AbstractThe use of composite fuels using pitcoal and sawdust represents a high perspective. The paper deals with the experimental results focusing on the combustion efficiency of composite fuel briquettes and on the polluting emissions level. A special care is given to the determination of boiler efficiency and to the establishment of exploiting economic conditions, like the supply, cleaning etc. The research of the combustion of pitcoal-wood biomass briquettes is conducted on a 55 kW boiler.A n...
Autori: Gabriel Negreanu, Gheorghe Lăzăroiu, Ion Oprea, Ionel Pisa, Lucian Mihăescu, Radu Indries, Tudor Prisecaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25301

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

Abstract The studies of Cu (II) adsorption were conducted by testing various sawdust types. Two biomass, oak sawdust wood (Querqus robur) and white poplar sawdust wood (Populus alba), have been compared considering their efficiency for copper removal from diluted water solutions. Raw sawdust proved no efficiency in adsorption. Therefore, pre-treatment processes were developed and optimized, to enhance the sawdust affinity for heavy metals adsorption. The optimized pre-treatment conditions are...
Autori: Dora Lucaci, Anca Duta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25460

Abstract Sorption is one of the several methods that have been successfully utilized for dyes removal. A large number of materials have been used as suitable sorbents for decolourization of industrial effluents: activated carbon (the most common but expensive adsorbent), polymeric resins, various low-cost adsorbents (agricultural and industrial by-products, peat, chitin, silica, bentonite, other clays, fly ash). Our paper is a review about our researches regarding different types of industri...
Autori: Daniela Suteu, Carmen Zaharia, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25532

Abstract The use of biomaterials as biosorbents for treatment of wastewaters will provide as a potential alternate to the conventional treatment methods. The main advantages of biosorption are high selectivity , cost effectiveness and good removal performance. World wide numerous low cost bio materials have tried for biosorption of dyes. In this present investigation, the dead biomass of Penicillium sp. fungus and wood sawdust was used as biosorbents and their capacity to removed malachite gr...
Autori: Cornel Pohontu, Florin Luca, Igor Creţescu, Manea Liliana, Mariana Diaconu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25593

? ADSORPTION OF DYE FROM AQUEOUS SOLUTION USING SILVER WOOD SAWDUST CARBON ? TIME SERIES ANALYSIS OF THE HEAVY METALS LOADED WASTEWATERS RESULTED FROM CHROMIUM ELECTROPLATING PROCESS ? WATER QUALITY CHARACTERIZATION OF THE PRUT RIVER ? ETHICAL AND SUSTAINABLE EDUCATION OF ENVIRONMENTAL ENGINEERS - BETWEEN REALITY AND HOPE ? INTERACTIONS AMONG CLIMATE, VEGETATION AND SOILS IN RADUCANENI ? IASI AREA ? DISTRIBUTION OF MIXING INTENSITY OF OXYGEN-VECTOR DISPERSIONS IN AERATED...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25669

Hydrogen production via biomass steam gasification and partial oxidation is analyzed from exergy aspect. Based on cypress sawdust gasified from 800°C to 1200°C, the exergy value of H2 from steam gasification rises from 1410.80 kJ kg-1 to 7922.89 kJ kg-1, while that from partial oxidation increases from 988.30 kJ kg-1 to 3097.81 kJ kg-1. The exergy efficiency of H2 from biomass also increases for both steam gasification (6.42–36.08%) and partial oxidation (4.50–14.11%). However, the exergy ...
Autori: Yaning Zhang, Bingxi Li, Hongtao Li, Bo Zhang, Hui Liuhttp://www.ecozone.ro/reviste.php?RID=25693

Abstract:Methyl orange and methylen blue are two dyes resulted from the textile industry. They are not raising just esthetical problems, butthey are toxic and hence harmful to aquatic animals. The aim of this study is to test the capacity of three types of sawdust (oak,willow and white poplar) and mixed substrates, sawdust: fly ash (FA), to remove the methyl orange (MO) and methylen blue(MB) from wastewater. The influence of contact time, solution pH and initial concentration of dyes on the blea...
Autori: Anca Duta, Dora Lucaci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25752

Abstract:Our research was focused on developing some new procedures to reduce the biodegradable wastes by composting. The aim of thisstudy was to obtain and asses at laboratory scale the maturity of three compost samples of different proportion of vegetable waste,beech sawdust and sewage sludge by analyzing their FT-IR spectra and C/N ratio. The composting process was monitored by testsperformed weekly on the three samples in order to investigate the physical parameters (pH and electroconductivi...
Autori: Anca Sauciuc, Claudia Zaha, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25772

