ecozone editura ecozone iasi

» Autentificare

E-mail:
Parola:
   
  Cont nou
Va rugam sa va autentificati pentru a putea comanda carti

» Cautare

  » Ultimele cautari

Rezultatele pentru recycled aggregate concre

Rezultate gasite: 147

Process water of papermaking: model building and characterization
Environmental Engineering and Management JournalVol. 6Nr. 4
Actual trends in papermaking concern on the use of recycled fibers and minimizing effluent volume by closing water circuit. Beside environmental and economic advantages, both trends can lead to serious problems in papermaking processes due to contaminants introduced with recycled fibers and their accumulation in closed water system. A key factor to avoid disturbances in the papermaking is to prevent the accumulation of detrimental compounds. In this respect, first it is necessary to find out met...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25134

Floodplain revegetation and river basin restoration
Environmental Engineering and Management JournalVol. 6Nr. 4
AbstractDuring the modern history the ability of plant roots to consolidate and strengthen the soil was exploited twice in France: once in1867 by Joseph Monier who created the reinforced concrete, and then in 1962 by Henry Vidal who created structured soils.The paper presents the some results obtained on the ecological protection of floodplain in major riverbeds. The aerodynamic modeling represents an efficient, economic and easy way to work with. The main condition of successful experiments is ...
Autori: Ana Virsta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25136

Effects of water level fluctuation on reproduction and spawning habits of fish species in lake Balaton
Environmental Engineering and Management JournalVol. 6Nr. 5
AbstractIn 2004, the types of shoreline were estimated on Lake Balaton, such as rip-rap covered, reedy, concrete or grit. Exact area of a specific face of a rock in the rip-rap covered parts can be determined by digital image analysis. Wetted rocky area of the shore was estimated as a function of water level in 10 cm steps of level changes. Taking into account the reproduction characteristics of the studied fish species (Cyprinidae) the potential substrates for spawning are dominantly the shallo...
Autori: Gabor Borbely, Gabor Paulovits, Laszlo G. Toth, Nora Kovats
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25204

Environmental Engineering and Management Journal, Vol. 3 Nr. 3 (II)
Environmental Engineering and Management JournalVol. 3Nr. 3
Contain all the articles from this issueICEEM/02 - ENVIRONMENTAL ENGINEERING SECTION"Treatment Technologies for Gaseous Fluxes"Surface chemistry studies on molybdena–alumina catalystTatiana Yuzhakova, ?kos R?©dey, Endre Domokos, J??zsef Kov??cs, Monica Caldararu, Cristian Hornoiu, Mariana Carata, G.Postole, Cornel Munteanu, Larisa Strukova, Jozse FazakasHebicidal behaviour of a new N,N'- biquaternary salt of 4,4'- bipyridineServilia Oancea, Marinela Irimia, Gabriela Carja, Anton Airinei, Nicu...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25189

Polyelectrolyte - surfactant complexes
Environmental Engineering and Management JournalVol. 6Nr. 6
AbstractThe formation of the polyelectrolyte- surfactant complexes has been studied. On this purpose has been measured the critical micelle concentration for every polyelectrolyte and surfactant which had been used. The phase behaviour of mixtures of a cationic polyelectrolyte (Praestol 611) and an anionic surfactant (sodium lauryl sulphate - SLS) has been studied. For a given polyelectrolyte concentration, with increasing surfactant concentration, three phase regions were identified. The first ...
Autori: Cristina Costache, Gabriel Dabija, Mihaela Mihai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25214

Effects of coagulants on the DCS accumulation in process water of papermaking
Environmental Engineering and Management JournalVol. 7Nr. 3
AbstractAdvanced closing of paper machine circuits results in the accumulation of the dissolved and colloidal substances (DCS) in the process water. At a critical concentration, the DCS are destabilizing even by small variations in paper machine parameters, producing operational and product quality problems. This article presents results of lab experiments simulating the process water recycling in short circuit of paper machine, without and with addition of fixing agents. Tests were performing w...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25261

Relationship between composition of the lignin-based interpolymer complex and its structuring ability
Environmental Engineering and Management JournalVol. 7Nr. 4
AbstractA new environmentally friendly lignosulfonate-based glue (LSG), which represents the lignin-containing interpolymer complex, has been developed for structuring sandy soils. It has been found that the changes in the LSG composition result in a change in its rheological properties, which are associated with the LSG binding ability and, thereby, have to influence the fractional composition and properties of the created soil aggregates. ...
Autori: Galia Shulga, Julia Brovkina, Juris Ozolinš, Olga Aniskevicha, Talrits Betkers
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25289

Energy from biomass in pulp and paper mills
Environmental Engineering and Management JournalVol. 7Nr. 5
AbstractPulp and paper mills generate various quantities of energy-rich biomass as wastes, depending on technological level, pulp and paper grades and wood quality. These wastes are produced in all stages of the process: wood preparation, pulp and paper manufacture, chemical recovery, recycled paper processing, waste water treatment. Energy recovery from wastes of different origin has become a generally accepted alternative to their disposal. Pulp and paper industry expresses an interest in adap...
Autori: Dan Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25307

Biomass - A source of chemicals and energy for sustainable development
Environmental Engineering and Management JournalVol. 7Nr. 5
AbstractNowadays, energetic utilization of biomass, biotechnology attracts a big attention not only from the environmental point of view but also have a social, political and economical impact. According to the Directive 2003/30/EC of the European Parliament and the European Council the emission of greenhouse gases can be reduced by 49% using bioethanol produced by a manufacturing process based on corn, instead of crude oil based fuels. Moreover in Hungary from 1st of July 2007 only gasoline wit...
Autori: , , Gyula Marton, , Jenő Hancsók, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25312

Studies on equipment corrosion in catalytic reformation of C1 - C5 fraction
Environmental Engineering and Management JournalVol. 7Nr. 6
AbstractObservations and data regarding the intense corrosion and deposit phenomena of the carbon steel tube bundle of the heat exchanger are presented. The bundle ensures the cooling of the light fraction C1 - C5 from the top of the distillation column which carries out the removal of pentane and smaller derivates into the RC equipment. Chemical and mineralogical analyses confirm the aggressive action of the fluids flowing through the exchanger. Tests have been done in order to replace the carb...
Autori: Ana-Daniela Georgescu, Lucian Georgescu, Maria Apostolescu, Nicolae Apostolescu, Ovidiu Georgescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25333

Solid waste management practices in Penang state: A review of current practices and the way forward
Environmental Engineering and Management JournalVol. 8Nr. 1
AbstractSolid waste management problems proved to be complex in origin and in solution. The rapid economic development and population growth experienced by the State of Penang, Malaysia have resulted in a tremendous increase in the quantities and types of solid wastes generated. Domestic solid waste is the most visible consequence of this economic development. However, considerable amounts of this waste could be recycled and reutilized if separated. This paper reviews the current status of solid...
Autori: Abdelnaser Omran, Abdelsalam O. El-Amrouni, Abdul Hamid Pakir, , Latifa K. Suliman, Mahyuddin Ramli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25353

An experimental three-stage hybrid constructed wetland system for removal of organics and nutrients from domestic wastewater
Environmental Engineering and Management JournalVol. 8Nr. 1
AbstractAn experimental three-stage subsurface flow constructed wetland system was investigated for the removal of nutrient and organic matter from primary-treated domestic wastewater. Built in the Turkey Scientific and Technical Research Council-Marmara Research Center, Gebze, Turkey (Istanbul), the system consisted of a vertical flow-gravel filtration in the first stage, a horizontalsubsurface flow bed vegetated with Iris in the second stage, and a vertical-subsurface flow bed vegetated Phragm...
Autori: Bilal Tuncsiper
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25358

Environmental Engineering and Management Journal, Vol. 8 Nr. 4
Environmental Engineering and Management JournalVol. 8Nr. 4
â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

Environmental Engineering and Management Journal, Vol. 8 Nr. 5
Environmental Engineering and Management JournalVol. 8Nr. 5
â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

Preliminary study of simple and Fenton oxidation with hydrogen peroxide applied on final effluents from a zootechnical farm
Environmental Engineering and Management JournalVol. 8Nr. 3
Abstract The paper presents the preliminary experimental results performed at laboratory scale set-up for different combined mechanochemical treatments of final effluents from a zootechnical farm from the central Moldavian region of Romania. Because of the high content of pollutants into wastewaters, the soil can be polluted and also the ground waters. To avoid this soil pollution episode, some combined mechano-chemical processes were studied and applied into a specific technological order as...
Autori: Carmen Zaharia, Mioara Surpăţeanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25434

Non-ferrous heavy metal metallurgy wastewater treatment by the electro-floto-coagulation method
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract Electroflotocoagulation is used for the treatment of liquid wastes of various origins, containing suspended matter. The metal hydroxide formed by electrochemical metallic ions generation acts to aggregate the colloidal impurities, and the hydrogen bubbles evolved at the cathode allow flotation of foam containing the impurities. The aggregates formed (containing the impurities) and lifted above the solution can then be removed. Electroflotocoagulation (simultaneous electrocoagulation ...
Autori: Marius Constantin Mirica, Mirela Ioana Iorga, Adina Segneanu, Ionel Balcu, Doru Buzatu, Cristian Vaszilcsin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25457

Olt river monitoring and quality assessment
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract This paper aims to present an assessment of Olt River water quality along Brasov county area, using data acquired during 2005- 2007. Olt River is an important river in Romania, and its basin is covering almost 10 counties, which main part of its middle section passes Brasov County. Olt River is providing water for industry, agriculture and human use, but is also collecting treated and not treated wastewaters from different sources. Two important sampling sites were studied: Feldioar...
Autori: Mihaela Sica, Dorina Dragan, Ramona Furnica, Camelia Draghici,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25467

Utilization of waste materials in concrete production for sustainable development
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract In order to reduce the cement content used in concrete production utilization of waste materials for substitution of a part of cement can be considered. In this study, two pozzolanic-waste materials, silica fume and fly ash, are used as a part of cement up to 12% and 40%, respectively in concrete and compressive strength as well as permeability properties were determined. The test results were evaluated by using the response surface method. By keeping the cement content in concrete c...
Autori: Dogan U. Anil, Ozkul M. Hulusi, Ekincioglu Ozgur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25490

The product's anticipated success ratio on the turbulent markets: A genuine tool for the agile enterprises
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract To become "flexible" is the equivalent of becoming successfully for almost any firm - the activities based on old and traditional product "recipes" are, obviously, excluded. But, in the framework of a global economy crisis, the statistics seems to prove that flexibility is no longer enough in order to avoid troubles. At the same time, another statistics prove that almost 80% of the products are failing at their first release on market. The paper presents a genuine marketing aggregate...
Autori: Gabriel-Petru Luca, Ion Verzea, Irina Cozminca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25511

