatile organic compounds (VOCs). It covers the process of energy generation in NTP, VOCs decomposition processes and the effects of critical factors such as type of packed...
Autori: Abdullahi Mohammed Evuti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26948

OCCURRENCE AND SOURCES OF POLYCYCLIC AROMATIC HYDROCARBONS (PAHs) IN DRAINAGE CHANNEL SEDIMENTS IN VOJVODINA (SERBIA)
Environmental Engineering and Management JournalVol. 15Nr. 2
A drainage channel network in Vojvodina, Serbia, made for collection and transition of (sub)surface waters from waterlogged arable land areas, is exposed to diffuse and/or point contamination sources. Over time, the channel network has accumulated sediment material containing potentially harmful organic substances such as polycyclic aromatic hydrocarbons (PAHs). In this study, the concentration of 16 environmentally relevant PAH substances from 42 sampling points in drainage channel sediments...
Autori: Radovan Savić
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26950

STUDIES OF PLANT MATERIALS FROM MINING, INDUSTRIAL AND GREEN SITES BY SPECTROSCOPIC METHODS
Environmental Engineering and Management JournalVol. 15Nr. 2
Various plants were investigated here as bioindicators for control of the environment. Grass, moss and leaves of maple, birch and oak from different locations, i.e., mining, chemical industrial sites and open green area in a small industrial town in the southwestern Poland (Zloty Stok) were examined. Concentrations of As, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb, Se, Sr, Ti, V and Zn were measured by the ICP-OES and CVG-ICP-OES techniques. Infrared spectroscopy (FT-IR) was used to inves...
Autori: Lukasz Zarebski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26951

GEOMORPHOLOGICAL APPLICATIONS FOR SUSCEPTIBILITY MAPPING OF LANDSLIDES IN NATURAL PARKS
Environmental Engineering and Management JournalVol. 15Nr. 2
This work establishes a mapping procedure to determine the risk of susceptibility to hillside movements (landslides) that can be applied to any territory by means of algebraic mapping of the passive or determining factors that influence risk. On the one hand, derivative morphometric mappings obtained from a Digital Terrain Model that notably influence the genesis of active processes have been generated; these mappings include gradient mapping, aspect mapping and type of curvature mapping. On ...
Autori: Antonio Miguel Martínez-Graña
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26954

SOURCES AND PATHWAYS OF HEAVY METALS IN FRUITS AND THE COUNTERMEASURES
Environmental Engineering and Management JournalVol. 15Nr. 2
To explore the main sources and pathways of heavy metals entering fruits and the corresponding countermeasures, a field survey was conducted in Pujiang County, Zhejiang Province, China. The results showed that heavy metals in fruits came mainly from the use of foliar fertilizers, ripening agents, fungicides, pesticides, and other sprayed materials during the flowering and ripening stages. Therefore, a government program should be established to improve monitoring of agricultural products ente...
Autori: Bin Fang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26955

DETERMINATION OF AIR CHANGE RATES BY USING INDOOR CO AS TRACER: APPLICABILITY AND ENVIRONMENTAL ISSUES
Environmental Engineering and Management JournalVol. 15Nr. 2
Air change rates and ventilation of a room was determined by CO Tracer Decay Technique. The tracer was generated by burning bulk amount of mosquito coils, an easy and low cost method of CO generation. The temporal decay in CO concentration in indoor air under closed and open room conditions were determined by collecting indoor air periodically at a few minutes interval in Tedler Bags and analyzing the same for CO. The air changes rate per hour (ACH) was calculated from the temporal decline of...
Autori: Deepanjan Majumdar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26965

RESEARCH ON INCREASING THE REACTION SURFACE OF SELF-REDUCING BRIQUETTES
Environmental Engineering and Management JournalVol. 15Nr. 2
Waste recycling in steel industry by turning grain-size and powdery waste into pellets is a must now more than ever for economical motivation, in order to save raw materials and also for ecological reasons, as it leads to a cut down in the quantity of dumped waste. Industrial practice offers processors various technologies of waste recycling (agglomeration, briquetting, pelleting, mechanical mixture). The optimal variant should be chosen according to waste type, its content of useful elements...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26968

THE IMPACT OF SLOPE ON FIRE SPREAD SIMULATION
Environmental Engineering and Management JournalVol. 15Nr. 3
Every year a lot of hectares of forest are burn in Europe, especially in the south part of Europe, where the climate is hot and dry during the summer. Last decades, with climate change, this part of the Europe becomes dryer and increase of the field fires is observed. The same problems arise in northern America, Australia and other dry regions. A model field fire spread can have several applications. The prevision of the fire front can help the fireman to optimize their work, and to reduce th...
Autori: Stefka Fidanova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26973

OCCURRENCE OF PLASTIC WASTE IN THE ENVIRONMENT: ECOLOGICAL AND HEALTH RISKS
Environmental Engineering and Management JournalVol. 15Nr. 3
Environmental threats posed in the environment by plastic production and plastic wastes continue to be a major problem today, closely connected with the increase of plastics consumption by the population. Moreover, little efforts are involved in some parts of the world associated to plastic waste collection, recycling and reuse. Considering all these prerequisites, the identification and discussion of risks generated by plastic production and waste in the environment are performed in this pap...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26990

POTENTIALLY TOXIC ELEMENTS IN URBAN SOILS OF IASI (ROMANIA)
Environmental Engineering and Management JournalVol. 15Nr. 3
Our study aims to analyse soil quality based on the concentrations of potentially toxic elements (PTEs) in natural or slightly modified anthropogenic soils, technosols and landfill deposits in Iasi. The pollution level analysis based on lognormal distribution plot allows the differentiation of elements coming from the parent material (Mo, Cd, Ni and As) of those with anthropogenic origin (Pb, Zn and Cu). The enrichment factor (EF) calculated based on manganese (Mn) as reference in the parent ...
Autori: Cristian Vasilica Secu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26991

ASSESSMENT OF STRUCTURE INFLUENCE ON THERMAL CONDUCTIVITY OF HEMP SHIVES COMPOSITE
Environmental Engineering and Management JournalVol. 15Nr. 3
In past ten years area of green technologies and materials was the most growing industry sector in the world. It is related with global warming, air pollution and energy saving. Building sector intensively increased air pollution and is related with high energy consumptions. The use of renewable or recyclable materials can reduce these problems. In current work, thermal insulating materials from hemp shives and corn starch were investigated. Structures of various shives fractions were analyz...
Autori: Giedrius Balčiūnas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26992

EVALUATION OF BAGASSE PITH AS A SKELETON BUILDER FOR IMPROVEMENT OF SLUDGE DEWATERING
Environmental Engineering and Management JournalVol. 15Nr. 4
High contents of colloidal and organic materials in municipal wastewater sludge cause problems in the process of dewatering. The filtering efficiency can be improved by chemical conditioning, but the effectiveness of mechanical dewatering is limited because flocculated sludge is highly compressible. Physical conditioners such as bagasse can be used to facilitate mechanical dewatering. This paper describes the use of bagasse pith (cane sugar waste fiber) to improve the dewatering process of mu...
Autori: Nematallah Jaafarzadeh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26995

INVESTIGATION OF AMMONIUM ION ADSORPTION ONTO REGENERATED SPENT BLEACHING EARTH: PARAMETERS AND EQUILIBRIUM STUDY
Environmental Engineering and Management JournalVol. 15Nr. 4
The release of nitrogen compounds into the environment is a major concern worldwide. Different studies howed that recycled materials have a high removal capacity for pollutants. Bentonite and its major clay minerals, smectites clays are common bleaching agents used for oil refinery bleaching and known as bleaching earth (BE). In this study regeneration of spent bleaching earth (SBE) acquired from the vegetable oil industry was surveyed via different methods and the regenerated spent bleaching...
Autori: Mohammad Malakootian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27000

REVIEW ON RECENT ADVANCES IN ENVIRONMENTAL REMEDIATION AND RELATED TOXICITY OF ENGINEERED NANOPARTICLES
Environmental Engineering and Management JournalVol. 15Nr. 4
Production and utilization of engineered nanoparticles (ENPs), which are smart materials with ability of sensing and destroying chemical contaminants, is growing rapidly. However, these materials seem to have some ecological and health adverse effects. Hence, the main goal of this review study is to give a brief description about the recent developments of the commercial available engineered nano particles in the environmental remediation and also to note the current state of findings about t...
Autori: Mohammadreza Kamali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27017

MONITORING OF RADIOACTIVITY LEVEL IN AUTOCLAVED AERATED CONCRETE PRODUCED IN ROMANIA AND RISK ASSESSMENT
Environmental Engineering and Management JournalVol. 15Nr. 4
This paper presents the results of measurements related to the activity concentrations of 226Ra, 232Th and 40K in autoclaved aerated concrete (AAC) used as building materials for various constructions in Romania. Radiation index (I) and the hazard index (HI) were estimated to assess the risk arising from the usage of AAC materials. Our study considered various AAC samples produced by different companies, in 2015. The activity concentrations of 226Ra, 232Th and 40K were measured using by a gam...
Autori: Dorina Nicolina Isopescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27018

EDITORIAL ADVANCED ECO-TECHNOLOGIES AND MATERIALS FOR ENVIRONMENTAL AND HEALTH APPLICATION
Environmental Engineering and Management JournalVol. 15Nr. 5
IN VITRO ELECTROCHEMICAL PROPERTIES OF BIODEGRADABLE YSZ-COATED MgCa ALLOY
Environmental Engineering and Management JournalVol. 15Nr. 5
Zirconia (ZrO2) as a ceramic biomaterial facilitates the osteoconductivity in new bone formation around implant. Surface characterization before and after electrochemical testing was performed used scanning electron microscopy (SEM). The electrochemical properties of the yttrium oxide stabilized zirconium oxide (YSZ) coated and uncoated MgCa sample with the open circuit potential at different immersion time in Ringer’s solution were studied by electrochemical impedance spectroscopy (EI...
Autori: Bogdan Istrate
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27021

STUDY ON THE BIODEGRADABILITY OF FeMnSi ALLOY
Environmental Engineering and Management JournalVol. 15Nr. 5
A biodegradable iron based alloy was obtained through classical melting method using a furnace with controlled atmosphere. The metallic material was obtained from high purity materials using a proper obtaining method. The material is proposed as an alternative to magnesium alloys that have a very fast degradation period for applications with longer healing periods (more than 3 and between 12 to 18 months). The material was analyzed using scanning electron microscopy (SEM) and X-ray dispersive...
Autori: Sergiu Stanciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27023

REMOVAL OF HEXAVALENT CHROMIUM FROM WATERS BY MEANS OF A TiO2-Fe3O4 NANOCOMPOSITE
Environmental Engineering and Management JournalVol. 15Nr. 5
This paper aims to establish the capacity removal of hexavalent chromium [Cr(VI)] from wastewaters using a TiO2 – Fe3O4 based nanocomposite. Latest researches in the field point adsorption as a better option for removal of heavy metal ions from waters, this method being more efficient and cost effective, in comparison with other advanced methods like reverse osmosis, ion exchange, nanofiltration, etc. Based on this information, the goal of this work had as purpose the obtaining, charact...
Autori: Andra Predescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27025

MAGNETIC NANOPARTICLES USED IN ENVINRONMENTAL ENGINEERING FOR Pb AND Zn REMOVAL
Environmental Engineering and Management JournalVol. 15Nr. 5
Maghemite nanoparticles (γ-Fe2O3) were synthesized in order to be used as magnetic adsorbent for two heavy metals, Pb(II) and Zn(II), from aqueous solutions. γ-Fe2O3 was prepared from magnetite nanoparticles and was tested for single and binary aqueous solutions. Efficiency removal (%) for single solutions appears only after 10 minutes and was higher than 80%. In case of binary solutions, same results regarding efficiency removal were registered after 60 minutes, being almost 90% ...
Autori: Ecaterina Matei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27029

NATURAL AND WASTE MATERIALS AS GREEN SORBENTS FOR Cd(II) REMOVAL FROM AQUEOUS EFFLUENTS
Environmental Engineering and Management JournalVol. 15Nr. 5
Removal of Cd(II) from aqueous streams is of special concern because of its very high toxicity and persistent nature. The sorbents based on natural and waste materials have very promising performances in the treatment of Cd(II) contaminated waters. Very few reviews are available that provide valuable information on the various aspects of the utilization of natural and waste materials for Cd(II) metal ions removal. In this context, this review examines a wide range of materials as green sorben...
Autori: Lavinia Tofan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27033

RECOVERY OF SAWDUST AND RECYCLED RUBBER GRANULES AS SOUND ABSORBING MATERIALS
Environmental Engineering and Management JournalVol. 15Nr. 5
This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

STUDIES ON THE POSSIBILITIES OF USING EXPANDED PERLITE FOR REDUCING BUILDINGS ENERGY CONSUMPTION
Environmental Engineering and Management JournalVol. 15Nr. 5
In the current context, when studies regarding the planet’s ability to sustain the human species consumption present more and more grim scenarios, it is required, more than ever, to consider sustainable development as a main priority for development strategies worldwide. In this sense, reducing the negative environmental impact of building materials and lowering energy consumption in buildings exploitation becomes the main axis for most of the new tendencies in architecture and civil e...
Autori: Marian Pruteanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27040

PRACTICAL WAYS OF EXTRACTING KERATIN FROM KERATINOUS WASTES AND BY-PRODUCTS: A REVIEW
Environmental Engineering and Management JournalVol. 15Nr. 5
Renewable resources, biopolymers and bio-based materials are keywords of the sustainable development and environmental sustainability concepts. Biopolymers, the green alternatives to fossil fuel based polymers, have already found different feasible applications, from consumer goods to regenerative medicine. Keratin is the biopolymer contained in the skin derivatives and appendages and is one of the the proteins with the most sophisticated architecture nature could produce. It is found in huge...
Autori: Hossein Rajabinejad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27043

ENVIRONMENTAL AXES: MANAGEMENT AND ECONOMIC DEVELOPMENT. REGIONAL AND LOCAL ASPECTS
Environmental Engineering and Management JournalVol. 15Nr. 5
An environmental axis consists of elements, and the way they behave reflects the conditions in which they work. Romania, for example, is a country located at the crossroads of the most important environmental axes of the continent, namely the West-East axis: Western Europe - the ex-Soviet space; the North-West - South-East axis: Central Europe - Asia Minor and the Middle East; the axis of the seas: the Caspian Sea - the Black Sea - the Mediterranean; the axis of rivers and canals: Rhine - Mai...
Autori: Călin-Cornel Pop
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27044

FACTORS INFLUENCING THE THERMOCHEMICAL BEHAVIOURS OF TIRE RUBBER: PART I - INFLUENCE OF FIBER AND METAL
Environmental Engineering and Management JournalVol. 15Nr. 6
In this paper both kinetic and thermodynamic parameters of thermochemical transformation of waste tires are evaluated by using thermogravimetric analysis (TGA). For rubber thermochemical decomposition, individually and in the presence of other tires components, some kinetic and thermodynamic parameters such as energy of activation (Ea), frequency factor (A), reaction enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) have been calculated by using the integration method. The e...
Autori: Sana Kordoghli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27060

BIOREMOVAL OF TRIVALENT CHROMIUM USING INDIGENOUS Bacillus species – A BIOFILM BASED APPROACH
Environmental Engineering and Management JournalVol. 15Nr. 7
Heavy metal pollution is a major source of aquatic contamination and has deleterious effect on the environment, therefore treatment of the polluted sites and wastewater becomes very essential. Biofilm based bioremoval of heavy metals have been a new area of research. Bacterial strains belonging to the genus Bacillus, isolated from chromium polluted soil (Palar river basin, India) have been employed as consortium for Cr(III) removal from chrome tanning effluent. The bacterial isolates were fou...
Autori: Aafreen Fathima
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27086

IMPACT OF BIOSTIMULATION AND BIOAUGMENTATION AS BIOREMEDIATION SYSTEMS ON DIESEL CONTAMINATED SOILS
Environmental Engineering and Management JournalVol. 15Nr. 8
This paper analyzes and compares the effects of bioremediation on total petroleum hydrocarbon (TPH) degradation using composting techniques as well as biostimulation and bioaugmentation approaches. Compost and sludge were added as organic amendments with the dual purpose of providing both nutrients and microorganisms to the contaminated soil. In addition, the effect of inoculation with white-rot fungus Trametes versicolor was assessed. Two different types of soils were considered: a poor soi...
Autori: Juliana Abraham
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27101

COMPARATIVE LIFE CYCLE ASSESSMENT STUDY OF THREE WINTER WHEAT PRODUCTION SYSTEMS IN THE EUROPEAN UNION
Environmental Engineering and Management JournalVol. 15Nr. 8
Three different winter wheat production systems for three European countries (United Kingdom, France and Italy), all with different climatic conditions, soil management and input levels (e.g. tillage, fertilizers, herbicides and pesticides) were analysed from an environmental perspective. The intended applications were the analysis and comparison from a Life Cycle Assessment (LCA) perspective and the identification of the key parameters which have the greatest influence on final results. The ...
Autori: Daniele Cambria
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27102

ON THE PRESENCE OF ORGANOPHOSPHORUS PESTICIDES IN DRAINAGE WATER AND ITS REMEDIATION TECHNOLOGIES
Environmental Engineering and Management JournalVol. 15Nr. 8
This study was carried out to monitor the presence of organophosphorus in drainage water (Kafr El-Sheikh (Kotshinar Drainage), Fowa (Fowa Drainge No.11), Metobess (El-Hokss Drainage), Beila (Karakat Drainage), Balteem (Hafeer Shihabeldeen Drainage), Nashart Drainage and El-Hamoul (El-Hamoul Drainage) in Kafr-El-Sheikh Governorate, Egypt. Furthermore, the efficacy of chemical (advanced oxidation processes) and bioremediation (effective microorganisms) for chlorpyrifos removing in drainage wat...
Autori: Aly Derbalah
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27104

EDITORIAL Material & Energy Recovery and Sustainable Development ECOMONDO 2015 19th International Trade Fair of Material & Energy Recovery and Sustainable Development
Environmental Engineering and Management JournalVol. 15Nr. 9
The contributions in the form of Full papers collected in this Special Issue of Environmental Engineering and Management Journal were selected from lectures and posters of the scientific and technical conferences hosted by Ecomondo 2015 held in Rimini, Italy, 3–6 November, 2015 (http://en.ecomondo.com). ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27118

VALORIZATION OF TYRES WASTE PYROLYSIS RESIDUE IN LIGHTWEIGHT MATERIALS
Environmental Engineering and Management JournalVol. 15Nr. 9
The aim of this study is to investigate an innovative way to utilize the char obtained from tyres pyrolysis, in order to realize lightweight materials for building. Pyrolysis residue, mixed with three types of waste glass, has been used as raw material to obtain lightweight materials, exploiting its capability to behave as foaming agent. The results demonstrate that the pyrolysis char is a good foaming agent for the mixtures 50/50 with glassy sand and packaging glass waste, thermal treated at...
Autori: Fernanda Andreola
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27119

ENVIRONMENTAL FOOTPRINT IN THE PRODUCTION OF RECYCLED WOOL
Environmental Engineering and Management JournalVol. 15Nr. 9
We computed the Product Environmental Footprint (PEF) to identify the environmental performance of recycled wool by means of data belonging to a real case study in Italy. First, we analyzed inventory data quality by computing the data quality rating (DQR) index, according to the criteria provided by the PEF protocol. Quality of specific and generic data (selected from the Ecoinvent database) was evaluated as excellent and good, respectively. We then quantified the impacts related to each rele...
Autori: Silvia Bamonti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27121

