ecozone editura ecozone iasi

» Autentificare

E-mail:
Parola:
   
  Cont nou
Va rugam sa va autentificati pentru a putea comanda carti

» Cautare

  » Ultimele cautari

Rezultatele pentru blasting machine

Rezultate gasite: 39

Effects of coagulants on the DCS accumulation in process water of papermaking
Environmental Engineering and Management JournalVol. 7Nr. 3
AbstractAdvanced closing of paper machine circuits results in the accumulation of the dissolved and colloidal substances (DCS) in the process water. At a critical concentration, the DCS are destabilizing even by small variations in paper machine parameters, producing operational and product quality problems. This article presents results of lab experiments simulating the process water recycling in short circuit of paper machine, without and with addition of fixing agents. Tests were performing w...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25261

Density of ecological wooden briquettes obtained from woody biomass
Environmental Engineering and Management JournalVol. 8Nr. 4
Abstract The paper proposes itself to present some aspects about woody biomass as renewable source of energy and about one of the main product namely wooden briquettes. There will be put the accent on physical features of wooden briquettes namely its density but there has be not forgotten the ecological influences. It is also stated the conditions of experimental, type of machine that is used in laboratory experiments, type and feature of raw material and wooden briquettes. Finally some condi...
Autori: Aurel Lunguleasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25491

The impact of mechanization technologies on soil
Environmental Engineering and Management JournalVol. 8Nr. 5
AbstractThe mechanization technologies of soil works have a major impact on physical state of soil. This situation is generated by the mechanical action of working parts which are involved in soil works and by the traffic of running systems of tractors and agricultural machines.These mechanization technologies have been tested to determine which of them correspond to the highest degree of sustainable agriculture concept and ensure protection, preservation and improvement of agricul...
Autori: Cornelia Muraru-Ionel, Gerard Jitareanu, Ioan Tenu, Petru Cojocariu, Vergil Marian Muraru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25506

Innovative solutions creates environmental advantages
Environmental Engineering and Management JournalVol. 8Nr. 5
Abstract This paper is a study about the symbiosis between the environmental aspects – innovation and competitive character of an industrial organization in our modern and sophisticated world. In actually global market and in conditions of world sever recession, for any organization or economic sector, the chance for surviving and development is given by adopting an innovative culture. This work contains case studies about the necessary steps for developing an innovative organization, a deb...
Autori: Florin Negoescu, Eugen Axinte, Gheorghe Nagit, Adrian Iosub
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25517

Kernel methods and neural networks for water resources management
Environmental Engineering and Management JournalVol. 9Nr. 2
Abstract This paper offers a hybrid approach, for the effective estimation of the maximum water supply and the special water flow in the watersheds of Thasos Island. This modeling effort was carried out by employing both artificial neural networks (ANNs) and kernel algorithms. Moreover support vector machines (SVMs) were used for the optimization of the ANNs. Support vector machines were applied to determine the loss of the developed ANN and to enhance its ability to generalize. As a matter o...
Autori: Lazaros S. Iliadis, Stavros Tachos, Stefanos I. Spartalis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25615

TECHNOLOGICAL POTENTIAL OF REED AS BIOMASS FOR BRIQUETTING
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:In this paper the study on the possibilities of converting chopped reed stalk biomass into briquettes is described, in the conditions of harvesting water reed plant from Danube Delta region in winter time and based on briquetting technology used for wood waste from production. The water reed tested in the research has been harvested from Tulcea reed bed, one of the largest in Romania, chopped in a veneer drum chipper and compacted into the hydraulic briquette machine. The paper focuses ...
Autori: Aurel Lunguleasa, Camelia Coşereanu, Constantin - Radu Gheorghiu, Dumitru Lica, Gavril Budău
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25734

REUSE OF PET WASTE AS THERMOPLASTIC COMPOSITES
Environmental Engineering and Management JournalVol. 10Nr. 8
Abstract:Composite manufacturing from plastic wastes of polyethylene terephthalate (PET) type, sand-blasting represents a materialrecovery of the wastes. This process can be achieved, with the purpose of reducing the material consumption which is in deficit,production costs, and the duration of the technological processes.Thermoplastics composites obtained by a melting process at 170-200 oC, wastes incorporation and solidification in forms replacesuccessfully the thermo rigid composites obtained...
Autori: Ioan Ropotă, Marcela Muntean, Mihai Bratu, Ovidiu Dumitrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25741