The advertising efficiency ratio: A marketing aggregate indicator modeling for a noisy and turbulent market
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract This paperwork is trying to achieve some of theoretical and practical objectives concerning the "agility" concept: to make the differences operational, and to ensure the present surviving and the future development of economical activities in a, more and more, turbulent business environment. Also, the paperwork comes to display a genuine aggregate indicator "Advertising Efficiency Ratio", special developed to help the market players to face - throughout their advertising process - th...
Autori: Gabriel-Petru Luca, Ion Verzea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25513

Wastes used in obtaining polymer composite
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract In the paper is analyzed the possibility of using some industrial wastes for obtaining new building materials. From the industry or from the power station a lot of by-products or wastes have resulted and their storage is a big problem for the environment. In the building material industry a part of these wastes can be used in different ways: for replacing the cement, as addition in concrete, as component of cements, in the mixture of polymer concrete, etc. In the present investigati...
Autori: Marinela Bărbuţă, Nicolae Taranu, Maria Harja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25525

Overview on paper and board recycling in Europe
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract In Europe, recovered paper is a valuable raw material for the paper industry already since the early 20th century, actually corresponding to half of the total use of fibres for paper and board production. The aim of this paper is to describe the present status of paper recycling in Europe and thereby to create a data basis for evaluation the results of the FP7 project ?Recovered Paper Sorting by Innovative Technologies ? SORT IT. The overview is based on specific questionnaires addre...
Autori: Dan Gavrilescu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25579

The treatment and minimization of metallurgical slag as waste
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract The slags are an important waste and by-products of metallurgical industry. The present paper summarizes results obtained from physical and chemical analyses on metallurgical slag provided from S.C. ?Mittal Steel Galati? S.A. The physical structure and gradation of granulated slag depend on the chemical composition of the slag, its temperature at the time of water quenching, and the method of production. The following mineralogical components were noticed through bypowder X-ray diffr...
Autori: Maria Cioroi, Licuta Nistor Cristea, Igor Creţescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25588

Analysis of factors determining the behaviour of chromium in some romanian soils
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract Chromium (Cr) is one of the most common metal contaminants in soil because of its use in ore refining, production of steel and alloys, metal plating, tanneries, wood preservation, and pigmentation. In soil environment, the most stable oxidation states of chromium are Cr (III) and Cr (VI). While Cr (III) is considered an essential trace element for the functioning of living organisms, Cr (VI) is toxic and carcinogenic to humans via inhalation for long exposures, since it is easily sol...
Autori: Dumitru Bulgariu, Laura Bulgariu, Maria Gavrilescu, Raluca Maria Hlihor, Vasile Lucian Pavel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25590

Calendula officinalis L., diclorphenoxiacetic acid (2,4 D), mutagenic, polyphenolic acids
Environmental Engineering and Management JournalVol. 9Nr. 1
Abstract The former Arad Chemical Fertilizer Plant had an important polluting effect on environment and, although it was shut down in 1990, its environmental heritage still exists. The paper contains a short description of the former plant and its impact on the environment, mainly on the quality of water and soil and emphasizes the effects of polluting heritage that still exists. Today, one of the major problems on the platform of the former Fertilizer Plant is the existence of all concrete b...
Autori: Aurica Grec, Florin Dumescu, Ladislau Klein
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25599

Environmental Engineering and Management Journal, Vol. 9 Nr. 5
Environmental Engineering and Management JournalVol. 9Nr. 5
? SUSTAINABLE CONCRETE HARDENING PROCESSES IN NORMAL CLIMATIC AND THERMAL TREATMENT CONDITIONS ? THE ENVIRONMENTAL DIMENSION ? AN INTERDISCIPLINARY RESEARCH AREA ? MENU PLANNING STRATEGY BASED ON ECOLOGICAL FOOTPRINT ? EVALUATING ENVIRONMENTAL IMPACT OF NIGERIAN COMPOSTED WASTES USING LABORATORY EXTRACTION TEST ? IN SITU RADIOFREQUENCY FIELD LEVEL ASSESSMENT IN TWO URBAN AREAS IN ROMANIA: OPEN QUESTIONS TO ELECTROMAGNETIC POLLUTION ? INNOVATIVE SOLUTION FOR WARNING ON HI...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25657

Environmental Engineering and Management Journal, Vol. 9 Nr. 7
Environmental Engineering and Management JournalVol. 9Nr. 7
? MUNICIPAL SOLID WASTE LANDFILLING AND TREATMENT OF RESULTING LIQUID EFFLUENTS ? ROMANIA: ENTREPRENEURIAL VALUES AND SUSTAINABILITY ? THE COMPRESSIVE STRENGTH OF WOODEN BRIQUETTES USED AS RENEWABLE FUEL ? ECO-FRIENDLY EXTRACTION AND SEPARATION METHODS OF CAPSAICINES ? ADDRESSING ISSUES OF GEOENVIRONMENTAL RISKS IN DOBRUJA, ROMANIA/BULGARIA ? ADSORPTION OF 2,4-DINITROPHENOL AND 2,6-DINITROPHENOL ONTO ORGANOCLAYS AND INORGANIC-ORGANIC PILLARED CLAYS ? APPLICATION O...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25659

EFFECT OF STICKING PROBABILITIES ON NUMERICAL SIMULATION OF PARTICLE AGGREGATION IN TWO-DIMENSIONAL SPACE
Environmental Engineering and Management JournalVol. 10Nr. 6
The main phenomenon of coagulation is that particles aggregate to form floc. The formation of floc and cluster was simulated with computer in two-dimensional space using particle-cluster aggregation model and the properties of floc were analyzed using fractal theory. The effect of sticking probabilities on floc structure, density and porosity were analyzed. With the sticking probability increases, the simulated floc structure is gradually loose, floc density is gradually lower, the porosity is g...
Autori: Wanchun Tan, Yunbo Wang, Changbo Jiang, Shiquan Sun, Hong Chen, Xiaobao Niehttp://www.ecozone.ro/reviste.php?RID=25675

STRENGTH AND MICRO-STRUCTURAL CHARACTERISTICS OF SLAG-FLY ASH BASED CEMENTITIOUS MATERIALS
Environmental Engineering and Management JournalVol. 10Nr. 7
Slag-Fly Ash Based cementitious material materials with high volume of fly ash and slag and less cement clinker was prepared, with low water requirement, well fluidity and with high strength, and can be used to the preparation of High Performance Concrete (HPC). When the W/C is 0.36, the 28d compressive strength is 58.93 Mpa, 28d flexural strength is 14.26 Mpa. By XRay diffraction analysis (XRD) and Scanning Electron Microscope (SEM) analysis, the results show that main materials in grinded samp...
Autori: Chenghong Fu, Wen Ni, Hui Wu, Mingyang Tianhttp://www.ecozone.ro/reviste.php?RID=25708

STUDY ON ENERGY RESOURCES INTEGRATION AND SUSTAINABILITY OF THE NEW MODULAR AGRICULTURE PATTERN
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:The paper aims to present the new pattern of modular agriculture, as evolution of agri-food production in the coming decades aswell as to highlight the direct relation between this pattern and the massive energy support it requires.The paper basically deals with reactions to climate change, reductions of carbon emission, in addition to high quality and safetyrequirements for food production. The author envisages the PAC measures called for in order to ensure a sustainable developmentof ...
Autori: Romulus Gruia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25746

OPTIMIZATION OF PHOTO-CATALYTIC PROCESS BY TiO2 NANO POWDER IMMOBILIZED ON CONCRETE SURFACE FOR TREATMENT OF PHENOLIC WASTEWATER
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:In this paper, photo-catalytic process for treatment of phenolic wastewater by TiO2 nano powder immobilized on concrete surfacein a recirculation hydraulic flow was investigated. The process affected by different operational conditions that the optimum onescould be obtained from variables interchange. Taguchi method as a proper method for design of experiments and optimizationwas used to find optimum conditions. Selected five parameters at four levels were consists of initial phenol con...
Autori: Bita Ayati, Hossein Ganjidoust, Mohammad Delnavaz, Sohrab Sanjabi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25778

THE ASSESSMENT OF THE IMPACT ON THE ENVIRONMENT OF THE LIMESTONE QUARRIES USING SATELLITE IMAGES
Environmental Engineering and Management JournalVol. 10Nr. 10
Abstract:Surface exploitations in the limestone quarries have a major impact on the environment both by area and intensity. The valuationof the impact can be carried out through different means, one of them being the satellite remote sensing. In this article we analyzethe effects that limestone exploitations in the outskirts of BraÂ?ov city have on the landscape, using RGB combination, vegetationindices and spectrum profiles. A series of Landsat 5 TM satellite images taken in 1984, 1989 and 2009...
Autori: Iosif Vorovencii
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25784

ACTIVATED SLUDGE FLOC CHARACTERIZATION BY CONFOCAL LASER SCANNING MICROSCOPY
Environmental Engineering and Management JournalVol. 11Nr. 3
The aim of this work is the study of activated sludge floc samples stained with different dyes and imaged by Confocal Laser Scanning Microscopy (CLSM). Activated sludge flocs were stained for lipids, sugars and esterase enzyme producing bacteria. Images were acquired for different samples to analyze the structural characteristics of the bioaggregates. The analysis of the CLSM images allowed for the localization and estimation of the quantity of different build-up materials. The 3-D reconstructio...
Autori: Bela Abraham, Botond Raduly, Dan Niculae Robescu, Szabolcs Lanyi, Szabolcs Szilveszter, Szilard Bucs
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25937

ASSESSING ENVIRONMENTAL IMPACT OF PACKAGING PAPER PRODUCTION BASED ON RECYCLED FIBRE RAW MATERIAL
Environmental Engineering and Management JournalVol. 11Nr. 1
This paper is part of LCA studies performed in the frame of FP7 project �Recovered Paper Sorting by Innovative Technologies - SORT IT�. It analysis the results obtained by Life Cycle Impact Assessment (LCIA) of the reference case for recycled packaging paper manufacturing (current sorting technology), which will constitute a comparison base for new sorting technology developed in SORT IT project. The main stages considered in the life cycle were: recovered paper (RP) transport from collectio...
Autori: Alina Iosip, Antonio Dobon, Elena Bobu, Mercedes Hortal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25860

COMPARATIVE STUDIES ON THE EFFICIENCY OF ALUMINIUM COAGULANTS
Environmental Engineering and Management JournalVol. 11Nr. 2
An alternative preparation method for PAC (pre-hydrolyzed aluminium chloride with general formula Alm(OH)nCl3n-m) by electrochemical synthesis is presented in this paper. The electrochemically obtained PAC (E-PAC), in which the most effective species of the polymeric Al component were estimated by 27Al RMN method, with properties similar to the properties of a commercially available PAC solution, was successfully generated in a electrochemical reactor. For obtaining as much as Al13 polymer by el...
Autori: Adina Pacala, Ciprian Radovan, Ilie Vlaicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25901