RAPESEED MEAL: AN AGRO-WASTE FOR CHEAP/LOW COST LACCASE PRODUCTION
Environmental Engineering and Management JournalVol. 15Nr. 9
Rapeseed meal (RM) is an abundant and cheap by-product of oil extraction process. RM is a rich source of nitrogen, carbon, and minerals. Thanks to these features, RM has a striking potential for eco-friendly production of high value products in biotechnological processes. In this study, the possibility of using a low-cost medium based on the water soluble fraction of RM for laccase production by the fungus Pleurotus ostreatus has been evaluated and compared with the use of synthetic complex ...
Autori: Lucia Guarino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27129

PRODUCTION OF BIOPLASTIC FROM WASTE OILS BY RECOMBINANT Escherichia coli: A PIT-STOP IN WASTE FRYING OIL TO BIO-DIESEL CONVERSION RACE
Environmental Engineering and Management JournalVol. 15Nr. 9
Waste frying oil (WFO) is a complex and heterogeneous waste collected mainly from restaurants and, to a lesser extent, from food processors and households. In the last decades, interest for this waste has deeply grown and a strong competition in grabbing this raw material has begun. About 90% of WFOs collected in Europe is recycled for biodiesel production, being the high free fatty acids (FFAs) concentration in WFOs one of the main drawback limiting the yield of the conversion process. In th...
Autori: Cinzia Pezzella
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27130

ENVIRONMENTALLY FRIENDLY PHYTOSYNTHESIS OF SILVER-BASED MATERIALS USING Cornus mas L. FRUITS
Environmental Engineering and Management JournalVol. 15Nr. 9
The aim of the present study was to prepare environmentally friendly silver-based materials using Cornus mas L. fruits extract. For this purpose, silver nanoparticles (Cornus mas-AgNPs) were green synthesized using this plant extract. The bioreduction of silver ions was analyzed by UV–VIS and ATR-FTIR spectroscopic studies. Scanning Electron Microscopy (SEM) analysis revealed the formation of spherical phyto-nanosilver particles with size ranging between 12 and 40 nm. Different amounts ...
Autori: Ioana-Raluca Suica-Bunghez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27139

REMOVAL OF AMMONIA NITROGEN FROM SWINE WASTERWATER BY ELECTROOXIDATION USING Ti/Mn-Ni/SnO2-Sb-CeO2 ANODE
Environmental Engineering and Management JournalVol. 15Nr. 10
An electrochemical oxidation system using Titanium-based material as anode was setup and used to remove ammonium nitrogen (NH4-N) from swine wastewater. The effects of electrode material, current density, pH, and chlorine ion concentration were evaluated by removal rate of NH4-N and energy consume. The results showed that the NH4-N removal rate reached 98.5% using Ti/Mn-Ni/SnO2-Sb-CeO2 material as anode under the conditions: detention time of 60 minutes, pH of 8-10, current density of 20 mA/...
Autori: Xuewen Yi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27146

ASSESSMENT OF STRUCTURE AND MOISTURE INFLUENCE ON THE PROPERTIES OF LOOSE-FILL CELLULOSE INSULATION
Environmental Engineering and Management JournalVol. 15Nr. 10
The effectiveness of thermal insulation materials mostly depends on their thermal conductivity. The low thermal conductivity is predetermined by density, structure, moisture content and temperature of material and, considerably less, by other indices. Loosefill cellulose insulation is allocated to the group of materials, the density of which fluctuates within large limits. This property is related not only to application of cellulose wool in different constructions, but also to technological ...
Autori: Sigitas Vėjelis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27165

MULTI-CRITERIA METHODS FOR SELECTION OF ENCAPSULATION MATERIALS FOR PHOTOVOLTAIC CELLS
Environmental Engineering and Management JournalVol. 15Nr. 10
In this paper we applied multi-criteria methods of decision in order to establish the best encapsulation material to be used in producing photovoltaic modules. The encapsulation materials play an important role in establishing the PV module performance, especially if referring to their ability to increase their life time. For our study, we have considered the most widely used encapsulation materials available on the market, such as Ethylene-Vinyl Acetate (EVA), Polyvinyl Butyral (PVB), Thermo...
Autori: Gabriela Demian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27169

EFFECTIVE MERCURY REMOVAL USING A NEW DEVELOPED POLYMER CONTAINING 2-(2′ THIAZOLYLAZO) P-CRESOL
Environmental Engineering and Management JournalVol. 15Nr. 11
A new material containing 2-(2′ thiazolylazo) p-cresol (TAC) grafted poly acrylamide (PAA) was prepared and its adsorption ability was studied for the removal of inorganic mercury from aqueous media. Adsorption of Mercury (II) ions from aqueous solution was investigated in detail as a function of mercury concentration, pH, ionic strength, and temperature. The adsorption data were analyzed by using the Langmuir, Freundlich and Dubinin-Radushkevich (DR) models. The adsorption of Mercury (...
Autori: Selçuk Şimşek
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27170

ENVIRONMENTAL MANAGEMENT SYSTEMS CERTIFICATION: INSIGHTS FROM PORTUGUESE CONSTRUCTION COMPANIES
Environmental Engineering and Management JournalVol. 15Nr. 11
Against a background of growing concern with environmental issues, resource consumption and waste production in the construction sector, this article presents the results of a study on the implementation of environmental management systems (EMS) certification in Portuguese construction companies. It reports on how construction companies perceive motives, difficulties, benefits and effectiveness of implementing EMS certification. A questionnaire served as the basis for data collection. It was sen...
Autori: Caroline Dominguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27174

ADSORPTION OF TARTRAZINE ON AN IRON MODIFIED ZEOLITIC TUFF
Environmental Engineering and Management JournalVol. 15Nr. 11
The adsorption of tartrazine from aqueous solution was evaluated using an iron (III) modified zeolitic tuff. The adsorbent was characterized by scanning electron microscopy and X-ray power diffraction; the modification process does not affect the crystalline structure of the zeolitic tuff. Sorption kinetic, isotherms, dose and pH effects were determined and the adsorption behavior was analyzed. The sorption equilibrium was reached in 72 hours, the adsorption capacity determined by the Langmuir m...
Autori: Adrián Alcántara-Cobos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27182

PRODUCTION OF PAPER AND LIGNIN FROM Hesperaloe funifera
Environmental Engineering and Management JournalVol. 15Nr. 11
Hesperaloe funifera was studied as a new raw material for paper manufacturing and lignin recovery. An experimental design was carried out to improve the quality of the obtained pulp varying the process temperature (155, 170 and 185 ºC), time reaction (20, 40 and 60 minutes) and soda concentration (5, 10 and 15 %). All experiments were carried out with 1% anthraquinone. Lignin content, holocellulose content, α-cellulose, viscosity, Kappa number and drainability were determined in the d...
Autori: Mª Ángeles de Andrés
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27185

ORGANIC ACID PRODUCTION FROM THE ORGANIC FRACTION OF MUNICIPAL SOLID WASTE AND COW MANURE IN LEACHING BED REACTORS
Environmental Engineering and Management JournalVol. 15Nr. 11
This study was carried out to (1) investigate the potential of in-vessel solid-state anaerobic acidogenic co-digestion of high solids containing substrates, namely organic fraction of municipal solid waste (OFMSW) and cow manure and (2) examine the feasibility of using leaching bed reactors (LBR) for hydrolysis/liquefaction and acidification of OFMSW and cow manure mixtures for maximum total volatile fatty acid (VFA) and alcohol production. Results indicated that hydrolysis efficiency of 20-25% ...
Autori: Tuba H. Erguder
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27186

SUITABILITY OF A CRETACEOUS NATURAL Na-BENTONITE AS CONSTRUCTION MATERIAL FOR LANDFILL LINERS
Environmental Engineering and Management JournalVol. 15Nr. 11
A natural Cretaceous sodium (Na) bentonite from North Patagonia, Argentine, is considered a potential construction material for landfill liners. It is studied alone and in mixtures with sand. Physical and chemical properties of the Na-bentonite were determined to verify the suitability of this material for the construction of low permeability mineral liners. Hydraulic conductivity measurements were conducted on pure bentonite and on mixtures of poorly graded sand with 3, 6, 9 and 12% of Na-bento...
Autori: Telma Belén Musso
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27190

SYNTHESIS, CHARACTERIZATION AND CATALYTIC BEHAVIOR OF Mg-Zn FERRITES SUPPORTED ON ALUMINA
Environmental Engineering and Management JournalVol. 15Nr. 11
Catalysts based on nanocrystalline Mg-Zn ferrites supported on commercial alumina were prepared by in situ sol-gel auto-combustion technique. The as-obtained materials were characterized using Fourier Transform Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), atomic force microscopy (AFM) and Brunauer-Emmett-Teller (BET) specific surface area measurement. These materials were tested as catalysts for hydrogen peroxide decomposition and phenol oxidation reactions. The catalytic activity of ...
Autori: Tamara Slatineanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27192

LIFE CYCLE ASSESSMENT (LCA) OF MUNICIPAL SOLID WASTE MANAGEMENT SYSTEMS IN CLUJ COUNTY, ROMANIA
Environmental Engineering and Management JournalVol. 16Nr. 1
Life Cycle Assessment (LCA) is a methodology that can be used to evaluate the environmental performance of municipal solid waste management systems (MSWMS). Despite of Waste Directive provisions, this methodology is insufficiently applied as a decision-support method able to identify the best option for the waste management in Romania. In this paper we applied LCA methodology to study of the municipal waste management system of Cluj County, supported by GaBi software. The aim of this study is to...
Autori: Gabriela-Emilia Popiţa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27225

SILICA GEL MODIFIED WITH AMINO IMINE GROUPS AS AN ADSORBENT FOR METALLIC CATIONS
Environmental Engineering and Management JournalVol. 16Nr. 1
In this study, silica gel initially reacted with N-(2-aminoethyl)-3-aminopropyl-triethoxysilane and subsequently with formaldehyde resulted in a modified solid that contained amino imine groups, Sil2NCH2. The solids were characterized by CHN elemental analysis, thermogravimetric analysis (TGA/DTG), FTIR spectroscopy, 13C solid-state NMR, and nitrogen adsorption/desorption measurements. The adsorption of Cd(II), Pb(II) and Cr(VI) ions onto Sil2NCH2 in aqueous solutions were examined to study the ...
Autori: Franklin Pessoa Aguiar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27242

ORNAMENTAL ROCK SOLID WASTE: A LOW-COST SORBENT FOR ARSENIC(V) AND MANGANESE(II)
Environmental Engineering and Management JournalVol. 16Nr. 2
The capability of ornamental rocks solid waste (ORSW) as a low-cost sorbent was investigated in order to remove As(V) and Mn(II) from aqueous solution. Physical-chemical characterization analyses of the raw material presented albite and quartz as the main minerals. The solid waste presents low surface area (209.70 m2/g). The Langmuir, Freundlich, Sips (Langmuir-Freundlich), Redlich-Petersen and Tóth models were used to analyze sorption phenomena. The maximum sorption capability from the e...
Autori: Fernando Jorge Santos Oliveira
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27246

INFLUENCE OF ELECTRODE MATERIAL ON PERFORMANCE OF SEDIMENT MICROBIAL FUEL CELL REMEDIATING AQUACULTURE WATER
Environmental Engineering and Management JournalVol. 16Nr. 2
Non-availability of good quality water in sufficient quantities and the environmental impacts of used water discharges have led to the treatment and reuse of the aquaculture water contaminated with dissolved organics and ammonia rather than discharging it. This paper explores the effectiveness of in-situ sediment microbial fuel cell (MFC) for aquaculture water treatment along with generation of electricity. A sediment microbial fuel cell (SMFC) was designed and the efficiency of stainless steel ...
Autori: Thypparampil Karunakaran Sajana
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27261

COMPETITIVE BIOSORPTION OF Pb(II), Cu(II), Cd(II) AND Zn(II) USING COMPOSTED LIVESTOCK WASTE IN BATCH AND COLUMN EXPERIMENTS
Environmental Engineering and Management JournalVol. 16Nr. 2
Composted livestock waste (CLW) was studied as one low-cost material to remove Pb(II), Cu(II), Cd(II) and Zn(II) from simulated acid mine drainage (AMD) by batch and column experiments. The adsorption isotherm data were well fitted by the Langmuir model. The maximum monolayer adsorption capacities were 0.5485 mmol/g for Pb(II), 0.4092 mmol/g for Cu(II), 0.2246 mmol/g for Cd(II), and 0.1879 mmol/g for Zn(II) at pH 4.0. Due to the competition effect, the adsorption capacity of the single metal ion...
Autori: Mingliang Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27262

THERMAL STUDY OF ADSORBENTS PREPARED FROM WASTE TYRES
Environmental Engineering and Management JournalVol. 16Nr. 2
Carbonaceous materials were obtained from waste tyres and their potential application as hydrogen sulphide adsorbents was investigated. The adsorbents were obtained by pyrolysis of waste tyres and physical (CO2) or chemical (KOH) activation at 550 and 800ºC. The effect of modification conditions on the performance of waste tyres based materials as adsorbents of H2S at room temperature in dry and wet conditions was investigated. Sorption capacity of such adsorbents was found to strongly depe...
Autori: Magdalena Hofman-Bieniek
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27263

HEMP DECONTAMINATION OF POLY-METALLIC AQUEOUS SOLUTIONS
Environmental Engineering and Management JournalVol. 16Nr. 3
This study investigates the adsorption of several metals in aqueous solution, by hemp materials (loose fibre and felted fibre). After characterization of the fibre, an extensive study was conducted on the adsorption properties of this material. The experiments were carried out in poly-metallic aqueous solutions containing Al, Co, Cr, Cu, Ni and Zn at a concentration of 1 mg L-1 and 10 mg L-1 each. The pH effect was found to lead to an optimum between pH 4 and 4.5. The kinetics of the adsorption ...
Autori: Justine Bugnet
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27272

SYNTHESIS, CHARACTERIZATION AND FUNCTIONALIZATION OF MCM-41 FOR THE REMOVAL OF ORGANIC COMPOUNDS FROM WASTEWATERS
Environmental Engineering and Management JournalVol. 16Nr. 3
In this study was synthesized MCM-41 mesoporous silica by hydrothermal treatment and funtionalized with titanium in order to obtain mesoporous materials with high surfacea area and photocatalytic activity in photodegradation of organic compounds as antibiotics. The functionalization of the synthesized support material was achieved by impregnation from alcoholic solution. The obtained materials (MCM-41) and (Ti-MCM-41) were characterized by X-ray diffraction (XRD), scanning electron microscopy (S...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27274

ECO-FRIENDLY CORRUGATED BOARD AND SUSTAINABLE PACKAGING MANUFACTURING
Environmental Engineering and Management JournalVol. 16Nr. 3
The paper is focused on the sustainability of packages manufactured from corrugated board. The arguments proving that corrugated board is an eco-friendly material intended for goods packaging are discussed considering carbon footprint, water footprint, Life Cycle data released as a result of comprehensive analyses elaborated by specialized bodies and scientists. A “cradle-to-cradle” approach is promoted since corrugated board is fully recyclable, it is reusable and easy disposable. M...
Autori: Teofil Câmpean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27290

ENVIRONMENTAL CARE FOR ROMANIAN OIL PAINTINGS. TECHNICAL EXAMINATION OF DEGRADATION PHENOMENA IN CANVAS TEXTILES
Environmental Engineering and Management JournalVol. 16Nr. 3
Paintings signed by Nicolae Grigorescu and Stefan Luchian, exponents of Romanian Modern Art were selected for a technical study on easel painting canvases. Both the physical integrity and the appearance of the artefacts derive mainly from the strength of the canvas and the physical and chemical characteristics of the fibres imparting their response to deterioration. In order to determine a deterioration pattern for canvases subjected to environmental stress, a simulation on flax fibres samples w...
Autori: Maria Geba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27292

OPTIMIZATION OF GLASS FIBERS USED AS DISPERSE REINFORCEMENT OF EPOXY POLYMER CONCRETE WITH FLY ASH
Environmental Engineering and Management JournalVol. 16Nr. 5
Construction industry uses a huge quantity of traditional and modern building materials which generally are produced to satisfy different demands, such as: resistant and safety requirements, friendly with the environment, architectural aspects etc. Researches must solve any requirements related to materials properties and offer a large diversity from which the proper solution must be considered. For improving the mechanical properties of polymer concrete, the use of fibers of different types is ...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27306

VALORIZATION OF MUNICIPAL WASTEWATER TREATMENT PLANT SLUDGE AND AGRO-WASTE IN BUILDING MATERIALS WITH THERMAL INSULATION PROPERTIES
Environmental Engineering and Management JournalVol. 16Nr. 5
Considering the actual environmental issues, the waste management has become a major challenge in Europe and worldwide. Recycling the waste into sustainable products can be an alternative to landfill with positive effects on the costs and environmental pollution. In this respect, in the last years numerous studies and research emphasize the utilization of different type of waste to obtain materials for building applications. The aim of this paper is to assess the effect of using sewage sludge ge...
Autori: Petronela Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27315

NEW MESOPOROUS TITANIUM OXIDE-BASED PHOTOACTIVE MATERIALS FOR THE REMOVAL OF DYES FROM WASTEWATERS
Environmental Engineering and Management JournalVol. 16Nr. 4
The remarkable photocatalytic properties of titanium dioxide and the high adsorption capacity of the mesoporous materials were combined to obtain active photocatalysts for the decomposition of Rhodamine 6G dye. The mesoporous TiO2 was obtained by the controlled hydrolysis-condensation of titanium isopropoxide, using hexadecyl-trimethyl-ammonium bromide as template, followed by calcination to remove the organic matter. Subsequently, this sample was doped with sodium wolframate and platinum. T...
Autori: Doina Lutic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27325

HEAVY METALS AND GAMMA RADIOACTIVITY BIOACCUMULATIONIN Artemisia absinthium L. GROWN ON A WASTE DUMP
Environmental Engineering and Management JournalVol. 16Nr. 4
In the current context of industrialization, chemical and radioactive pollution is a concern for environmental protection and interference with human health. Care for environmental protection also includes vegetation that grows spontaneously in potentially contaminated places, thus avoiding illness among the population if consumed. The study area is located at 4.5km SSE from downtown Bacău City, Romania and is the result of the manufacture of H3PO4 through the wet method. In this study, t...
Autori: Mioara Săndulache Rachieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27331

CONTRIBUTION OF RETURNED PRODUCTS HANDLING SCENARIOS TO LIFE CYCLE IMPACTS – RESEARCH CASE OF WASHING MACHINE
Environmental Engineering and Management JournalVol. 16Nr. 4
The paper is addressing the issue of returns in products life cycle, focusing on a washing machine as an example of a long-life product with a complex life cycle and numerous options concerning its handling as a return. The objective of the paper is to compare different return product handling scenarios in terms of their economic and environmental aspects. The used materials and methods are the survey results of Polish manufacturing companies, an environmental life cycle assessment and simple co...
Autori: Tomasz Nitkiewicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27338

TECHNO-ECONOMIC ANALYSIS OF A BUTANOL RECOVERY PROCESS BASED ON GAS STRIPPING TECHNIQUE
Environmental Engineering and Management JournalVol. 16Nr. 4
Acetone-Butanol-Ethanol (ABE) industrial production by fermentation is strongly affected by the low concentration of solvent (<25 g/L) that affects the cost of the recovery process. To decrease the overall cost of the butanol production, alternative routes for the recovery have proposed in literature. This paper presents a techno-economic analysis of an innovative butanol recovery process from ABE fermentation broth based on gas stripping technique. The comparison with a recovery process bas...
Autori: Lucia Salemme
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27346