CALCULATION SCHEME OF A THERMODYNAMICAL TIME DEPENDENT MODEL OF THE HEAT REGENERATION PROCESS IN A SOLAR STIRLING ENGINE
Environmental Engineering and Management JournalVol. 10Nr. 9
Abstract:The aim of this paper is to propose a set of thermal models for the regenerator by taking into account the time dependent heattransfer processes, and to combine them with the thermodynamic lumped description of the solar Stirling engine, accordingly torecent description.By using analytical and numerical methods, the optimum power of the engine is sought when various constrains (or not) areconsidered, particularly fixed heat transfer rate available at the source.A sensitivity analysis of...
Autori: Alexandru Dobrovicescu, Andreea Marin, Catalina Dobre, Georgiana Tirca-Dragomirescu, Michel Feidt, Monica Costea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25767

ASSESSING ENVIRONMENTAL IMPACT OF PACKAGING PAPER PRODUCTION BASED ON RECYCLED FIBRE RAW MATERIAL
Environmental Engineering and Management JournalVol. 11Nr. 1
This paper is part of LCA studies performed in the frame of FP7 project �Recovered Paper Sorting by Innovative Technologies - SORT IT�. It analysis the results obtained by Life Cycle Impact Assessment (LCIA) of the reference case for recycled packaging paper manufacturing (current sorting technology), which will constitute a comparison base for new sorting technology developed in SORT IT project. The main stages considered in the life cycle were: recovered paper (RP) transport from collectio...
Autori: Alina Iosip, Antonio Dobon, Elena Bobu, Mercedes Hortal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25860

METRIC AND NON-METRIC CAMERAS CALIBRATION FOR THE IMPROVEMENT OF REAL-TIME MONITORING PROCESS RESULTS
Environmental Engineering and Management JournalVol. 12Nr. 4
AbstractIn recent years non-metric digital cameras have known a great development, being used in wide applications, such as: real timemonitoring and preservation of cultural heritage, the shoreline dynamics study, the wave movement for costal protection, soilerosion, etc. Clasic photogrammetry with the use of metric cameras are still of great use in areas such as architecture andenvironmental imaging. An old problem occurs when we want to extract metric information from our environment using clo...
Autori: Ersilia Oniga, Maximilian Diac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26061

DYNAMIC MECHANICAL COMPRESSION OF ROCK MATERIAL WITH DIFFERENT WEATHERING DEGREES
Environmental Engineering and Management JournalVol. 12Nr. 9
AbstractRock dynamic mechanical characteristic is the basic information to study the damage of rock structures under dynamic loadsinduced from earthquake or blasting. A nuclear power plant site is a granite mountain of the same active tectonic period. Dynamic triaxial compression experiments need to be conducted on the drill cores of different project parts according to the design requirements. These drill cores were formed in the same active tectonic period, but as a result of the different bur...
Autori: Liu Bo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26163

MODELING OF PERMEABLE PAVEMENTS FOR TREATMENT OF URBAN RUNOFF USING SELF-ORGANIZING MAPS
Environmental Engineering and Management JournalVol. 12Nr.12
AbstractKohonen Self-organizing map (KSOM) modeling have been applied increasingly for analysis, estimation and prediction ofseveral water quality processes, which are embedded with high complexity, dynamism and non-linearity. KSOM or unsupervisedneural networks were applied to microbial data (Escherichia coli, faecal streptococci, and total coliforms) from the effluent of atwo year data set (2008-2010) on two permeable (pervious) pavement systems used to treat storm water runoff contaminated wi...
Autori: Kiran Tota-Maharaj
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26226

PREDICTION OF RATE CONSTANTS FOR NITRATE RADICAL REACTIONS USING A SVM MODEL BASED ON DENSITY FUNCTIONAL THEORY
Environmental Engineering and Management JournalVol. 13Nr. 2
AbstractIn the present paper, support vector machines (SVMs) are used to develop a quantitative structure-activity relationships (QSAR) model for the reaction rate constants (-logkNO3) of 115 heterogeneous organic compounds, through reaction with nitrate radicals (NO3•) in the troposphere. Two quantum chemical descriptors used as the inputs for the SVM model were calculated with density functional theory (DFT), at the B3LYP level of theory with 6-31G(d) basis set. The best predictions were obtai...
Autori: Bing Yi, Jiyong Deng, Xinliang Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26284

