Include urmatoarele articole:� Cost sensitivity analysis by Monte Carlo simulation� Mathematical modeling of gas drying by adsorption� Methyl isobutyl ketone combustion over Pt/Al2O3 catalyst� Distribution of oxygen transfer rate in stirred bioreactors with simulated broths� Unsteady heat transfer inside an elliptic cylinder� Triphasic external-loop airlift reactors. Hydrodynamic and dispersion studies� Sustainable combined utilization of renewable forest resources and coal in Roma...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25209

AbstractTheoretical and experimental studies of gas drying processes by adsorption in fixed bed of grains are presented in this paper. Based on an extensive literature study, some of the most representative mathematical models describing gas adsorption in fixed bed and consequently gas drying processes by adsorption in fixed bed are also presented. Using a mathematical model from those mentioned describing adsorption under isotherm regime, the temperature and gas flow velocity effects over the d...
Autori: Marius Sebastian Secula, Stelian Petrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25272

AbstractThis paper analyses a new technology for minimizing the use of metalworking fluids (MWF) during the machining process. Despite the fact that near dry machining (NDM) produces almost similar cutting performance to conventional flood supply machining while using much less MWF, for being fully utilized in industry is necessary to research ecological impact of these machining techniques. To take full advantage of minimal quantity lubrication (MQL) technique and expand its applicability, an u...
Autori: Domnita Florina Fratila
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25382

AbstractThe study presents the processing possibilities for marc resulted as still residue from the distillation of fermented fruits in view to obtain a compacted solid fuel. Initial marc composition (carbon, hydrogen, nitrogen, sulphur and oxygen contents) determined by elemental analysis is evidenced, as well as technical characterisation (ash and moisture contents) and ash's qualitative composition, chemical characterisation of the liquid phase (pH, total phosphorus, acidity and conductivity)...
Autori: Daniela Simina Stefan, Anca-Ileana Penu, Mircea Stefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25391

Abstract Corrosion control, using inhibitors like, polymerisable porphyrins and multifunctional nanocomposites, is extremely useful in many environments. Phosphogypsum is a waste product resulted from the process of obtaining the phosphoric acid and it can be also used as corrosion inhibitor; in a mixture with other coating materials. Two types of modified porphyrin: Na4TFP Ac - dissolved in KOH and H2SO4 and H2TPP - dissolved in benzonitrile, were tested. The structure characterization of pho...
Autori: Ionel Balcu, Adina-Elena Segneanu, Marius Constantin Mirica, Mirela Ioana Iorga, Corina Amalia Macarie, Iuliana Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25477

Abstract The paper presents a comparative approach concerning the properties of TiO2 thin layers obtained via spray pyrolysis deposition (SPD) using hydrophilic and hydrophobic polymers as additives. The influences of composition (X-ray diffraction), morphology (Atomic Force Mycroscopy, Contact angle) and optoelectric (electrical conductivity, absorption, band gap and photocurrent) properties on the photocatalytic activity of the layers were studied. ...
Autori: Alexandru Enesca, Luminita Andronic, Anca Duta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25479

Abstract In order to improve the photo-efficiency of the electronic process as well as the response into the visible part of the spectrum, TiO2 doping with heavy metal (cadmium, cooper and nickel) have been employed. The objectives of this work are: (a) to prepare doped Me(Cd, Cu, Ni) TiO2 by doctor blade (DB) and spray pyrolysis deposition (SPD) techniques, (b) to characterize the catalysts, (c) to study and compare the activity of the Cd-TiO2, Cu-TiO2 and Ni-TiO2 catalysts on methyl orange ...
Autori: Luminita Andronic, Bianca Hristache, Alexandru Enesca, Anca Duta, Maria Visa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25480

? AN ASSESSMENT OF OPERATIONAL PARAMETERS FOR THE REMOVAL OF CHLOROPHENOLS FROM WASTEWATER ? ENVIRONMENTAL SCIENCES: A PSYCHOLOGICAL-BEHAVIORAL MODEL FOR RESEARCHERS ? ECOLOGICAL AGRICULTURE: DYNAMICS OF THE BIOLOGICAL ACTIVITIES IN SOILS CULTIVATED WITH MAIZE UNDER THE INFLUENCE OF ORGANIC FERTILIZATION ? SOLAR-ASSISTED JOULE-BRAYTON ENGINES USED TO REDUCE CARBON DIOXIDE EMISSIONS ? STUDY OF THE ENVIRONMENTAL EFFECTS OF HEATING SYSTEMS ? MIXED JET-VORTEX METHOD FOR ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25662