TURNING WHEAT STRAW IN A SUSTAINABLE RAW MATERIAL FOR PAPER INDUSTRY
Environmental Engineering and Management JournalVol. 16Nr. 4
Deforestation is a vital problem at global level, being one of the main causes of climate change. Volume of wood used in construction, furniture and pulp and paper industries increases year by year. Stopping the decrease of forests surface is of imperative importance from the point of view of sustainability. Pulp and paper industry faces with severe lack of pulpwood and for this reason other raw materials are taken into consideration. Chemical pulp can be partially replaced with recovered paper ...
Autori: Adrian Cătălin Puiţel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27348

NEW ASPECTS REGARDING IGNITION SENSITIVITY OF AIR-METHANE MIXTURES
Environmental Engineering and Management JournalVol. 16Nr. 6
In the economic activities related to combustible substances, it may occur possible emissions and explosive atmospheres. Some typical examples include industrial activities in general, firedamp mines and power generation in particular. The aim of this paper is to accentuate hidden aspects regarding ignition sensitivity of moisturized air methane mixtures. Therefore, the first objective of the paper is to emphasize the air humidity as an extra factor needed to be considered in relation to igniti...
Autori: Marius Darie
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27351

DECISION SUPPORT SYSTEM FOR MANAGING ELECTRICAL EQUIPMENT USED IN HAZARDOUS ATMOSPHERES
Environmental Engineering and Management JournalVol. 16Nr. 6
Areas within which could arise explosive atmospheres having high concentrations, therefore requiring special precautions so as to guard the health and safety of concerned employees, are considered to be dangerous. If the electrical equipment used in these hazardous locations is not properly selected and installed for operating in explosive atmospheres, they are likely to generate an ignition and to result in explosion type events with significant environmental and material damages and, moreover...
Autori: Vlad Mihai Păsculescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27360

MICROELEMENTS INFLUENCE ON COAL OXIDATION AND THE ENVIRONMENTAL POLLUTION IMPLICATIONS
Environmental Engineering and Management JournalVol. 16Nr. 6
The spontaneous combustion of coal or self-oxidation is a phenomenon encountered both in underground mines and coal deposits on the surface, which results from heating the carbonaceous materials by slow oxidation that may occur only through the passage of air (created by air depression). Coal oxidation process generates oxidation products which are also an environmental problem. If we consider the CO2 or CO, their composition depends on the coal properties and other factors from the process. Th...
Autori: Maria Prodan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27363

CONSIDERATIONS ON THE METHOD FOR SELF ASSESSMENT OF SAFETY AT WORK
Environmental Engineering and Management JournalVol. 16Nr. 6
Application of the occupational safety self-assessment starts with a document containing dashboard, description of the company (name, location, object activity, organization etc.), description of the work detailing with its components and a brief description of the method of self-evaluation. It continues with a Microsoft Excel document, that is the actual application method and a second document presenting conclusions and prioritizing proposals that may lead to the execution of the protection an...
Autori: Costica Bejinariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27370

A CRITICAL REVIEW OF DRILLING WASTE MANAGEMENT TOWARDS SUSTAINABLE SOLUTIONS
Environmental Engineering and Management JournalVol. 16Nr. 7
Drilling waste management for oil and gas industry involves collection, transportation, processing, recycling, disposal, and monitoring of waste materials in order to reduce their effects on health and environment. In the Exploration and Production industry, environmental concerns have made effective management of drilling waste at well sites a great priority. Effective waste management is thus a key element in a successful drilling project. The industry therefore relies on effective expertise a...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27375

OPTIMIZATION OF SOLID STATE FERMENTATION PROCESS FOR PROTEIN ENRICHMENT OF POTATO STARCH RESIDUE WITH MIXED STRAINS
Environmental Engineering and Management JournalVol. 16Nr. 7
This study was to optimize the fermentation process for protein enrichment of potato starch residue (PSR) by solid state fermentation with mixed strains. Three single-factor experiments were conducted to optimize the fermentation conditions, and a Plackett-Burman design followed by a central composite design of response surface methodology was investigated to optimize the medium constituents. The optimal fermentation conditions were fermentation temperature 28°C, fermentation period 72 h and...
Autori: Heng Lei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27380

CHEMICAL, MECHANICAL AND THERMAL PROPERTIES OF MORTAR COMPOSITES CONTAINING WASTE PET
Environmental Engineering and Management JournalVol. 16Nr. 7
The main objective of this study was to investigate the potential utilization of polyethylene terephthalate PET waste in cementitious matrix, as substituent to cement, to develop lightweight construction materials and for preventing chemical attacks or repairing various reinforced concrete structures. Composites containing different amounts of PET particles, as partial replacement to cement by weight, were characterized by destructive and non-destructive testing. So, the thermal conductivity, ul...
Autori: Ahmed Soufiane Benosman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27381

Material & Energy Recovery and Sustainable Development ECOMONDO 2016
Environmental Engineering and Management JournalVol. 16Nr. 8
The papers collected in this Special Issue of Environmental Engineering and Management Journal were presented as lectures or posters at the scientific and technical conferences hosted by Ecomondo 2016 held in Rimini, Italy, 8–11 November, 2016 (http://en.ecomondo.com). ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27400

EVALUATION OF DIFFERENT STRATEGIES FOR END-OF-LIFE LIQUID CRYSTAL DISPLAYS (LCD) MANAGEMENT
Environmental Engineering and Management JournalVol. 16Nr. 8
End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

PREPARATION AND CHARACTERIZATION OF NATURAL GLUES WITH CARBON NANOTUBES
Environmental Engineering and Management JournalVol. 16Nr. 8
The data presented in this work has been obtained from experimental research aiming towards the usage of natural resources of the National Park of Sila in Calabria, Southern Italy. Such resources are: “Laricio” pine resin, beeswax, mineral inert and charcoal to make natural glues. Furthermore, research has been done to find out if by using small quantities of carbon nanotubes, the strength of adhesion of prepared glues improves. Raw materials were characterized by physico–ch...
Autori: Pierantonio De Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27402

SMART GROUND PROJECT: A NEW APPROACH TO DATA ACCESSIBILITY AND COLLECTION FOR RAW MATERIALS AND SECONDARY RAW MATERIALS IN EUROPE
Environmental Engineering and Management JournalVol. 16Nr. 8
Steady Raw Materials (RM) supply is essential for the EU economy and increasingly under pressure to sustain the businesses and industries demand. The supply of RM is not only a matter of availability of primary but also of secondary raw materials (SRM). In fact a great amount of waste can be regained as practical and valuable SRM by enhancing the recovery processes from industrial, mining and municipal landfill sites, especially if we consider that Europe is highly dependent on the imports of...
Autori: Giovanna Antonella Dino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27403

VALORIZATION OF AGRO-INDUSTRIAL WASTES IN LIGHTWEIGHT AGGREGATES FOR AGRONOMIC USE: PRELIMINARY STUDY
Environmental Engineering and Management JournalVol. 16Nr. 8
This research was focused on the valorization of agro industrial waste/by products available in the local industry with the kilometer zero (km 0) concept, as a replacement of virgin raw materials (clay) to elaborate lightweight aggregates (LWAS). The alternative raw materials were employed as pore forming agent, in order to reduce sintering temperature and energy consumption of the furnace. The three technical nutrients studied were provided for local food industries: sludge from wastewater trea...
Autori: Romina D. Farias
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27405

EFFECT OF pH IN THE SYNTHESIS OF ORGANO-CLAYS FOR RARE EARTHS REMOVAL
Environmental Engineering and Management JournalVol. 16Nr. 8
Two montmorillonitic clays were modified with N-(methoxy-polyethylene glycol) ethylene diamine and tested as sorbents for removal of Rare Earths (REs) from aqueous solutions. Lanthanum was chosen as representing element of REs family and adsorption tests were performed with the aim of selecting a system with good uptake efficiency for the pollutant abatement in wastewaters. The effects of pH were studied and the properties of the obtained final materials were evaluated with simple model syst...
Autori: Elena Maria Iannicelli-Zubiani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27408

PRELIMINARY ANALYSES ON AN ALGAE-BASED WATER SCRUBBER FOR SYNGAS CLEANSING
Environmental Engineering and Management JournalVol. 16Nr. 8
Common issues of the gasification systems relate to filtering apparatus. Dry filtering processes are simple and reliable. However, the filtering material defines the maximum and minimum temperature at which the filter can operate properly. In addition, dry filtration is not effective on light tar compounds (i.e. benzene and toluene) or ammonia compounds. On the other hand, despite being very efficient, wet filters drop the gas temperature below the line of condensation of tar, ammonia and ste...
Autori: Giulio Allesina
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27412

ENVIRONMENTAL IMPACT OF SECOND-GENERATION SUGARS PRODUCTION FROM CARDOON RESIDUES
Environmental Engineering and Management JournalVol. 16Nr. 8
Biofuels and biochemicals are currently centre stage in the on-going scientific and political debate. The prevalent opinion is that their use can significantly reduce the greenhouse gases (GHGs) emissions and primary energy demand along their whole value chain. This study aims at evaluating the environmental impact in terms of GHGs related to carbon dioxide (CO2) of secondgeneration sugars (2GSs) production from cardoon residual biomass. Cardoon is a favourable crop in Mediterranean areas for...
Autori: Maria Teresa Petrone
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27413

CO-DESIGN FOR A CIRCULAR APPROACH IN GREEN TECHNOLOGIES: ADAPTATION OF REUSED BUILDING MATERIAL AS GROWING SUBSTRATE FOR SOILLESS CULTIVATION OF LETTUCE (Lactuca sativa var. capitata)
Environmental Engineering and Management JournalVol. 16Nr. 8
Improving the awareness of the responsibility of our actions is the basis of achieving the ambitious aim of waste management and prevention established by the European Waste Framework Directive 2008/98/CE and the most recent Circular Economy Package. Circular Economy is connected both to improve manufacturing technologies and also educate people towards responsible consumption and waste reduction. Due to its educational and institutional role, universities provide a context to rethink not on...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27414

CIRCULAR ECONOMY STRATEGIES FOR ELECTRIC AND ELECTRONIC EQUIPMENT: A FUZZY COGNITIVE MAP
Environmental Engineering and Management JournalVol. 16Nr. 8
A worldwide trend is leading the international community to explore the possible paths for the transition from a linear to a circular economic model. Recent studies identified the main enabling factors to facilitate this transition, among which closed loop logistics models and new service-based and function-oriented business models play a significant role. The diffusion of new business models relating to the use of a product rather than its ownership can indeed reduce material consumption and th...
Autori: Maria Grazia Gnoni
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27418

THE SMART-GREEN RECYCLING
Environmental Engineering and Management JournalVol. 16Nr. 8
This paper describes shortly some outcomes of a project aiming to apply a scientific research directly to industry, passing through a system that wants to promote an economic "Pact" in relation to the new construction and renovation projects of energy, according to its fundamental guidelines of the moment: renewable energy and energy efficiency. The key point is to produce energy from recycled materials that become functional to dwellings (from the garden shed to furnishings, etc.),...
Autori: Marco Santarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27421

HIGH YIELD OF ETHANOL FROM WASTE APPLE JUICE by IMMOBILIZED CELLS OF Saccharomyces cerevisiae S-3S ON SUGAR CANE BAGASSE IN FED BATCH SYSTEM
Environmental Engineering and Management JournalVol. 16Nr. 9
The aim of present study was the effective utilization of waste apple for high yield of ethanol using immobilized cells of Saccharomyces cerevisiae S-3S through fed-batch fermentation. Low cost biomaterial was also developed for immobilization. Immobilization was carried out on different inert supports (agar-agar, k-carrageenan, Ca-alginate, sugar cane bagasse and apple bagasse). The results revealed that immobilized cells of S. cerevisiae S-3S gave high yield of ethanol as compared to free c...
Autori: Arifa Tahir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27425

ADSORPTION CHARACTERISTICS OF ALGINATE COMPOUNDS FOR REMOVAL OF CERIUM IONS FROM AQUEOUS SOLUTION
Environmental Engineering and Management JournalVol. 16Nr. 9
Removal of the heavy metal ions from water disposals remains a widespread problem due to their adverse influence on public health. The most harmful materials are the products of nuclear fission called radioisotopes such as cerium ions. Cerium barely interacts with adsorbent materials, therefore the new substances capable to bind cerium are of great interest. Ca and Na alginate samples were incubated in Ce3+ solutions; adsorption capacity was measured and the results were evaluated using Langm...
Autori: Maxim Khotimchenko
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27435

PREDICTING ACID ROCK DRAINAGE FROM A NICKEL MINE WASTE PILE AND METAL LEVELS IN SURROUNDING SOILS
Environmental Engineering and Management JournalVol. 16Nr. 9
Acid-base accounting was applied to evaluate the acid generating potential of waste rock dumps of different ages at a nickel mine in Zimbabwe. Metal concentrations in soils surrounding the dumps were also assessed. The net neutralising potential (NNP) of waste rock samples was derived from the maximum potential acidity (MPA) and the neutralising potential (NP). MPA and NP were determined based on total sulphur and acid consumption respectively. Waste rock dumps (WRDs) had more (p<0.05) su...
Autori: Artwell Kanda
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27437

STUDY REGARDING THE OPTIMAL CONDITIONS FOR REDUCING SUGARS PRODUCTION FROM WHEAT STRAWS BY ENZYMATIC HYDROLYSIS
Environmental Engineering and Management JournalVol. 16Nr. 10
The purpose of this paper is to present the results regarding the obtaining of reducing sugars at the enzymatic hydrolysis of the lignocellulosic material, wheat straws. For these, the lignocellulosic material was submitted to a preliminary pretreatment for destruction of the cellulose crystalline structure and to increase the material's susceptibility to the enzymatic attack. The preliminary pretreated material with diluted acid (0.5%-4%) or with water at different temperatures (120-170&ord...
Autori: Eufrozina Albu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27463

STUDY ON THE USE OF GEOTEXTILES FOR ENSURING DRAINAGE CONDITIONS WITHIN INDUSTRIAL FLY ASH PONDS
Environmental Engineering and Management JournalVol. 16Nr. 11
Fly ash ponds are dangerous for the environment because the fly ash can cause multiple harmful effects. This is cause for major concern for researchers and industry people alike. The rise of the water table level inside the ash structure may cause a loss of stability over time, with adverse effects on the environment. Therefore it is necessary to adopt efficient solutions to ensure the stability of ash ponds and rapid measures that can be applied. The use of geosynthetic materials has proven to ...
Autori: Lidia Niculiţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27483

ACTIVE ELECTRODE SHAPE EFFECT ON THE CORONA DISCHARGE IN AN ELECTROSTATIC PRECIPITATOR
Environmental Engineering and Management JournalVol. 16Nr. 11
An experimental study of the wires-two plates is presented in this paper. The principal running of these types of electrostatic precipitators is based on the corona discharge on which depend their performances. The factors affecting corona formation on wire - to- plate gaps are investigated experimentally. There are many factors affecting such corona formation. The investigated factors were the interspace between the two wires, gap length between the wire and the plate, ambient temperature, r...
Autori: Nouri Hamou
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27485

PREPARATION AND SEM-EDX-XRD CHARACTERIZATION OF MAGNETIC ZEOLITIC MATERIALS OBTAINED FROM COAL FLY ASH
Environmental Engineering and Management JournalVol. 16Nr. 11
A low-cost magnetic zeolitic material was synthesized from coal fly ash by means of a new, simple method involving alkaline hydrothermal zeolitization of fly ash (FA) followed by low-intensity wet magnetic separation. Scanning electron microscopy with energy-dispersive X-ray analysis was applied to characterize the composition, microstructure, and morphology of the material. The mineral and synthetic zeolite phases were identified by powder X-ray diffraction. The obtained magnetic zeolitic m...
Autori: Annie Shoumkova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27486

EXPERIMENTAL DESIGN FOR THE OPTIMIZATION OF COPPER BIOSORPTION BY IMMOBILIZED NANOSCALE Lentinus edodes
Environmental Engineering and Management JournalVol. 16Nr. 11
An experimental design methodology was applied to study the copper removal from aqueous solutions by immobilized nanoscale Lentinus edodes. The effect of the various variables (biomass loading, initial metal ions concentration, PH, contact time, agitation speed and temperature) were studied in the batch experiment. The results showed that pH, contact time and agitation speed were the most significant variables on biosorption of copper ions determined by Minimum Run Equireplicated Res V Design...
Autori: Rong Chen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27487

IMPROVEMENT OF SOME POST-CONSUMER POLYPROPYLENE (rPP) BY MELT MODIFICATION WITH STYRENE-DIENE BLOCK COPOLYMERS
Environmental Engineering and Management JournalVol. 16Nr. 11
Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processi...
Autori: Maria Râpă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27493

A COMPARISON STUDY OF WATER FILTERING MATERIALS MADE FROM EXTRACTED PALM FRUIT FIBRE AND PALM KERNEL SHELL
Environmental Engineering and Management JournalVol. 16Nr. 12
The use of activated carbon as filter media for water has gained research attractions over the years. A comparison study of granular activated carbon (GAC) of extracted palm fruit fibres (EPF), palm kernel shell (PKS) with existing filter material (EFM) commercially produced activated carbon for water filtration has been conducted. Palm kernel shells and extracted palm fruit fibres from palm oil mill wastes were processed to form activated carbon by chemical activation process. Scanning Elect...
Autori: Jamaliah Idris
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27498

OPTIMIZATION OF IMPORTANT PROCESS PARAMETERS FOR THE REMOVAL OF Cr(VI) BY A MODIFIED WASTE MATERIAL
Environmental Engineering and Management JournalVol. 16Nr. 12
This paper highlights the utility of rice husk ash for the adsorption of Cr(VI) ions from aqueous solutions. Rice husk ash (RHA) is produced when rice husk is burnt for various purposes. Application of Treated Rice Husk Ash (TRHA) as an adsorbent for the removal of Cr(VI) from aqueous solutions has been investigated. For this purpose, RHA was thermally treated. RHA and treated RHA (TRHA) were characterized by XRD, SEM and FTIR to investigate the effect of treatment on the nature and surface char...
Autori: Varsha Srivastava
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27504

COMPARATIVE ANALYSIS OF THERMAL STABILITY OF BUILDING INSULATION MATERIALS
Environmental Engineering and Management JournalVol. 16Nr. 12
This study undertakes to characterize through thermal analysis in dynamic conditions a wide range of building materials used for various types of insulation and presents for the first time a comparative analysis of their thermal stability. To this effect, the dynamic thermal analysis TG/DTG was applied. The results show a degradation resulting in one, two or three stages after a complex mechanism, with different mass loss, depending on the structure and atmosphere in which the thermal decomposit...
Autori: Andreea-Camelia Sprânceană
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27514

A STUDY ON SOME MECHANICAL PROPERTIES OF BIO-COMPOSITE MATERIALS WITH A DAMMAR-BASED MATRIX
Environmental Engineering and Management JournalVol. 16Nr. 12
This study focuses on some mechanical properties resulted from the tensile testing of a set of green composites with a Dammar-based matrix and reinforcement material of silk, flax, cotton and hemp fabrics. To be precise, we have ascertained the characteristic curve, the resistance to and the elongation at fraction, as well as the modulus of elasticity for each set of samples from these composites and for a set of bioresin samples. With the help of an Electronic Scanning Microscope we captured im...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27516

