Abstract Hydrogen could be considered a synthetic secondary power carrier fuel in the years to come, subsequent to the fossil fuels economy. Thus the concept 'hydrogen economy' shall be defined, and it will also have a great influence in the future years.The field of power generation (producing electric power), transports, (electric cars), chemistry (hydrogen is a major raw material) are potential users of hydrogen.The experts support, by means of a series of economical and strategic analysis ma...
Autori: Corina Rădulescu, Elisabeta Păsculete, Florentina Condrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25111

In recent years the removal of toxic substances especially heavy metals from water and wastewater by using of non-conventional low-cost sorbent (industrial wastes and some natural material including microorganisms, plant-derived materials, agricultural products and by-products, mineral oxides, clays) has received much attention. In this paper efficiency of Zn (II) removal from aqueous solutions by sorption onto Romanian sphagnum peat moss was studied in batch experiments involving process parame...
Autori: Angelica Kicsi, , Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25126

AbstractThe textile industry is a large water consumer. Stringent regulations of wastewater characteristics require the use of membrane processes for the removal of persistent organic pollutants (POPs) from textile wastewater prior to discharge or recycling of these effluents.This paper presents an overview of research related to the removal of persistent organic pollutants from textile industry by membrane processes, discussing also the correlations with actual pre-treatment and removal rates. ...
Autori: , Corina - Petronela Musteret
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25127

The paper presents some investigations and assessments on the impact induced in the environment by a milk processing unit which makes a variety of products. The balance sheets for raw materials were elaborated for all the activities carried on the location; based on these, the synthetic indexes of the impact on the environment were drawn, as well as the specific factors: the extent of the usage of raw material, materials and specific effluents....
Autori: Adriana Ilisoi, , Letitia Cezar, Mihai Nicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25131

AbstractThe corrosion behaviour of three commercial nickel-chromium based dental materials was investigated by electrochemical methods in a corroding mixture of sodium chloride, oxalic acid and lactic acid. In order to establish electrochemical parameters of the corrosion process, linear and cyclic polarization curves were plotted. The samples performances in the corroding system were investigated by weight loss, pH and electrical conductivity measurements. The quantitative analysis related with...
Autori: , Daniel Mareci, Daniel Sutiman, Mircea Teodor Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25132

AbstractThe paper describes the synthesis and characterization of layered double hydroxides (LDH) intercalated with 4,6-dinitro-o-cresol(DNOC) and 2,6-dichlorobenzonitrile (2,6DBN) by anionic exchange method. The incorporation of the organic pesticides in the structure of layered double hydroxides can offer premises to increase the pesticide active life by reducing its volatilization, controlling the release of the pesticide from the layered structure and decreasing the pesticide adsorption in s...
Autori: Gabriela Lisa, Marcel Ionel Popa, Mihaela Frunza
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25144

AbstractCatalysts having mobile electrons in bulk such as metals and semiconductors are good solid materials for red/ox type of reaction (oxidation) and can be effectively used in gas sensing devices as well. The aims of this work were: (i) to investigate the surface behavior of Pt(0.28%)/Al2O3 and SnO2(2.94%)-Pt(0.28%)/Al2O3 samples in inert atmosphere (He) and in reducing atmosphere containing helium-cyclopropane gas mixture under ambient condition (i.e., room temperature, atmospheric pressure...
Autori: , Cornel Munteanu, Jozsef Kovacs, Mariana Scurtu, Monica Caldararu, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25146

AbstractThe paper analyzes some aspects of waste management in Romania and, in particular, in Iasi County, in view of the European perspective. Urban and rural waste management is considered and collection, transport, processing, recycling or disposal of waste materials is discussed relative to the National Waste Management Strategy and the National Plan for Waste Management, as well as European and national legislative framework.It was showed that land disposal will continue to be a disposal op...
Autori: Ana-Maria Schiopu, Ion Apostol, Maria Gavrilescu, Monica Hodoreanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25203

Contain all the articles from this issueLignin in crop cultivations and bioremediationAlfred Abaecherli, Valentin I. PopaMaterials for intermediate-temperature solid oxide fuel cells and for proton exchange membrane fuel cellsAnnemarie Huijser, Joop SchoonmanAre interfacial biocatalysts important tools for nonpolluting technologies? 2. Immobilization of lipases and their  representative applications Brindusa Dragoi, Emil DumitriuUASB treatment of fruit canning wastewater: pilot-scale invest...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25180

Include urmatoarele articole:� Removal of persistent organic pollutants from textile wastewater by membrane processes� Sustainability evaluation of an urban residential settlement� Removal of zinc (II) from aqueous solutions by romanian sphagnum peat moss� Development trends of cold plasma reactors in the global context of carbon emission reduction� Assessing the potential of wind power in Romania within Kyoto targets� Research on the impact induced in the environment by milk process...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25198

? Kinetics considerations concerning the oxidative degradation by photo-fenton process of some antibiotics ? Catalytic wet hydrogen peroxide oxidation of 4-chlorophenol over iron-exchanged clays ? Researches on the negative effects assessment (slugging, clogging, ash deposits) developed at the biomass-coal co-firing ? Contribution to the study of the environmental heritage of a former chemical plant ? Impact of chemicals on derivatives with important therapeutic activity in C...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25376

AbstractDespite its well known toxic effects, lead continues to be a part of modern life. Lead concentrations in the environment have increased steadily throughout history, with a huge increase when lead became a common additive to paint and gasoline. Although the use of lead in gasoline and most paint has been banned in many countries, there are still many ways for lead to be released on the environment. The effects of lead on human health have been the subject of significant international exam...
Autori: Alina Murariu, Aurelia Meghea, Ioana Lacatusu, Mihaela Mihai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25244

AbstractA comprehensive characterization of fly ash from Iasi, Romania has been carried out in order to set up the utilization potential of fly ash resulting in appreciable amounts from thermal power plants as a waste, which leads to soil and groundwater contamination, as well as atmospheric pollution. This fly ash can be classified on the base chemical and technological properties in F class. Having in mind the assignment of the processing conditions, the fly ash can be used as sorbent for poll...
Autori: , Maria Harja, Marinela Bărbuţă, Nicolae Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25259

AbstractMesoporous Ti-SBA-15 materials have been synthesized up to a Si/Ti ratio of 20 using a two-step pH adjusting method. Low angle X-ray diffraction and diffuse reflectance UV-Vis spectroscopy revealed that the optimal pH value to synthesize highly ordered mesoporous solids having Ti atoms primarily in tetrahedral coordination environments is around 7.5. The nitrogen physisorption and TEM indicated also ordered mesostructures having relatively large surface areas and uniform mesopore size di...
Autori: Adrian Ungureanu, Alexandru Chirieac, Brindusa Dragoi, Cezar Catrinescu, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25263