Abstract:Drying wood requires a significant amount of thermal energy, in order to heat-up wood and evaporate the water inside it.Therefore, solutions to minimize this consumption are a topic of maximum interest for wood-processing industries. Employingsolar power for drying wood is not a novelty, considering that this possibility was already acknowledged at the end of the 17thcentury, but since then, kiln design was significantly improved, once with the progress of knowledge regarding the mechan...
Autori: Ion Marinescu, Mihaela Câmpean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25727

Abstract:In the current work design and mathematical description of thermal performance analysis of solar dryer for agricultural andmarine products is presented. Proposed solar dryer includes two main subunits: 1) Solar PV-Thermal dehydrator (heat transferfluid is air), which is used as heat source for dryer; 2) Drying cabin with multistage trays. The pilot unit of proposed systemdeveloped in Renewable Energy Department of Physics Faculty of University of Santiago de Compostela. Investigations o...
Autori: Angeles López Agüera, Daniel Rey Rey, E. Virites Montes, Iago Rodriguez Cabo, Jasurjon S. Akhatov, Vicente Gándara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25719

Abstract:The paper presents the virtual prototype of a robotic system for spray pyrolysis deposition (SPD). To design of the mechanicaldevice model of the robotic system, the MBS environment ADAMS of MSC Software was used, while the MATLAB/Simulink ofMathworks was used for the dynamic analysis of the robotic system, according to the mechatronic concept. A control loop waschosen, composed by a multi-body mechanical model, connected to the dynamic model of each motor. The main objective is toverif...
Autori: Cătălin Alexandru, Monica Enescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25744

Abstract:The drying of biological materials plays an important role in influencing energy savings, quality of end-products and alsoenvironmental issues. Several new approaches in application of solar dryers and a great number of biological materials have beendeveloped. In the paper the background of solar drying, current solar drying arrangements, and some of the recently focusedbiological products such as grain, fruit, vegetable etc. are selected and discussed. Additionally an integrated energy...
Autori: Istvan Farkas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25745

Abstract:Films of CuxS with 430-700 nm thickness were deposited by robotic spray pyrolysis technique, at T = 300Â?C, using 90 sprayingsequences, from water:ethanol:glycerol = 7:2:1 (in volumes) solutions with a molar ratio Cu:S = 1:2.5-3.5. Relative dense,homogenous and uniform films of CuxS (x = 1.8-2), with Eg = 1.97-2.49 eV and exhibiting electric resistance behavior wereobtained. The as-deposited films were annealed in air or in sulfur atmosphere, at 300 Â?C, for one hour. Dense and uniform ...
Autori: Alexandru Enesca, Anca Duta, Ionut Popovici, Luminita Isac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25749

Abstract:The aim of this work is to obtain sintered porous membranes with graded structure for microfiltration by sedimentation andsintering of metallic powders. Our previous studies have demonstrated the possibility of obtaining sintered porous materials withgraded structure by sedimentation. In this paper, spherical nickel particles were used having a grain size in the 2-90 Âľm rangemeasured by the laser scattering particle size analyzer. The powders were sedimented into a sintering die in a s...
Autori: Gyorgy Thalmaier, Ioan Vida-Simiti, Nicolaie Jumate, Niculina Sechel, Valentin Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25775

AbstractThe aim of this study was to evaluate the effect of polyphenolic extract and deuterium depleted water (DDW) as bioregulators inmaize (Zea mays L.) plant cultivation. The aqueous extract obtained from spruce bark (two levels of concentration), pure DDWand DDW in combination with spruce extract were used. The test solutions were applied by spraying and the maize plant growthand alelopatic effect on the development were studied. The following specific plants parameters were monitored: growt...
Autori: Corneliu Tănase, Irina Volf, Valentin I. Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26012

AbstractA wet flue gas desulfurization (WFGD) system adopting electrostatically-assited twin-fluid atomization injector was presented.Spatial distributions of the droplet sizes, velocity for different voltages were measured using limewater and SO2 removalefficiency for different voltages and Ca/S ratios were tested using limewater drops. The physical and chemical improvementmechanisms were analyzed using spray characteristics and double film theory. The analysis showed that electrostatically-ass...
Autori: Zhentao Wang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26175

AbstractThe right individuation of the more convenient solution for final treatment and destination of sewage sludge deriving fromwastewater plants, normally after anaerobic digestion process, is a very interesting problem, in accounting of urgent needs foracceptable solutions. The produced sludge, primarily after thermal drying, can be sent to energetic valorization processes as, forexample, incineration, gasification and also pyrolysis. In this work we examined the thermal solutions (both dire...
Autori: Deborah Panepinto
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26435