INVESTIGATING EFFECTS OF PRODEGRADANT CONTENT ON SELECTED PROPERTIES OF POLYMER COMPOSITE MATERIALS
Environmental Engineering and Management JournalVol. 16Nr. 12
This paper introduces basic information on the biodegradation of polymers as well as the mechanisms of degradation and factors influencing this process. This paper describes prodegradant additives that induce decomposition of polymers to biodegradable compounds with regard to additives causing oxo-biodegradation. Based on the results of experiments conducted for molded pieces made of polypropylene and extrudates made of low density polyethylene with a d2w prodegradant additive, dependences betwe...
Autori: Tomasz Jachowicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27519

EVALUATION OF COPPER AND LEAD BIOSORPTION ON MODIFIED Azolla pinnata (R. Br.)
Environmental Engineering and Management JournalVol. 17Nr. 1
This paper investigates the macrophyte Azolla pinnata modified with sodium hydroxide, as a bioadsorbent for Cu2+ and Pb2+ ions in synthetic solutions. Biomaterial characterization was performed using Scanning Electronic Microscopy (SEM); Energy- Dispersive X-Ray Spectroscopy (EDX); Fourier Transform Infra-red (FTIR) spectroscopy techniques and through the blocking of carboxylic and sulfonic functional groups. Kinetics of the process has highlighted a quick and efficient adsorption, even in low ...
Autori: Arielle Barros
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27532

MODEL FOR REGIONAL MANAGEMENT OF ELECTRICAL AND ELECTRONIC WASTE (WEEE) FLOWS
Environmental Engineering and Management JournalVol. 17Nr. 1
The tenacious technological development at latter decades has conditioned the growth of electrical and electronic equipment (EEE) amount and generation of their waste. That is a global heterogeneous problem including different stakeholders and various aspects: environmental, economic, social and technological. The regional electrical and electronic waste (WEEE) management systems (MS) are developed in order to solve this problem. The implementation of WEEE recycling and collection targets is not...
Autori: Inga Gurauskienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27537

CASTOR LEAF POWDER AS A BIOSORBENT FOR Cu(II) REMOVAL AND PRECONCENTRATION OF NATURAL WATER SAMPLES
Environmental Engineering and Management JournalVol. 17Nr. 1
This paper describes the preparation and use of a low cost biosorbent made of castor leaves for the extraction of Cu(II) from an aqueous medium. The biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR), surface area and pore diameter measurements. The results showed absorption bands of carboxylic and amide groups at 1738 and 1540 cm-1, respectively, and the measured surface area was 1.3728 ± 0.0160 m2 g-1, with predominance of microporous < 10.51 Å. ...
Autori: Milene S. Pereira
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27540

MATHEMATICAL MODEL FOR PARTICLE MOTION APPLIED ON A MANURE SPREADING APPARATUS USED IN ENVIRONMENTALLY FRIENDLY TECHNOLOGY
Environmental Engineering and Management JournalVol. 17Nr. 1
It is acknowledged that organic fertilizers and wastes, such as animal slurries/manure from intensive farm enterprise, sewage sludge, poultry litter are and will continue to be spread on agricultural land and provide beneficial nutrients to crops. However, many of these materials which are also potentially polluting if not properly managed can pose a risk to groundwater and surface water quality. Generally, their distribution on the soil is performed with specialized machines to reduce the risk...
Autori: Vasilica Ştefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27545

PROMOTING EFFECT OF CERIA ON THE CATALYTIC ACTIVITY OF CeO2-ZnO POLYCRYSTALLINE MATERIALS
Environmental Engineering and Management JournalVol. 17Nr. 4
A polycrystalline CeO2-ZnO catalyst was prepared by using a hydrothermal procedure in order to improve the structural properties. This polycrystalline material was then used to remove organic pollutants from aqueous solutions by the means of photocatalysis. The structural, morphological and optical properties of as-prepared materials were characterized by several techniques, such as UV-visible spectroscopy, SEM, FTIR, XRD. The SEM analysis shows that the crystallite size sample varies in the ran...
Autori: Nicolae Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27550

KINETICS AND EQUILIBRIUM STUDIES OF 4-CHLOROPHENOL ADSORPTION ONTO MAGNETIC ACTIVATED CARBON COMPOSITES
Environmental Engineering and Management JournalVol. 17Nr. 4
Among the organic pollutants, the chlorinated phenols represent an important class of compounds having a stable world market of ca. 100 kt per year. Due to their aryl structure and presence of the chlorine atom, chlorinated phenols are exceptionally recalcitrant toward chemical reactions aimed at their reduction. Adsorption from liquid phase has received special interest due to its flexibility and simplicity in operation. Especially adsorption using activated carbon (AC) has been recognized by t...
Autori: Marius Sebastian Secula
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27552

EVALUATION OF PHENOLIC COMPOUNDS CONTENT IN GRAPE SEEDS
Environmental Engineering and Management JournalVol. 17Nr. 4
There is an increasing interest in the food industry and in protective health care for the expansion of natural antioxidants from plant materials. The solid wastes generated by the winemaking industry represent about 30% of the material used and it consists mainly of grape pomace (containing seeds, pulp, stem and skin). It is well known that high quantities of valuable compounds like dietary fibre, oils from the seeds, anthocyanins and phenolic compounds still remain within the grape marc. The p...
Autori: Valeriu V. Cotea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27553

MASS TRANSFER IN SOLID-LIQUID EXTRACTION AT HIGH SOLUTE CONCENTRATIONS
Environmental Engineering and Management JournalVol. 17Nr. 4
The solid-liquid extraction process and some of its influencing factors such as solid-liquid ratio, temperature and salt initial amount have been investigated. Also, mathematical modeling for mass transfer coefficients calculation was applied. An inert porous solid material (coal), impregnated with 10% and 20% mass NaCl or 15% and 30% mass CaCl2, was used. The leaching was conducted in a fixed bed column, in laminar flow. The CaCl2 impregnated samples were investigated in a column with a height...
Autori: Marcel Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27557

ANTIBACTERIAL ACTIVITIES OF BEECH BARK (Fagus sylvatica L.) POLYPHENOLIC EXTRACT
Environmental Engineering and Management JournalVol. 17Nr. 4
The study provides information about separation and identification of natural bioactive compounds from beech (Fagus sylvatica L.) bark with potential therapeutic applications such as antibacterial activity against human pathogens. Beech is a common material used in the wood industry, but its bark is separated from the wood and is considered a by-product. In this study, natural compounds with biological activity were obtained from beech bark by hot water extraction. The high-performance liquid ch...
Autori: Corneliu Tănase
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27561

PREPARATION AND CHARACTERIZATION OF NANOCOMPOSITE MATERIAL BASED ON TiO2-Ag FOR ENVIRONMENTAL APPLICATIONS
Environmental Engineering and Management JournalVol. 17Nr. 4
A simple and efficient method for preparing Ag-doped TiO2 nanoparticles was successfully developed, by associating the sol-gel method and the impregnation-reduction. While titanium dioxide is one of the most used solids as photocatalyst, silver is particularly interesting for applications in biological and chemical detection and for its antibacterial properties. Moreover, in photocatalysis silver acts as an electron sink and donor in capturing the photogenerated electrons. The structural and mor...
Autori: Catalina Nutescu Duduman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27566

ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUNICIPAL SOLID WASTE IN THE KOŠICE REGION OF THE SLOVAK REPUBLIC
Environmental Engineering and Management JournalVol. 17Nr. 4
This work focuses on the analysis of material composition of mixed municipal solid waste (MSW) in the city of Košice, the second largest city in Slovakia, and in the village of Poproč, which is representative of the region. The paper describes the characteristics of the monitored localities, the methodology and the original evaluation procedure. The analysis of the mixed MSW composition in Poproč was performed in 2009-2010, and in Košice in 2011. In both cases, the analys...
Autori: Takáčová Zita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27570

Environmental engineering and Management Journal No. 4
Vol. 1Nr. 11
• Environmental engineering and Management Journal No. 4    • AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART II – USER INTERFACE AND FIELD VALIDATION    • COST-EFFECTIVENESS OF OPTIMIZING CONCENTRATED FEED BLENDS TO DECREASE GREENHOUSE GAS EMISSIONS    • FATE AND BIODEGRADATION OF ESTROGENS IN THE ENVIRONMENT AND ENGINEERING SYSTEMS – A REVIEW    • ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27577

Environmental engineering and Management Journal No. 4
Environmental Engineering and Management JournalVol. 17Nr. 4
• Environmental engineering and Management Journal No. 4    • AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART II – USER INTERFACE AND FIELD VALIDATION    • COST-EFFECTIVENESS OF OPTIMIZING CONCENTRATED FEED BLENDS TO DECREASE GREENHOUSE GAS EMISSIONS    • FATE AND BIODEGRADATION OF ESTROGENS IN THE ENVIRONMENT AND ENGINEERING SYSTEMS – A REVIEW    • ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27576

BIOGAS PRODUCTION FROM CORN BIOETHANOL WHOLE STILLAGE: EVALUATION OF TWO DIFFERENT INOCULA
Environmental Engineering and Management JournalVol. 17Nr. 5
According to EU Strategy for the Baltic Sea Region, Lithuania obligates to ensure sustainable growth, gain and maintain good condition of marine environment until 2020. In accordance with the sustainability approach, every potential cost and energy cutting as well as social sustainability measure for wastewater treatment should be explored. Nonetheless, Lithuania wastewater treatment plants (WWTP) in the sustainability context have never been evaluated before. A comprehensive set of 30 sustainab...
Autori: László Gyenge
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27578

RECOVERY OF LiMn1/3Ni1/3Co1/3O2 FROM SPENT LITHIUM-ION BATTERY USING A SPECIALLY DESIGNED DEVICE
Environmental Engineering and Management JournalVol. 17Nr. 5
Recycling of battery components for natural resources sustainability and consumer products has become an important endeavor that demands continuity through effective processes. In compliance with the need for waste management, LiMn1/3Ni1/3Co1/3O2 in the positive electrode of spent lithium-ion batteries has been recovered using specially designed device, consisting of two compartments separated with a plastic sieve of pore size 0.2mm. The upper compartment equipped with a mechanical stirrer conta...
Autori: Oluwatosin Emmanuel Bankolehttp://www.ecozone.ro/reviste.php?RID=27581

SUSTAINABILITY ASSESSMENT OF THE WASTEWATER TREATMENT PLANT IN THE BALTIC SEA REGION: A CASE STUDY IN LITHUANIA
Environmental Engineering and Management JournalVol. 17Nr. 5
According to EU Strategy for the Baltic Sea Region, Lithuania has to ensure sustainable growth, gain and maintain good condition of marine environment until 2020. In accordance with the sustainability approach, every potential cost and energy cutting as well as social sustainability measure for wastewater treatment should be explored. Nonetheless, Lithuania wastewater treatment plants (WWTP) in the sustainability context have never been evaluated before. A comprehensive set of 30 sustainable dev...
Autori: Jolanta Dvarionienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27583

WASTE-TO-WASTE MANAGEMENT AND RESOURCE CONSERVATION AND RECYCLING
Environmental Engineering and Management JournalVol. 17Nr. 5
Social upgradation results more postconsumer glass and plastic waste and continuously demands newer techniques for their management. This research proposes a new waste-to-waste management strategy by using waste glass for polyolefin degradation. For this purpose, waste glass is activated by mechanochemical treatment and resultant material is used for the thermal pyrolysis of polyolefin. Certain improvement in the product quality is achieved by selectivity towards more alkane fraction. ...
Autori: Pooja Singh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27586

POWDERED MARBLE WASTES REUSE FOR CADMIUM REMOVAL FROM AQUEOUS SOLUTIONS UNDER DYNAMIC CONDITIONS
Environmental Engineering and Management JournalVol. 17Nr. 5
A factorial design analysis was performed in order to determine the significant factors influencing cadmium removal from aqueous solutions by powdered marble wastes (PMW), using a continuous stirring tank reactor (CSTR) system. Investigated factors were initial cadmium aqueous concentration (5-30 mg L-1), PMW dosage (5-15 g L-1) and flow rate (20-40 mL min-1). Results showed that the cadmium aqueous concentration and PMW dosage were the most influencing factors on metal removal from synthetic aq...
Autori: Ammar Mlayah
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27590

IMPROVING RUNWAY STRIP PERFORMANCE TO FULFILL INTERNATIONAL REQUIREMENTS THROUGH ECO-EFFICIENT SOIL TREATMENTS: CASE STUDY OF A MAJOR ITALIAN AIRPORT
Environmental Engineering and Management JournalVol. 17Nr. 6
The paper presents a case study of a significant intervention conducted on a major Italian airport for improving the structural and functional properties of the runway safety STRIP in order to fulfill specific national and international standards. The STRIP had to accomplish strict requirements in terms of the maximum longitudinal and transversal terrain slope and minimum values of bearing capacity; in particular, soil bearing capacity was identified as the main lack and thus the most urgent ac...
Autori: Maurizio Crispino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27603

Pb (ΙΙ) REMOVAL FROM AQUEOUS SOLUTION BY ADSORPTION ON ACTIVATED CARBON FROM KIWI PEEL
Environmental Engineering and Management JournalVol. 17Nr. 6
A new low-cost activated carbon was developed from kiwi peel for removing Pb(II) from aqueous solution. The adsorbent characteristics were determined by different analyses such as BET, FTIR and SEM. The adsorbent demonstrated remarkable characteristics such as high surface area (306.18 m2.g-1) and large total pore volume (0.4810 cm3.g-1). The effect of pH, contact time, initial concentration, shaking rate and adsorbent dosage on the Pb removal efficiency was investigated. It was found that the o...
Autori: Mostafa Rahimnejad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27605

CARBON EMISSION MANAGEMENT FOR GREENING SUPPLY CHAINS AT THE OPERATIONAL LEVEL
Environmental Engineering and Management JournalVol. 17Nr. 6
Increased concern about global warming in today’s world has led to the legislation of regulations that seek to gradually reduce the amount of greenhouse gases emitted by industrial sectors and along their supply chains. This study focuses on the amount of carbon emitted in a two-echelon supply chain in which one supplier delivers a single product to a group of retailers and attempts are made to integrate and coordinate its different members. A mixed integer programming model is thus develo...
Autori: Seyed Hesameddin Anvar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27610

EFFECT OF MOLASSES ADDITION AS BIODEGRADABLE MATERIAL ON PHENOL REMOVAL UNDER ANAEROBIC CONDITIONS
Environmental Engineering and Management JournalVol. 17Nr. 6
The link between the concentration of biodegradable organic matter and the rate of phenol removal in anaerobic conditions was examined in this work. This study was undertaken using a laboratory scale anaerobic stabilization pond and five closed reactors at two retention times, 2 and 5 days. The initial concentration of phenol and soluble COD decreased in the anaerobic pond effluent and the reactors with increasing hydraulic retention time; 98.6 % phenol removal was observed in reactors after 50 ...
Autori: Ali Almasi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27623

MINERALOGY AND GEOCHEMICAL DISTRIBUTION OF HEAVY METALS FOR THE FAGUL CETĂȚII TAILINGS, ROMANIA
Environmental Engineering and Management JournalVol. 17Nr. 6
This study was conducted on samples taken from the “Fagul Cetății – Iazul nr. 4” tailings pond in the Eastern Carpathians, Romania and is focused on exploring the way in which heavy metals from sulphide rich material are spatially distributed in relation to the geochemical conditions. For comparison, concentrated ore samples from the same area, genetically linked to the Tulgheș lithogroup were also analysed. The mineralogical and chemical composition of the sampl...
Autori: Sorin-Ionuț Balaban
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27626

Environmental engineering and Management Journal No. 6
Environmental Engineering and Management JournalVol. 17Nr. 6
FLUCTUATION OF RIVER NETWORK WATER ENVIRONMENTAL CARRYING CAPACITY IN A COMPLICATED RIVER-LAKE SYSTEM    • MINERALOGY AND GEOCHEMICAL DISTRIBUTION OF HEAVY METALS FOR THE FAGUL CETĂȚII TAILINGS, ROMANIA    • ACCUMULATION AND AVAILABILITY OF TRACE ELEMENTS FROM SOIL INTO ORIENTAL TOBACCO GROWN IN MACEDONIA    • OLFACTORY EFFECT ON LANDSCAPE PREFERENCE    • EFFECT OF MOLASSES ADDITION AS BIODEGRADABLE MATERIAL ON PHENOL REMO...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27628

EFFECTS OF OZONATION ON THE ULTRAFILTRATION OF MEAT INDUSTRY WASTEWATER
Environmental Engineering and Management JournalVol. 17Nr. 2
Water is currently becoming a strategically important material, and the importance of water and wastewater treatment technologies is therefore increasing. Wastewater from the food industry has many special features originating from its high organic matter content. Meat industry wastewater additionally has a high fat content. We investigated the effects of ultrafiltration and ozonation, individually and in combination, for the treatment of meat industrial wastewater. Ozone gas was generated from ...
Autori: Cecilia Hodúr
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27631

ELUCIDATING THE EFFECTS OF NANOSILICA ON THE CHARACTERISTICS OF ALKALI-ACTIVATED THIN-FILM TRANSISTOR LIQUID-CRYSTAL DISPLAY WASTE GLASS
Environmental Engineering and Management JournalVol. 17Nr. 2
Thin-film transistor liquid-crystal display (TFT-LCD) waste glass can be used as a raw material for producing geopolymers, because it contains large amounts of silicon and aluminum in its amorphous structure. The setting time and compressive strength were evaluated to determine the quality of the geopolymer product with various amounts of nano-SiO2 (0%–3%) and TFT-LCD waste glass replacement (0% - 40%). The microstructures of the samples were characterized using mercury intrusion porosimet...
Autori: Kang Gao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27634

CLOSING THE MATERIALS CYCLE IN PYROMETALLURGICAL PRODUCTION OF LEAD FROM WASTE FRACTIONS: HYDROMETALLURGICAL PURIFICATION OF IRON CONTAINING WASTE IN VIEW OF RECYCLING
Environmental Engineering and Management JournalVol. 17Nr. 2
Pyrometallurgical recycling of lead from spent batteries entails secondary waste fractions generated in the blast furnace as iron stone and lead slags. For further purification of both fractions, hydrometallurgic processing is proposed. This paper focuses on purification of iron stone, in view of recovering metals (mainly lead) and of producing decontaminated iron stone fit for further recycling. The results demonstrate that iron stone is mainly composed of iron and lead; copper, zinc and antimo...
Autori: Bart Van der Bruggen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27642

EVALUATION OF POST-CONSUMER MIXED POLYOLEFINES AND THEIR INJECTION MOULDED BLENDS WITH VIRGIN POLYETHYLENE
Environmental Engineering and Management JournalVol. 17Nr. 2
Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

REUSE OF MAGNESIUM WASTES IN HYDROTHERMAL SYNTHESIS OF A MAGNESIUM BORATE MINERAL: ADMONTITE
Environmental Engineering and Management JournalVol. 17Nr. 3
Magnesium wastes are among the gradually ascending and therefore challenging metal wastes, which are produced by many industrial activities. The purpose of this study is the usage of magnesium waste, a raw material in magnesium borate production by hydrothermal synthesis. Boron sources (boric acid (H3BO3) and boron oxide (B2O3)) react with magnesium wastes in order to synthesize the magnesium borate mineral of admontite (MgO(B2O3)3ꞏ7(H2O)). In addition to the synthesis from waste magne...
Autori: Azmi Seyhun Kipcak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27657