AbstractThe investigation focused on the impact on the environment caused by a dairy farm which supplies SC CAMYLACT LTD Panaciwith raw materials, a milk processing unit whose impact on the environment was analyzed. The material balance for the activityon the farm was resized and, thanks to this, the synthetic indicators of the impact on the environment, such as the specificinfluents of materials and specific effluents could be calculated....
Autori: Constantin Hutupas, Mihai Nicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25276

AbstractBiosorption an alternative process is the uptake of heavy metals from aqueous solutions by biological materials. The biosorption of nickel ions from aqueous solution was investigated by Nordmann fir (Abies nordmanniana (Stev.) Spach. subsp. nordmanniana) in a batch adsorption system as a function of pH, initial metal concentration, biomass dosage, contact time. The data showed that the maximum pH for efficient sorption of Ni(II) was 6.5. At the optimal conditions, Ni(II) ion biosorption ...
Autori: Handan Ucun, Ozkan Aksakal, Yusuf Kaya
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25295

AbstractNowadays, energetic utilization of biomass, biotechnology attracts a big attention not only from the environmental point of view but also have a social, political and economical impact. According to the Directive 2003/30/EC of the European Parliament and the European Council the emission of greenhouse gases can be reduced by 49% using bioethanol produced by a manufacturing process based on corn, instead of crude oil based fuels. Moreover in Hungary from 1st of July 2007 only gasoline wit...
Autori: , , Gyula Marton, , Jenő Hancsók, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25312

AbstractObservations and data regarding the intense corrosion and deposit phenomena of the carbon steel tube bundle of the heat exchanger are presented. The bundle ensures the cooling of the light fraction C1 - C5 from the top of the distillation column which carries out the removal of pentane and smaller derivates into the RC equipment. Chemical and mineralogical analyses confirm the aggressive action of the fluids flowing through the exchanger. Tests have been done in order to replace the carb...
Autori: Ana-Daniela Georgescu, Lucian Georgescu, Maria Apostolescu, Nicolae Apostolescu, Ovidiu Georgescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25333

Abstract        The sorption of metal ions from aqueous solution plays an important role in water pollution control and in recent years there has been considerable interest in the use of low-cost adsorbents. Many researchers have tried to exploit naturally occurring materials as low-cost adsorbents, for removing of heavy metals. In this article the removal performance of various low-cost adsorbents derived from agricultural waste or natural material is evaluate...
Autori: Raluca Maria Hlihor, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25379

AbstractIndia possesses a diverse and rich cultural heritage and is renowned as a 'land of festivals'. These festivals attract massive community involvement paving way to new materials such as 'Plaster of Paris' being used for 'modernizing' the representation of idols with very little thought given to the issues of toxicity and environmental impacts. Another dimension to the whole issue is the plight of the artisans and the workers involved in the trade. Owing to the unorganized nature of the in...
Autori: Nanda B. S. Kumar, Raghunath Babu Are, Santosh M. Avvannavar, Shrihari Surathal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25349

AbstractHigh proton conductivity of CsHSO4 opened new opportunities for applications as electrolyte in solid acid fuel cells (SAFC). Relatively recent, it was proved that the accommodation of this solid electrolyte by silica supports improves its proton conductivity. During this work, solid acid CsHSO4 and its composites with mesoporous silica of SBA-15 and MCF-types as host materials were synthesized and studied for the first time. Studies were mainly focused on the influence of mesoporous supp...
Autori: Adrian Ungureanu, Brindusa Dragoi, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25366

Include urmatoarele articole:� Environmental Engineering and Management Journal, Vol. 8 Nr. 2� Bioengineering aspects of tissues culture bioreactors for medicine and environmental applications� Removal of bis (1-chloro-2-propyl) ether from wastewater using sonodegradation and biodegradation� A novel plasma reactor for toluene decomposition in contaminated air flow� Study of the copper (II) removal from aqueous solutions by chelating resin Purolite S930 � Analysis of some metal levels...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25371

â€? Bioremediation of contaminated air using a bioscrubberâ€? Quality risk evaluation of the groundwater resources on the moldavian areaâ€? Electrochemical characterization of some dental materials in accelerated environmental testingâ€? Preliminary study of simple and Fenton oxidation with hydrogen peroxide applied on final effluents from a zootechnical farmâ€? The environmental impact assessment caused by the dykes failureâ€? Revaluation of beer industry byproducts – medical implicationsâ€? ...
Autori: http://www.ecozone.ro/reviste.php?RID=25372

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

� Physiological changes in seedling germination and growth plant under chemical stress conditions� Studies on sorption and transport processes of cadmium in soils� Assessment of the anthropogenic impact on water systems by fluorescence spectroscopy� Research on the effects of soil improvement by fertilization on the quality of winter wheat� Halotherapy: From ethnoscience to scientific explanations� Study regarding the sorption of erythrosine from aqueous solution onto soil� Hydroxy...
Autori:
ISSN: 1582 - 9596
http://www.ecozone.ro/reviste.php?RID=25375

AbstractThe main aspects refer to metals and refractory materials behaviour, at high temperature, to materials purifying and to achieve some chemical syntheses.The main technological parameter of the heating is temperature, heating obtained by focusing Sun's rays. The heating can be used inside the furnace to produce metallic material into a crucible, without any complementary power source.For the future, a bigger interest presents some other metals melting, more expensive than steel, such as ti...
Autori: Petrica Vizureanu, Cornel Samoila, Daniel Cotfas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25387

AbstractEquilibrium data of water vapor adsorption from wet air on several materials were experimentally determined at temperature values of 313 and 333 K and air relative humidity values ranged between 30 and 90 %. Experimental data were correlated with Langmuir and Freundlich models. The obtained results emphasize the significant difference between the water retained on the adsorbent materials impregnated with various salt solutions, and on classic adsorbents....
Autori: Ioan Mămăligă, Constantin Baciu, Stelian Petrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25394

AbstractPersistent organic pollutants (POPs) are toxic chemicals that adversely affect human health and the environment around. This group of priority pollutants consists of pesticides, industrial chemicals and unintentional by-products of industrial processes. Natural materials, waste from industry and agriculture and bioadsorbents can be employed as inexpensive adsorbents to remove POPs from environmental components by sorption processes. The paper presents various natural sorbents and some ou...
Autori: Laura Carmen Apostol, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25395