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

AbstractThis work presents the removal of heavy metal ions (Cu2+ and Cr3+) from aqueous solutions with the use of pine (Pinus silvestris) sawdust. The experiments were conducted in a batch mode. Kinetic and equilibrium parameters of biosorption – which are best described by pseudo-second order and Langmuir models – were determined. The maximum sorption capacity at pH 5 and a temperature of 20°C for pine sawdust amounted to 21.47 mg/g for Cu2+ ions and 39.63 mg/g for Cr3+ ions, respectively.Therm...
Autori: Anna Witek-Krowiak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26210

AbstractAdsorption of a cationic dye, methylene blue, from aqueous solutions by using sawdust (without any modification) by batchadsorbers was investigated. The surface characterization of the saw dust was carried out by Fourier transform infrared (FTIR) andscanning electron microscopy (SEM) and pHzpc of the surface was also determined. Effects of different parameters such ascontact time and initial concentration, temperature and pH on the process of removal were studied. The process of removal ...
Autori: Sushmita Banerjee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26216

AbstractGlobal warming is happening due to increasing level of carbon dioxide and other greenhouse gases into the atmosphere. In orderto reduce this rising level of CO2 emitted by human activities, carbon capture and storage technologies are being developed.The present paper investigates and compares, from a techno-economical point of view, two of the most used conceptual methods(post- and pre- combustion) for CO2 capture generated from the fossil fuel power generation sector. For post-combustio...
Autori: Anamaria Padurean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26217

AbstractA pot experiment was conducted to evaluate the growth and metal accumulation in water spinach (Ipomoea aquatica) establishedon a 30-year old active firing range soil amended with chicken manure (CM) and coconut tree sawdust (CTS) at application ratesof 0%, 1% and 3% (w/w). Both amendments increased biomass yield and reduced plant metal uptake. The bioconcentrationfactor (BCF) and transportation factor (TF) values of the metals were in the order of Zn > Cu > Pb. The ammonium acetate...
Autori: Azlan Kamari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26499

This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

The paper aims to present the sorption properties of two sorbent substrates (composts) prepared by aerobic fermentation from vegetables waste composted with beech sawdust (BR2) and beech ash (BC1) to be used for Cu2+ removal from wastewaters. The composts structures and surface properties were characterised in terms of active groups (FTIR), crystallinity (XRD), morphology (SEM), topography (AFM) and specific surface and pores analysis (BET), and the changes in properties after Cu2+ sorption were...
Autori: Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27323

Unlike other vegetables, mushroom production requires several substrate ingredients, energy to sterilize the substrate, water to humidify the fruiting house and waste management of the spent substrate and used materials. This work studied the environmental impacts and eco-efficiency of sajor-caju mushroom (Pleurotus sajor-caju (Fr.) Sing.) production in terms of climate change potential, acidification potential, water depletion potential and fossil fuel depletion potential, using life cycle asse...
Autori: Siriprapa Ueawiwatsakul
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27685

Iodine is an essential microelement required by humans and animals. Leaching of soils under intensive rains has threatened the fertility status of iodine in soils. Therefore, four discrete amendments were used for the mitigation of iodine leaching from soils. For this study, soils collected from four land uses were mixed with the amendments (gypsum, lime, fly ash, charcoal and sawdust) at the rate of 0, 2.5% and 5% (w/w) in PVC columns. Potassium iodide (KI) was applied to the soil at rate of 10...
Autori: Muhammad Mohiuddin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28071

Inorganic ceramic materials is receiving more attention in recent times due to their unique characteristics which include different pore structures, hydrophilic surfaces, high chemical, thermal and mechanical stabilities that offer avenues for application in water treatment. In the present work, cost-effective clay ceramic water filters of different designs were developed from clay (50, 60, and 70) %, sawdust (15, 20, 25, and 35) %, grog (5, 10 and 15)% ratios plus 5% bone char by volume and ...
Autori: Enyew Amare Zereffa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28196

In this study, the change of freeze-thaw test result of unconfined compressive strength of clayey soils reinforced with pine tree sawdust and marble dust was investigated. Mixtures containing 5%, 10% and 15% marble dust and 0.5%, 1% and 1.5% pine tree sawdust were compressed by standard Proctor test with optimum moisture content. After curing the mixture samples for 1, 7 and 28 days at a working room temperature of +21°C, they were subjected to the freeze-thaw test at -21°C, +21°C fo...
Autori: Necmi Yarbasi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28342