RECOVERY OF SILICON, COPPER AND ALUMINUM FROM SCRAP SILICON WAFERS BY LEACHING AND PRECIPITATION
Environmental Engineering and Management JournalVol. 17Nr. 3
The Silicon wafer plays an important role in modern electronic products. During the production of Silicon wafer, a large amount of scrap Silicon wafer is generated. The necessity for it to be recycled and recovered is of vast importance since the metal Silicon (Si) is the major by product. Besides Silicon, the wafers also contain a small quantity of Copper (Cu) and Aluminum (Al), that are considered as minor elements during the recovery process of the Silicon wafer production. Therefore, in o...
Autori: Ching-Hwa Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27660

EVALUATION OF MUNICIPAL SOLID WASTE BY MEANS OF LIFE CYCLE ASSESSMENT: CASE STUDY IN THE SOUTH-WESTERN REGION OF THE DEPARTMENT OF NORTE DE SANTANDER, COLOMBIA
Environmental Engineering and Management JournalVol. 17Nr. 3
The main objective of this research was to evaluate the environmental impact generated by municipal solid waste during its collection, transportation, treatment and processing in the south-west region of the department of Norte de Santander, Colombia, by means of Life Cycle Assessment (LCA). Three strategies for waste management were considered: the current baseline situation, wherein 100% solid waste was taken to the landfill; plus, an optimistic and a pessimistic scenario in which solid was...
Autori: Oscar Orlando Ortiz-Rodriguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27665

CASE STUDY OF LANDFILL RECLAMATION AT CZECH LANDFILL SITE
Environmental Engineering and Management JournalVol. 17Nr. 3
The landfill reclamation project took place in the period from 2008 to 2009. Forestry reclamation was carried out in 2009. The aim of this project was to establish the growth of particular plant species, quantify plant species survival and changes in species properties over time. A phased approach was utilized to evaluate the technical and economic feasibility of the reclamation project; based on the results of these evaluations, in 2011 approximately 90 % of plant species survived during the...
Autori: Magdalena Daria Vaverková
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27668

A BRIEF REVIEW ON RECENT ADVANCES IN AIR-CATHODE MICROBIAL FUEL CELLS
Environmental Engineering and Management JournalVol. 17Nr. 7
The performance of cathode affects the overall performance of a microbial fuel cell (MFC), and cathode configuration affects the fabrication cost of this bioelectrochemical system in a large way. Various modifications in cathode structures have been observed in MFCs. Among them air-cathode MFCs are considered to be the most efficient and sustainable option due to elimination of aeration, as required in aqueous cathodes which consumes energy and increases operating cost of MFCs. An air cathode us...
Autori: Pritha Chatterjee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27680

ENVIRONMENTAL PERFORMANCE OF SAJOR-CAJU MUSHROOM PRODUCTION BASED ON FARM SIZES IN THAILAND
Environmental Engineering and Management JournalVol. 17Nr. 7
Unlike other vegetables, mushroom production requires several substrate ingredients, energy to sterilize the substrate, water to humidify the fruiting house and waste management of the spent substrate and used materials. This work studied the environmental impacts and eco-efficiency of sajor-caju mushroom (Pleurotus sajor-caju (Fr.) Sing.) production in terms of climate change potential, acidification potential, water depletion potential and fossil fuel depletion potential, using life cycle asse...
Autori: Siriprapa Ueawiwatsakul
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27685

REMOVAL OF HEXAVALENT CHROMIUM USING TWO INNOVATIVE ADSORBENTS
Environmental Engineering and Management JournalVol. 17Nr. 7
Hexavalent chromium Cr(VI), a constituent of wastewater from many industries, is regulated by the Environmental Protection Agency (EPA) as one of the priority pollutants. Adsorption is an important technique that can be used for Cr(VI) removal from wastewater. The challenge in adsorption techniques is to find a cheap, widely available adsorbent that has a high adsorption capacity to Cr(VI). Dates stones (DS) and palm fiber (PF) are two agricultural wastes that are produced from palm trees. These...
Autori: Reda Abubeah
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27689

SURVEY OF INDUSTRIAL WASTEWATER TREATMENT PERFORMANCE WITH BIOLOGICAL MONITORING OF PROTOZOA IN THE INDUSTRIAL PARK OF ABADAN
Environmental Engineering and Management JournalVol. 17Nr. 7
Industrial wastewater is of particular importance. In most wastewater treatments, physicochemical parameters are used to determine the performances which are costly while protozoa can be used as less expensive biological indicators to determine the efficiency of the treatment plant. The purpose of this study was to investigate the relationship between protozoa and physic-chemical characteristics of the Abadan wastewater treatment industry. Samples were collected from wastewater stabilization po...
Autori: Abotaleb Bay
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27694

ENVIRONMENTALLY FRIENDLY CELLULOSIC FIBERS FROM CORN STALKS
Environmental Engineering and Management JournalVol. 17Nr. 7
One of the main causes of global climate change is deforestation. Wood is largely used in construction, furniture, and pulp and paper industries, which consume hundred of millions of cubic meter of wood year by year. Forest surfaces decrease rapidly at global level and this reality is of crucial importance for world global ecological footprint. Shortage of pulpwood for paper industry became a great challenge and, for this reason, other raw materials must be taken into consideration. Recovered pa...
Autori: Ana Maria Cheșcă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27703

Environmental engineering and Management Journal No. 8
Vol. 1Nr. 8
• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION
Environmental Engineering and Management JournalVol. 17Nr. 8
Huge amount of red mud has been disposed for the past several decades and it is still generating all over the world. Red mud is a waste of the bauxite processing industry obtained during the alkaline extraction of alumina from bauxite ore. The red mud is a potential raw material containing several valuable components including iron, titanium and rare earth metals. The aim of the research was to develop an appropriate acid digestion technique for the red mud in order to determine the amount of...
Autori: Tatjána Juzsakova1
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27780

NATURAL RADIOACTIVITY OF SAND SAMPLES FROM TRANSYLVANIA AREA AND ASSESSMENT OF THE ENVIRONMENTAL RISKS ON CIVIL AND LIVESTOCK HOUSING
Environmental Engineering and Management JournalVol. 17Nr. 8
The present paper focuses upon the analysis of 226Ra, 232Th and 40K radionuclides, making use of high-resolution HPGe γ-spectrometry devices. By means of this technique, the radiological risk is investigated in the case of various sand samples. The natural concentrations for 226Ra, 232Th and 40K, from sand samples, ranged from (9.3-20.0 Bqkg-1), (9.1-23.7 Bqkg-1) and (203.5-403.3 Bqkg-1), respectively. The radium equivalent activity of sands under investigation was also analyzed and ranged...
Autori: Dorin Vasile Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27775

DIRECT SHEAR PROPERTIES OF LIGHTLY CEMENTED SOIL – POLYSTYRENE BACKFILL MATERIAL
Environmental Engineering and Management JournalVol. 17Nr. 8
Geocomposite materials consisting of lightly cemented mixtures of expanded polystyrene beads (EPS) and backfill soils are commonly used as fillers and for the construction of light weight embankments. The constant normal stress (CNS) and constant volume (CV) direct shear parameters as well as the relationship between gradation properties of four residual granular backfill soils and direct shear parameters of lightly cemented mixture of EPS and backfill soils was evaluated. The maximum density an...
Autori: Felix Okonta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27771

SOIL-WASHING AND THERMAL PLASMA TREATMENT FOR DECONTAMINATION OF DREDGED MARINE SEDIMENTS FROM THE MIDIA PORT – ROMANIA
Environmental Engineering and Management JournalVol. 17Nr. 8
The aim of this paper is to show the results of two methodological approaches applied for decontamination of the Midia Port dredged sediment to assess their potential reusability. Firstly, the sediment samples were defined in physical, chemical, microbiological and ecotoxicological terms. The results were compared to the limit values established by environmental regulations for dredged sediment management. Some sediment samples exposed a very high concentration of hydrocarbons; the sediments wer...
Autori: Irina Catianis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27770

EFFECTS OF SOIL pH ON MECHANICAL PROPERTIES OF GLASS REINFORCED PLASTIC PIPES
Environmental Engineering and Management JournalVol. 17Nr. 8
Influence of soil pH on the mechanical characteristics of glass reinforced plastic (GRP) pipes type was often investigated in different situations encountered in the field. GRP degradation is directly proportional to the exposure to soil with non-neutral reaction. The theoretical and experimental results lead during time to design standards, which allow the application of GRP pipes in water and soil, so as minimum interferences with the materials used in the manufacture of pipes would appear. Sa...
Autori: Ana Diana Ancas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27768

RECYCLING TEXTILE RESIDUES INTO CEMENT COMPOSITES
Environmental Engineering and Management JournalVol. 17Nr. 8
Changing wastes into raw materials is one of the most favored options for waste management, as it diverts wastes from landfill and saves resources. Fibers, either vegetable (cellulosic) or synthetic, may be added to cement pastes in order improve the properties of concrete or mortar by reinforcement. At the same time, if the source of fibers is wastes, then such processes make ways for recycling. In the work described here we studied the compatibility of residues from the nonwoven textile indust...
Autori: Hugo Monteiro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27766

COMPRESSIVE STRENGTH ANALYSIS ON PROBLEMATIC SOILS STABILIZED WITH FLY ASH IN JORDAN
Environmental Engineering and Management JournalVol. 17Nr. 8
The paper analyses the compressive strength of problematic soils as marlstone, limestone, and brown clay in Jordan, considering the capacity to use the fly ash residue obtained from the combustion of oil shale as a cement-like material for building works contributing in minimizing the environmental impact of the expected huge output of solid waste resulting from the retort residue of the oil shale rocks. After blending soils collected from Jordan with both fly ash at different percentages (10...
Autori: Monther Abdelhadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27765

Environmental engineering and Management Journal No. 8
Vol. 1Nr. 4
• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

Environmental engineering and Management Journal No. 8
Vol. 1Nr. 4
• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

HEALTH DAMAGES FROM INDOOR AIR POLLUTION QUANTIFIED USING A NOVEL OFFICE BUILDING DIAGNOSIS METHODOLOGY
Environmental Engineering and Management JournalVol. 17Nr. 9
This study applied a novel receptor design to the development of an indoor air quality diagnosis (IAQD) system. Indoor air pollutants were converted into simple air quality and health damage indices to evaluate the health risks associated with renovated and unrenovated offices. The outcomes of the IAQD methodology presented R2 values of 0.705 and 0.700 for renovated and unrenovated offices, respectively. These values indicate moderate level of prediction accuracy. IAQD results related to typical...
Autori: Huang-Chin Wang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27735

REMOVAL OF ORGANIC MATERIALS FROM TANNERY WASTEWATER CONTAINING AMMONIA FOR REUSE USING ELECTRO-OXIDATION
Environmental Engineering and Management JournalVol. 17Nr. 9
Leather manufacturing process generates significant volume of wastewater. Deliming is one of the unit processes, in which about 4.5 L of wastewater is generated per one Kg of pelt. Reuse of wastewater from the unit processes, where significant volume of wastewater is generated is much important to address pollution mineralization and water conservation. Presence of significant level of organic pollutants is the primary factor that deters reuse of waste streams. In this paper, the Electro-Oxidati...
Autori: Sundaramoorthy Sundarapandiyan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27744

LOW-COST ORTHOPEDIC SHOES BASED ON RECYCLED MATERIALS: MANUFACTURING, PLANTAR CORRECTION EVALUATION
Environmental Engineering and Management JournalVol. 17Nr. 8
The paper describes a flexible and low cost method regarding the progress of improvement, in terms of foot diseases, in case of wearing orthopedic shoes containing progressive correction orthotic insoles. The research in the field aims at two purposes. The first one is to find an effective method for orthopedic shoe insoles manufacturing, with the role of progressively correcting plantar diseases by using cheap solutions based on the recycled materials. The research focused on an adaptive insole...
Autori: Barbu Braun
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27757

EVALUATION OF ECO-EFFICIENCY BY MULTICRITERIA DECISION ANALYSIS. CASE STUDY OF ECO-INNOVATED AND ECO-DESIGNED PRODUCTS FROM RECYCLABLE WASTE
Environmental Engineering and Management JournalVol. 17Nr. 8
Until now, humanity has strived to makes efforts for warranting the economic development on a sustainable way for well-being improvement, simultaneously with resource preservation and environmental protection. The industrial production processes, which generate added value and ensure people welfare are in connection with the environment regarding resource consumption and waste generation. In order to work on a sustainable basis, industry should attain a balance between economy, ecology and comm...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27759

MEASUREMENTS TO EVALUATE THE POSSIBILITY TO PRODUCE BRICKS FROM WASTE CUBILOT SLAGS
Environmental Engineering and Management JournalVol. 17Nr. 10
In this paper, the typical measurement techniques and production procedures defined in the UNI-EN guidelines for ceramic manufacture are taken into consideration to evaluate the properties and the characteristics of the bricks produced by using a mixture containing cubilot slag. The results of the experimental tests demonstrate that these measurement techniques are not enough to define the safety of the waste bricks. Up to now, UNI-EN guidelines for ceramics do not define crystallinity measureme...
Autori: Domenico Luca Carni
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27787

SPENT COFFEE GROUNDS FROM COFFEE VENDING MACHINES AS FEEDSTOCK FOR BIOGAS PRODUCTION
Environmental Engineering and Management JournalVol. 17Nr. 10
Large amounts of spent coffee grounds (SCG) are currently available all over the world due to the enormous increase in coffee consumption. This increase has in turn to be related to the even greater diffusion of coffee vending machines. The aim of this study was to evaluate the biomethanation potential (BMP) of SCG alone or in co-digestion with pig slurry (PS). Pig slurry was chosen because it is frequently utilized as feedstock for biogas production from agricultural waste. The raw material was...
Autori: Ciro Vasmara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27794

ECO-INNOVATION IN VALCUCINE FOR A CIRCULAR ECONOMY
Environmental Engineering and Management JournalVol. 17Nr. 10
Recently, more and more companies are implementing good environmental practices. Environmental certifications, besides being valuable management tools for companies, given the opportunity to strengthen their role on the market. An example of such virtuous behavior is the case of Valcucine, an enterprise of the Livenza furniture district in Northern Italy. Valcucine focuses its care in the production of furniture, in particular of kitchen units, characterized by sustainable production, eco-compat...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27797

APPLICATION OF LCA METHODOLOGY IN THE ASSESSMENT OF A PYROLYSIS PROCESS FOR TYRES RECYCLING
Environmental Engineering and Management JournalVol. 17Nr. 10
According to recent estimations, the total yearly amount of end-of-life tyres (ELTs) arising in Europe exceeds 3 million tons; more than 95% are managed through mechanical and thermal treatments because ELTs represent a useful resource both of materials and energy. For this purpose, the goal of the present work is the assessment of the environmental impacts of a novel pyrolysis process and the comparison with alternative ELTs valorisation or disposal scenarios. Life Cycle Analysis (LCA) methodol...
Autori: Esmeralda Neri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27798

EFFECT OF PARTICLES SIZE OF CRT GLASS WASTE ON PROPERTIES OF POLYMER CONCRETES
Environmental Engineering and Management JournalVol. 17Nr. 10
The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

SUSTAINABLE REMEDIATION TECHNOLOGIES FOR CONTAMINATED MARINE SEDIMENTS: PRELIMINARY RESULTS OF AN EXPERIMENTAL INVESTIGATION
Environmental Engineering and Management JournalVol. 17Nr. 10
This paper deals with the relevant environmental issues concerning marine sediments contamination, for which there is the need for further development of sustainable remediation technologies. Among the in-situ remediation options, the reactive capping turns out to be an interesting approach. On the other hand, when the sediments must be dredged, the stabilization and solidification (S/S) treatments can represent an efficient and sustainable solution for the recovery of the materials, in the spir...
Autori: Francesco Todaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27801

SEPARATE COLLECTION OF ORGANIC WASTE AND CARDBOARD: ASSESSING THE IMPACT OF A DEVELOPMENT COOPERATION PROJECT IN TULKAREM, WEST BANK
Environmental Engineering and Management JournalVol. 17Nr. 10
This research aimed to analyze the impact of the introduction of a separate collection system for organic waste and cardboard in the Governorate of Tulkarem, West Bank (Occupied Palestinian Territories). The amount of waste diverted from the final disposal at the landfill of Zahret Al-Finjan was quantified and the quality of separate materials was evaluated. An economic and environmental analysis was performed to quantify the impact of separate collection in terms of greenhouse gas emissions and...
Autori: Francesca Villa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27802

GASIFICATION OF BIOMASS FROM RIVER MAINTENANCE AND CHAR APPLICATION IN BUILDING MATERIALS PRODUCTION
Nr. 10
This paper exposes the research activities regarding REBAF (Energetic Recover of River Biomasses) project, focused on the maintenance operations self-sustainability of the Secchia river (Italy). Poplar was found as the most abundant and representative wood plant of Secchia riverbanks, with a good behavior during gasification process: from 1 hectare of maintenance every three year, it was possible to produce 23 MWh of electrical power and 31 MWh of thermal power. The biochar obtained was characte...
Autori: Vittorio Vezzali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27804

INNOVATIVE USE OF SCRAP AND WASTE DERIVING FROM THE STONE AND THE CONSTRUCTION SECTOR FOR THE MANUFACTURING OF BRICKS. REVIEW OF THE INTERNATIONAL SCENARIO AND ANALYSIS OF AN ITALIAN CASE STUDY
Environmental Engineering and Management JournalVol. 17Nr. 10
The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

EFFECT OF CORE LAYER COMPOSITION ON WATER RESISTANCE AND MECHANICAL PROPERTIES OF HYBRID PARTICLEBOARD
Environmental Engineering and Management JournalVol. 17Nr. 12
In this study, the effect of raw material formulation used in the core layer on the water resistance and mechanical properties of particleboard made from a mixture of rice husk and wood particles was investigated. For this aim, four series of particleboard core layer were produced from different proportions of rice husk/wood particles, different amounts of urea-formaldehyde (UF) adhesive, low density polyethylene (LDPE), and maleic anhydride grafted polyethylene (MAPE), respectively. The amounts...
Autori: Jin Heon Kwon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27871

NUMERICAL SIMULATION OF RELATIVE HUMIDITY IN A MASONRY WALL APPLYING THREE DIFFERENT WATERPROOFING MEMBRANES
Environmental Engineering and Management JournalVol. 17Nr. 12
The analysis by numerical simulations can be applied to building materials subjected to different climatic conditions to envisage the influence of environmental factors in terms of drying time, water absorption and thermal performance of materials. Currently there is a wide variety of new building materials used for insulation, waterproofing and rehabilitation, each contributing in a specific way to constructions improvement during their service life. In time, every building is subjected to degr...
Autori: Alexandra Alisa Găină
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27863

PREDICTION OF E-WASTE GENERATION BASED ON GREY MODEL (1,1) AND MANAGEMENT IN BOTSWANA
Environmental Engineering and Management JournalVol. 17Nr. 11
This paper seeks to evaluate the quantities of e-waste in Botswana from 2000-2019, with a view towards formulating an effective and sound e-waste management system. Due to a lack of complete historical records on e-waste quantity and quality, this was achieved by the Grey Model GM(1,1) forecasting method. Our estimations indicate that an average weight of about 293.18 tons of e-waste will be generated in 2019 in the country. Considering an economic lifespan of between 3 and 10 years, more e-wast...
Autori: Daniel Mmereki
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27838