AbstractThe paper concentrates on the risks of modern technologies (in wood processing and metal industry, spray-painting processes andcar washing technologies) in the industrial and office environments on human health. The problems discussed are the following:fine dust (PM2.5and PM1.0) penetrating deeply into the lungs; high concentration of carbon dioxide in the air of cities and officeareas that are situated close to the transport junctions. The health damages can be described as follows: all...
Autori: Ada Traumann
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26501

AbstractThis paper presents an optimization procedure to minimize the cost of drying in a solar cabinet dryer based on the results of amathematical model. The model has been developed previously for performance analysis of a solar cabinet dryer. The optimalvalues for geometry of the solar collector, mass flux of air through the collector, and initial moisture content are obtained in away that the drying cost is minimized. The results indicate that to optimize the drying cost, the best values of ...
Autori: Samaneh Sami
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26564

Abstract Based on the spray mixing field-effect analysis method, this paper has taken into consideration the variation in the distribution of oxygen concentration in the combustion process and has put forward the combined combustion field-effect analysis method. The method is applied to the matching study of a certain kind of diesel engine’s combustion chamber with air admission and fuel injection parameters and can also be used to complete the simulation analysis and evaluation of mix...
Autori: Xiang-Rong Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26634

Abstract The interest in waterborne paints amelioration increased lately due to the toxicological effect of certain ingredients on human health, the restrictive environmental legislation and the depletion and escalation in price of raw materials. Research efforts in formulating waterborne paints are directed to insure low volatile organic compounds (VOCs) emission while maintaining and even improving their properties. This paper presents a waterborne paint formulation process. The required ...
Autori: Andrei Ionut Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26639

Abstract The caraway (Carum carvi L.) samples were collected from little meadows situated in Harghita Mountain (Mădăraş Ciuc, Harghita Băi, Jigodin, Tuşnadu Nou), where a relatively small area was covered by a group of rich populations of wild cumin. The harvested plants are dried by: a) convective laboratory dryer in thick layer, b) static outdoors in sunshine, and (c) static in a warm indoor place in darkness. The hand-picked seeds were separated from debris by sie...
Autori: Csaba Dezső András
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26646

Abstract A novel sensitive and rapid analytical approach based on ultra-high performance liquid chromatography - mass spectrometry (UHPLC/MS/MS) tandem was developed for the monitoring of pentachlorophenol in water samples. Chromatographic separation was carried out on Acquity BEH C18 (100 x 2.1 mm, 1.7 μm) column under gradient mode using a mobile phase consisting of acetonitrile/ultrapure water/formic acid. Quantification of pentachlorophenol was performed on a triple-quadrupole tandem ...
Autori: Yassine Kadmi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26673

Abstract Locally sourced clay from Kuala-Kangsar town in Perak state Malaysia was used in both its raw (RKKC) and modified (MKKC) form as adsorbents for the removal of methylene blue (MB) from synthetic textile wastewater in batch adsorption process. The raw clay was modified through H2SO4 acid treatment, Al(OH)3 ion exchange, calcinations and then molded into beads before freeze drying. The BET surface areas of RKKC and MKKC were 11 and 100 m2/g, respectively; their elemental analysis and ...
Autori: Manase Auta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26717

Abstract Drying wood requires a significant amount of energy. This includes both thermal energy, necessary to heat-up wood, evaporate the water inside it and cover the insulation and vent losses, as well as electric energy consumed to force air circulation through the stacks. When wood is frozen, both energy consumptions increase; on one hand because frozen water requires a supplementary heat for transformation into liquid and then into gaseous state, and on the other hand, because of the lo...
Autori: Maria Bernadett Szmutku
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26841

Abstract This paper analyses mass and energy balances of some Integrated Municipal Solid Waste Systems (IMSWS) focusing on MSW sorting, treatment and energy recovery conversion chains suitable for the last entries into the European Union (EU). In particular the Romanian case-study has been developed as reference scenario. In this context the actions timelines for the case-study are immediate (S1A), midterm (S1B) and long term (S2). In the scenarios S1A, S1B a poor selective collection (SC) i...
Autori: Gabriela Ionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26878

Abstract The CoCrMo alloys have been widely used in artificial knee or hip joints. It is well known that these materials have a good corrosion resistance and acceptable biocompatibility properties. Zirconia as a ceramic biomaterial facilitates the osteoconductivity and tissue osteogenetic capacity in new bone formation around implant. Linear polarization and electrochemical impedance spectroscopy (EIS) were employed to characterize the electrochemical behavior of plasma sprayed yttrium oxid...
Autori: Manuela Romaş
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26896

