Abstract Literature data show that in general, plastics produced through the mechanical recycling route involve less carbon dioxide emission than when produced from crude oil. A review of readily available data shows that road transport of untreated waste plastics account for a significant portion of the carbon dioxide emission generated during recycling. Therefore, much carbon dioxide emission can be saved by optimizing the logistics in the recycling of plastics. On the example of polyolefi...
Autori: Peter C. Rem, Stig Olsen, Jan-Henk Welink, Norbert Fraunholcz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25442

Abstract The mass of usage of secondary plastics are mostly determined by their quality and price. Therefore it was essentially to collect and evaluate the related aspects and expectations from the potential secondary-plastics users. To enable this in the frame of the W2Plastics EU7 project (Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste) an adequate questionnaire was worked and sent out to automotive plastics end-product man...
Autori: Andrea Toldy, Brigitta Bodzay, Mircea Tierean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25443

AbstractThe paper presents the research made on the FP7 project „Magnetic Sorting and Ultrasound Sensor Technologies for Productionof High Purity Secondary Polyolefins from Waste” in order to develop a magnetic fluid equipment for sorting of polypropylene(PP) and polyethylene (PE) from polymers mixed waste streams. Because both PP and PE float in water, it is difficult to separateone from the other. The paper presents the principles of inverse magnetic density separation process and the results ...
Autori: Bin Hu, Francesco Di Maio, Guillaume Houzeaux, Liana Baltes, Mircea Tierean, Peter Rem
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26028

Abstract The aim of this paper is to determine the heat of combustion of plastic wastes resulted from municipal solid waste, automotive shredder facility waste and building and construction waste. The plastic wastes have been separated by flotation technique using as flotation media: water, ethanol, their mixtures and magnetic fluid. Resulted fractions have been analyzed aiming to determine the most effective fraction from the heat of combustion point of view. The obtained results have been ...
Autori: Liviu Costiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26750

Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

Abstract In the present study, several selected formulations based on recycled (rPP) or virgin polyolefins (vPP) and lignocelluloses were prepared and subjected to microorganism attack. Biodegradation tests were performed with microbial strains belonging to fungal genera, like Aspergillus, Penicillium and Fusarium. The initiation of biodegradation was demonstrated by Scanning Electron Microscope (SEM) micrographs showing the colonization of surface samples by microbial strains. The crystalli...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26879

Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processi...
Autori: Maria Râpă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27493

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646