A TECHNO-ECONOMIC ANALYSIS OF BIODIESEL PRODUCTION FROM MICROALGAE
Environmental Engineering and Management JournalVol. 12Nr. 8
AbstractThe preliminary assessment of a cost-effective flow-sheet for the production of biodiesel from microalgae lipid fraction wascarried out. The study was based on approximated cost-estimation methods integrated with the simulation software Aspen Plusź.Several scenarios were investigated to compare costs regarding the main steps of the biodiesel production process. Ranges ofinput variables from downstream literature and experimental data were used to simulate the sections that define concret...
Autori: Antonio Marzocchella, Giuseppe Olivieri, Piero Salatino, Teresa Guida
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25973

POLYMERIC WASTES FROM AUTOMOTIVES AS SECOND RAW MATERIALS FOR LARGE SCALE PRODUCTS
Environmental Engineering and Management JournalVol. 12Nr. 8
AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

EDITORIAL - A SPECIAL ISSUE DEDICATED TO ACHIEVEMENTS AND PROSPECTS IN HYDROTECHNICAL, GEODESY AND ENVIRONMENTAL ENGINEERING
Environmental Engineering and Management JournalVol. 12Nr. 4
In 2012, the Faculty of Hydrotechnics,Geodesy and Environmental Engineering of The"Gheorghe Asachi" Technical University of Iasi,Romania celebrated 50 years of education in the fieldof hydraulic engineering at the Polytechnic Instituteof Iasi.In 1948, in the same time with the EducationReform in Romania, in Galati, the Faculty ofHidrology was founded. At the same time, studentswho were attending the Rural EngineeringSpecialization in Bucharest were also transferred tothe new established Faculty....
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26048

ASSESSMENT OF THE IMPACT OF RIVERBED DESIGN ON WATER QUALITY – THE CASE STUDY OF BAHLUI RIVER, IAŞI, ROMANIA
Environmental Engineering and Management JournalVol. 12Nr. 4
AbstractIn 2010 in the area of Iasi city, Romania started the “Water-course regulation of Bahlui River, County of Iaşi” a project which inits first phase of development. It has as the main purpose to improve stream flow capacity and to guarantee the defending againstflood. Also, the project aim at developing a section of approximately 2.5 km located between the Stone Bridge (km 14+073) andTudor Vladimirescu Bridge (km 11+615) for recreational purposes. In order to obtain water storage, it i...
Autori: Catrinel-Raluca Giurma-Handley, Costel Boariu, , Tomi-Alexăndrel Hrăniciuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26050

SOIL STRUCTURE AND WATER-STABLE AGGREGATES
Environmental Engineering and Management JournalVol. 12Nr. 4
AbstractThe stability of soil aggregates is an indicator of soil structure. Soil acidity affects soil structure stability. Soil acidity has twocomponents: active acidity and exchangeable acidity. In natural conditions, each soil type has a certain level of acidity, which isgiven by its composition, natural vegetation, the chemical composition of precipitations and other factors that cause changes overtime in soil pH. Acidic soils are characterized by physical, chemical and biological properties ...
Autori: Dorin Cotiusca Zauca, , Lucian Vasile Pavel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26064

ENVIRONMENTAL IMPACT ASSESSMENT FOR TRADITIONAL VERSUS RECYCLED ROAD ASPHALT MIXTURES
Environmental Engineering and Management JournalVol. 12Nr. 3
AbstractThe evaluation of the environmental impact of transport infrastructure entails a complex characterization of factors, attitudes andconsequences. In the frame of an ecologically friendly approach, sustainable alternatives and solutions for road asphaltpavements production and exploitation must be identified. A comparative evaluation of the environmental impact for recycledand traditional road pavements asphalt mixtures, expressed as the amount of equivalent carbon dioxide, per ton of mixt...
Autori: Alina Mihaela Nicuţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26096

TECHNICAL SOLUTIONS TO IMPROVE PERFORMANCE OF THE RECYCLED CEMENT CONCRETE AGGREGATES FOR DURABLE ROAD PAVEMENTS
Environmental Engineering and Management JournalVol. 12Nr. 3
AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

SECOND GENERATION BIOFUELS AND BIOMASS
Environmental Engineering and Management JournalVol. 12Nr. 3
Mother Earth Investments AG, is actively working onthe development 2nd generation bioenergy feedstocks.In this book, Mr. Jansen generously shares hisknowledge in the field, in particular, regarding thechallenges and opportunities in development ofbiomass-derived fuels. This essential guide toinvesting in bioenergy commodities details secondgeneration biofuels from a scientific, technical andeconomic perspective, and discusses their globalenvironmental, political and financial impact.The book is ...
Autori: Roland A. Jansen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26100

COAGULATION COMBINED WITH FENTON PROCESS FOR THE TREATMENT OF WATER-BASED PRINTING INK WASTEWATER
Environmental Engineering and Management JournalVol. 12Nr. 11
AbstractWater-based printing ink has been used widely and perfectly in printing the packaging of food, drug, and wine products etc.However, due to the need of altering different colors of ink, most water-based printing ink wastewater was generated from theequipment cleaning process. Coagulation combined with Fenton process has been used for this kind of wastewater treatment inthis study, results showed that coagulation using polyaluminium chloride (PACl) as coagulant and ferrous sulfate (FeSO4) ...
Autori: Xiangjuan Ma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26214

PROCESS INTEGRATION IN THE BLEACHING SECTION OF A PAPER MILL FOR MINIMIZATION OF FRESH WATER CONSUMPTION AND WASTEWATER GENERATION
Environmental Engineering and Management JournalVol. 12Nr.12
AbstractWater system integration can minimize both fresh water consumption and wastewater discharge from the paper mills. In thepresent study, Pinch Technology was used to analyze and optimize the water network of an integrated paper mill. A system wasdeveloped and a limiting constraint (COD concentration) was identified based on investigations for water quality, and thenminimum fresh water and wastewater targets were determined without considering water losses. The analysis was extended byestim...
Autori: Sudheer Kumar Shukla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26240

ESTIMATION OF OPTIMUM FILTER CAKE IN PRODUCTION OF IMPERMEABLE LAYER USING FUZZY LOGIC
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractWorldwide, waste materials are produced as a by-product of industrial manufacturing and placed in storage areas. One of the waste materials is filter cake (FC). FC is formed during the infiltration of cooling water in steel factories. The main aim of this research is determination of optimum usage of FC in the production of impermeable layer on ground by using fuzzy model approach. Because of this, in the study, FC as a waste material was hardened with cement and an impermeable layer was...
Autori: İlker Bekir Topïżœu, Murat Karacasu, Tayfun Uygunoğlu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26288

EVALUATION OF THE ENVIRONMENTAL IMPACT OF ROAD PAVEMENTS FROM A LIFE CYCLE PERSPECTIVE
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractThe road infrastructure has a major environmental impact by covering important land surfaces and consuming enormous amounts of raw materials for construction and maintenance. The impact of transport pavements needs to be considered from the design stage and to be examined during the whole life cycle of the infrastructure: raw materials extraction and initial transformation, manufacturing, placement on site, exploitation, maintenance, and demolition. This paper evaluates the impact of asp...
Autori: Isabela Maria Simion, Laura Dumitrescu, Maria Gavrilescu, , Radu Andrei, Sebastian George Maxineasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26297

SURVEY OF DWELLING BUILDINGS FOR SEISMIC LOSS ASSESSMENT AT URBAN SCALE: THE CASE STUDY OF 18 VILLAGES IN VAL D’AGRI, ITALY
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractThis paper offers a case study of the seismic vulnerability assessment of existing buildings in 18 villages located in the Val d’Agri area (Basilicata region, Southern Italy). A building-by-building inventory was carried out within the urban areas of the villages by trained technicians in two periods collecting typological data for a total of about 17,500 buildings. In the first period (2001-2003), a purposely drawn up inspection form (VSP-2001) based on the usability form adopted in Ita...
Autori: Angelo Masi, Carmelinda Samela, Leonardo Chiauzzi, Luigi Tosco, Marco Vona
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26299

STUDY ON COUPLING EVAPORATION OF DIESEL DROPLETS
Environmental Engineering and Management JournalVol. 13Nr. 3
AbstractThe effect of the number of surrounding droplets and distance between evaporating droplets on evaporation rate of the targetdroplet is studied experimentally in an evaporator which has been validated based on the d-square law. It can be found that theevaporation rate of the target droplet decreases with the increase of the number of surrounding droplets and the decrease of thedistance between evaporating droplets. The results analyzed experimentally and theoretically show that there is a...
Autori: Li Xiang-Rong, Liu Fu-Shui, Ma Yupo, Wang Xiang-Yuan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26304

A THIRD-GENERATION OPTICAL FIBRE TRANSDUCER FOR LANDSLIDE MONITORING
Environmental Engineering and Management JournalVol. 13Nr. 4
AbstractMonitoring an unstable slope is quite important for environmental safety. Based on our previous studies, this paper presents athird-generation distributed optical fibre transducer. The operating mechanism of this novel transducer was analysed for itsresponse to a single concentrated and uniform load, and a theoretical study was conducted on the elongation of the bottomsurfacefibres of a bending resistance model at the phases of linear elasticity and total cross-section cut-off stage. A b...
Autori: Bang Liu, Dong-Yan Liu, Hu Luo, Jing-Cheng Liu, Qiao-Ying Yuan, Yun-Ju Luo, Zheng-Wei Zhu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26348

EVALUATION OF COMMUNITY ENERGY-SAVING EFFECTS USING FUZZY LOGIC MODEL
Environmental Engineering and Management JournalVol. 13Nr. 5
AbstractA township consists of diversified communities, and communities are the basic units of local infrastructure. The public buildings,public lighting equipment, private buildings, and community residents are the normal-state energy consuming aggregates. Ascommunity organizations have great influences, the promotion of community energy-saving policy under the organizationalinfluence, along with the concepts of direction, evaluation, and subsidy, can help to realize the community energy-saving...
Autori: Sung-Lin Hsueh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26374

TECHNICAL SOLUTION TO REDUCE SOIL EROSION PRODUCED BY TAZLAU RIVER IN TARATA PERIMETER, ROMANIA
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractThe paper analyses the hydrologic parameters of the Tarata perimeter with alluvial soils, in order to estimate the values of theTazlau River behaviour, in case of flooding. Tazlau River flow rate has an annual average value of 4.9 mł/s, with a torrentialcharacter when the level of precipitation is increasing. The analysis of this perimeter is of interest today as a result of the existingexcessive erosion. We identified a possible solution to reduce soil erosion through the exploitation o...
Autori: Stelian Cartacuzencu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26469

LIFE CYCLE ASSESSMENT OF WASTE MANAGEMENT AND RECYCLED PAPER SYSTEMS
Environmental Engineering and Management JournalVol. 13Nr. 8
AbstractMunicipal solid waste management is a matter experienced by the entire world, mostly encountered in urban areas as a result ofpopulation growth and increased income per capita. This issue always posed threats to environmental quality and human health,and continues to be one of the major environmental problems people continues to face. In the last few decades, the systemsanalysis techniques have been applied to manage the municipal solid waste (MSW) streams through a range of integrativem...
Autori: Cristina Ghinea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26481