Abstract The goal of this paper is to investigate the decomposition of aqueous solutions of Azorubin (E122), i.e., an azo dye used in food industry, in a pulsed gliding arc discharge reactor (direct treatment). Air and Argon as carrier gases with solution spray has been considered, as a first approach. The bleaching of the aqueous solution was observed immediately after direct plasma treatment and the decreasing of the dye concentration have been emphasized. Further more, the dye concentrati...
Autori: Marius Ursache
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26898

To explore the main sources and pathways of heavy metals entering fruits and the corresponding countermeasures, a field survey was conducted in Pujiang County, Zhejiang Province, China. The results showed that heavy metals in fruits came mainly from the use of foliar fertilizers, ripening agents, fungicides, pesticides, and other sprayed materials during the flowering and ripening stages. Therefore, a government program should be established to improve monitoring of agricultural products ente...
Autori: Bin Fang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26955

Zirconia (ZrO2) as a ceramic biomaterial facilitates the osteoconductivity in new bone formation around implant. Surface characterization before and after electrochemical testing was performed used scanning electron microscopy (SEM). The electrochemical properties of the yttrium oxide stabilized zirconium oxide (YSZ) coated and uncoated MgCa sample with the open circuit potential at different immersion time in Ringer’s solution were studied by electrochemical impedance spectroscopy (EI...
Autori: Bogdan Istrate
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27021

From previous studies, it was found that the most important pluviometric indicators which characterize the frequency, intensity and spatial distribution of drought in Prut River floodplain are the standardized precipitation index, Hellmann’s criterion and Topor aridity index. Standardized precipitation index values between (-1.5) and (-1.0) indicates a high frequency of the moderate-dry periods and very dry ones reached 2.3 %. Autumn shows moderate - dry traits in 13.5% of the years and...
Autori: Flaviana Corduneanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27050

In studies of biochemical methane production (BMP) researchers often collate a large number of samples at the same time for a sample archive. The samples are often frozen to avoid microbial transformation, further homogenized by grinding. We studied the influence of subfreezing/thawing and drying/milling of energy crop on BMP and anaerobic biodegradability (BD). Relative standard deviation (RSD, %) between the BMP of controls and of the subfrozen was in the range 2.1–9.0%, and of the d...
Autori: Jin Mi Triolo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27079

Experimental research focus on the emission characteristics of a diesel engine employed a new combustion system-double swirl combustion system (DSCS) is carried out. The influence of spray angle on diesel emission characteristics with DSCS is analyzed by experimental and numerical method. Main emissions such as particulate matters (PM) and nitrogen oxidants (NOx) are measured in diesel engine with DSCS and the original engine. Also, fuel consumption, combustion pressure, heat release rate are...
Autori: Liwang Su
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27087

In this paper, we propose to present real solutions for close self-monitoring of older adults, given the permanent assistance and rapid intervention needed in emergency medical situations. The recent medical devices integrate existing or in development technologies that are easy to use, affordable, accessible and sustainable solutions that address a range of needs because the ultimate goal is the ensuring of a “living actively and independently at home” environment for older adults. ...
Autori: Iuliana Chiuchisan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27200

This study presents the results obtained in tailoring thin films of alumina, deposited onto aluminium substrates by spray pyrolysis, at 250°C, using AlCl3 solutions (0.15M) in a water:ethanol (1:1) solvent mixture. As morphology controlling agents, acetylacetone and maleic acid based copolymers are added in the precursors’ solutions. The precursors’ systems are analyzed by FTIR spectroscopy and the surface morphology of alumina thin films is investigated by atomic force microscop...
Autori: Luminita Isac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27291

Absorption of gases into liquids, with chemical reaction, is an important unit operation useful in many fields, especially synthesis of new products and waste gas treatment. Gas treatment means the separation of pollutants: acid gases, organic sulphur compounds, and other contaminants which may be found in gaseous streams. The absorption into liquid is a process almost exclusively used for removal of contaminants. The removal refers to retention of the majority of acid gases present in high conc...
Autori: Maria Harja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27555

Recently, the studies about vitamin B12 increased due to the high number of people who can develop vitamin B12 deficiency, namely: vegetarians, pregnant women or with vitamin B12 malabsorption. One solution to correct the low nutritional intake of vitamin B12 can be using food supplements or pharmaceuticals, based on the vitamin B12 microencapsulation. In the present research, the vitamin B12 microencapsulation and the controlled release of fresh and 4 months’ storage samples of vitamin B1...
Autori: Ioana C. Carlan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27559