MODELING AND SIMULATION OF VIRTUAL ENVIRONMENT SYSTEM OF COMPLEX COALMINE USING MULTI-AGENT TECHNOLOGY
Environmental Engineering and Management JournalVol. 13Nr. 5
AbstractInvestigating and exploring new methods of coal-mining environment has become a new project to resolve the safety of mineproduction. The virtual reality technology provides new ways and ideas for the safety of mine production, and the intelligence ofthe virtual environment is enhanced as the multi-agent is applied. Based on multi-agent technology and the investigation of themodeling approach of the virtual environment of the complex coal mine, a three-layer architecture model and the for...
Autori: Chaoli Tang, Chunling Wang, Liguo Qu, Liuyi Ling
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26364

AIRBORN SOILS POLLUTION RISK ASESSMENT NEAR OPEN - CAST IRON ORE MINES
Environmental Engineering and Management JournalVol. 13Nr. 6
AbstractAccording to the study results, the level of soil pollution with heavy metals in the northern part of Kryvyy Rih iron ore basin(Kryvyy Rih district, Ukraine) reach to “moderately threating”. In the southern part of Kryvyy Rih basin (Shyroke district,Ukraine) the level of soil pollution was between two assessments: “moderately threating” and “permissible”. The results of thestudy on buffer capacity of usual black soils show that the tested elements can be arranged in the following descend...
Autori: Mykola Kharytonov
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26389

BEST MANAGEMENT PRACTICES APPLIED TO PREVENT AND REDUCE CONCENTRATIONS OF DUST AND GASES RELEASED FROM POWER PLANTS
Environmental Engineering and Management JournalVol. 13Nr. 6
AbstractEmployers notified about working places under special conditions are required to develop Preventive and Protective RevisedPlan, in order to ensure the improvement of workers safety and health protection, including specific measures and actions, so thatthose working places comply with the norms and operate under normal conditions by the late 31 December 2013.This paper considers some outcomes of the Nucleu Program PN 07450226 funded by Romanian National Authority for Research(ANCS) and de...
Autori: Marius Kovacs
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26404

ENSURING SECURITY AND ENVIRONMENTAL SAFETY AT BLASTING WORKPLACES
Environmental Engineering and Management JournalVol. 13Nr. 6
AbstractUsing the blasting machines in explosive atmosphere involves the fulfillment of certain basic safety requirementst in Europe.Testing blasting machines to assess compliance with specific requirements is particularly important given the existing risk ofexplosion that has to be minimized so as to ensure safety of life, health and environment and to prevent damage to property andthe environment. This paper addresses the analysis of the essential health and safety requirements for blasting ma...
Autori: Leonard Lupu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26416

EFFECTS OF REUSING ABRASIVE MATERIAL IN ABRASIVE WATER JET CUTTING ON THE QUALITY OF PROCESSED SURFACES AND ENVIRONMENT
Environmental Engineering and Management JournalVol. 13Nr. 7
AbstractThe aim of the current study is to analyse the effects of reusing the abrasive material, in different rates, on the quality of surfacesprocessed by abrasive water jet cutting (AWJ) and to correlate it with the environmental impact. In view of this, two aluminiumalloys are processed, Al 2024 T3 and Al 6065 T651, respectively, with large applicability in the aeronautic and machine buildingindustries. It was found that for reusing rates of the abrasive material higher than 60%, a better qua...
Autori: Carol Schnakovszky
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26438

THE CARBON FOOTPRINT OF A BIOGAS POWER PLANT
Environmental Engineering and Management JournalVol. 13Nr. 11
AbstractIn our study, we examined the annual carbon footprint and energy balance of a Hungarian biogas power plant with a poweroutput of 0.637 MW in 2013, with reference to the complete life cycle of the biogas production. The life cycle analysis (LCA)considered the emissions of greenhouse gases (GHG) during the production of feedstock and its transportation into the powerplant, during the operation of the factory and during the process of rendering the discarded waste materials harmless. Weesta...
Autori: György Szabó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26548