ENVIRONMENTAL ASSESSMENT OF A PRECAST CONCRETE BUILDING STOCK IN A TIME PERSPECTIVE
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractThe sustainable refurbishment of the existing building stock is a key issue in achieving the ambitious long-term energy andenvironmental goals of the European Union. Europe has a vast building stock built with prefabricated reinforced concrete largepanelconstruction technology after World War II to decrease the general housing shortage, mostly in the Eastern-Europeancountries and East Germany.This study focuses on the environmental evaluation of the retrofitting of the existing precast l...
Autori: Sára Hrabovszky-Horváth
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26538

INVESTIGATION OF THE EFFECT OF MOISTURE IN THE TIME LAG OF BUILDING WALLS WITH DIFFERENT INSULATING MATERIALS
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractThe thermal and water insulation of buildings is extremely important. Currently, the most applied insulation materials in thebuilding sector are plastic foams and fibrous materials. Different types of polystyrene materials are used as water and thermalinsulators, e.g., expanded polystyrene (EPS) and extruded polystyrene (XPS). The differences between the different polystyrenematerials is found in their manufacturing processes and thus in their microstructure. Our research focuses on the ...
Autori: Ákos Lakatos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26546

APPLICATION OF RECONFIGURABLE HARDWARE TECHNOLOGY IN THE DEVELOPMENT AND IMPLEMENTATION OF BUILDING AUTOMATION SYSTEMS
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractDue to the continuously increasing trend in the costs of the traditional fossil fuels, the development of residential or commercialbuildings with reduced energy needs becomes a significant and more pressing scientific challenge. At the same time, consumersare increasingly demanding more comfortable buildings, where the energy needs are addressed using locally available renewableenergy resources. Consumers also require a higher level of security, supervision, and control of the building, ...
Autori: Géza Husi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26553

APPLICATION OF ECODESIGN METHODOLOGY IN SMEs RUN ACCORDING TO LEAN MANAGEMENT: THE CASE OF A FURNITURE PUBLISHING COMPANY
Environmental Engineering and Management JournalVol. 13Nr. 12
Abstract The aim of this paper is the adaptation of an Ecodesign methodology for product publishing SMEs that have implemented Lean Management. To obtain verification of this methodology, an eco-redesign case study of a product has been carried out from a furniture publishing SME which applies lean management to its entire production chain. Some proposed improvements resulting from this case study were: Design for dismantling, Multifunction, Dematerialisation, Increasing the material of rene...
Autori: Sara González-García
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26592

STUDIES ON THE PHOTOCATALYTIC DEGRADATION OF ORGANIC DYES USING CeO2 - ZnO MIXED OXIDES
Environmental Engineering and Management JournalVol. 14Nr. 2
Abstract A new catalytic mixture of nanosized dioxide (CeO2) and zinc oxide (ZnO) powders have been synthesized by surfactant-assisted solvo-thermal route, characterized and evaluated for photocatalytic activity. The prepared catalysts were characterized by TG, XRD, SEM and EDAX methods. SEM analysis showed that the catalyst particles have spheroidal shape and their sizes range from 50 to 80 nm, organised as uniform distributed aggregates with large surface area, leading to the existence of ...
Autori: Gabriela Antoaneta Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26655

NOVEL USES OF RED MUD IN TEXTILE WASTEWATER TREATMENT, DYEING, AND CONCRETE PRODUCTION
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract Optimum conditions for the reusability of red mud were explored testing both dried and HCl-activated red mud as a coagulant in the treatment of dyehouse wastewater. Treated dyehouse wastewater was further reused in five dyebaths with different mixture ratios of distilled water (D) and treated wastewater (W) for dyeing fabrics at three color strengths of three reactive dyes. Sludge obtained from the optimum dosage of HCl-activated red mud was tested for its reuse potential in the pro...
Autori: Aylin Yildiz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26738

PREPARATION, CHARACTERIZATION AND ADSORPTION PROPERTIES OF MFe2O4 (M = Ni, Co, Cu) NANOPOWDERS
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract MFe2O4 nanopowders (M = Ni, Co, Cu) were prepared using the precursor technique, starting from the corresponding metal nitrates and poly(vinyl alcohol)-PVA. During the heating of metal nitrates- PVA solution, a redox reaction takes place around 150°C, leading to the formation of M(II) and Fe(III) carboxylates. These compounds were used as precursors for the ferrites nanopowders. The desired ferrites were obtained by thermal decomposition of the carboxylates; the obtained...
Autori: Marcela Stoia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26745

EXPERIMENTAL INVESTIGATION ON THE HEAT OF COMBUSTION FOR SOLID PLASTIC WASTE MIXTURES
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract The aim of this paper is to determine the heat of combustion of plastic wastes resulted from municipal solid waste, automotive shredder facility waste and building and construction waste. The plastic wastes have been separated by flotation technique using as flotation media: water, ethanol, their mixtures and magnetic fluid. Resulted fractions have been analyzed aiming to determine the most effective fraction from the heat of combustion point of view. The obtained results have been ...
Autori: Liviu Costiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26750

MICROBIAL SAFETY OF PLASTIC MATERIALS OBTAINED FROM WASTES
Environmental Engineering and Management JournalVol. 14Nr. 6
Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

INVESTIGATION OF STRESS - STRAIN BEHAVIOUR OF RECYCLED AGGREGATE CONCRETE UNDER CYCLIC LOADS
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

AROMATIC HYDROCARBON LEVELS AND PM2.5 CHARACTERIZATION IN ROME URBAN AREA: PRELIMINARY RESULTS
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The preliminary results of aromatic hydrocarbon (AR) levels and PM2.5 physico-chemical characterization in Rome urban air throughout the 2014 are reported. A gas chromatograph was used for continuous measurements of AR concentrations with 30 minute time intervals. PM2.5 was collected by PM swam Dual Channel. Metal content was determined by ICP-MS. Single particle characterization was performed by Scanning Electron Microscopy equipped with a thin window system for X-ray microanalysis...
Autori: Carla Fanizza
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26780

DEVELOPMENT OF A MULTRICRITERIA INDICATOR OF VIRTUOSITY IN WASTE MANAGEMENT ADDRESSED TO LOCAL AUTHORITIES
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract As the percentage of segregated waste, taken as individual indicator, is insufficient to measure the virtuosity of a Municipality waste management, a multicriteria indicator has been developed to broaden the horizon of the analysis of waste management performance. The aim of this study is to experiment a new and easy–to-use methodology for the evaluation of Municipalities virtuosity in waste management, built from Public Administrators to verify the responsiveness between thei...
Autori: Alessandra Bonoli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26786

INTERSECTORIAL REUSE OF WASTE AND SCRAPS FOR THE PRODUCTION OF BUILDING PRODUCTS: STRATEGIES AND VALORIZATION OF WASTE
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract The European Commission has introduced a whole range of policies and initiatives to promote the product eco-innovation and the environmental impacts reductions. One of the key topic for the reduction of the environmental impacts is the waste recycling and reuse (turning waste into useful resources). A teamwork of Politecnico di Milano has developed a research work, still ongoing and continuously updated, called “The usefulness of the useless. Cross-sectorial evaluation of wast...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26788

DEALING WITH LCA MODELING FOR THE END OF LIFE OF MECHATRONIC PRODUCTS
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

PHYSICAL-MECHANICAL PROPERTIES OF NEW GREEN BUILDING MATERIALS BASED ON GLASS WASTE
Environmental Engineering and Management JournalVol. 14Nr. 7
Abstract Recently several innovative suggestions on how industrial wastes can be utilised in new products have been presented in literature, e.g. as filler or additives in concrete, incorporated in ceramic materials to produce glass-ceramics and pavement construction. In this work, metallurgical materials from secondary aluminium scrap processing and glass waste derived from treatments of packaging and fluorescent lamps were considered for fabrication of new ceramic materials using powder te...
Autori: Rosa Taurino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26794

STUDY ON THE DAWSONITE - BEARING SANDSTONES REFORMED BY CO2 FLUID
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract Based on the study on the reformation of Dawsonite-bearing sandstones with CO2 fluids at different temperature (100oC 200oC and 300oC) and different CO2/H2O/sandstone systems, it is suggested that as the temperature increases, the corrosion intensity of dawsonite-bearing sandstones is gradually increased, but the stability of the sandstone is reduced. The SEM study shows that there are radiated aggregate sediments of boehmite in all samples. At 200oC, with the dissolving of dawsonit...
Autori: Xi-Yu Qu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26814

WASTE MANAGEMENT IN CIVIL ENGINEERING: A DYNAMIC FRAMEWORK
Environmental Engineering and Management JournalVol. 14Nr. 8
Abstract The recycling and later use of construction and demolition waste (C&D waste) as construction materials present a strategic inconvenience for many stakeholders involved in the sustainable construction. In some countries, the recycling percentage of C&D waste is around 80% of the C&D generated. However, in other countries this percentage is much lower. This complexity requires a better understanding of the recycling dynamic. In the specific case of Spain, the National Inte...
Autori: Nuria Calvo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26817

A WASTE CATALYST FOR A HAZARDOUS CHLORINE – CONTAINING PLASTIC WASTE
Environmental Engineering and Management JournalVol. 14Nr. 9
Abstract The recycling of plastic waste is important both in the conservation of resources and the environmental protection. A plastic waste (PE/PP/PS/PVC) was pyrolyzed over a series of post-use FCC catalysts using a fluidizing reaction system similar to the FCC process operating isothermally at ambient pressure. Experiments carried out with these catalysts gave good yields of valuable hydrocarbons with differing selectivity in the final products dependent on reaction conditions. A model ba...
Autori: Ta-Tung Wei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26836

SUSCEPTIBILITY OF THERMOPLASTIC BASED COMPOSITES TO DEGRADATION BY MICROORGANISMS
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract In the present study, several selected formulations based on recycled (rPP) or virgin polyolefins (vPP) and lignocelluloses were prepared and subjected to microorganism attack. Biodegradation tests were performed with microbial strains belonging to fungal genera, like Aspergillus, Penicillium and Fusarium. The initiation of biodegradation was demonstrated by Scanning Electron Microscope (SEM) micrographs showing the colonization of surface samples by microbial strains. The crystalli...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26879

UNCONVENTIONAL MORTARS WITH RECYCLED CATHODE RAY TUBES WASTE GLASS
Environmental Engineering and Management JournalVol. 14Nr. 11
Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

INDUSTRIAL SOLID WASTE MANAGEMENT IN THE GOVERNORATES OF NABLUS AND RAMALLAH & AL-BIREH, PALESTINE
Environmental Engineering and Management JournalVol. 14Nr. 12
Abstract In Palestine, environmental problems associated with industrial solid waste (ISW) have increased significantly in recent years. This paper presents survey results on current industrial solid waste management (ISWM) practices in the governorates of Nablus and Ramallah & Al-Bireh, Palestine. Solid waste generated from industries was quantified, characterized and discussed in terms of generation rate, storage, reuse/recycling, transportation, and final disposal. An attempt was made...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26903