In this paper the results of the aerosol flux measurements in near water boundary layer are presented. Measurements were conducted using two micrometeorological methods in the southern Baltic Sea region. The preliminary results of comparisons of two methods are discussed. The eddy covariance (EC) method is shown as a method for the calibration of the gradient method (GM). The reason for proceeding with such calibration is to show that the GM, which is an indirect measuring method, is comparable ...
Autori: Piotr Markuszewski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27630

The analysis by numerical simulations can be applied to building materials subjected to different climatic conditions to envisage the influence of environmental factors in terms of drying time, water absorption and thermal performance of materials. Currently there is a wide variety of new building materials used for insulation, waterproofing and rehabilitation, each contributing in a specific way to constructions improvement during their service life. In time, every building is subjected to degr...
Autori: Alexandra Alisa Găină
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27863

In this paper, an improved engineering model and analysis techniques are presented of the fly ash particles coagulation with droplets in Venturi tubes of industrial scale, based on spatial variation of the collection efficiency of particles on individual droplets, accounting for spray water flow polydispersity and particle size distribution, which allows to define optimal droplets size and spray water flow rate at different modes of thermal power units operation. The model is validated with the ...
Autori: Igor Volchyn
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27836

The main objective of this research is to investigate the effects of lime and waste silica fume additive on a silt and its utilization on railway subgrades stabilization. For this purpose, lime and waste silica fume were added to the silty soil in different contents at the soil optimum moisture; then the California Bearing Ratio (CBR) tests were conducted on the soil samples to estimate the favorable mixture design. At the next step, a selected sample was chosen to be exposed to wetting–dr...
Autori: Reza Ziaie Moayed
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27972

The normal operation of spray humidification air cooler hinges on the good contact between droplets and air in the humidification chamber. The spiral pressure nozzle was chosen for the experiment on inlet air spray cooling. During the experiment, the spray cooling performance and atomization features were examined, and the cooling effects of different nozzle layouts were compared.Through the analysis of heat and mass transfer, the critical pressure of the spiral pressure nozzle was determined, a...
Autori: Xiaoqing Huang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28110

To produce drinking water, the water treatment plants generate huge quantities of sludge, this sludge is a waste and they are evacuated to the dump. The valuation of these sludge will be benific This study focuses on the development of composite alginates beads and sludge activated chemically by sulphuric acid and thermally for the removal of dyes from aqueous solutions. Two dyes were studied; a basic cationic dye (methylene blue) and an acidic anionic dye (Congo red) to compare the adsorption m...
Autori: Hasna Elmontassir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28125

The main goal of this work was to develop a cheap and easy method for the synthesis of the porous metallosilicate macrospheres. Zirconium silicate macrospheres with diameters in the range 1.5 – 1.6 mm were obtained by the spray gelling technique, using the multi templating method. Tetraethyl orthosilicate was used as silica source. The chitosan played a dual role (pore and shape generating agent), while other inexpensive and easily accessible biomaterials including yeast, sugar and gelatin...
Autori: Emil Ioan Mureșan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28148

Apart of new equipment’s development such as absorption columns with higher efficiency, for chemical industry, there is a strong need for greenhouse gases reduction in order to assure the environmental protection and, consequently, many studies regarding the purification methods of exhausted gases have been performed. There are several types of reactors used for gases purification, such as: bubbling jet reactor, combined packed and spray tower absorber, cable wet scrubber and packed column...
Autori: Elisabeta Droniuc Hultuana
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28160

The paper analyses the possibilities of recycling tannery sludge (TS) in clay brick manufacture. The physico-mechanical properties and microstructure of clay brick and cement mortars vary depending on TS content in the mix. 2.5 %–15.0  TS (by weight) was added to clay bricks fired at 1000 C temperature and maintained at maximum heat for 1 hour. The tests revealed that 2.5  TS addition had a positive effect on physical and mechanical properties of clay brick: reduce drying and mfi...
Autori: Olga Kizinievič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28209

This research presents the efficiency of an air-based solar drying system for providing comprehensive information on optimal management of the wastewater treatment plant sludge (WWTPs) by using renewable energy. The solar drying method was appropriate for utilizing facilities to remove ammonia and able to inactivate environmentally stable Escherichia coli (E. coli) microorganisms which were dropped at 2 logs CFU/gr. The thermal efficiency of the dryer was recognized under the realistic circumst...
Autori: Zeinab Amin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28324

Fish meal processing industries convert the raw fish into a various commercially edible form. The effluent generated from this industry comprises a large amount of pollutants leading to high values of biochemical oxygen demand (BOD), chemical oxygen demand (COD) and total suspended solids (TSS). Mostly traditional biological and chemical methods have been adopted to treat the effluent coming out of the fish meal industry. By using these traditional methods at the end of the process, a large amo...
Autori: Rajagopalan Varadarajan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28335