ARTIFICIAL AGING EXAMINATION OF PVC FIBERS AS VIBRATING STRINGS
Environmental Engineering and Management JournalVol. 17Nr. 11
Changes in material properties are examined in this work by vibration diagnostic techniques. In the article examinations of soft poly(vinyl chloride) (PVC) fibers, which were tested as vibrating strings are presented after different UV light induced aging times. The developed experimental system is presented in this manuscript and the main goal is to determine material changes as the results of artificial aging by special vibration diagnostic methods. The damped oscillations, where PVC fibers ar...
Autori: Dénes Kocsis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27841

ASSESSMENT OF KINETICS, EQUILIBRIUM AND THERMODYNAMICS OF BLACK KROM KJR DYE ADSORPTION ONTO AQUATIC MACROPHYTE Pistia stratiote
Environmental Engineering and Management JournalVol. 17Nr. 11
The macrophyte Pistia stratiote was used as biosorbent for the removal of Black Krom KJR (BK-KJR) dye in synthetic aqueous solution. Initially, some tests were performed to verify the best operational conditions such as pH, biosorbent particle size, sorption temperature and stirring speed, which were later used in the kinetic and equilibrium tests. All tests were performed in duplicate. The highest removal rates of the pollutant were achieved at the process conditions of initial pH 2, granulo...
Autori: Aparecido Nivaldo Módenes
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27843

COMPARISON OF SOURCES AND SPATIAL DISTRIBUTION OF HEAVY METALS AT TWO PERI-URBAN AREAS IN SOUTHWEST SHENYANG, CHINA
Environmental Engineering and Management JournalVol. 18Nr. 1
To investigate the sources and spatial distribution of heavy metals in soil, samples were collected at two scales from the alluvial plains of Shenyang, China. Statistical analysis at small scale showed average concentrations of Cu, Pb, Zn, Ni, Cr and As of 36.76, 33.33, 100.06, 37.98, 91.26, and 7.99 mg/kg, respectively. Corresponding large-scale concentrations were 34.11, 46.38, 82.44, 32.51, 83.77, and 24.06 mg/kg. At both scales, Ni and Cr were mainly controlled by parent materials and Pb ...
Autori: Jin Wu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27877

EFFECT OF SYNTHESIS PARAMETERS ON SORPTIVE PROPERTIES OF GLYCEROL-DERIVED MESOPOROUS CARBON
Environmental Engineering and Management JournalVol. 18Nr. 1
The effect of synthesis conditions on sorptive properties of glycerol-derived mesoporous carbon materials were studied. Sorption properties of the synthesized carbon-based materials regarding to different adsorbate molecules, as well as water vapors, phenol and methylene blue molecules were analyzed. The sorption capacity of the synthesized mesoporous carbons depends upon synthesis conditions, namely upon pyrolyzing temperature and carbon precursor to silica weight ratio, being determined by ...
Autori: Maria Ignat
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27880

n-TYPE POLYIMIDES INCORPORATING OXADIAZOLE AND PERYLENE FLUOROPHORES
Environmental Engineering and Management JournalVol. 18Nr. 1
The main topic of this study is the photo-optical and electrochemical behavior of a series of fluorinated copolyimides containing both oxadiazole and perylene moieties in the main chain. The polymers prove a strong photo-optical stability on a large temperature domain and display different types of photoluminescent behavior in solution and in solid state, with emission maxima in the bluish and green–yellow domains. Cyclic voltammetry investigations suggest that the polymers can be easil...
Autori: Radu-Dan Rusu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27883

NEW CATALYSTS USED IN THE HYDROGENOLYSIS REACTION OF GLYCEROL
Environmental Engineering and Management JournalVol. 18Nr. 1
The catalytic hydrogenolysis of glycerol, a by-product of the biodiesel manufacturing process was studied on copper chromite catalysts with different chemical composition. The obtaining of propylene glycol was studied under mild reaction conditions (180- 240oC temperature range, 8 hours reaction time and moderate pressures). These important parameters have significant effects on the glycerol conversion and that is way the actual study was concerned to the obtaining of a superior selectivity t...
Autori: Adriana Marinoiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27892

BEHAVIOUR OF NEW PULLULAN DERIVATIVE SOLUTIONS WITH BIOTECHNOLOGICAL POTENTIAL
Environmental Engineering and Management JournalVol. 18Nr. 2
The synthesis of dimethylamino-propylamine pullulan, DMAPA-P, with a substitution degree of 0.4 was performed in dimethylsulfoxide using N,N’-carbonyldiimidazole as activator and dimethylaminopropylamine as amination agent. Then, two quaternary derivatives (trimethylammonium-propylamine pullulan, TMAPA-P, and benzyldimethylammonium-propylamine pullulan, BzDMAPA-P) were prepared from DMAPA-P by quaternization with methyl iodide and benzyl chloride. The behavior of new pullulan derivativ...
Autori: Anca Giorgiana Grigoras
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27902

LIGNOCELLULOSIC BIOMASS CHARACTERISTICS FOR BIOENERGY APPLICATION: AN OVERVIEW
Environmental Engineering and Management JournalVol. 18Nr. 2
Considering world energy demand and its security, much attention has been focused on identifying promising lignocellulosic substrates to generate a variety of downstream fuels and chemicals. In response, a recent key research area has centered on hydrolysis of cell wall polysaccharides by various physical, chemical and biological means. Due to their complex chemical and molecular structure, there is a substantial knowledge gap in understanding of biomass recalcitrance and its relationship wit...
Autori: Nadeem Akhtar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27908

WASTEWATER SEPARATION FROM GYPSUM SUSPENSIONS AND THE MANAGEMENT OF RESULTING WASTE
Environmental Engineering and Management JournalVol. 18Nr. 2
In this work, the examination of separation of gypsum from wastewater generated during the machining of casts and the method of waste gypsum management have been presented. This waste gypsum is produced in Ortolab Poland facilities. Gypsum casts are cut and ground in water-cooled circular saws. Wastewater, with over-normative content of suspension, 10000 mg L-1 and sulphates, 1600 mg L-1 is produced in the process. The analysis of water and wastewater management in Ortolab Poland facilities l...
Autori: Ewa Liwarska-Bizukojc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27910

ASSESSMENT OF MANUFACTURING PROCESSES ECO-EFFICIENCY BASED ON MFA-LCA-MFCA METHODS
Environmental Engineering and Management JournalVol. 18Nr. 2
The objective of this paper is to investigate eco-efficiency in a durable goods manufacturing system. It is intended to apply a method used in a company producing heating devices within the boiler sector. A hybrid methodology is used to assess the eco-efficiency of manufacturing processes, based on combining Material Flow Analysis, Life Cycle Assessment, and Material Flow Cost Accounting. This provides an effective approach to evaluate environmental and economic performance in the context of ...
Autori: Aldona Kluczek
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27918

CHARACTERISTICS OF SOILS IMPROVED WITH POLYETHYLENE TEREPHTHALATE WASTES
Environmental Engineering and Management JournalVol. 18Nr. 2
In this study we investigated the possibilities of using recyclable fine and coarse grain waste obtained by grinding Polyethylene Terephthalate (PET) containers, as light filling materials for different applications (clay dams, highway embankments, and backfills behind retaining structures. Various geotechnical tests were performed on clayey soil and soil-PET mixtures using recycled fine and coarse granules of Polyethylene Terephthalate bottles. The results indicated that the use of the recyc...
Autori: Osman Gunaydin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27920

ADSORPTION OF PHENOL ON ADSORBENTS PRODUCED FROM COCONUT TREE WASTE: KINETIC AND EQUILIBRIUM STUDIES
Environmental Engineering and Management JournalVol. 18Nr. 3
Agro-industrial waste are seen as potential precursors in the development of adsorbents for the removal of phenolic compounds, which exhibit a harmful effect to human health due to their high toxicity. This work evaluated the use of coal prepared from coconut tree agro-industrial waste, for the adsorption of phenol in aqueous solutions. Three coal samples were prepared as follows: carbonized only (Cb), activated with synthetic air (Cair) and activated with CO2 (CCO2). Based on the results of ...
Autori: Marta Duarte
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27937

SPOTTED GOLDEN THISTLE STALKS AS A NOVEL LOW-COST SORBENT FOR METHYLENE BLUE SORPTION FROM SYNTHETIC AQUEOUS SOLUTIONS: EQUILIBRIUM AND KINETICS STUDIES
Environmental Engineering and Management JournalVol. 18Nr. 3
The present study explores the potential use of plant waste i.e. spotted golden thistle (Scolymus maculatus L.) stalks, as an inexpensive sorbent for the removal of methylene blue from synthetic aqueous solutions. Firstly, the waste material was characterized using different analysis methods, then kinetics and equilibrium of dye sorption were investigated using a batch sorption technique. The influence of contact time, initial dye concentration, sorbent dose, particle size and agitation speed...
Autori: Zoubida Senouci Bereksi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27941

PARTICULATE MATTERS GENERATED BY CAPRISOARA TAILING POND AND THEIR IMPACT ON AIR QUALITY
Environmental Engineering and Management JournalVol. 18Nr. 4
Analyzing and reducing the possible effects of air pollution on human health became important issues for improving the quality of life in urban areas. Particulate matters (PM) are air pollutants with a potential important impact on the health of vulnerable people (e.g., children, elderly) and non-vulnerable people as well. The level of PM air pollution is mainly influenced by the PM concentration and by parameters such as the meteorological conditions and the synergic effects of other air pol...
Autori: Adrian Florea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27951

MODERNIZATION OF THE TEST METHOD FOR NON-SPARKING MATERIALS INTENDED FOR USE IN EXPLOSIVE AREAS
Environmental Engineering and Management JournalVol. 18Nr. 4
For assessing the intrinsic safety to mechanical sparks, two dedicated methods are implemented in testing laboratories and further used for the conformity assessment of products with regard to explosive atmospheres ignition, namely: impact test and friction test. The purpose of the article is to present the results obtained by using the first method mentioned, results which shall be applied in further research for comparison with the ones resulting from the friction test. The article presents...
Autori: Adrian Marius Jurca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27957

ANALYSIS OF PROTECTION SYSTEMS FOR REDUCING THE EFFECTS OF SHOCK WAVES PRODUCED BY EXPLOSIONS IN ENCLOSED SPACES
Environmental Engineering and Management JournalVol. 18Nr. 4
Explosion-type accidents can cause significant human losses and material damages; therefore, special attention has to be granted to explosion risk assessments and to the development of appropriate explosion-protection measures. Such measures of protection aim to reduce the explosion risk to acceptable levels, in compliance with regulations and standards in force, so as to provide the proper safety level for humans as well as to prevent damage to the surrounding goods and environment. The flas...
Autori: Marin Silviu Nan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27961

NEW TOOLS FOR ESTIMATING THE EXTENT OF HAZARDOUS AREAS GENERATED BY GAS LEAK EXPLOSIONS
Environmental Engineering and Management JournalVol. 18Nr. 4
The current paper is an overview on previous and ongoing research carried out by the authors concerning the use of Computational Fluid Dynamics for the accurate classification of hazardous Ex areas generated by flammable gases, for the optimization of computational simulation of air-methane mixture explosions by using ANSYS CFX and FLUENT and for calibrating computational simulations of gas explosions using the Schlieren effect. These research works containing analytic studies have led to the...
Autori: Vlad Mihai Păsculescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27962

GREENHOUSE GAS EMISSION REDUCTION IN FROZEN FOOD PACKAGING
Environmental Engineering and Management JournalVol. 17Nr. 12
This study evaluates the environmental impacts of four types of frozen food packages throughout their lifecycle and suggests strategies for reducing their related environmental impacts. The four most widely used frozen food packaging materials were chosen for this study: (1) pouches composed of low-density polyethylene (LDPE) film; (2) pouches composed of polyethylene terephthalate (PET) and LDPE film laminate; (3) cardboard boxes coated with LDPE; and (4) multipackage composed of cardboard boxe...
Autori: Daina Kliaugaite
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27979

A STUDY ON THE MECHANICAL PROPERTIES OF SOME GREEN-COMPOSITES
Environmental Engineering and Management JournalVol. 17Nr. 12
In this paper, we determined some mechanical properties of a new category of green composites, based on tensile tests. More precisely, we selected a set of samples from a new bio-resin based on Dammar and two sets of samples from green-composites with matrix by bio-resin and reinforced with almost compact layers of Typha latifolia or Schoenoplectus lacustris. For these built materials, we obtained the characteristic curve, tensile strength, percentage elongation after fracture and elasticity mod...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27980

COLORS DISTRIBUTION IN POLYMER WASTES AND COLOR PREDICTION OF RECYCLED POLYMERS
Environmental Engineering and Management JournalVol. 18Nr. 5
In this paper, several image analysis techniques have been applied aiming to obtain useful information regarding the processing of municipal solid waste polymers. An automated color extraction method has been applied in order to quantize the color distribution in the polymer wastes aiming their resource and time-efficient separation according to their color. Also, by processing different density fractions from the polymer waste the color of the final material has been predicted, as well as th...
Autori: Silvia Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27994

DEGRADATION RATE OF LIMED SEWAGE SLUDGE IN AN AGRICULTURAL SOIL
Environmental Engineering and Management JournalVol. 18Nr. 5
Little is known about the degradation kinetics of sewage sludge, sanitized with Ca(OH)2, in soil. Thus, this work aimed to monitor the degradation of limed sludge, under field conditions, when applied on soil surface or incorporated into the soil. The limed sludge was applied in dystrophic Inceptisol at a dose of 500 kg ha-1 yr-1 of total nitrogen. The mineralization process in the soil was monitored for 131 days. Samples of organic material were collected for analysis of total and easily oxi...
Autori: Isabela Diniz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27995

A MULTI-OBJECTIVE OPTIMIZATION MODEL TO SUPPORT THE MUNICIPAL SOLID WASTE MANAGEMENT
Environmental Engineering and Management JournalVol. 18Nr. 5
This study aims to define a municipal Solid Waste Management (SWM) strategy using Multi-objective Optimization Problem (MOP) and ELECTRE method. Four waste treatment technologies were considered: recycling, composting, incineration and landfilling. Firstly, a Multi-objective Linear Programing (MOLP) model was developed. The solutions obtained from this model were ranked using the ELECTRE method. It was considered as case study a hypothetical city of 1,000,000 of inhabitants, presenting the a...
Autori: Rafaella de Souza Henriques
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27998

DETERIORATION OF WATER QUALITY BY STAGNATION IN STORAGE TANKS
Environmental Engineering and Management JournalVol. 18Nr. 5
This study presents the influence of the storage recipients’ material and of the use and the type of stirring on the drinking water quality. The kinetics of drinkable water quality alteration under stationary conditions and under magnetic and sonical stirring have been monitored for a two weeks period. The microbiological parameters (total number of germs developed at 37°C and 22°C, lactose-positive and lactose-negative bacteria, coliform bacteria and Echerichia coli), as well a...
Autori: Laura Damian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27999

ENVIRONMENTAL LOAD ESTIMATING MODEL FOR NATM TUNNEL USING CASE BASED REASONING IN THE PLANNING STAGE OF TUNNEL CONSTRUCTION
Environmental Engineering and Management JournalVol. 18Nr. 6
Energy and resource consumption in construction projects is one of major causes to global warming. In order to evaluate the environmental load of construction projects, previous approaches calculated the quantities of construction materials and energy consumption from the use of equipment based on detailed design information after the completion of design. As a result, it is difficult to estimate environmental loads prior to design completion. This study is to develop an estimating model whic...
Autori: Ju-hyun Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28007

VISCOSE-MAGHEMITE/GOETHITE POLYMERIC COMPOSITE AS SORBENT FOR OIL SPILL CLEANUP
Environmental Engineering and Management JournalVol. 18Nr. 6
The paper reports on the preparation of polysiloxane hydrophobized viscose-maghemite/goethite magnetic composite with properties appropriate for uses in oil spill sorption from polluted aqueous media. A multi-step procedure was employed to obtain the polymeric composite. The structures of the prepared samples and precursors were analyzed by Fourier transform infrared spectroscopy (FTIR), whereas their morphology was investigated by means of scanning electron microscopy (SEM). The hydrophobic...
Autori: Răzvan Rotaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28008

GREEN RETROFITTING OF REINFORCED CONCRETE BEAMS EMPLOYING SUSTAINABLE NATURAL SISAL FIBRE COMPOSITES AS ALTERNATIVE TO ARTIFICIAL FIBRE COMPOSITES FOR ENHANCED SHEAR STRENGTH
Environmental Engineering and Management JournalVol. 18Nr. 6
Sustainability and renewability in constructional materials and also utilization of such materials for various engineering purpose is the need of the hour. Green retrofitting with the aid of green fibre reinforced polymer (FRP) materials, made up of natural bio fibres like sisal would contribute to sustainable development. Non fossil-fuel carbon precursor organic fibres, i.e. sisal FRP composites were used for retrofitting of reinforced concrete (RC) beams, designed to undergo shear failure. ...
Autori: Tara Sen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28025

HYDROCARBON REMOVAL FROM DIESEL-CONTAMINATED SOIL THROUGH REUSED ACTIVATED CARBON ADSORPTION
Environmental Engineering and Management JournalVol. 18Nr. 9
Hydrocarbon spillages are an increasing problem in Mexico, which has left large areas of contaminated land that entail negative effects on environmental, economical and social aspects. Such soil contamination demands fast, efficient and cost-competitive remediation technologies. This work explores activated carbon (AC) adsorption as a fast soil treatment to lower hydrocarbon concentrations in a contaminated soil from Puebla, Mexico, reusing an AC residue for such purpose. Both, semi-wasted AC an...
Autori: Sandra Arroyo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28055

CURRENT APPROACHES FOR RAW WOOL WASTE MANAGEMENT AND UNCONVENTIONAL VALORIZATION: A REVIEW
Environmental Engineering and Management JournalVol. 18Nr. 7
Since the middle of the past century, when the synthetic fibers began their rise, wool has steadily lost importance in the textile sector, and now is a marginal fiber on the textiles market. Great amounts of non-marketed raw wool have turned from an income source for sheep farmers into a problematic waste, which is, at best, burn or landfill. With increasing interest for sustainable use of natural resources, wool was reconsider as an underrated, underused renewable resource, worthy of a bette...
Autori: Hossein Rajabinejad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28031

LIFE CYCLE ASSESSMENT OF BIO-BASED THERMAL INSULATION MATERIALS FORMED BY DIFFERENT METHODS
Environmental Engineering and Management JournalVol. 18Nr. 7
Inorganic thermal insulators are commonly used to improve energy efficiency. However, environmental and health aspects of their production until the end of life have been increasingly concerned. Agricultural wastes including rice straw, rice husk and corn cobs are abundant in Thailand and converted into value-added products such as thermal insulation materials offers a viable recycling opportunity as the ecological burden of a product has now become a widely-discussed issue. In this paper, gl...
Autori: Phairat Usubharatana
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28033

WASTE TONER POWDER IN CONCRETE INDUSTRY: AN APPROACH TOWARDS CIRCULAR ECONOMY
Environmental Engineering and Management JournalVol. 18Nr. 9
Substantial quantities of toner cartridges are produced and used in photocopiers and printers every year. Spent toner cartridges are classified as hazardous waste because they contain toner powder with specific chemical composition, making a recovery of waste toner cartridges a very important issue from the aspect of waste management and environmental protection. Spent toner cartridges are mechanically processed to exploit valuable materials such as metals, plastics and magnets and to separate t...
Autori: Ivana Melnjak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28053