Abstract This paper presents the preliminary results of photocatalytic oxidation of humic acid from water using two types of catalysts, i.e., TiO2 and Ag-doped TiO2 modified zeolite (TMZ and Ag-TMZ). TMZ and Ag-TMZ, with zeolite granulation of 315-500 ?Źm was synthesized by sol-gel method, and the morphology and composition of the unmodified/modified zeolite were characterized by BET (Brunauer–Emmet–Teller) method, X-ray Diffraction (XRD), scanning electron microscopy (SEM) and energy dis...
Autori: Cornelia Ratiu, Carmen Lazau, Paula Sfirloaga, Corina Orha, Daniela Sonea, Stefan Novaconi, Florica Manea, Georgeta Burtica, Ioan Grozescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25397

Abstract Pollution with toxic metals is a serious concern, because once these elements enter in the soil they can be present for a long time, with the potential contamination of drinking water sources. Certain metals in soil may be taken up by plants which are subsequently harvest for human consumption. Our objective was to study the presence of heavy metals in soils, groundwater sources, some medicinal plants from areas of the water sources and in its watery extracts. All of the samples, af...
Autori: Diana Diaconu, Victor Nastase, Mara Mihaela Nanau, Ovidiu Nechifor, Elena Nechifor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25411

Abstract The etching of iron materials in sulphuric acid solutions allows the dissolution of the iron oxides with formation of iron sulphates. The relatively low solubility of the formed sulphates imposes their separation for avoiding the contamination of the etching bath, as well as for preventing the environmental pollution through the wastewater. Within the flow sheet of the processing of the hot or cold rolled steel, a stage of separation by crystallization of iron sulphate is foreseen. T...
Autori: Liliana Lazar, Ion Balasanian, Florin Bandrabur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25415

Abstract Study of geopolymer is a developing field of research for capitalizing solid waste and by-products in the view of new materials achievement having characteristics necessary for using as cement substitute. Also, it provides a solution to many problems regarding environment, such as reduction of gaseous emissions and particles matter resulted from cement industry and raw materials economy. In this paper, the experimental conditions for obtaining new materials on the basis of fly ash f...
Autori: Maria Harja, , Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25419

Abstract Textile industry is one of the most pollutant and water consuming industries. Large quantities of water are required in materials preparation and dyeing, so consumption and waste generation have become serious concerns for textile manufacturers and finishers. Textile effluents are characterized by high values of quality indicators such as BOD and COD, suspended solids and heavy metals. A serious environmental problem and also an aesthetic problem is the color of the effluent. Reactiv...
Autori: Daniela Cailean, George Barjoveanu, Corina - Petronela Musteret, Liliana Rozemarie Manea, Nicolae Sulitanu,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25420

Abstract Transition to a more sustainable economy and the consequences of the Kyoto protocol on global climate change, includes a shift of feedstock for energy and chemical industries from fossil fuels and petrochemicals to renewable resources. The use of vegetal fibers as major source of renewable resources represents a valuable alternative both from economical and environmental points of view. Traditionally, vegetal fibers are widely used in textile industry, paper manufacture, and packagin...
Autori: Dan Gavrilescu, Bogdan Marian Tofanica, Adrian Catalin Puitel, Puiu Petrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25431

Abstract The aim of this study is to investigate the electrochemical behavior of a three casting non-precious dental alloys: Vera PDI (Co-Cr based), Heraenium (Ni-Cr based) and NPG+2 (Cu-Al based) three test solutions: artificial saliva (AFNOR, pH = 8), acidified saliva (pH = 2.5) and fluoridated acidified saliva (1000 ppm F-, pH = 2.5). Open circuit potential (EOC) measurement; potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) are the electrochemical proce...
Autori: Daniel Mareci, Daniel Sutiman, Adrian Cailean, Julia Claudia Mirza Rosca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25435

Abstract This paper aims to propose a new solution for rational valorization of the secondary powder materials from steel makingin electric arc furnaces. The elaborated steel quality as well as the economical advantages represented by secondary powdermaterials recirculation were studied. A good correlation between the proportion of brickets loaded into the melt and the melting ofcarbon has been found. The proportion of the EAF dust brickets can grow even at 5-7%. Zinc presence could havenegat...
Autori: Mirela Gabriela Sohaciu, Avram Nicolae, Cristian Predescu, Stefan Velicu, Gheorghe Gh. Calea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25438

Abstract Using slag in steel making represents a challenge for road construction industry and decreasing environment interactions also.Steel making slag wit granulations of < 10 mm, which today have not a sure solution, represents the research object. The technological research solutions have aimed reducing CaO free content in these slugs, and reducing slug fraction with granulationof ...
Autori: Florian Zaman, Mirela Gabriela Sohaciu, Ecaterina Matei, Cristian Predescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25439

Abstract The European annual consumption of plastic materials has increased from 24.6 Mtons in 1993 to 39.7 M tons in 2003 and it is likely to keep growing. Europe is faced with the challenge of managing millions of tons of waste plastics. At the same time, polymer recyclers and manufacturing industries do not find enough secondary polymers of consistent quality. Plastics production and use has a range of environmental impacts because of the considerable quantity of resources needed as raw ma...
Autori: Peter Rem, Venga Solaria, Francesco Di Maio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25444

Abstract The synergistic combination of polymers and inorganic compounds via sol-gel process has attracted great attention, by manipulating structure at molecular level, for developing new materials with desired properties. These new hybrid materials could have a controllable combination of the benefits of polymers (flexibility, toughness, ease of processing) and those of ceramics or glasses (hardness, durability, thermal stability). The microstructures and the properties of hybrid materials...
Autori: Lucia Dumitrescu, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25446

Abstract At present, dangerous industrial wastes are a main source of environmental pollution because they are stored and deposited improperly. Besides, dangerous industrial wastes could also be a source of secondary raw materials which are not well capitalized. This fact causes substantial losses of secondary raw materials and energy and it is explained by the lack of certain technologies of treatment, capitalization and final removal that are technically and economically sustainable. To ide...
Autori: Neculai Mihailescu, Vasilica Daescu, Elena Holban, Mariana Nicoleta Badea, Jenica Paceagiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25447

Abstract In the new millennium to sustain a healthy life in harmony with nature, it will be extremely important to develop various materials and processes that minimize any harmful influence on the environment. The feasibility of sludge recycling in the brick manufacture was evaluated through laboratory testing. Several ceramic masses with clay, sand and various proportion of sludge have been synthesized and than characterized by their physical-mechanical properties. Sludge fineness also has ...
Autori: Ana - Maria Szoke, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25454