PRACTICAL PROCEDURES FOR INTENSIFYING CEMENT HYDRATION
Environmental Engineering and Management JournalVol. 15Nr. 2
Regardless the solution adopted for accelerating the cement hardening by heat treatments, the present technologies facilitate the improvement of some of the essential deficiencies of concrete especially regarding the one concerning the slow hardening rhythm. Depending on the cement type used, after 24 hours from the last cement casting, there was registered a compression strength of about 10 to 20 % of the final strength designed at the age of 28 days, value which is not enough to remove the ...
Autori: Vladimir Corobceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26952

RESEARCH ON INCREASING THE REACTION SURFACE OF SELF-REDUCING BRIQUETTES
Environmental Engineering and Management JournalVol. 15Nr. 2
Waste recycling in steel industry by turning grain-size and powdery waste into pellets is a must now more than ever for economical motivation, in order to save raw materials and also for ecological reasons, as it leads to a cut down in the quantity of dumped waste. Industrial practice offers processors various technologies of waste recycling (agglomeration, briquetting, pelleting, mechanical mixture). The optimal variant should be chosen according to waste type, its content of useful elements...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26968

ANALYSIS OF HYDRIC EROSION PRODUCED BY THE SIRET RIVER, ROMANIA DURING 1989 - 2008
Environmental Engineering and Management JournalVol. 15Nr. 3
The objective of this article is to study the evolution of soil erosion produced by the Siret River during 1989 – 2008. The hydrophysical and mechanic action of the river flow manifests by freeze, thaw, erosion, transportation, and alluvial deposit processes. The researched section was delimited in a sector of Siret River bed, where the exploitation of mineral aggregates is carried out on large areas. The influences and effects of deficient exploitation of mineral aggregates have a dire...
Autori: Stelian Cartacuzencu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26977

INVESTIGATION OF AMMONIUM ION ADSORPTION ONTO REGENERATED SPENT BLEACHING EARTH: PARAMETERS AND EQUILIBRIUM STUDY
Environmental Engineering and Management JournalVol. 15Nr. 4
The release of nitrogen compounds into the environment is a major concern worldwide. Different studies howed that recycled materials have a high removal capacity for pollutants. Bentonite and its major clay minerals, smectites clays are common bleaching agents used for oil refinery bleaching and known as bleaching earth (BE). In this study regeneration of spent bleaching earth (SBE) acquired from the vegetable oil industry was surveyed via different methods and the regenerated spent bleaching...
Autori: Mohammad Malakootian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27000

MONITORING OF RADIOACTIVITY LEVEL IN AUTOCLAVED AERATED CONCRETE PRODUCED IN ROMANIA AND RISK ASSESSMENT
Environmental Engineering and Management JournalVol. 15Nr. 4
This paper presents the results of measurements related to the activity concentrations of 226Ra, 232Th and 40K in autoclaved aerated concrete (AAC) used as building materials for various constructions in Romania. Radiation index (I) and the hazard index (HI) were estimated to assess the risk arising from the usage of AAC materials. Our study considered various AAC samples produced by different companies, in 2015. The activity concentrations of 226Ra, 232Th and 40K were measured using by a gam...
Autori: Dorina Nicolina Isopescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27018

RECOVERY OF SAWDUST AND RECYCLED RUBBER GRANULES AS SOUND ABSORBING MATERIALS
Environmental Engineering and Management JournalVol. 15Nr. 5
This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

AN ALTERNATIVE METHOD TO EVALUATE THE HEALTH STATUS FOR CONCRETE DAMS
Environmental Engineering and Management JournalVol. 15Nr. 6
Dam’s behavior monitoring is highly influenced by the existence of an appropriate instrumentation system installed in structure’s body, its foundation and in the neighboring area as well as by the periodical acquisition, collection, processing and interpretation of data. Existing monitoring systems may be enhanced with mobile labs that can perform regular or special measurements. Hybrid models appear to be an attractive option for the evaluation of the static and/or the dynamic be...
Autori: Altan Abdulamit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27065

VISUAL IMPACT ASSESSMENT OF COLOUR AND SCALE OF BUILDINGS ON THE RURAL LANDSCAPE
Environmental Engineering and Management JournalVol. 15Nr. 7
A test for quantifying the contribution of colour and scale to the visual impact of buildings in the rural setting was developed and validated by means of a public opinion survey. The method was based on some psychological aspects of visual perception and on a simple image treatment performed by a well known and easily available computer program. Results were provided as numerical values, enabling the quantification of the impact for the two individual elements studied and for their potential in...
Autori: María Jesús Montero-Parejo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27080

PROGRESSES IN ENVIRONMENTAL ENGINEERING CONCERNING THE RETENTION OF TOXIC WASTE FROM NEW PHARMACEUTICAL FORMS WITH ANTI-FUNGAL ACTION AND THE PROTECTION OF WASTEWATER QUALITY
Environmental Engineering and Management JournalVol. 15Nr. 7
Researching and industrializing a new pharmaceutical form results in an impressive amount of waste due to the methods used. Despite numerous reports about the addition of pharmaceutical ingredients to the environment, the effect they have on the environment at the nanogram (ng) level remains largely unknown; thus, it has been proposed to retain toxic compounds using Dowex resins in biomucoadhesive tablets containing miconazole nitrate, an antifungal medication. This study demonstrates the re...
Autori: Magdalena Bîrsan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27091

SOIL MICROBIAL COMMUNITIES AND THEIR POTENTIAL FOR ROOT-KNOT NEMATODES MANAGEMENT: A REVIEW
Environmental Engineering and Management JournalVol. 15Nr. 8
Biological control relying on soil microorganisms may offer feasible and sustainable perspectives in many agrosystems for management of soil pests such as root-knot nematodes (RKNs, Meloidogyne spp.). The rhizosphere environment shows a complex of soil microbial communities, including beneficial organisms such as specialized bacterial pathogens and/or of rhizosphere fungi. New advanced technologies like Next Generation Sequencing (NGS) may enlarge our knowledge about the biodiversity and rol...
Autori: Aurelio Ciancio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27109

ENVIRONMENTAL FOOTPRINT IN THE PRODUCTION OF RECYCLED WOOL
Environmental Engineering and Management JournalVol. 15Nr. 9
We computed the Product Environmental Footprint (PEF) to identify the environmental performance of recycled wool by means of data belonging to a real case study in Italy. First, we analyzed inventory data quality by computing the data quality rating (DQR) index, according to the criteria provided by the PEF protocol. Quality of specific and generic data (selected from the Ecoinvent database) was evaluated as excellent and good, respectively. We then quantified the impacts related to each rele...
Autori: Silvia Bamonti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27121

PRODUCTION OF BIOPLASTIC FROM WASTE OILS BY RECOMBINANT Escherichia coli: A PIT-STOP IN WASTE FRYING OIL TO BIO-DIESEL CONVERSION RACE
Environmental Engineering and Management JournalVol. 15Nr. 9
Waste frying oil (WFO) is a complex and heterogeneous waste collected mainly from restaurants and, to a lesser extent, from food processors and households. In the last decades, interest for this waste has deeply grown and a strong competition in grabbing this raw material has begun. About 90% of WFOs collected in Europe is recycled for biodiesel production, being the high free fatty acids (FFAs) concentration in WFOs one of the main drawback limiting the yield of the conversion process. In th...
Autori: Cinzia Pezzella
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27130

MARBLE FILLERS EFFECT ON THE MECHANICAL PERFORMANCE OF A RECYCLED AGGREGATE CONCRETE
Environmental Engineering and Management JournalVol. 16Nr. 1
The aim of the present work is to investigate the effect of marble waste fillers incorporation on the mechanical properties of Recycled Aggregate Concrete (RAC). The RAC studied mixes were 0, 5, 8 and 10% (by weight of cement) of marble fillers respectively. Direct tests of compressive and flexural strength and non-destructive testing (NDT) (rebound hammer, ultrasonic) were performed. The optimal content of 5% marble fillers showed an improvement for both used test methods (compression, flexion ...
Autori: Larbi Belagraa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27240

SUSTAINABILITY AND INTEGRATION BETWEEN MINERAL RESOURCES AND C&DW MANAGEMENT: OVERVIEW OF KEY ISSUES TOWARDS A RESOURCE-EFFICIENT EUROPE
Environmental Engineering and Management JournalVol. 16Nr. 2
Sustainability and integration are becoming keywords in many European Union policies, including ones that are directly or indirectly related to mineral resources and waste management. Moreover, life cycle thinking (LCT) is core to many of these policies. The European Commission has issued the Communications “A resource efficient Europe” and “Roadmap to a Resource Efficient Europe”, the stated goal of which is to reconsider the whole life cycle of resource use so as to mak...
Autori: Gian Andrea Blengini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27267

INFLUENCE OF SOME PROPERTIES CONCERNING WATER STABLE AGGREGATES OF SALINE SOILS
Environmental Engineering and Management JournalVol. 16Nr. 5
According to literature, aggregate stability of soils is influenced by: particle size and soil texture, soil structure, content of Ca2+ and Mg2+, mineral clay type, soil content of organic matter, soil processing degree. This paper aims to investigate the influence of some physical, microbiological and chemical properties of saline soil concerning water-stable aggregate. The hydro system stability of the aggregates appears in the specialized studies as having a positive correlation with microorg...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27300

OPTIMIZATION OF GLASS FIBERS USED AS DISPERSE REINFORCEMENT OF EPOXY POLYMER CONCRETE WITH FLY ASH
Environmental Engineering and Management JournalVol. 16Nr. 5
Construction industry uses a huge quantity of traditional and modern building materials which generally are produced to satisfy different demands, such as: resistant and safety requirements, friendly with the environment, architectural aspects etc. Researches must solve any requirements related to materials properties and offer a large diversity from which the proper solution must be considered. For improving the mechanical properties of polymer concrete, the use of fibers of different types is ...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27306

FLY ASH CEMENT CONCRETE WITH STEEL FIBERS - COMPARATIVE STUDY
Environmental Engineering and Management JournalVol. 16Nr. 5
The experimental results of studies on cement concrete with fly ash and metallic fibers are presented and are compared with a control mix. In the tested mixes five dosages of cement replacement with fly ash and two dosages of metallic fibers were considered. Mechanical characteristics such as compressive, flexural and split tensile strengths were experimentally determined. Tests results had shown that fly ash as replacement of cement generally reduced the mechanical strengths of concrete. In the...
Autori: Adrian Alexandru Șerbănoiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27307

QUANTIFICATION OF EFFECTS PRODUCED BY THE EXTRACTION OF MINERAL AGGREGATES TOWARDS WATER BODIES
Environmental Engineering and Management JournalVol. 16Nr. 4
This paper presents the research performed in view of emphasizing the effects of mineral aggregates extraction on the geomorphological and hydraulic features of Moldova body of water. The effect on the geomorphological features was assessed by overlapping the cross profiles (22 profiles) and long profiles (2 profiles) from the entire area studied. These profiles were obtained by topographical measurements on the starting date (July 2013) and on the research end date, respectively (March 2015). T...
Autori: Paula Cojocaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27335