THE EFFECTS OF TREE SPECIES ON REDUCTION OF THE RATE OF NOISE POLLUTION AT THE EDGE OF HYRCANIAN FOREST ROADS
Environmental Engineering and Management JournalVol. 14Nr. 5
Abstract Plants have an effective role in reducing noise pollution. The aim of this study was to evaluate the impact of broad-leaved and coniferous species on reducing noise pollution according to the distance from the sound source and the tree species type. For this purpose, 25 plots for coniferous species and 25 plots for the broadleaved species was selected. The decibel-meter (Casella Enhances CEL-630) and the trumpet (FIAMM) of machine were used to measure the sound level. Results indica...
Autori: Mehran Nasiri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26723

LAYERED MACHINE LEARNING FOR SHORT-TERM WATER DEMAND FORECASTING
Environmental Engineering and Management JournalVol. 14Nr. 9
Abstract Water Distribution Networks (WDN) are large-scale systems whose management is a complex task, with increasing environmental and socio-economic implications worldwide, and with a renewed considerable attention by all stakeholders: local authorities, regulators, environmental groups and the scientific community. WDM managers need to reliably estimate the water demand in the short-term (typically 1 day ahead), in order to operate their reservoirs and treatment plants appropriately to ...
Autori: Antonio Candelieri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26830

DATA SCIENCE AND ENVIRONMENTAL MANAGEMENT IN SMART CITIES
Environmental Engineering and Management JournalVol. 14Nr. 9
Abstract Urban environments present unique opportunities for developing new system architectures and applications aligned with the “Internet of things” paradigm. The data sources are still largely provided by physical sensors and technical devices, albeit a significant role is already played (e.g. in environmental monitoring networks) by virtual or soft sensors provided by simulation models, while a growing role is being played by human data generated thru participatory platforms...
Autori: Francesco Archetti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26833

URBAN FOREST CANOPY EXTRACTION USING LIDAR DATA
Environmental Engineering and Management JournalVol. 14Nr. 10
Abstract Urban Tree Canopy (UTC) is an important asset in the urban ecological system by reducing the heat, runoff and improving air quality. Estimating the available urban tree canopy is important for decision makers for better understanding of urban ecosystems and helps to improve environmental quality and human health in urban areas and plan conservation activities. This paper reports on an object-oriented tree extraction method developed by using spectral and textural information of High...
Autori: Muneeswaran Mariappan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26858

COMPARATIVE LIFE CYCLE ASSESSMENT STUDY OF THREE WINTER WHEAT PRODUCTION SYSTEMS IN THE EUROPEAN UNION
Environmental Engineering and Management JournalVol. 15Nr. 8
Three different winter wheat production systems for three European countries (United Kingdom, France and Italy), all with different climatic conditions, soil management and input levels (e.g. tillage, fertilizers, herbicides and pesticides) were analysed from an environmental perspective. The intended applications were the analysis and comparison from a Life Cycle Assessment (LCA) perspective and the identification of the key parameters which have the greatest influence on final results. The ...
Autori: Daniele Cambria
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27102

INNOVATIVE METHOD FOR THE EVALUATION OF PROFESSIONAL RISK DURING CONTROLLED DEMOLITION WITH EXPLOSIVES OF CIVIL USE
Environmental Engineering and Management JournalVol. 15Nr. 9
This paper presents an analytical approach to the evaluation concept of professional risk specific to activities of controlled demolition with civil use explosives of industrial/civil objectives, ensuring the appropriate level of safety to the effects generated by performing blasting to these types of constructions. The scientific research highlighted in this article was performed within the Project PN 7:45 1:28 in the frame of The National Programme for Research and Development CORE/2014. Th...
Autori: Gabriel Dragoş Vasilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27141

BEHAVIOUR OF Miscanthus AT CUTTING SHEAR WITH STRAIGHT KNIVES WITH DIFFERENT EDGE ANGLES
Environmental Engineering and Management JournalVol. 16Nr. 5
This paper presents some experimental results regarding mechanical behaviour at shear cutting Miscanthus x giganteus stem with an oblique blade of different edge angles. Experimental determinations were performed using samples of about 30 mm in length and a medium diameter of about 6.3 mm to 8.9 mm. The biomass was cut with three bevel cutting blades of 30 degrees, with a tool angle of 10, 30 and 50 degrees, fitted on an equipment used for mechanical experiments type Hounsfield, with a working s...
Autori: Georgiana Moiceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27317