Abstract Mesoporosity of about 7 nm in ETS-10 titanosilicate was generated by postsynthesis treatment with hydrogen peroxide under microwave irradiation, resulting in an increased external surface area of the materials (55 m2/g). The influence of titanosilicate porosity and its surface modification by phosphorus atoms (ET(P)S-10) on the retention of some nanoions (??-emitting radioactive U(VI) and Th(IV) ions) and biomolecules (the proteins cytochrome c, papain, and ??-globulin) was investiga...
Autori: Robert Gradinaru, Sorin O. Valu, Stefan Postolache, Claudiu C. Pavel, Ion Sandu, Karin Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25455

Abstract Arsenic (As)-contaminated drinking water is a major problem around the world. The removal efficiency depends strongly on the size of Fe3O4 sorbents.Fe3O4 prepared in laboratory is more efficient in the removal of As and is also more easily recovered from column of magnetic separator than the commercial materials. This would be beneficial in a water treatment system because the As-contaminated Fe3O4 could be flushed from the column permitting reuse of the separator system. The dispers...
Autori: Ionel Balcu, Adina Segneanu, Marius Mirica, Mirela Iorga, Catalin Badea, Iuliana Firuta Fitigau
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25456

Abstract This work investigated the sorption removal of chromate anion, in single batch systems, from aqueous solutions. The process involves the sorption of the chromate by a series of Mg/Zn-Al - type hydrotalcites, with four Mg/Zn/Al ratios, in two forms: uncalcined and calcined at 500 °C. The calcined Mg-Al (Mg/Zn/Al = 2/0/1) material showed the highest sorption capacity: 35.7 mg/g. The three-parametered Langmuir-Freundlich model approximated the experimental equilibrium data over the con...
Autori: Laura Cocheci, Rodica Pode, Eveline Popovici, Emiliana Dvininov, Aurel Iovi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25461

Abstract In designing an efficient photovoltaic system, the meteorological data of the system location must be considered. Field data registered over years prove the importance of the implementation site characteristics in the design and optimal exploitation of a PV system, because wetting and atmospheric gaseous and particulate pollution can strongly distort the incident solar radiation. Thus, in addition to the efficiency of the solar module, the tracking efficiency, the clouds crossing fac...
Autori: Dorin Valentin Diaconescu, , Ioana Sinziana Hermenean, Maria Monica Vatasescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25464

Abstract Wood has been used as an engineering material because it is low in cost, renewable and strong and it requires low processing energy. Wood has many excellent properties that result from its exceptional combination of microstructural, ultrastructural and molecular features. The main drawback is its dimensional instability in the presence of moisture, which can affects also the biological stability. Wood is susceptible to degradation in a number of ways, including rot or decay, insect a...
Autori: Lucia Dumitrescu, Ileana Manciulea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25473

Abstract A crucial stage which makes the other directions of development of membrane processes is getting new membrane materials, to meet increasingly stringent of selectivity and productivity. Polyetheretherketone shows high stability against chemical and physical agents but is poorly soluble in most common solvents. Present studies on obtaining the support of the polyetheretherketone membranes were limited by: solubility of polyetheretherketone in concentrated sulfuric acid and fast speed a...
Autori: Mihaela Emanuela Craciun, Aurelia Cristina Nechifor, Florin Aldea, Gheorghe Nechifor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25475

Abstract Corrosion control, using inhibitors like, polymerisable porphyrins and multifunctional nanocomposites, is extremely useful in many environments. Phosphogypsum is a waste product resulted from the process of obtaining the phosphoric acid and it can be also used as corrosion inhibitor; in a mixture with other coating materials. Two types of modified porphyrin: Na4TFP Ac - dissolved in KOH and H2SO4 and H2TPP - dissolved in benzonitrile, were tested. The structure characterization of pho...
Autori: Ionel Balcu, Adina-Elena Segneanu, Marius Constantin Mirica, Mirela Ioana Iorga, Corina Amalia Macarie, Iuliana Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25477

Abstract Changing fuel consumption to a more ecological environmentally alternative is replacing fossil fuels with fuels generated from renewable resources. Ethanol, a renewable fuel, can be produced mainly from crops, lignocellulosic biomass and different other environmental wastes. Although ethanol has been produced mainly from crops, there is a great interest in using cheaper lignocellulosic materials as a feedstock for ethanol production. The aim of this paper is study of dilute acid hyd...
Autori: Ionel Balcu, Adina-Elena Segneanu, Marius Constantin Mirica, Mirela Ioana Iorga, Corina Macarie, Raluca Martagiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25481

Abstract Highly dispersed nanoparticles of transition and noble metals are utilized for hydrocarbon reactions and rearrangements important to the chemical industry. The need to obtain 1 to 3 nm particles with narrow size distributions has prompted the development of alternative processing methods. Due to widespread speculation concerning the enhanced properties of nanoparticles over their bulk and atomic material equivalents, nanoparticle synthesis has become an active field of research withi...
Autori: , Irina Dumitriu,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25482

Abstract Application of ozone is known to yield favorable results in purification of phosphate plant water from elemental phosphorus, in treatment of water of alkali aluminate solutions of aluminum plants, in decontamination of cyanide-containing waste water of enrichment plants, and so on. It has been proved that halogen-containing compounds, most of which have mutagenic properties, and some of which are carcinogenic to humans, are formed when water is treated with chlorine. Conclusions made...
Autori: Irina Dumitriu, ,
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25483

Abstract Various specialists draw attention on the conflict between the industrial civilization and the environment and mention two aspects: 1. The tendency of depletion of natural energy resources, raw materials and food, or consumption of renewable into a rhythm superior to their capacity of regeneration 2. Physical damage and pollution of the environment: water, air and land. It can be said that a sustainable society is the one that shapes its economic and social system so that natural ...
Autori: Dan Duran, Irina Duran, Ciprian Costescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25485

Abstract The concept of sustainable development has emerged in order to correlate the need to continue increasing the level of human and increasingly fragile â€?health?? level of environment. At the industrial level, things have moved more quickly. Thus, many companies use waste as fuel, and in some localities they are trying to implement systems for heating cottage on the combustion of waste. They are first to have acknowledged the eco-economical importance of recovery and reuse waste....
Autori: Dan Duran, Irina Duran, Adrian Diaconu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25488

Abstract In order to reduce the cement content used in concrete production utilization of waste materials for substitution of a part of cement can be considered. In this study, two pozzolanic-waste materials, silica fume and fly ash, are used as a part of cement up to 12% and 40%, respectively in concrete and compressive strength as well as permeability properties were determined. The test results were evaluated by using the response surface method. By keeping the cement content in concrete c...
Autori: Dogan U. Anil, Ozkul M. Hulusi, Ekincioglu Ozgur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25490