STUDY OF THE GLYPHOSATE-AMINE PESTICIDE MINERALIZATION IN WASTEWATER BY OZONATION TREATMENT
Environmental Engineering and Management JournalVol. 18Nr. 9
The main objective of the research was to study the efficiency of the glyphosate amine pesticide mineralization in wastewaters (real and model type of wastewaters respectively) using ozonation treatment as an advanced oxidation processes (AOP). The wastewater samples (model wastewater) were obtained by mixing a given volume of the stock solution prepared from glyphosate isopropyl-amine in different volumetric ratios with distillated water and with real wastewater obtained from a domestic wastewa...
Autori: József Németh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28050

EVALUATION OF BIOMETHANE YIELDS FROM HIGH-ENERGY ORGANIC WASTE AND SEWAGE SLUDGE: A PILOT STUDY FOR A WASTEWATER TREATMENT PLANT
Environmental Engineering and Management JournalVol. 18Nr. 9
The article describes a pilot study on a wastewater treatment plant operating a biogas plant (2.793 MW). The authors of the experiment used organic waste material, including: chicken fat with feathers (FF), molasses (M), glycerol (GL), raw sewage sludge (SS) and digested sewage sludge as an inoculum. The parameters of raw and digested sludge were compared, e.g. changes in the concentrations of ammonium nitrogen (N-NH4+), alkalinities, chemical oxygen demand (COD) and light metal ions. Potenti...
Autori: Agnieszka A. Pilarska
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28064

DESIGN AND ENVIRONMENTAL ASSESSMENT OF BIOPLASTICS FROM Hermetia illucens prepupae PROTEINS
Environmental Engineering and Management JournalVol. 18Nr. 10
Proteins from Hermetia illucens (or Black Soldier Fly, BSF) have been employed in this study as possible source for bioplastic formulation. This type of bioplastic can replace the actual materials employed in agriculture, avoiding the critical issues concerning the soil pollution due to conventional plastic end-life. Different plasticizing agents (glycerol and polyethylene glycol) have been tested and the ability to generate a homogenous film, through wet casting, has been evaluated. Characteriz...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28074

BIOMASS EXPLOITATION FOR ENERGY SUPPLY AND QUALITY COMPOST PRODUCTION. AN EXEMPLARY CASE OF CIRCULAR ECONOMY IN THE NORTH EAST OF ITALY
Environmental Engineering and Management JournalVol. 18Nr. 10
The goal 12 of the 2030 Agenda for Sustainable Development takes into consideration the responsible consumption and production in the perspective of circular economy. The agri-food sector is more actively involved in these initiatives, because it offers the possibility to exploit waste and by-products, by adopting suitable biotechnologies. Such processes can be carried out either under aerobic conditions, for the production of compost, or anaerobically, for the production of biogas. In this work...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28078

SUSTAINABLE MANAGEMENT OF SEDIMENTARY RESOURCES: A CASE STUDY OF THE EGADI PROJECT
Environmental Engineering and Management JournalVol. 18Nr. 10
Multiple activities carried out on coastal areas expose marine sediments to contamination and their management has a great socio-economic importance with a high impact on economic development of coastal areas. However, there is an increasing shift towards the use of more sustainable approaches for managing ‘contaminated’ sediments. Using a case study of the Favignana Habour in Italy, this paper evaluates three approaches for the management of these sediments. The results of simulatio...
Autori: Sergio Cappucci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28082

COMBINED ASSESSMENT OF CHEMICAL AND ECOTOXICOLOGICAL DATA FOR THE MANAGEMENT OF CONTAMINATED MARINE SEDIMENTS
Environmental Engineering and Management JournalVol. 18Nr. 10
Sediments in coastal areas can accumulate a variety of contaminants, acting as both carriers and long-term secondary sources of contamination for aquatic ecosystems. Nowadays, there is a growing interest on developing new assessment criteria of sediment ecological quality for setting priorities and management strategies of contaminated materials. According to the literature, the weight of evidence (WOE) approach has been developed to provide a multidisciplinary characterization which combines di...
Autori: Francesco Todaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28089

CIRCULAR ECONOMY AND UPCYCLING OF WASTE AND PRE-CONSUMER SCRAPS IN CONSTRUCTION SECTOR. THE ROLE OF INFORMATION TO FACILITATE THE EXCHANGE OF RESOURCES THROUGH A VIRTUAL MARKETPLACE
Environmental Engineering and Management JournalVol. 18Nr. 10
The activities connected with the construction sector are responsible for several environmental impacts, both in the construction sector, and in the many manufacturing sectors involved in the supply chain of materials and products (mining sector, manufacturing sector, waste treatment etc.). The building products have a marked cross-sectorial connotation, according to the ANCE 2016 report, 31 economic sectors out of 36 are suppliers in the construction sector. One of the possibilities to reduce t...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28090

NANOMATERIALS IN CONSTRUCTION AND THEIR POTENTIAL IMPACTS ON HUMAN HEALTH AND THE ENVIRONMENT
Environmental Engineering and Management JournalVol. 18Nr. 11
Over the last few years, the use of nanomaterials in the construction industry has grown prominently. Nanomaterials can considerably modify the properties of construction materials and even improve their performance. Despite their merits, considerable research has reported that nanomaterials pose a potential risk to human health. For this reason, it is important to fully comprehend the effects of nanomaterials on human health and the environment throughout all phases of their life cycle, includ...
Autori: Saeed Kamali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28091

A SYSTEM DYNAMICS-BASED ECONOMIC PERFORMANCE SIMULATION OF CONSTRUCTION WASTE REDUCTION MANAGEMENT: EFFECTIVE APPLICATION OF PREFABRICATION
Environmental Engineering and Management JournalVol. 18Nr. 11
Cost effective management of construction and demolition waste (C&DW) has become a serious issue with increased construction activity and modern urban lifestyle which is damaging environment, eating up resources and causing rapid land use changes. These factors have influenced the construction industry significantly and therefore gained the practitioners’ attention in recent past. New strategies of C&DW reduction management are being devised and reported; this research aims at prov...
Autori: Ahsen Maqsoom
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28096

USE OF MESH WINDBREAKS FOR SOIL EROSION IN OLIVE GROVES IN SOUTHEASTERN SPAIN
Environmental Engineering and Management JournalVol. 18Nr. 11
We used windbreak nets to reduce erosion and sediment transport in a semiarid area. A 13x30thread·cm-2 and 39% mesh net facing the wind increased average erosion reduction up to 72% at a height of 0.4 m in recently tilled olive groves. The use of sonic anemometry techniques for identifying wind movement patterns has rarely been exploited for improving field studies, and much less for windbreaks. Sample components collected in traps placed at different heights and distances from the windbr...
Autori: Carlos Asensio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28099

PERFORMANCE OF RECYCLED ASPHALT MIXTURES FORMULATED WITH MODIFIED BITUMEN
Environmental Engineering and Management JournalVol. 18Nr. 12
The maintenance of flexible roads or roads at end of life service generates high quantities of reclaimed asphalt pavement every year. The reuse of these materials, considered for a long time as waste, allows a substantial saving in transport, energy, and maintains dwindling natural resources. Recycling of asphalt also helps to reduce inert waste storage volumes, and conserve valuable landfill space. The applicability of recycled asphalt was tested in laboratory, and asphalt mixtures containing 2...
Autori: Mehena Oualit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28117

WIND-ERODED NITROGEN BALANCE IN AN ENTIC HAPLUSTOLL UNDER DIFFERENT TILLAGE CONDITIONS
Environmental Engineering and Management JournalVol. 18Nr. 12
Little information is available on the combined effect of weather conditions and tillage systems on nitrogen lost from wind erosion. A field study was carried out on an Entic Haplustoll to analyze N content in the eroded material. Field measurements were made during the winter fallow (WF) and summer fallow (SF) periods in conventional (CT) and a no-till (NT) fields. Winters are more humid and less windy than summers. Results showed that there were N losses and gains by the wind with both tillage...
Autori: Sergio Alberto Abascal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28119

A TEMPORAL HISTORICAL ANALYSIS ON HOW SELECTIVE COLLECTION OF RECYCLABLE WASTE IS INFLUENCED BY EDUCATION-RELATED AND REGIONAL FACTORS AT A UNIVERSITY
Environmental Engineering and Management JournalVol. 18Nr. 12
The aim of the study was to determine the relation between the composition of university recyclable material collected (plastic, paper, metal and glass), education-related factors such as the academic calendar and work stoppages, and regional factors such as climate, regional economy and composition of the urban waste collected over an 8-year period. The study was conducted based on the composition of recyclable dry solid wastes at the Federal University of Rio de Janeiro, quantified after th...
Autori: Victor Becker Tavares
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28127

STUDY OF BATCH ADSORPTION OF URANIUM IONS BY MCM-48 MATERIALS SYNTHESIZED AT ROOM TEMPERATURE
Environmental Engineering and Management JournalVol. 19Nr. 1
The mesoporous MCM-48 was synthesized at room temperature with different templates such as hexadecytrimethylammonium bromide (C16TABr), hexadecytrimethylammonium chloride (C16TACl) and dodecyltrimethlammonium chloride (C12TACl). The obtained materials were characterized by XRD, N2 adsorption/desorption, FTIR and SEM techniques, and their performance as uranium adsorbent were investigated. In this framework, the effect of contact time, pH of solution, initial uranium concentration and temperat...
Autori: Meriem Chabane Sari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28131

USING PASSIVE DESIGN STRATEGIES TO IMPROVE THERMAL PERFORMANCE OF SINGLE FAMILY HOUSES. A COMPATIVE STUDY
Environmental Engineering and Management JournalVol. 19Nr. 1
GREY DEMATEL TECHNIQUE FOR EVALUATING PRODUCT RETURN DRIVERS: A MULTIPLE STAKEHOLDERS’ PERSPECTIVE
Environmental Engineering and Management JournalVol. 19Nr. 1
In order to reduce environmental impacts from final disposal, an interest in reverse logistics has caught the attention of both firms and academicians. However, motivational factors or drivers have to be considered to efficiently perform reverse logistics, as well as the different perspectives from stakeholders. Thus, the purpose of this study is to evaluate the interrelationship among reverse logistics drivers under the perspectives of the key stakeholders. A grey-based DEMATEL (Decision Makin...
Autori: Marina Bouzon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28133

SYNERGIC EFFECTS OF SUNFLOWER STALKS AND SODIUM SILICATE IN DEVELOPING AN ECOLOGICAL CONCRETE
Environmental Engineering and Management JournalVol. 19Nr. 1
Building industry is a very large domain in the global economy and it has a lot of consequences over the environment through many and different aspects. These consequences are various, from the more and more extended area of construction up to gas emissions released during materials manufacture and transportation, construction process, exploitation of buildings and, finally, their deconstruction. The concrete, the most used material in construction industry all over the world, must become green...
Autori: Catalina Mihaela Gradinaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28138

ENVIRONMENTAL PROTECTION IN ROMANIA: PERCEPTIONS VERSUS ACTIVE PARTICIPATION
Environmental Engineering and Management JournalVol. 19Nr. 2
This study aims to measure the environmental concern in Romania, to investigate its state of fact at regional and county levels and to provide a better understanding of its determinants. Using data from World Values Survey (2010-2014), there were firstly analyzed the perceptions (care for environment, perspective on environmental pollution, alternative between protecting environment vs. economic growth), then active participation (membership in an environmental organization, financing ecological...
Autori: Simona-Roxana Ulman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28147

MACROSPHERICAL POROUS METALLOSILICATE MATERIALS: CHARACTERIZATION AND APPLICATIONS
Environmental Engineering and Management JournalVol. 19Nr. 2
The main goal of this work was to develop a cheap and easy method for the synthesis of the porous metallosilicate macrospheres. Zirconium silicate macrospheres with diameters in the range 1.5 – 1.6 mm were obtained by the spray gelling technique, using the multi templating method. Tetraethyl orthosilicate was used as silica source. The chitosan played a dual role (pore and shape generating agent), while other inexpensive and easily accessible biomaterials including yeast, sugar and gelatin...
Autori: Emil Ioan Mureșan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28148

COMPARATIVE STUDIES REGARDING MOLYBDATE ADSORPTION ONTO MgnFe LAYERED DOUBLE HYDROXIDES OBTAINED FROM REAGENT AND WASTE SLUDGE
Environmental Engineering and Management JournalVol. 19Nr. 2
Molybdate anions are used in a lot of fields and represent an essential trace element for plant and animal life; however, excessive amounts can cause adverse effect on various organism and environment. Therefore, in the present paper the adsorption performance of MgnFe- layered double hydroxides in the removal process of molybdate from aqueous solutions was studied. The layered double hydroxide (LDH) was synthesized by co-precipitation at low oversaturation method. Different ratio between Mg and...
Autori: Alin Golban
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28152

CONGO RED REMOVAL FROM AQUEOUS EFFLUENTS BY ADSORPTION ON CHERRY STONES ACTIVATED CARBON
Environmental Engineering and Management JournalVol. 19Nr. 2
Soluble dyes are intensively used in various industrial activities. They represent an important class of water pollutants from which they are rather difficult to remove. This paper focusses on the elimination of Congo Red (CR) ionic azo dye by adsorption on a low cost material. Cherry stones were used for activated carbon preparation by carbonization method. A temperature of 600 °C and a time of 4 h were found as adequate parameters for the physical activation and led to a final white powder...
Autori: Cristina-Gabriela Grigoraș
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28153

PROCESS WATER TREATMENT IN A THERMAL POWER PLANT: CHARACTERISTICS AND SEDIMENT/SLUDGE DISPOSAL
Environmental Engineering and Management JournalVol. 19Nr. 2
The industrial water quality of a thermal power plant is of high importance, and a process water treatment station being always required. Whatever the adopted treatment system is, it is accompanied by the production of different amounts of sediment and sludge, which must be disposed and valorized. This paper presents in detail, the physical-chemical treatment system applied for the industrial water production in a Romanian thermal power plant (Veolia Energy Iasi Co.), referring to its installati...
Autori: Dorina Stănciulescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28154

FIXED-BED-COLUMN STUDIES FOR METHYLENE BLUE REMOVAL BY CELLULOSE CELLETS
Environmental Engineering and Management JournalVol. 19Nr. 2
The Cellets product represents a cellulose material, which combines different properties such as the perfect sphericity, fine particle size distribution, low friability and solubility, and inertness. The experiments were carried out with Cellets 200 granulated celluloses used as a filling material for a laboratory glass column, using diluted dye solution (9-10 mg of dye /L of solution) at adequate initial pH (4.7). The effect of flow rate was investigated, and the modeling of experimental data f...
Autori: Iulia Nica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28155

REMOVAL OF METHYL ORANGE AND CADMIUM FROM SOLUTION USING MODIFIED ACTIVATED CHARCOAL
Environmental Engineering and Management JournalVol. 19Nr. 2
In this work, the removal of methyl orange (MO) and Cd2+ by simultaneous adsorption on adsorbent obtained from modified charcoal (BCBH) coated with TiO2 has been studied. The synthesized materials obtained from wood branches were characterized using atomic force microscopy (AFM) for the roughness and SEM to determine the morphology of the surface. EDX spectroscopy indicates the presence of C, N, O, Na, K, P and Ti on the surface of the adsorbent materials. The micro-porosity and BET specific sur...
Autori: Nicoleta Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28157

AGRI-WASTES AS A LOW-COST ADSORBENT FOR NICOSULFURON HERBICIDE
Environmental Engineering and Management JournalVol. 19Nr. 2
The contamination of aquatic and terrestrial environments by pesticides is highlighted by their possible toxic properties and poor biodegradability on the environment. The development of low cost by products from agricultural sectors as a suitable solution for contaminated areas remediation is of great environmental interest. Straw wastes can be considered as a promising alternative to remove different chemical compound that are environmentally toxic. In this study, some materials derived from ...
Autori: Irina Gabriela Cara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28161

STUDY OF HEAVY METAL DYNAMICS IN SOIL
Environmental Engineering and Management JournalVol. 19Nr. 2
The paper covers the results of a study, carried out during 2005 and 2018, regarding the impact of sludge dump of a wastewater treatment plant from Iasi city, Romania, on the soil characteristics. Experimental research was conducted to highlight the evolution of the heavy metal content of both the material in the storage site and the soil in its proximity. The following heavy metal concentrations were analyzed with atomic adsorption spectrometry method: Zn, Ni, Cr, Pb, Co, Cu and Cd. Research ha...
Autori: Georgiana Cezarina Bartic Lazăr
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28164

PREPARATION OF NEW INORGANIC POLYMER FLOCCULANT AND ITS APPLICATION IN OILY SLUDGE
Environmental Engineering and Management JournalVol. 19Nr. 3
Sodium silicate, iron sulfate, magnesium sulfate, and zinc sulfate were used as the raw materials to prepare a new inorganic polymer flocculant, polysilicate ferric magnesium zinc (PSFMZ), using direct recombination. The effects of molar ratio of zinc to silicon, ratio of iron to magnesium, reaction temperature, and reaction time on deoiling rate were explored. The optimal synthesis conditions for the flocculant for the thermal-washing treatment of oily sludge were determined. Results showed tha...
Autori: Lanlan Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28165

OUTLIER ROBUST IDENTIFICATION OF THE THERMAL POWER PLANT: COMBUSTION CONTROL AND VIBRATORY TRANSPORT
Environmental Engineering and Management JournalVol. 19Nr. 3
The goal of this paper is to contribute to environmental improvement. This goal has been achieved by the development of an algorithm that allows the optimization of fuel consumption and transport of combustion products. The paper considers the outlier – robust recursive algorithm. This algorithm is used for identification of multivariable ARMAX (Autoregressive Moving Average with Exogenous Variables) models. In this paper, we introduce pseudo-Huber loss function which is a continuous nonli...
Autori: Vojislav Filipovic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28167

METALLURGICAL WASTE VALORIZATION FOR FABRICATING GLASS-CERAMICS MATERIALS
Environmental Engineering and Management JournalVol. 19Nr. 3
The valorization of a metallurgical waste (i.e., an iron-rich slag) as raw material for the fabrication of high hardness glass-ceramics using differential thermal analysis, X-ray diffraction, X-ray fluorescence and scanning electron microscopy was investigated. The melting of the slag was aided by the addition of waste glass cullet (WGC) and the vitrification field of this system was investigated. The non-isothermal crystallization kinetics of the parent glass with the highest slag content was s...
Autori: Erika Iveth Cedillo-González
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28168

LOCAL COMMUNITIES AND MUREȘ FLOODPLAIN NATURAL PARK ROMANIA: A COMMON FIGHT AGAINST INVASIVE SPECIES
Environmental Engineering and Management JournalVol. 19Nr. 3
Invasive plant species, like Indigo bush (Amorpha fruticosa L.), Boxelder (Acer negundo L.), Japanese knotweed [Fallopia japonica (Houtt.) Ronse Decr] are altering the conservation status of terrestrial ecosystems along the MureÈ™ Floodplain Natural Park in Romania. On a long run, and a large geographic scale, the invasive species have a high potential to generate a negative impact on the environment and the economy. Hence there is a stringent need of preventing, tracking down, and controlling i...
Autori: Oana Brînzan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28170

TURKISH ARCHITECTS’ VIEWS ON CONSTRUCTION AND DEMOLITION WASTE REDUCTION IN THE DESIGN STAGE
Environmental Engineering and Management JournalVol. 19Nr. 3
Waste is one of the main environmental problems of the twenty-first century. The construction industry plays a critical role in this problem. Reducing construction and demolition (C&D) waste to a minimum is crucial considering its negative impacts on nature, human health and economies. Determining designers’ awareness levels about the fact that the majority of waste generated in all life stages of buildings are largely based on design-related decisions and this waste can be reduced in ...
Autori: Burcu Salgın
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28172