CHEMICAL, MECHANICAL AND THERMAL PROPERTIES OF MORTAR COMPOSITES CONTAINING WASTE PET
Environmental Engineering and Management JournalVol. 16Nr. 7
The main objective of this study was to investigate the potential utilization of polyethylene terephthalate PET waste in cementitious matrix, as substituent to cement, to develop lightweight construction materials and for preventing chemical attacks or repairing various reinforced concrete structures. Composites containing different amounts of PET particles, as partial replacement to cement by weight, were characterized by destructive and non-destructive testing. So, the thermal conductivity, ul...
Autori: Ahmed Soufiane Benosman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27381

EFFECTS OF USING CONCRETE WASH WATER ON A FEW CHARACTERISTICS OF NEW CONCRETE
Environmental Engineering and Management JournalVol. 16Nr. 7
Construction industries generate a large amount of concrete wash water every day, and it causes soil, surface water and ground water pollution. Therefore, re-using concrete wash water to produce fresh concrete is one of the solutions to prevent environmental pollution and to sustain water use. In this study, we tested setting time of cement, slump, compressive and tensile strength of 24 triplicate cubic samples of concrete with and without micro silica plus additive admixture using concrete wash...
Autori: Gholamreza Asadollahfardi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27389

Environmental engineering and Management Journal No. 7
Nr. 4
• EXPERIMENTAL INVESTIGATION OF TEMPERATURE EFFECTS ON THE PARAMETERS OF PHOTOVOLTAIC PANELS    • CONCENTRATIONS OF CHROMIUM, CADMIUM AND NICKEL IN TWO CONSUMED FISH SPECIES OF PERSIAN GULF, IRAN    • IMPROVING THE ENERGY EFFICIENCY OF RESIDENTIAL BUILDINGS BY USING A DRAIN WATER HEAT RECOVERY SYSTEM    • ASSESSMENT OF METAL CONTAMINATION AND ECOLOGICAL RISK IN URBAN SOILS SITUATED NEAR A METALLURGICAL COMPLEX    • FINANCIAL DE...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27398

Environmental engineering and Management Journal No. 7
Nr. 4
EXPERIMENTAL INVESTIGATION OF TEMPERATURE EFFECTS ON THE PARAMETERS OF PHOTOVOLTAIC PANELS    • CONCENTRATIONS OF CHROMIUM, CADMIUM AND NICKEL IN TWO CONSUMED FISH SPECIES OF PERSIAN GULF, IRAN    • IMPROVING THE ENERGY EFFICIENCY OF RESIDENTIAL BUILDINGS BY USING A DRAIN WATER HEAT RECOVERY SYSTEM    • ASSESSMENT OF METAL CONTAMINATION AND ECOLOGICAL RISK IN URBAN SOILS SITUATED NEAR A METALLURGICAL COMPLEX    • FINANCIAL DEVELOPME...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27399

EVALUATION OF DIFFERENT STRATEGIES FOR END-OF-LIFE LIQUID CRYSTAL DISPLAYS (LCD) MANAGEMENT
Environmental Engineering and Management JournalVol. 16Nr. 8
End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

VALORIZATION OF AGRO-INDUSTRIAL WASTES IN LIGHTWEIGHT AGGREGATES FOR AGRONOMIC USE: PRELIMINARY STUDY
Environmental Engineering and Management JournalVol. 16Nr. 8
This research was focused on the valorization of agro industrial waste/by products available in the local industry with the kilometer zero (km 0) concept, as a replacement of virgin raw materials (clay) to elaborate lightweight aggregates (LWAS). The alternative raw materials were employed as pore forming agent, in order to reduce sintering temperature and energy consumption of the furnace. The three technical nutrients studied were provided for local food industries: sludge from wastewater trea...
Autori: Romina D. Farias
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27405

WATER FOOTPRINT APPLIED TO CONSTRUCTION SECTOR
Environmental Engineering and Management JournalVol. 16Nr. 8
Water footprint is an indicator of freshwater use that looks not only at direct water use of a consumer or producer, but also at indirect water use; it can be regarded as a comprehensive indicator of freshwater resources appropriation, next to the traditional and restricted measure of water withdrawal. It could be counted in terms of the sum of direct and indirect water costs in all processes and input-output analysis to detailed water used in all plant. In this paper, the application of the...
Autori: Agata Matarazzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27410

CO-DESIGN FOR A CIRCULAR APPROACH IN GREEN TECHNOLOGIES: ADAPTATION OF REUSED BUILDING MATERIAL AS GROWING SUBSTRATE FOR SOILLESS CULTIVATION OF LETTUCE (Lactuca sativa var. capitata)
Environmental Engineering and Management JournalVol. 16Nr. 8
Improving the awareness of the responsibility of our actions is the basis of achieving the ambitious aim of waste management and prevention established by the European Waste Framework Directive 2008/98/CE and the most recent Circular Economy Package. Circular Economy is connected both to improve manufacturing technologies and also educate people towards responsible consumption and waste reduction. Due to its educational and institutional role, universities provide a context to rethink not on...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27414

THE SMART-GREEN RECYCLING
Environmental Engineering and Management JournalVol. 16Nr. 8
This paper describes shortly some outcomes of a project aiming to apply a scientific research directly to industry, passing through a system that wants to promote an economic "Pact" in relation to the new construction and renovation projects of energy, according to its fundamental guidelines of the moment: renewable energy and energy efficiency. The key point is to produce energy from recycled materials that become functional to dwellings (from the garden shed to furnishings, etc.),...
Autori: Marco Santarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27421

STUDY ON POLYMER CONCRETES WITH WASTE OF POLYSTYRENE GRANULES
Environmental Engineering and Management JournalVol. 17Nr. 5
This paper presents the results of experimental tests on polymer concrete prepared with different wastes. Two types of polymer concrete mixes were compared. The control polymer concrete was obtained with epoxy resin, natural aggregates in two sorts (0-4 mm and 4-8 mm) and fly ash waste used as filler. To the control mix, both sorts of natural aggregate were replaced in different dosages by polystyrene granules waste. The influence of polystyrene granules as substitution of aggregate on density, ...
Autori: Andrei Burlacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27599

FLY ASH CONCRETE WITH FIBERS: COMPARISON OF TENSILE STRENGTH USING NEURAL NETWORK AND DESIGN OF EXPERIMENTS METHODS
Environmental Engineering and Management JournalVol. 17Nr. 6
Neural networks are a series of simple mathematical models, created on the architecture of human brain which gives a superior capacity of learning based on numerous connections established among neurons. The artificial neural networks have strong units of processing which are characterized by an extreme simplicity, but because of their whole interaction, the results are complex. The paper presents the comparison of two methods: mathematical regression and artificial neural network, used for pred...
Autori: Daniel Lepadatu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27608

Environmental engineering and Management Journal No. 6
Environmental Engineering and Management JournalVol. 17Nr. 6
FLUCTUATION OF RIVER NETWORK WATER ENVIRONMENTAL CARRYING CAPACITY IN A COMPLICATED RIVER-LAKE SYSTEM    • MINERALOGY AND GEOCHEMICAL DISTRIBUTION OF HEAVY METALS FOR THE FAGUL CETĂȚII TAILINGS, ROMANIA    • ACCUMULATION AND AVAILABILITY OF TRACE ELEMENTS FROM SOIL INTO ORIENTAL TOBACCO GROWN IN MACEDONIA    • OLFACTORY EFFECT ON LANDSCAPE PREFERENCE    • EFFECT OF MOLASSES ADDITION AS BIODEGRADABLE MATERIAL ON PHENOL REMO...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27628

RE-USE OF INDUSTRIAL WASTES IN CEMENT BOUND MIXTURES FOR ROAD CONSTRUCTION
Environmental Engineering and Management JournalVol. 17Nr. 2
The paper describes the main results from a study of cement bound mixtures for road foundations with the aggregate matrix consisting of industrial wastes, i.e. foundry sands (FS), electric arc furnace (EAF) steel slags and bottom ash from municipal solid waste incineration (MSWI), combined in five different proportions. The laboratory investigation involved a preliminary analysis of the chemical, leaching, physical and mechanical properties of the industrial wastes, followed by a mechanical char...
Autori: Marco Pasetoo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27645

EVALUATION OF POST-CONSUMER MIXED POLYOLEFINES AND THEIR INJECTION MOULDED BLENDS WITH VIRGIN POLYETHYLENE
Environmental Engineering and Management JournalVol. 17Nr. 2
Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

RECOVERY OF SILICON, COPPER AND ALUMINUM FROM SCRAP SILICON WAFERS BY LEACHING AND PRECIPITATION
Environmental Engineering and Management JournalVol. 17Nr. 3
The Silicon wafer plays an important role in modern electronic products. During the production of Silicon wafer, a large amount of scrap Silicon wafer is generated. The necessity for it to be recycled and recovered is of vast importance since the metal Silicon (Si) is the major by product. Besides Silicon, the wafers also contain a small quantity of Copper (Cu) and Aluminum (Al), that are considered as minor elements during the recovery process of the Silicon wafer production. Therefore, in o...
Autori: Ching-Hwa Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27660

EVALUATION OF MUNICIPAL SOLID WASTE BY MEANS OF LIFE CYCLE ASSESSMENT: CASE STUDY IN THE SOUTH-WESTERN REGION OF THE DEPARTMENT OF NORTE DE SANTANDER, COLOMBIA
Environmental Engineering and Management JournalVol. 17Nr. 3
The main objective of this research was to evaluate the environmental impact generated by municipal solid waste during its collection, transportation, treatment and processing in the south-west region of the department of Norte de Santander, Colombia, by means of Life Cycle Assessment (LCA). Three strategies for waste management were considered: the current baseline situation, wherein 100% solid waste was taken to the landfill; plus, an optimistic and a pessimistic scenario in which solid was...
Autori: Oscar Orlando Ortiz-Rodriguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27665

FACTORS AFFECTING THE PATTERN OF VEGETATION CARBON DENSITY IN A KARST REGION IN NORTHWEST GUANGXI, CHINA
Environmental Engineering and Management JournalVol. 17Nr. 7
The changing characteristics of vegetation carbon patterns in the karst region of northwest Guangxi, China and their impact factors were analyzed on the basis of vegetation inventory data from 2005 to 2010. A radial basis function network model (RBFN) was constructed using data from 1377 samples and 13 environmental factors. The results for the 5-year study period were as follows: (1) The total carbon storage of vegetation had increased with an annual growth rate of 1.84% and the carbon density ...
Autori: Mingyang Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27692

Environmental engineering and Management Journal No. 8
Vol. 1Nr. 8
• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

NATURAL RADIOACTIVITY OF SAND SAMPLES FROM TRANSYLVANIA AREA AND ASSESSMENT OF THE ENVIRONMENTAL RISKS ON CIVIL AND LIVESTOCK HOUSING
Environmental Engineering and Management JournalVol. 17Nr. 8
The present paper focuses upon the analysis of 226Ra, 232Th and 40K radionuclides, making use of high-resolution HPGe γ-spectrometry devices. By means of this technique, the radiological risk is investigated in the case of various sand samples. The natural concentrations for 226Ra, 232Th and 40K, from sand samples, ranged from (9.3-20.0 Bqkg-1), (9.1-23.7 Bqkg-1) and (203.5-403.3 Bqkg-1), respectively. The radium equivalent activity of sands under investigation was also analyzed and ranged...
Autori: Dorin Vasile Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27775