Abstract The evolution of the request in wood production leads to larger stem wood consumption, intensive harvesting and consequently the environmental impact increases. One of the most ignored secondary resources in spite of limited reserves, branch wood could be used in new added value products as an alternative to stem wood, providing its characteristics are known and understood. This paper is part of a larger research project, which here compares the compression strength parallel to the g...
Autori: Lidia Gurau, Marina Cionca, Cristina Timar, Alin Olarescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25492

Abstract Macro-Defect-Free (MDF) cements are polymer-cement composites characterized by high value of flexural strength. Due to their thermal and electrical insulating properties, MDF cements could replace other insulators obtained by environmental non-friendlier technologies or being themselves toxic and non-biodegradable. MDF cements obtained by the use of an ecologic polymer (poly(vinyl alcohol)) shows high mechanical resistance in the initial state but also it’s dramatic decrease after ...
Autori: , Georgeta Moise, Hulusi Ozkul, Ozgur Ekincioglu, Catalin Croitoru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25493

Abstract Molecular imprinting is a versatile and ecological method for obtaining polymeric materials with a lot of applications in the field of pharmacy, medicine and biosensor assays. In this work, a new method of alternative molecular imprinting to design imprinted poly (vinyl alcohol) films has been proposed. Glycyrrhizinic acid has been used as template molecule. To demonstrate the obtaining of the molecular imprinted poly (vinyl alcohol) and its selectivity, studies of glycyrrhizinic and...
Autori: , Catalin Croitoru, Georgeta Moise
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25495

Abstract Waste management hierarchy has as priorities waste recycling and energy recovery. Unfortunately, Romania is in the situation so as the waste landfilling is still considered as a suitable solution for waste management. European Union imposed a number of regulations and programs in the field of waste treatment and management that Romania must comply. The paper describes some aspects regarding characterization of the leachate originating from the Tomesti landfill (situated in Iasi County...
Autori: Ana-Maria Schiopu, Brindusa Mihaela Robu, Ion Apostol, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25523

Abstract In the paper is analyzed the possibility of using some industrial wastes for obtaining new building materials. From the industry or from the power station a lot of by-products or wastes have resulted and their storage is a big problem for the environment. In the building material industry a part of these wastes can be used in different ways: for replacing the cement, as addition in concrete, as component of cements, in the mixture of polymer concrete, etc. In the present investigati...
Autori: Marinela Bărbuţă, Nicolae Taranu, Maria Harja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25525

Abstract The use of appropriate leaching tests and leaching models can help to predict the hazardous components release from cementbased solidified waste during either utilization or disposal. Numerous parameters influence the leaching rates such as grain size/specimen size,ccc liquid-to-solid ratio, pH value of the leachate, leaching time etc. This study evaluates the effect of initial liquid-to-solid ratio of cement paste on the release of copper from cement-based solidified waste. Dynamic ...
Autori: Constantin Bobirica, Liliana Bobirica, , Ionel Constantinescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25527

Abstract Sorption is one of the several methods that have been successfully utilized for dyes removal. A large number of materials have been used as suitable sorbents for decolourization of industrial effluents: activated carbon (the most common but expensive adsorbent), polymeric resins, various low-cost adsorbents (agricultural and industrial by-products, peat, chitin, silica, bentonite, other clays, fly ash). Our paper is a review about our researches regarding different types of industri...
Autori: Daniela Suteu, Carmen Zaharia, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25532

Abstract The paper presents the surfactant-assisted solvo-thermal route to synthesize nanoparticles of cerium oxide with different shape and morphology. The precursor was calcined at 400°C for 4 h in order to obtain CeO2 nanoparticles. The obtained samples were characterized by means of thermal analysis and FTIR spectroscopy. The UV-Vis analysis was used to study the optical properties. The morphologies and nano-structures were characterized by scanning electron microscopy (SEM) and XRD. It...
Autori: Nicolae Apostolescu, Gabriela Carja, Gabriela Apostolescu, Elena Husanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25541

Abstract Geopolymerization is a continuous developing field of research for utilizing solid waste and by-products. It provides a solution to many problems where hazardous residue has to be treated and stored under critical environmental conditions. Consumption of fly ash in the manufacture of geopolymer is an important strategy in making materials more environmentally friendly. Fly ash has been chosen as a base material in order to utilize this industrial waste. Previous researches have show...
Autori: Maria Harja, Marinela Bărbuţă, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25542

Abstract In this work the experimental conditions to synthesize, by direct hydrothermal synthesis, self-bonded pellets of ETS-10 phase containing iron were studied. The following gel composition was used: xNa2O-0.6KF-1.28xHCl-yFe2O3-0.2TiO2-1.49SiO2-39.5H2O with 0.8Â???xÂ???1.4 and 0.015Â???yÂ???0.08. The products obtained were characterized through X-ray diffraction on powders (XRD), thermal analysis (TG, DSC, DTG), scanning electron microscopy (SEM) and microanalysis (EDS). The data obtai...
Autori: Pierantonio De Luca, Danilo Vuono, Monica Filice
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25544

Abstract Starting from the disadvantages of the polystyrene system – the most important being that they are not biodegradable and their life cycle is relatively small, up to fifteen years – there were conceived several structures for outside walls made of perforated bricks vertically disposed and filled with granular materials. In this manner the thermal resistance is improved knowing that in gaps bigger than twenty millimeters there appear convective streams which substantially decrease ...
Autori: Răzvan Giuşcă, Vladimir Corobceanu, Raluca Giusca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25551

Abstract This paper introduces and analyses the results of some research regarding the recovery of fine chips from the slurry resulted from the finishing operations (grinding) of the parts used in automobile industry. Little chips, in the form of slime, represent a very important source of raw materials when preparing the powders and at the same time it can be appreciated that the volume of these chips in the form of slurry is high enough so that its use can substantially diminish the product...
Autori: Olimpia Ghermec, Cristian Ghermec, Marin Didu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25552

Abstract The textile wastewaters have a diverse composition depending both on the used raw materials and applied manufacturing technologies. These wastewaters may contain various pollutants such as organic compounds (e.g. residual dyes), suspended solids, metal ions etc. Most of dyes are synthetic compounds with aromatic molecular structures and non-biodegradable. The oxidative destruction via homogenous oxidation processes with hydrogen peroxide (simple chemical oxidation with H2O2 or advanc...
Autori: Carmen Zaharia, Daniela Suteu, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25570

Abstract This work presentes a study of preparation and stability in aqueous medium of complexes obtained by the reaction between Fe(III) with 2-amino-6-methoxy-benzothiazol-sodium sulphonate ??†’1 naphtol-4-sodium sulphonate. In this purpose, the investigation methods applied were as follows: pH-metry, conductometry, and the UV-VIS spectrophotometry. The molar combination ratio of ligand to central metallic atom, and the stability constants for new obtained compounds were determined usin...
Autori: Doina Sibiescu, Gabriela Carja, Ioan Roşca, Laura Chirila, Mihaela Vizitiu, Romen Butnaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25585