MICROSTRUCTURAL AND PHYSICAL CHARACTERIZATION OF SOLID WASTES FROM CLAY BRICKS FOR REUSE WITH CEMENT
Environmental Engineering and Management JournalVol. 19Nr. 4
This study aims to evaluate the properties of different wastes obtained from four red ceramic brick industries in the northern region of Santa Catarina, Brazil. The characterization of the clay brick waste (CBW) was performed using the XRD techniques, XRF, FTIR, DTA and SEM. Techniques to determine the pozzolanic activity, particle size, B.E.T. surface area and specific mass were used. The consumption of calcium hydroxide (CH) in the cementitious pastes with the CBWs was also measured. An app...
Autori: Adilson Schackow
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28184

CLAY COMPOSITE WATER FILTERS: THE CASE OF FLUORIDE, NITRITE AND Escherichia coli REMOVAL
Environmental Engineering and Management JournalVol. 19Nr. 4
Inorganic ceramic materials is receiving more attention in recent times due to their unique characteristics which include different pore structures, hydrophilic surfaces, high chemical, thermal and mechanical stabilities that offer avenues for application in water treatment. In the present work, cost-effective clay ceramic water filters of different designs were developed from clay (50, 60, and 70) %, sawdust (15, 20, 25, and 35) %, grog (5, 10 and 15)% ratios plus 5% bone char by volume and ...
Autori: Enyew Amare Zereffa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28196

CHARACTERIZATION AND PERFORMANCE OF POLYMER COMPOSITE MEMBRANES FOR THE REMOVAL OF HUMIC SUBSTANCES FROM WATER
Environmental Engineering and Management JournalVol. 19Nr. 5
This present study, investigates the performance of activated sardine scale powder (ASSP)/ Cellulose acetate (CA)/Polyvinylpyrrolidone (PVP) and powdered activated carbon (PAC)/ Cellulose acetate (CA) / Polyvinylpyrrolidone (PVP) composites membranes prepared by phase inversion for the elimination of humic substances (HS) from aqueous solutions. The materials and composites membranes were characterized by FTIR, XRD, SEM analyses. Overall, the results exhibit the higher performance of ASSP /CA/ P...
Autori: Naziha Sid-Sahtout
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28199

DENTAL RADIOLOGY FROM AN ECOLOGICAL PERSPECTIVE. THE ATTITUDE OF DENTISTS REGARDING THE MANAGEMENT OF THE MATERIALS USED IN DENTAL RADIOLOGY
Environmental Engineering and Management JournalVol. 19Nr. 5
The films and the developing solutions used with radiological films contain a number of harmful substances that are very toxic to the environment, as well as to the living organisms, particularly aquatic organisms. Therefore, this type of toxic waste requires simple, but adequate collection and treatment measures, in order to be transformed into environmentally friendly products. This paper reviews the existent knowledge and the methods for the management of this special waste in dentistry-rela...
Autori: Mariana Constantiniuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28201

RECYCLING OF LIGHT-EMITTING DIODE WASTE QUARTZ SAND ACTING AS A POZZOLANIC MATERIAL FOR PORTLAND CEMENT
Environmental Engineering and Management JournalVol. 19Nr. 5
LED waste quartz sand (LEDWS), which is a prominent by product of the LED manufacturing process, may contaminate the environment because it comprises specific heavy metals (e.g., As and Cu), which are hazardous ingredients to the environment when disposed of improperly. Therefore, this study investigated the use of light-emitting diode (LED) waste quartz sand to partially replace Portland Type I cement (OPC) to evaluate the feasibility of reusing it as a pozzolanic material. The SiO2, Na2O, and ...
Autori: Kae-Long Lin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28207

SYNERGISTIC EFFECT OF FUEL AGENTS AND MASS RATIO FOR MORPHO-STRUCTURAL OPTIMIZATION OF MAGNETIC CLAYBASED NANOCOMPOSITES WITH HIGH ADSORPTION CAPACITY
Environmental Engineering and Management JournalVol. 19Nr. 5
The study is focused on creating magnetic mesoporous materials through the insertion of a nickel ferrite into the structure of kaolintype clay. Sol-gel auto-combustion method was employed to synthesize the materials, using glycine and tartaric acid as chelating/combustion agents. This is the first study on the combined effect of different fuel agents and of clay-to-ferrite molar ratio on the structural, textural, magnetic and adsorptive properties of nanocomposites. The value of the average por...
Autori: Stefana Cojocaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28210

PHYSICAL STATUS OF TORRENT CONTROL STRUCTURES IN ROMANIA
Environmental Engineering and Management JournalVol. 19Nr. 5
Torrential watershed management actions should be integrated and their results designed to last for a long time. In Romania and in other countries, these actions cover the entire area of the watershed (slopes, banks, and riverbeds). They consist of complex sets of structural and non-structural measures and works designed to control runoffs and erosion, protect social-economic objectives and improve degraded lands. The most vulnerable structures are the hydrotechnical structures, which are place...
Autori: Alin-Lucian Mihalache
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28211

REMOVAL OF FLAME RETARDANTS FROM THE NON-METAL FRACTION OF THE PROCESSED WASTE PRINTED CIRCUIT BOARDS USING ORGANIC SOLVENTS AND PYROLYSIS
Environmental Engineering and Management JournalVol. 19Nr. 6
Printed circuit boards are the most important component of any electrical and electronic device. The average metal content in waste printed circuit boards is ~30-35% whereas the rest of the material is a non-metal fraction (NMF). Metals in the waste printed circuit boards are recycled for their value whereas the NMF is mostly sent to landfills or incinerators for disposal. The circuit board laminates contain flame retardant chemicals that pose potential hazards to the environment and to public h...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28216

BUILDING INFORMATION MODELING APPLICATION FOR GROUNDWATER RECHARGE: DEVELOPMENT OF MULTIPLE STRUCTURES
Environmental Engineering and Management JournalVol. 19Nr. 6
Globally the researchers are identifying the new ways for better urban sustainability. One major issue in the current world is the lack of fresh water availability in cities due to rapid increase in the population. To meet water requirement, scientist are exploring different ways to enhance the groundwater recharge capacity. One such solution is the use of building information modelling (BIM) technology to identify multiple structures that can be constructed to provide the potential recharge. T...
Autori: Ahsen Maqsoom
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28218

ENVIRONMENTAL PERFORMANCES OF LONG-SPAN BEAMS
Environmental Engineering and Management JournalVol. 19Nr. 6
In the last decades, the effects of the climate change phenomena and the consumption rates of raw materials have led to an increasing awareness regarding the need of implementing the sustainable development concept at the global scale. The activities we complete each day have a direct negative influence over the current situation of the natural ecosystems, and therefore it is highly important to understand and reduce at the same time our global environmental footprint. One of the most significa...
Autori: Sebastian George Maxineasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28219

ADDITION OF ADAPTED MICROORGANISMS FOR LEAF COMPOSTING
Environmental Engineering and Management JournalVol. 19Nr. 6
Techniques such as composting, a controlled process of decomposition of organic materials, have become fundamental to minimize the problems associated with the organic fraction of urban solid waste, as the potential to cause damage to public health, the environment and, consequently, to economic and administrative aspects can be related to this kind of waste. Microbial activity is also highlighted as a relevant factor since the microorganisms are fundamental in the degradation of organic matter...
Autori: Priscila da Costa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28222

INSTRUMENT FOR ASSESSING THE SUSTAINABLE INNOVATION CAPACITY OF PROFESSIONALS IN CONSTRUCTION
Environmental Engineering and Management JournalVol. 19Nr. 6
Architects and engineers play an important role in the choice of innovative and environmentally sustainable materials and techniques. To define these materials and techniques, they mobilize competencies acquired throughout their lives. To learn the profile of the environmentally innovative architect and engineer in Brazil, we created a self-assessment instrument that allows us to identify essential characteristics in practice, namely, which competencies are mobilized when they choose an environ...
Autori: Elaine Resende
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28223

SPECTROSCOPY STUDY OF HERITAGE OBJECTS FOR THE DIGITIZATION OF CULTURAL HERITAGE
Environmental Engineering and Management JournalVol. 19Nr. 6
Cultural heritage objects represent valuable testimonies of the past, which must be kept in the right condition to transmit to future generations. Together with the spectacular progress recorded by humankind regarding technology, opportunities to obtain valuable data on heritage objects so as to preserve them have started to emerge. The current researchers aimed to determine the internal composition of the colors and materials used in some paintings from a historic wooden church monument, from ...
Autori: Elena Demenchuk
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28230

FAST REMOVAL OF MALACHITE GREEN FROM AQUEOUS SOLUTIONS USING HIGHLY HYDROPHOBIC WATER‒DISPERSIBLE MAGNETIC NANOCOMPOSITE
Environmental Engineering and Management JournalVol. 19Nr. 7
Release of dyes without performing adequate treatment into the water can lead to environmental risk and serious health problems. The development of effective and economic adsorbent materials for the removal of dyes from industrial wastewaters has gained great consideration in recent years. In the present study, a novel bio-based nanocomposite has been developed for ultrasoundassisted adsorption of malachite green (MG) from aqueous solutions. The synthesized adsorbent consisting of both hydropho...
Autori: Mohsen Nekoeinia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28232

PHOTOCATALYTIC DEGRADATION OF DISPERSE BLUE 56 BY Cu-Ti-PILCs AND Fe-Ti-PILCs
Environmental Engineering and Management JournalVol. 19Nr. 8
Pollution with aromatic hydrocarbon has been rising because of the extreme usage of benzene containing compounds. Most of the people, animals and plants have been exposed to aromatic hydrocarbons due to polluted water sources. The aim of the present work was to carry out an experimental study for the photocatalytic degradation of aromatic hydrocarbon containing compounds by irontitanium- pillared interlayered clays (Fe-Ti-PILCs) and copper-titanium-pillared interlayered clays (Cu-Ti-PILCs). For ...
Autori: Beytullah Eren
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28249

TURBULENT FLOW CHARACTERISTICS IN THE ERODED REGION OF THE SIDE-WALL BANK
Environmental Engineering and Management JournalVol. 19Nr. 8
An experimental inquest was performed to quantify the turbulent flow characteristics near the eroded region of an artificial sidewall bank at three different flow depths, and a comparison study is made between before and after erosion for two Reynolds numbers. Instantaneous flow velocities were taken with an acoustic Doppler velocimeter (ADV) at near bank of the vertical side wall. The mean flows and other turbulence quantities such as Reynolds shear stress, turbulent intensities, and turbulent ...
Autori: Krishnendu Barman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28264

PAY AS YOU THROW - SYSTEMS FOR MUNICIPAL WASTE MANAGEMENT: ITALIAN EXPERIENCES AND A NEW PROPOSAL
Environmental Engineering and Management JournalVol. 19Nr. 10
Pay as You Throw (PAYT) is a usage-pricing model for the disposal of Municipal Solid Waste. The implementation of the PAYT approach requires three main elements: a) measurement of the generated amount of waste; b) a means to identify the waste generator; c) the unit pricing for individual charging based on the amount of waste collected and services provided. The PAYT system splits the overall municipal solid waste tax into one fixed part, no-service dependent and a variable part related to the a...
Autori: Gaetano Drosi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28285

DESIGN AND CHARACTERIZATION OF CONTROLLED RELEASE PK FERTILIZERS FROM AGRO-RESIDUES
Environmental Engineering and Management JournalVol. 19Nr. 10
The aim of this study is to design and characterize a new controlled release fertilizers category by using valorization of residues from agri-food, industrial and post consumers activities normally allocated into landfill disposal. The underlying strategy in materials research fully agreed with the circular economy perspective and the more recent European legislation about critical raw materials recovering. This study covers the development of lightweight aggregates, based on a local red clay (k...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28286

HOW TO TURN CAR FLUFF PROBLEM INTO AN OPPORTUNITY
Environmental Engineering and Management JournalVol. 19Nr. 10
Car fluff is an important problem for the industrial compartment, especially for Italy, considering the huge amount of waste produced by the automotive sector, approx. 180.000 ton/year. Although car fluff (CER 191004) is suitable for CSS-Combustible production, with destination to cement factories, a very low amount of it reaches this destination. An alternative way to transform this problem into an opportunity consists into the transformation of bioliquid after its thermochemical transformati...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28289

SEPARATE COLLECTION OF MUNICIPAL SOLID WASTE AND FATE OF THE RESIDUAL UNSORTED FRACTION: A SCENARIO ANALYSIS
Environmental Engineering and Management JournalVol. 19Nr. 10
Three scenarios for the management of Municipal Solid Waste (MSW) produced in the study area of Bari (Southern Italy) were defined and evaluated in terms of separately collected material and fate of the residual fraction. The first scenario represented the bring points MSW separate collection system in the current configuration with a collection rate approx. 40%. The second scenario considered the study area in the optimal configuration, with a percentage of separate collection > 80% obtaine...
Autori: Sabino De Gisi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28293

AUTOMOTIVE RECYCLING: A CIRCULAR ECONOMY CENTRE
Environmental Engineering and Management JournalVol. 19Nr. 10
Every year 93 billion tonnes of raw materials are consumed, but only 9% of them are reused: a potential of about 3 trillion dollars worldwide, 88 billion in Italy, according to Growth Within: A Circular Economy Vision for a Competitive Europe by Ellen MacArthur Foundation with McKinsey. A vehicle is potentially recoverable, in its components for more than 95%, an industrialised process of treatment of end-life vehicles (ELVs). Optimising raw material recovery is currently possible and advantag...
Autori: Luca Pomili
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28295

DEVELOPMENT OF A SELECTION SYSTEM BASED ON HYPERSPECTRAL IMAGING FOR PLASTIC WASTE WITH BROMINATED FLAME RETARDANTS
Environmental Engineering and Management JournalVol. 19Nr. 10
Brominated flame retardants (BFRs) are used in different types of products such as plastic, textiles and electronic circuits with the aim to increase fire resistance and to avoid or to delay the propagation of accidental combustion. However, high concentrations of bromine in waste from electrical and electronic equipment (WEEE) hinder the possibility of their use as secondary raw materials. Furthermore, the possibility that BFRs can be released during mechanical recycling processes, imposes the...
Autori: Giuseppe Bonifazi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28296

EXPLOITING THE POTENTIAL OF POLYETHYLENE MECHANICAL RECYCLING: ECONOMIC AND SUSTAINABILITY ANALYSIS
Environmental Engineering and Management JournalVol. 19Nr. 10
Plastic and circular economy are key words that characterize our present and seek to address the future of the global social economic system. Plastic, on the one hand, is the emblem of modern times, a low cost material with unparalleled functional properties. Circular economy, on the other hand defines an alternative model to traditional economy that focuses on sustainability. In this work, the author presents a case study relating to a virtuous example of circular economy applied to the industr...
Autori: Leonardo Mita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28301

HOW TO DEAL WITH ORGANIC MUNICIPAL SOLID WASTE OVER-SIEVE FRACTION
Environmental Engineering and Management JournalVol. 19Nr. 10
The steady increase in separate waste collection has highlighted the urgent need to adequately deal not only with urban waste (differentiated and undifferentiated) but also with special waste produced by separate waste collection and recycling processes. Source collected municipal solid waste produces different waste streams. One of this is the organic fraction of municipal solid waste (OFMSW). This fraction is central for circular economy, since it can be further transformed in order to recove...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28302

PVCUPCYCLING - CIRCULAR ECONOMY AND ZERO WASTE: "UPCYCLING" WASTE FROM ELECTRICAL SYSTEMS
Environmental Engineering and Management JournalVol. 19Nr. 10
A circular economy system will allow company to directly operate an effective re-cycling policy. Establishing a new “zero waste” impact scheme, in order to recover by-products from the production process, thus leading to an increased market price in comparison to their economic value, and by doing so with full respect of the blue and circular economy standards applied to the product. The main objective of the PVC upcycling project is to facilitate the transition of R.ED.EL.’s ...
Autori: Consuelo Nava
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28304

DYNAMIC VISUALIZATION OF SPATIO-TEMPORAL PROCESS MODEL BASED ON NetCDF AND OPTIMAL INTERPOLATION FOR MARINE ENVIRONMENT
Environmental Engineering and Management JournalVol. 19Nr. 11
The ocean is an indispensable source of materials and energy for the survival of human beings and social development. It is also an essential factor affecting climate change and ecological balance. In view of the dynamic, three-dimensional (3D), and complex marine environment, this study proposes the construction and dynamic visualization of a marine spatio-temporal process model based on Network Common Data Form (NetCDF) and optimal interpolation. The proposed model combines the advantages of ...
Autori: Xu Shenghua
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28315

KNOWLEDGE TRANSFER IN UNIVERSITY-INDUSTRY RESEARCH COLLABORATION FOR EXTENDING LIFE CYCLE OF MATERIALS IN THE CONTEXT OF CIRCULAR ECONOMY
Environmental Engineering and Management JournalVol. 19Nr. 11
This paper addresses the direct transfer of knowledge from university to manufacturing industrial sector, providing solutions to transform production/manufacturing waste into resources and closing loops in the process according to circular economy values. For this purpose, eco-innovation and eco-design were selected and discussed in order to be applied as tools to support knowledge transfer in the context of circular economy. These tools are focused on the re-design of process and products found...
Autori: Petronela Cozma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28328

SALINE-SODIC SOIL RECLAMATION WITH STABILIZED SEWAGE SLUDGE AND RECYCLED WASTEWATER
Environmental Engineering and Management JournalVol. 19Nr. 12
Saline-sodic soil reclamation can be enhanced with a sustainable and environmental approach by using organic waste materials. Moreover, wastewater can be used in leaching processes to protect freshwater resources in regions with water shortages. The aim of this study was to reclaim saline-sodic soil by using recycled wastewater and stabilized sewage sludge together with gypsum. The experiment was designed with three replicates using four different sewage sludge doses (0, 4, 8 and 12 kg m-2), an...
Autori: Almujtaba Hassbalrassol Muhammed Abdallh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28330

ANALYSIS OF CO2 EMISSIONS BETWEEN CONSTRUCTION SYSTEMS: LIGHT STEEL FRAME AND CONVENTIONAL MASONRY
Environmental Engineering and Management JournalVol. 19Nr. 12
Since the emission of greenhouse gases is an important environment issue, this paper presents an analysis of CO2 emissions between two different building methodologies: conventional masonry and light steel frame. To this end, a 70m² building project used in Social Brazilian Housing Programs (SBHP) built according to both methods was analyzed. In addition to that, the quantitative materials used were determined, according to the building services (infrastructure, superstructure, closing and...
Autori: Silmara Dias Feiber
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28332

REMOVAL OF OIL FROM OILY SLUDGE BY MICRO-EMULSION METHOD
Environmental Engineering and Management JournalVol. 19Nr. 12
At present, the production of oily sludge is huge, and the micro-emulsion method can effectively separate crude oil and water from the oily sludge by reducing the interfacial tension between oil and cement. In this paper, the micro-emulsion was prepared by using surfactants, such as sodium dodecyl benzene sulfonate (SDBS), cetyltrimethylammonium chloride (CTAB), sodium dodecyl sulfonate (SDS), sodium cetyl sulfate (CAS), and alkylphenol polyoxyethylene ether (OP-10) as the main raw materials. T...
Autori: Lanlan Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28344

Sus

Acasa · Carti editate · Reviste · Despre editura · Abonament · Contact · Cos cumparaturi · Cum platesc? · Termeni si conditii
VisaMaster CardPayU

2001 - 2026 © Copyright Editura EcoZone Iasi Toate drepturile sunt rezervate.
Gazduire skaleweb.ro

SkaleWeb