RECYCLING TEXTILE RESIDUES INTO CEMENT COMPOSITES
Environmental Engineering and Management JournalVol. 17Nr. 8
Changing wastes into raw materials is one of the most favored options for waste management, as it diverts wastes from landfill and saves resources. Fibers, either vegetable (cellulosic) or synthetic, may be added to cement pastes in order improve the properties of concrete or mortar by reinforcement. At the same time, if the source of fibers is wastes, then such processes make ways for recycling. In the work described here we studied the compatibility of residues from the nonwoven textile indust...
Autori: Hugo Monteiro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27766

HIGHLY EFFICIENT REMOVAL OF CADMIUM FROM AQUEOUS SOLUTION USING POLYMER-STABILIZED ZERO-VALENT IRON NANOPARTICLES: EQUILIBRIUM, KINETIC AND THERMODYNAMIC STUDIES
Environmental Engineering and Management JournalVol. 17Nr. 8
Bare zero-valent iron nanoparticles (bare-ZVIN) have a great tendency to aggregate, which drops their reactivity with pollutants. To address this issue, polyvinylpyrrolidone stabilized-ZVIN (PVP-ZVIN) was synthesized and used for the removal of Cd2+ from aqueous solution in a batch system. The effects of operation conditions such as the pH of aqueous solution (2-8), reaction time (0-120), adsorbent concentration (1-6 g L-1) and the initial Cd2+ concentration (10-60 mg L-1) on the removal efficie...
Autori: Amirhosein Ramazanpour Esfahani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27764

Environmental engineering and Management Journal No. 8
Vol. 1Nr. 4
• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

Environmental engineering and Management Journal No. 8
Vol. 1Nr. 4
• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

PREFABRICATED BUILDING SYSTEMS: EVALUATION OF THE CONSTRUCTION PRACTITIONERS’ PERCEPTION ON THE ENVIRONMENTAL AND ECONOMIC BENEFITS
Environmental Engineering and Management JournalVol. 17Nr. 9
This paper focus on how prefabricated building systems can allow the implementation of deconstruction strategies. Prefabricated mechanically fixed components, in comparison with conventional concrete and brick in situ construction, can be more easily separated during demolition, allowing its reuse, and even if this is not possible, at least allowing the recycling or the energetic recovery. It is very important that construction practitioners understand the benefits of the prefabrication. As a wa...
Autori: Joăo Pedro Couto
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27739

LOW-COST ORTHOPEDIC SHOES BASED ON RECYCLED MATERIALS: MANUFACTURING, PLANTAR CORRECTION EVALUATION
Environmental Engineering and Management JournalVol. 17Nr. 8
The paper describes a flexible and low cost method regarding the progress of improvement, in terms of foot diseases, in case of wearing orthopedic shoes containing progressive correction orthotic insoles. The research in the field aims at two purposes. The first one is to find an effective method for orthopedic shoe insoles manufacturing, with the role of progressively correcting plantar diseases by using cheap solutions based on the recycled materials. The research focused on an adaptive insole...
Autori: Barbu Braun
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27757

SYSTEMS FOR RAINWATER HARVESTING AND GREYWATER REUSE AT THE BUILDING SCALE: A MODELLING APPROACH
Environmental Engineering and Management JournalVol. 17Nr. 10
In the light of water shortages, frequently affecting many regions worldwide, domestic rainwater harvesting, and greywater reuse systems represent an alternative source of water. This study fits this framework providing a hydraulic/hydrological model developed by means of the EPA’s Storm Water Management Model. The model has been applied to a case study, which consists of an apartment building located in the city of Bologna and equipped with a hybrid rainwater-greywater recycling system. C...
Autori: Sara Simona Cipolla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27789

REUSE AND VALORIZATION OF SILT FROM AGGREGATES CRUSHING OF ALLUVIAL GRAVEL AND SAND, FOR THE MANUFACTURING OF CEMENT BASED BUILDING ELEMENTS
Environmental Engineering and Management JournalVol. 17Nr. 9
The development of Multi-Energy Systems (MES) or District Energy Systems (DES) requires suitable design and operation opti-mization tools, in order to assess their feasibility and economic profitability. These tools can be helpful in choosing the proper technologies and also in the perspective of defining proper incentive or taxation schemes. A critical result of the analysis of MES is that, when optimizing their design, the operation strategy and the part load behavior of the units must be cons...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27796

ECO-INNOVATION IN VALCUCINE FOR A CIRCULAR ECONOMY
Environmental Engineering and Management JournalVol. 17Nr. 10
Recently, more and more companies are implementing good environmental practices. Environmental certifications, besides being valuable management tools for companies, given the opportunity to strengthen their role on the market. An example of such virtuous behavior is the case of Valcucine, an enterprise of the Livenza furniture district in Northern Italy. Valcucine focuses its care in the production of furniture, in particular of kitchen units, characterized by sustainable production, eco-compat...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27797

EFFECT OF PARTICLES SIZE OF CRT GLASS WASTE ON PROPERTIES OF POLYMER CONCRETES
Environmental Engineering and Management JournalVol. 17Nr. 10
The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

REUSE AND VALORIZATION OF SILT FROM AGGREGATES CRUSHING OF ALLUVIAL GRAVEL AND SAND, FOR THE MANUFACTURING OF CEMENT BASED BUILDING ELEMENTS
Environmental Engineering and Management JournalVol. 17Nr. 10
The development of Multi-Energy Systems (MES) or District Energy Systems (DES) requires suitable design and operation opti-mization tools, in order to assess their feasibility and economic profitability. These tools can be helpful in choosing the proper technologies and also in the perspective of defining proper incentive or taxation schemes. A critical result of the analysis of MES is that, when optimizing their design, the operation strategy and the part load behavior of the units must be cons...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27803

GASIFICATION OF BIOMASS FROM RIVER MAINTENANCE AND CHAR APPLICATION IN BUILDING MATERIALS PRODUCTION
Nr. 10
This paper exposes the research activities regarding REBAF (Energetic Recover of River Biomasses) project, focused on the maintenance operations self-sustainability of the Secchia river (Italy). Poplar was found as the most abundant and representative wood plant of Secchia riverbanks, with a good behavior during gasification process: from 1 hectare of maintenance every three year, it was possible to produce 23 MWh of electrical power and 31 MWh of thermal power. The biochar obtained was characte...
Autori: Vittorio Vezzali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27804

INNOVATIVE USE OF SCRAP AND WASTE DERIVING FROM THE STONE AND THE CONSTRUCTION SECTOR FOR THE MANUFACTURING OF BRICKS. REVIEW OF THE INTERNATIONAL SCENARIO AND ANALYSIS OF AN ITALIAN CASE STUDY
Environmental Engineering and Management JournalVol. 17Nr. 10
The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

A FUZZY MULTI-CRITERIA DECISION MAKING APPROACH FOR EVALUATING THE HEALTH-CARE WASTE TREATMENT ALTERNATIVES
Environmental Engineering and Management JournalVol. 17Nr. 12
Hierarchical distance-based fuzzy multi-criteria group decision making (DBF–MCDM) was applied to evaluate the health-care waste (HCW) treatment alternatives for Qom hospitals. A list of aspects consisting of 6 criteria and 21 sub-criteria were evaluated based on a linguistic term set by five decision-makers. Also, four HCW treatment alternatives including “incineration”, “steam sterilization”, “chemical disinfection” and “controlled landfill”...
Autori: Ramin Nabizadeh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27865

REUSE OF THE RECYCLED NONMETALLIC FRACTION FROM WASTE PRINTED CIRCUIT BOARDS IN PAVEMENT INDUSTRY
Environmental Engineering and Management JournalVol. 17Nr. 11
The aim of this paper was to investigate the possibility of incorporation non-metal fraction (NMF) in concrete products as a substitute for aggregate on industrial scale, while other studies are mostly based on NMF incorporation in concrete only on laboratory scale. Mineral filler was supplemented with 5, 10, 15 and 20 wt.% NMF from waste printed circuit boards (WPCBs) and its influence on concrete quality was assessed based on compressive and tensile strength conducted on laboratory and indust...
Autori: Vitomir Premur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27857

CHARACTERISTICS OF SOILS IMPROVED WITH POLYETHYLENE TEREPHTHALATE WASTES
Environmental Engineering and Management JournalVol. 18Nr. 2
In this study we investigated the possibilities of using recyclable fine and coarse grain waste obtained by grinding Polyethylene Terephthalate (PET) containers, as light filling materials for different applications (clay dams, highway embankments, and backfills behind retaining structures. Various geotechnical tests were performed on clayey soil and soil-PET mixtures using recycled fine and coarse granules of Polyethylene Terephthalate bottles. The results indicated that the use of the recyc...
Autori: Osman Gunaydin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27920

ECO-FRIENDLY CONCRETE FROM WASTES
Environmental Engineering and Management JournalVol. 17Nr. 12
The paper presents the experimental results obtained on cement concrete with different types of waste and the analysis of their effects on density, compressive strength, flexural strength and splitting tensile strength. The tests results were compared with a control mix without aggregate substitution. The fly ash was used as replacement of cement and polystyrene granules, chopped plastic bottle (PET) and wood waste were used as substitution of 0-4 mm aggregate sort in different dosages from 0% t...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27978

COLORS DISTRIBUTION IN POLYMER WASTES AND COLOR PREDICTION OF RECYCLED POLYMERS
Environmental Engineering and Management JournalVol. 18Nr. 5
In this paper, several image analysis techniques have been applied aiming to obtain useful information regarding the processing of municipal solid waste polymers. An automated color extraction method has been applied in order to quantize the color distribution in the polymer wastes aiming their resource and time-efficient separation according to their color. Also, by processing different density fractions from the polymer waste the color of the final material has been predicted, as well as th...
Autori: Silvia Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27994

A MULTI-OBJECTIVE OPTIMIZATION MODEL TO SUPPORT THE MUNICIPAL SOLID WASTE MANAGEMENT
Environmental Engineering and Management JournalVol. 18Nr. 5
This study aims to define a municipal Solid Waste Management (SWM) strategy using Multi-objective Optimization Problem (MOP) and ELECTRE method. Four waste treatment technologies were considered: recycling, composting, incineration and landfilling. Firstly, a Multi-objective Linear Programing (MOLP) model was developed. The solutions obtained from this model were ranked using the ELECTRE method. It was considered as case study a hypothetical city of 1,000,000 of inhabitants, presenting the a...
Autori: Rafaella de Souza Henriques
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27998