Abstract Commercial pure titanium (Cp-Ti) and titanium alloys are used on large scale in restorative dentistry due to their advantages as compared with other similar materials: chemical inertia, low density, high strength, high corrosion resistance in biological media and increased biocompatibility.The effect of fluoride and pH on the corrosion behaviour of Cp-Ti and a new Ti50Ta alloy were examined by open circuit potential (EOC) measurement, linear polarization, potentiodynamic polarization...
Autori: Daniel Mareci, Daniel Sutiman, Georgiana Ciurescu, Igor Creţescu, Romeo Chelariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25591

Abstract The use of biomaterials as biosorbents for treatment of wastewaters will provide as a potential alternate to the conventional treatment methods. The main advantages of biosorption are high selectivity , cost effectiveness and good removal performance. World wide numerous low cost bio materials have tried for biosorption of dyes. In this present investigation, the dead biomass of Penicillium sp. fungus and wood sawdust was used as biosorbents and their capacity to removed malachite gr...
Autori: Cornel Pohontu, Florin Luca, Igor Creţescu, Manea Liliana, Mariana Diaconu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25593

Abstract The former Arad Chemical Fertilizer Plant had an important polluting effect on environment and, although it was shut down in 1990, its environmental heritage still exists. The paper contains a short description of the former plant and its impact on the environment, mainly on the quality of water and soil and emphasizes the effects of polluting heritage that still exists. Today, one of the major problems on the platform of the former Fertilizer Plant is the existence of all concrete b...
Autori: Aurica Grec, Florin Dumescu, Ladislau Klein
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25599

? STUDY OF BIODIESEL PRODUCTION FROM OILSEED PLANTS II. EVALUATION OF BIODISEL PRODUCTION FROM SOME CULTIVARS OF RAPES ? STUDY OF BIODIESEL PRODUCTION FROM OILSEED PLANTS I. EVALUATION OF THE GENETIC SIMILARITY OF SOME Brassica Napus CULTIVARS USING RAPD MARKERS ? STRUCTURAL CHARACTERIZATION AND IN VITRO CYTOTOXIC POTENTIAL OF COAL DUST IN A ROMANIAN POWER PLANT ? MUNICIPAL SOLID WASTE MANAGEMENT IN BENGHAZI (LIBYA): CURRENT PRACTICES AND CHALLENGES ? COMPARATIVE ENVIRONM...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25661

? COMPARATIVE CONSIDERATIONS ON THE STRUCTURE OF SOME MOLYBDENUM/NIOBIUM DOUBLE PEROVSKITES OXIDES ? THE INFLUENCE OF THE STORAGE TIME ON THE STABILITY OF BUTTER ? CaCO3 CONTROLLABLE SYNTHESIS BY DOUBLE EXCHANGE METHOD USING CaCl2 RESIDUAL SOLUTIONS ? OPTIMIZATION OF COAGULATION-FLOCCULATION IN THE TREATMENT OF CANAL WATER ? ANODIC DETERMINATION OF PENTACHLOROPHENOL FROM WATER USING CARBON NANOFIBER-BASED COMPOSITE ELECTRODE ? STUDY OF PRECIPITATES GROWTH IN COAGULATION ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25663

? COMPACT MICROPULSE BACKSCATTER LIDAR: AIRBORNE AND GROUND-BASED APPLICATIONS ? STUDIES OF THE IMPACT OF AEROSOL OPTICAL PROPERTIES ON CLIMATE CHANGE PROCESSES ? A STUDY OF THE AEROSOL OPTICAL PROPERTIES AT TWO AERONET STATIONS FROM ROMANIA ? COMPLEMENTARY ATMOSPHERIC URBAN POLLUTION STUDIES IN THE NORTH-EAST REGION OF ROMANIA, IASI COUNTY ? ?NGSTR?M TURBIDITY IN THE LOWER LAYERS OF THE TROPOSPHERE ? LIDAR MONITORING OF ANTHROPOGENIC POLLUTION AND NATURAL PHENOMENA ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25665

? HYDROGEL MICROSPHERES BASED ON ENVIRONMENTALLY FRIENDLY POLYMERS WITH POTENTIAL BIOMEDICAL APPLICATIONS ? STUDY ON THE MIXING EFFICIENCY IN A BASKET BIOREACTOR WITH IMMOBILIZED YEASTS CELLS ? MANAGEMENT OF WASTE FROM ELECTRICAL AND ELECTRONIC EQUIPMENT IN CYPRUS ? A CASE STUDY ? SEPARATION AND CHARACTERIZATION OF ANTHOCYANINS BY ANALYTICAL AND ELECTROCHEMICAL METHODS ? AN INTEGRATED DECISION AID FOR IDENTIFYING AND PRIORITIZING STRATEGIES IN FOREST MANAGEMENT ? INFLUEN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25668

Carbon issue is becoming more important all over the world. Plate glass is a typical kind of building materials and the life cycle carbon emission of plate glass is a big contributor, resulting from the energy consumption in the stages of its life cycle which includes four aspects: raw materials acquirement, materials transportation, production and embodied consumption of energy carriers. Based on the relevant data calculation from China’s condition, the life cycle carbon emission of plate gla...
Autori: Meng Liu, Wenlong Li, Qunying Cheng, Yueer He, Xinyun Caohttp://www.ecozone.ro/reviste.php?RID=25672

Slag-Fly Ash Based cementitious material materials with high volume of fly ash and slag and less cement clinker was prepared, with low water requirement, well fluidity and with high strength, and can be used to the preparation of High Performance Concrete (HPC). When the W/C is 0.36, the 28d compressive strength is 58.93 Mpa, 28d flexural strength is 14.26 Mpa. By XRay diffraction analysis (XRD) and Scanning Electron Microscope (SEM) analysis, the results show that main materials in grinded samp...
Autori: Chenghong Fu, Wen Ni, Hui Wu, Mingyang Tianhttp://www.ecozone.ro/reviste.php?RID=25708

Abstract:Point of zero charge (PZC) is defined as the condition at which the surface charge density of a material equals to zero and, formost of the solids it is strongly pH dependent. The PZC can be controlled by tuning the solid surface properties (crystallinestructure, morphology) and by a proper environment control, thus it is important to evaluate the PZC for a certain type of material,in given working conditions, for enhancing the efficiency in the targeted application (e.g. layer by layer...
Autori: Laura Maria Bertus, Radu Adrian Carcel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25721