CONTRIBUTION OF RETURNED PRODUCTS HANDLING SCENARIOS TO LIFE CYCLE IMPACTS – RESEARCH CASE OF WASHING MACHINE
Environmental Engineering and Management JournalVol. 16Nr. 4
The paper is addressing the issue of returns in products life cycle, focusing on a washing machine as an example of a long-life product with a complex life cycle and numerous options concerning its handling as a return. The objective of the paper is to compare different return product handling scenarios in terms of their economic and environmental aspects. The used materials and methods are the survey results of Polish manufacturing companies, an environmental life cycle assessment and simple co...
Autori: Tomasz Nitkiewicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27338

DETERMINATION OF THE DELAY ACCURACY OF THE COMPONENTS OF NON-ELECTRIC INITIATION SYSTEMS
Environmental Engineering and Management JournalVol. 16Nr. 6
In quarries, hard rock blasting is done effectively using explosives for civil use. Perhaps, the most used technical solution for decreasing the seismic effects due to blasting is sequential blasting in front of the quarry. This technical solution involves the use of proper means of initiating explosives, which have to meet certain characteristics able of leading to the achievement of the intended purpose. This paper describes one of the methods of verification and the testing results for non-el...
Autori: Edward Gheorghiosu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27354

IMPROVEMENT OF SECURITY MEASURES DURING THE USE OF EXPLOSIVES IN FIREDAMP HAZARDOUS MINES
Environmental Engineering and Management JournalVol. 16Nr. 6
This paper displays the results of the studies obtained according to the tests performed within INSEMEX explosives testing facilities, which concerns the establishing, on scientific grounds, of a procedure system of assessing the safety parameters for explosive charges used in fire-damp hazard mines, with a view to observe labour safety and health requirements while resorting to the safe and efficient rock blasting with explosives. As important results, it should be underlined the fact that the...
Autori: Attila Kovacs
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27356

CIRCULAR ECONOMY STRATEGIES FOR ELECTRIC AND ELECTRONIC EQUIPMENT: A FUZZY COGNITIVE MAP
Environmental Engineering and Management JournalVol. 16Nr. 8
A worldwide trend is leading the international community to explore the possible paths for the transition from a linear to a circular economic model. Recent studies identified the main enabling factors to facilitate this transition, among which closed loop logistics models and new service-based and function-oriented business models play a significant role. The diffusion of new business models relating to the use of a product rather than its ownership can indeed reduce material consumption and th...
Autori: Maria Grazia Gnoni
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27418

USING PCA COMBINED SVM IN THE CLASSIFICATION OF EUTROPHICATION IN DEZ RESERVOIR (IRAN)
Environmental Engineering and Management JournalVol. 16Nr. 9
Eutrophication is water pollution initiated by high amounts of plant nutrients. With the excess influx of nutrients from human activities, the eutrophication process begins and causes a breeding ground for algae. The amount of nutrients present in any given cycle will be higher than the levels present in previous cycles. Therefore, it is very important to manage water quality in lakes and dams to prevent and to slow or to reverse the eutrophication process. This can be ensured by using effect...
Autori: Saeed Bashiri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27442

MATHEMATICAL MODEL FOR PARTICLE MOTION APPLIED ON A MANURE SPREADING APPARATUS USED IN ENVIRONMENTALLY FRIENDLY TECHNOLOGY
Environmental Engineering and Management JournalVol. 17Nr. 1
It is acknowledged that organic fertilizers and wastes, such as animal slurries/manure from intensive farm enterprise, sewage sludge, poultry litter are and will continue to be spread on agricultural land and provide beneficial nutrients to crops. However, many of these materials which are also potentially polluting if not properly managed can pose a risk to groundwater and surface water quality. Generally, their distribution on the soil is performed with specialized machines to reduce the risk...
Autori: Vasilica Ştefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27545

TOXIC COMPOUNDS GENERATED BY METALWORKING FLUIDS AND ALUMINUM SLAG LANDFILL AND THEIR EFFECTS ON ENVIRONMENT AND PEOPLE
Environmental Engineering and Management JournalVol. 17Nr. 3
This paper presents an assessment of the toxic compounds released from metalworking fluids (MWFs) used in aluminum solid waste processing and from aluminum slag landfills, and their impact on environmental quality and human health. The mean concentrations of dust, oil mist, aldehydes, volatile organic compounds (VOCs) released from metalworking fluids were determined in machine shops. The exposure in machine shops was quantitatively dominated by VOCs, whose concentrations varied in the range...
Autori: http://www.ecozone.ro/reviste.php?RID=27677