APPLICATION OF BASIC OXYGEN FURNACE (BOFS) IN AGRICULTURE: A STUDY ON THE ECONOMIC VIABILITY AND EFFECTS ON THE SOIL
Environmental Engineering and Management JournalVol. 18Nr. 6
Slags are the main by-products from steelmaking cycle, which are currently recycled inside the steel industry as well as in other sectors with significant environmental and economic benefits. As in Italy slags application is not yet allowed in agriculture, the paper aims at evaluating the technical and economic feasibility of a slag treatment plant, to obtain a product to be sold in the fertilizer market as soil amendment. A preliminary assessment of the fate of some trace metals (Cr, V, Sb a...
Autori: Teresa Annunziata Branca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28012

GREEN RETROFITTING OF REINFORCED CONCRETE BEAMS EMPLOYING SUSTAINABLE NATURAL SISAL FIBRE COMPOSITES AS ALTERNATIVE TO ARTIFICIAL FIBRE COMPOSITES FOR ENHANCED SHEAR STRENGTH
Environmental Engineering and Management JournalVol. 18Nr. 6
Sustainability and renewability in constructional materials and also utilization of such materials for various engineering purpose is the need of the hour. Green retrofitting with the aid of green fibre reinforced polymer (FRP) materials, made up of natural bio fibres like sisal would contribute to sustainable development. Non fossil-fuel carbon precursor organic fibres, i.e. sisal FRP composites were used for retrofitting of reinforced concrete (RC) beams, designed to undergo shear failure. ...
Autori: Tara Sen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28025

WASTE TONER POWDER IN CONCRETE INDUSTRY: AN APPROACH TOWARDS CIRCULAR ECONOMY
Environmental Engineering and Management JournalVol. 18Nr. 9
Substantial quantities of toner cartridges are produced and used in photocopiers and printers every year. Spent toner cartridges are classified as hazardous waste because they contain toner powder with specific chemical composition, making a recovery of waste toner cartridges a very important issue from the aspect of waste management and environmental protection. Spent toner cartridges are mechanically processed to exploit valuable materials such as metals, plastics and magnets and to separate t...
Autori: Ivana Melnjak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28053

THE EFFECT OF MONTMORILLONITE CLAY AND FIRE RETARDANTS ON THE HEAT OF COMBUSTION OF RECYCLED ACRYLONITRILE-BUTADIENE STYRENE
Environmental Engineering and Management JournalVol. 18Nr. 11
The combustion behavior of several polymers was studied with a cone calorimeter, while the samples were based on a recycled acrylonitrile-butadiene styrene (ABS) and as additives were considered: organic montmorillonite (OMT) and a mixture of two fire retardants (FR). The samples structure and thermal properties are characterized by means of Scanning electron microscopy (SEM), X-ray Powder Diffraction(XRD) and Energy-dispersive X-ray spectroscopy (EDX) and cone calorimeter. The main objective o...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28098

PERFORMANCE OF RECYCLED ASPHALT MIXTURES FORMULATED WITH MODIFIED BITUMEN
Environmental Engineering and Management JournalVol. 18Nr. 12
The maintenance of flexible roads or roads at end of life service generates high quantities of reclaimed asphalt pavement every year. The reuse of these materials, considered for a long time as waste, allows a substantial saving in transport, energy, and maintains dwindling natural resources. Recycling of asphalt also helps to reduce inert waste storage volumes, and conserve valuable landfill space. The applicability of recycled asphalt was tested in laboratory, and asphalt mixtures containing 2...
Autori: Mehena Oualit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28117

ENHANCEMENT OF BIOGAS PRODUCTION FROM FOOD WASTES IN A HYBRID ANAEROBIC–AEROBIC BIOREACTOR BY MANURE ADDITION AND LIME-PRETREATMENT OF RECYCLED LEACHATE
Environmental Engineering and Management JournalVol. 18Nr. 12
The production of food wastes is a serious issue in developed and developing countries. The biogas production technology is one of the most sustainable methods for treating food wastes. Currently, there is a great need to implement suitable methods to enhance biodegradation and methane production. This study investigated the effect of manure addition and leachate lime-pretreatment on the biogas and methane production from spoilable municipal solid wastes using a hybrid anaerobic-aerobic bioreact...
Autori: Fatemeh Aliasgari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28123

GREY DEMATEL TECHNIQUE FOR EVALUATING PRODUCT RETURN DRIVERS: A MULTIPLE STAKEHOLDERS’ PERSPECTIVE
Environmental Engineering and Management JournalVol. 19Nr. 1
In order to reduce environmental impacts from final disposal, an interest in reverse logistics has caught the attention of both firms and academicians. However, motivational factors or drivers have to be considered to efficiently perform reverse logistics, as well as the different perspectives from stakeholders. Thus, the purpose of this study is to evaluate the interrelationship among reverse logistics drivers under the perspectives of the key stakeholders. A grey-based DEMATEL (Decision Makin...
Autori: Marina Bouzon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28133

SYNERGIC EFFECTS OF SUNFLOWER STALKS AND SODIUM SILICATE IN DEVELOPING AN ECOLOGICAL CONCRETE
Environmental Engineering and Management JournalVol. 19Nr. 1
Building industry is a very large domain in the global economy and it has a lot of consequences over the environment through many and different aspects. These consequences are various, from the more and more extended area of construction up to gas emissions released during materials manufacture and transportation, construction process, exploitation of buildings and, finally, their deconstruction. The concrete, the most used material in construction industry all over the world, must become green...
Autori: Catalina Mihaela Gradinaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28138

IMPROVED CONCRETE BLOCKS WITH DISPERSED FIBERS AS CONTRIBUTION FOR ENVIRONMENTAL PROTECTION
Environmental Engineering and Management JournalVol. 19Nr. 1
EXPOSURE TO PHARMACEUTICALS AFFECTS NUTRIENT AND METAL UPTAKE BY WHEAT, Triticum aestivum L.
Environmental Engineering and Management JournalVol. 19Nr. 4
Interest in water recycling has provided opportunities to evaluate the potential impact of pharmaceuticals and personal care products (PPCPs) on plants where recycled wastewater is used for watering and irrigation. Most researches have focused on the impact of pharmaceuticals on seed germination and plant physiology or the uptake of pharmaceuticals into plants. We sought to find out whether nutrient and metal uptake into wheat plants were affected by the presence of PPCPs (acetaminophen, caffein...
Autori: Etem Osma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28193

AN EXPERIMENTAL STUDY ON MECHANICAL AND THERMAL BEHAVIOR OF ACRYLONITRILE BUTADIENE STYRENE ENHANCED WITH FIRE RETARDANTS
Environmental Engineering and Management JournalVol. 19Nr. 5
Nine samples of recycled acrylonitrile butadiene styrene (ABS) with organic montmorillonite and fire retardants adding were combined to prepare ABS copolymer nanocomposites. A very good dispersion of clay and fire retardant was noticed in the recycled ABS (reABS) matrix. The effect of montmorillonite and fire retardants on the mechanical and thermal properties of the reABS nanocomposites was further investigated. Experimental results showed that the addition of organic montmorillonite increased ...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28203

REMOVAL OF FLAME RETARDANTS FROM THE NON-METAL FRACTION OF THE PROCESSED WASTE PRINTED CIRCUIT BOARDS USING ORGANIC SOLVENTS AND PYROLYSIS
Environmental Engineering and Management JournalVol. 19Nr. 6
Printed circuit boards are the most important component of any electrical and electronic device. The average metal content in waste printed circuit boards is ~30-35% whereas the rest of the material is a non-metal fraction (NMF). Metals in the waste printed circuit boards are recycled for their value whereas the NMF is mostly sent to landfills or incinerators for disposal. The circuit board laminates contain flame retardant chemicals that pose potential hazards to the environment and to public h...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28216

IMPACTS OF DEMOGRAPHIC FACTORS ON CARBON EMISSIONS BASED ON THE STIRPAT MODEL AND THE PLS METHOD: A CASE STUDY OF SHANGHAI
Environmental Engineering and Management JournalVol. 19Nr. 8
The heavy dependence on fossil-based energy and inefficient use of energy add to the relentless growth of carbon emissions in China, and also lead to an array of serious environmental pollution issues, such as haze and smog. This situation threatens the health of residents and the sustainable development of society. China has to face the huge pressure of carbon emissions from international and domestic societies. This study aims to investigate the demographic driving factors of carbon emission ...
Autori: Yan Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28265

DESIGN AND CHARACTERIZATION OF CONTROLLED RELEASE PK FERTILIZERS FROM AGRO-RESIDUES
Environmental Engineering and Management JournalVol. 19Nr. 10
The aim of this study is to design and characterize a new controlled release fertilizers category by using valorization of residues from agri-food, industrial and post consumers activities normally allocated into landfill disposal. The underlying strategy in materials research fully agreed with the circular economy perspective and the more recent European legislation about critical raw materials recovering. This study covers the development of lightweight aggregates, based on a local red clay (k...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28286

hydro-ecological infrastructure, landscape design, SWMM, nature-based solutions, sponge city, urban water management
Environmental Engineering and Management JournalVol. 19Nr. 10
This study analysed the recycling of debris derived from the partial and selective demolition of concrete structures of Sant’Elia Stadium in Cagliari (Sardinia, Italy). This recycling was carried out to obtain coarse recycled aggregates for the production of recycled concrete. The experimental investigations demonstrated the possibility of using these recycled concrete aggregates in structural concrete and in precast concrete element, with unchanged production processes and suitable mechan...
Autori: Luisa Pani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28307

SALINE-SODIC SOIL RECLAMATION WITH STABILIZED SEWAGE SLUDGE AND RECYCLED WASTEWATER
Environmental Engineering and Management JournalVol. 19Nr. 12
Saline-sodic soil reclamation can be enhanced with a sustainable and environmental approach by using organic waste materials. Moreover, wastewater can be used in leaching processes to protect freshwater resources in regions with water shortages. The aim of this study was to reclaim saline-sodic soil by using recycled wastewater and stabilized sewage sludge together with gypsum. The experiment was designed with three replicates using four different sewage sludge doses (0, 4, 8 and 12 kg m-2), an...
Autori: Almujtaba Hassbalrassol Muhammed Abdallh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28330

ANALYSIS OF CO2 EMISSIONS BETWEEN CONSTRUCTION SYSTEMS: LIGHT STEEL FRAME AND CONVENTIONAL MASONRY
Environmental Engineering and Management JournalVol. 19Nr. 12
Since the emission of greenhouse gases is an important environment issue, this paper presents an analysis of CO2 emissions between two different building methodologies: conventional masonry and light steel frame. To this end, a 70m² building project used in Social Brazilian Housing Programs (SBHP) built according to both methods was analyzed. In addition to that, the quantitative materials used were determined, according to the building services (infrastructure, superstructure, closing and...
Autori: Silmara Dias Feiber
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28332

Sus

Acasa · Carti editate · Reviste · Despre editura · Abonament · Contact · Cos cumparaturi · Cum platesc? · Termeni si conditii
VisaMaster CardPayU

2001 - 2026 © Copyright Editura EcoZone Iasi Toate drepturile sunt rezervate.
Gazduire skaleweb.ro

SkaleWeb