Abstract:This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referredto as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chainsincluding activities after end-of-life of products, (2) value communication between stakeholders in extended value chains, and (3)creating an integrated development approach for optimized bio-based products. Most existing models for v...
Autori: J.W. Lin, Jarmila Kopecká, Kim Ragaert, Ludwig Cardon, Maarten De Groote, Rolf Koster
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25728

Abstract:The operation of solar air heat collectors consists in a sequence of transient regimes, being conditioned by the availability in timeof the solar resource. This paper presents the results of an experimental research on transient regimes of two types of solar air heatcollectors. The absorbers of the collectors have different configurations and are made of different materials. One collector is acommercial passage air collector with the absorber made of aluminum. The other collector is an ...
Autori: Adrian Ciocănea, Andrei Dragomirescu, Sanda Budea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25731

Abstract:The demand for new and high performance products in the automotive industry is increasing exponentially and this trend imposesinnovative concepts for cars. The future solutions for the automotive industry may find their answer in the fabricationtechnologies and also in alternative propulsion and energy production.The car design field cannot ignore the global economic crisis, imposing new approaches in terms of materials and cost effectivetechnologies and by the means of environmental pr...
Autori: Mihai Comşiţ
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25733

Abstract:The drying of biological materials plays an important role in influencing energy savings, quality of end-products and alsoenvironmental issues. Several new approaches in application of solar dryers and a great number of biological materials have beendeveloped. In the paper the background of solar drying, current solar drying arrangements, and some of the recently focusedbiological products such as grain, fruit, vegetable etc. are selected and discussed. Additionally an integrated energy...
Autori: Istvan Farkas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25745

Abstract:This technical paper presents some aspects concerning the static finite element analysis of a wind turbine blade. For themanufacturing of the blades for a 10 kW wind turbine elaborated at the Technical University of Moldova composite materialsmade up of polyester matrix reinforced with fiber glass are being used. In order to determine the mechanical properties of theproposed composite materials 10 different samples of laminated composite plates were numerically simulated in ANSYS 11....
Autori: Marin Guţu, Viorel Bostan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25747

Abstract:This paper aims to analyze two types of wooden briquettes made from different raw material, in order to determine thecompactness of the wood used, namely their compaction coefficient. This factor is a new feature of briquettes that defines moreprecisely the quality of them. The density of raw material and briquettes causes the compaction coefficient, namely the ratiobetween them. Relevance of research and scientific innovation results from the fact that European standard of wooden briqu...
Autori: Aurel Lunguleasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25753

Abstract:Hydrothermal synthesis was used to obtain nanostructured TiO2 based nanopowders. There were prepared pure and ZrO2 dopedcompositions consisting mainly of anatase phase with crystallite size up to 20 nm. The agglomerates of the as-synthesizedmaterials had dimensions ranging from a few hundreds nanometers to 200 microns. The investigations concerning the thermalbehavior revealed the presence of an exothermal effect at around 550oC which could indicate a possible phase transformation ofana...
Autori: Adrian Mihail Motoc, Anca Duta, Oana Raita, Radu Adrian Carcel, Radu Robert Piticescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25758

Abstract:The oxidation of low grade complex concentrates (Cu, Pb and Zn) in aqueous media (weak alkaline) oxidized nonferrous metalsconcentrates is carried out at high pressure. Leaching is the subsequent processing step in metal extraction. The paper studies theinfluence of some parameters (temperature, time, L:S ratio, excess) on the leaching efficiency of nonferrous metals from oxidizedconcentrate. The optimum parameters determined are: S/L ratio of 10/1, 25% reactive excess, leaching tempera...
Autori: Cornelia Lupu, Dragoş Taloi, Liliana Gherghe, Luminita Mara, Teodor Velea, Vasile Predica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25774

Abstract:The aim of this work is to obtain sintered porous membranes with graded structure for microfiltration by sedimentation andsintering of metallic powders. Our previous studies have demonstrated the possibility of obtaining sintered porous materials withgraded structure by sedimentation. In this paper, spherical nickel particles were used having a grain size in the 2-90 Âľm rangemeasured by the laser scattering particle size analyzer. The powders were sedimented into a sintering die in a s...
Autori: Gyorgy Thalmaier, Ioan Vida-Simiti, Nicolaie Jumate, Niculina Sechel, Valentin Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25775

Abstract:Lightweight materials are more viable for use in invariably hot or cold climates than in temperate climates. However, it is possibleto use lightweight construction systems and specifically membranes even in housing buildings in temperate climate areas, if theirproperties are well explored, allowing better environmental performance and cost effectiveness than conventional solutions. In theouter skin and in dividing elements, architectural membranes can be used as thermal regulators, for ...
Autori: António Pedro Reis, Joăo Pedro Couto, Paulo Mendonça
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25781

Abstract:This study is focused on the influence of Co and Cu ions located in Zn/Ni/Al matrix on the structural, textural and catalyticproperties of layered double hydroxides (LDHs). The samples were prepared by co-precipitation (Ni2+/Co2+(Cu2+)=0.25;M2+/M3+=2)) at low super-saturation and afterwards characterized by XRD, nitrogen physisorption, thermogravimetry, FT-IR, DRUV-Vis and TPR. The XRD results show that the resulted solids are well crystallized and contain only pure phases of LDHs.Also,...
Autori: Adrian Ungureanu, Alexandru Chirieac, Brindusa Dragoi, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25789

Abstract:Titanium metal and its alloys have been widely used as implants under load-bearing conditions due to their biocompatibility, excellent corrosion resistance and lightness, but their inability to bond to living bone is a setback. The experiments outlined here investigated hydroxyapatite (HA) coating on Ti metal implants, used to enhance their bioactive properties. In this study, specimens of commercially pure titanium (c.p. Ti) and Ti-6Al-4V were etched in either H3PO4 or HCl, and subsequ...
Autori: Chao-Lun Fu, Hsueh-Chuan Hsu, Shih-Ching Wu, Shih-Kuang Hsu, Wen-Fu Ho
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25795

The aim of this work is the study of activated sludge floc samples stained with different dyes and imaged by Confocal Laser Scanning Microscopy (CLSM). Activated sludge flocs were stained for lipids, sugars and esterase enzyme producing bacteria. Images were acquired for different samples to analyze the structural characteristics of the bioaggregates. The analysis of the CLSM images allowed for the localization and estimation of the quantity of different build-up materials. The 3-D reconstructio...
Autori: Bela Abraham, Botond Raduly, Dan Niculae Robescu, Szabolcs Lanyi, Szabolcs Szilveszter, Szilard Bucs
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25937