RECYCLING TEXTILE RESIDUES INTO CEMENT COMPOSITES
Environmental Engineering and Management JournalVol. 17Nr. 8
Changing wastes into raw materials is one of the most favored options for waste management, as it diverts wastes from landfill and saves resources. Fibers, either vegetable (cellulosic) or synthetic, may be added to cement pastes in order improve the properties of concrete or mortar by reinforcement. At the same time, if the source of fibers is wastes, then such processes make ways for recycling. In the work described here we studied the compatibility of residues from the nonwoven textile indust...
Autori: Hugo Monteiro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27766

SPENT COFFEE GROUNDS FROM COFFEE VENDING MACHINES AS FEEDSTOCK FOR BIOGAS PRODUCTION
Environmental Engineering and Management JournalVol. 17Nr. 10
Large amounts of spent coffee grounds (SCG) are currently available all over the world due to the enormous increase in coffee consumption. This increase has in turn to be related to the even greater diffusion of coffee vending machines. The aim of this study was to evaluate the biomethanation potential (BMP) of SCG alone or in co-digestion with pig slurry (PS). Pig slurry was chosen because it is frequently utilized as feedstock for biogas production from agricultural waste. The raw material was...
Autori: Ciro Vasmara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27794

LABORATORY INVESTIGATION ON THE PURIFICATION OF FOOD WASTEWATER BY FREEZE CONCENTRATION
Environmental Engineering and Management JournalVol. 17Nr. 11
This study was carried out to determine the feasibility of applying a freeze concentration technique to rarefy milking wastewater using either a stationary wastewater vessel (the first series of tests) or a rotary ice–making machine (the second series of tests). In this study, we investigated the impact of freezing temperature, initial milking wastewater concentration and vessel depth upon the removal rate of chemical oxygen demand (COD). Results show that when the freezing temperature ...
Autori: Yingjie Dai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27845

ASSESSMENT OF THE GROUND VIBRATION GENERATED BY BLASTING IN QUARRIES
Environmental Engineering and Management JournalVol. 18Nr. 4
In order to have a proper image of the seismic effect generated by blasting works performed in quarries, the assessment methods applied before starting the blasting activity using explosives for civil use have to take into account as many information as possible with regard to blasting conditions, type of explosive, blasting technique, characteristics of the environment in which the explosive is detonated and in which the seismic waves are generated. Given the complex mode of propagation of s...
Autori: Edward Gheorghiosu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27953

MODELLING THE SOURCE TERM FOR POLLUTANTS GENERATED FROM GALVANIC CELLS
Environmental Engineering and Management JournalVol. 18Nr. 4
Being able to estimate the quantity of pollutants that can be spread in the environment is a factor of paramount importance in the industrial panorama. In order to accomplish such aim, a crucial step is the estimation of the so-called source term, that is the rate of generation (or release) of a substance in a generic process. A proper estimation requires to consider both the machinery and the unit operations present into the analysed system. For such reasons, ad hoc considerations and models...
Autori: Marco Barozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27964

APPLICATION OF SENTINEL-2A DATA AND PIXEL-BASED ALGORITHMS FOR LAND COVER MAPPING IN ILAM-IRAN
Environmental Engineering and Management JournalVol. 19Nr. 4
The western forests and rangelands of Iran in Zagros Mountain are valuable ecosystems for protecting the water and soil resources and providing the habitat for endemic fauna and flora. These ecosystems have widely destroyed by human interferences in the recent years. The land cover mapping using an accurate method is the first step to prevent the further destruction of these ecosystems. The aim of this study was to generate a land cover map of Ilam (Western Iran) using Sentinel-2A data at 10 m s...
Autori: Saeedeh Eskandari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28192

Sus

Acasa · Carti editate · Reviste · Despre editura · Abonament · Contact · Cos cumparaturi · Cum platesc? · Termeni si conditii
VisaMaster CardPayU

2001 - 2025 © Copyright Editura EcoZone Iasi Toate drepturile sunt rezervate.
Gazduire skaleweb.ro

SkaleWeb