The purpose of this study was to prepare new nanocomposite catalysts of Metal/LDHs type by mild reduction of transition metal cations Co2+ and Cu2+ substituted in the matrix of ZnAl-LDH at 150°C and atmospheric pressure, under hydrogen flow. To this end, a series of ZnCuCoAl layered double hydroxides (LDH) precursors were synthesized by co-precipitation method. M2+/M3+ (i.e., Zn2+/Al3+) molar ratios were kept constant while the Cu2+/Co2+ molar ratios were varied in order to investigate their in...
Autori: Adrian Ungureanu, Alexandra Sasu, Alexandru Chirieac, Alina Moscu Corcodel, Brindusa Dragoi, Constantin Rudolf, Emil Dumitriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25852

The composite materials based on natural zeolite and undoped and N-doped TiO2, i.e., Z-Na-TiO2 and Z-Na-TiO2-N, were successfully synthesized by solid-state reaction in microwave-assisted hydrothermal conditions. Undoped TiO2 and N-doped TiO2 nanocrystals were previously synthesized by sol-gel method. The X-rays diffraction results of TiO2 nanocrystals indicated that anatase TiO2 is the dominant crystalline type. The composite materials were structural and morphological characterized by X-ray di...
Autori: Cornelia Bandas (Ratiu), Carmen Lazau, Paula Sfirloaga, Florica Manea, Rodica Pode
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25911

Among the different types of waste products tested, the bark of different Pinus species have been identified as a promising class of low- cost sorbents for heavy metal binding. In this context, the potential of Romanian pine bark wastes as green and economical sorbent for cadmium (II) ions removal from aqueous solutions has been tested in batch conditions as function of initial pH, contact time, sorbent dose, metal ion concentration and temperature. The equilibrium data at three different temper...
Autori: Anca Miron, Brindusa Robu, Carmen Paduraru, Lavinia Tofan, Roxana Laura Mihailescu Amalinei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25871

Fly ash and fly ash based zeolites are inorganics used for improving soil quality. In the current paper, the hydrothermal modification of fly ash was studied. Three methods have been employed for this purpose. The first method involved the use of an autoclave, where synthesis has been performed at a temperature of 120 0C and a treatment time of 4 to 8 hours. Within the second method, the modification of the ash at a temperature of 600 0C by fusion was carried-out. In this method, a mixture of as...
Autori: Corneliu Munteanu, Daniel Bucur, Lacramioara Rusu, Maria Harja, Marinela Barbuta, Ramona Carla Ciocinta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25885

The paper proposes a method and a technology that allows the generation of a very high intensity magnetic field, at a high pressure and within an extremely short period of time into a ferrous material, in order to study the behavior of such material from the magnetic and structural perspective. The method consists in producing the �compression� of an initial magnetic flux that is generated in a coil that has inside a ferrous material cylinder (the armature), subject to testing, done by a con...
Autori: Nicolae Badara, Octavian Tarabuta, Vasile Dobref
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25887

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

This special issue of EnvironmentalEngineering and Management Journal is dedicated tointerdisciplinary research and discusses multipleresults addressing environmental issues inElectromagnetic Compatibility (EMC) andEngineering in Medicine and Biology (EMB) areas.Some of the most significant researchdirections considered in this issue entail theelectromagnetic pollution together with a survey ofelectromagnetic environment in order to analyze andquantify the biological and health effects ofelectro...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25990

The first edition of the International Conference„ECOIMPULS 2012- Environmental Research andTechnology” plans to open a conference seriesdedicated exclusively environmental issues. Thescientific topics are devoted to the on-going research onenvironmental topics regarding: „Environment – apolitical, economic and social responsibility”,„Water in a changing world”, „ZERO – waste cities”and „ Energy – beyond the conventional”.This scientific event aims to bring togetherprofessionals, academics, scie...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26015

AbstractIn this paper the synthesis, characterization and testing of composite material based on multi-wall carbon nanotubes and silverdopednatural zeolite (MWCNT-ZAg) has been investigated for humic acid (HA) adsorption. The surface characterization of thecomposite material has been investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM/ EDX) analysis.The Langmuir and Dubinin-Radushkevich (D-R) models fitted the best experimental data informing that adsorption process ofH...
Autori: Aniela Pop, Corina Orha, Florica Manea, Virgil Tiponut
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26023

AbstractMultifunctional materials based on iron substituted anionic clays and their derived mixed oxides owning specific porousproperties and textural characteristics are synthesized, characterized and tested as photocatalysts in the process of the azo-dyesdegradation from aqueous solutions. The features of X-ray diffraction patterns point out the modification of the lattice parameterswhen Fe3+ is substituted Al3+ in the brucite like layer. N2 adsorption-desorption analysis reveals specific poro...
Autori: Carmen Gherasim, Gabriela Carjă, Magda Puşcaşu, Mihaela Bîrsanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26024

AbstractThe performance of two cation exchanger resins, Amberjet UP1400 and Amberlite IR120 in the process of Cs(I) ions removalfrom aqueous solutions was examined. Batch experiments were carried out to determine the influence of several parameters(resin dosage, contact time, temperature and initial concentration of Cs(I) ions) on the removal process. The equilibrium wasreached after 60 min for Amberlite IR120 and after 120 min for Amberjet UP1400, with an overall adsorption performance of~97% f...
Autori: Adina Negrea, Cornelia Muntean, Corneliu Mircea Davidescu, , Mihaela Ciopec, Petru Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26032

AbstractA comparative study regarding the shape, dimension and bactericidal activity of the undoped and Ag-doped TiO2 nanocrystalswas achieved. In this way, two hydrothermal methods, classical hydrothermal and microwave-assisted hydrothermal, was usedfor nanoparticles synthesis. The obtained materials were investigated by X-ray diffraction, DRUV-VIS spectroscopy, BET andSEM/EDX analysis. Antibacterial activity of undoped and Ag-doped TiO2 materials was tested on real water from Bega River.The be...
Autori: Carmen Lazau, Corina Misca, Corina Orha, Cornelia Bandas, Sorin Olariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26034

AbstractWater quality is an inportant concern for the ecosystem state from a particular region. Since the continuous urban and economicdevelopment induces a negative impact on entire hydrological cycle, this study investigates the water quality of a Romanian lake,located in the Surduc area - Timis County. This perimeter has undergone significant economic development in the past twodecades due to increased tourism potential and the number of holiday residences.We proposed hybrid materias for the ...
Autori: Adina-Elena Segneanu, Cornelia Bandas, Florentina Cziple, Ioan Grozescu, Paula Sfîrloagă, Titus Slavici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26040

AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

Mother Earth Investments AG, is actively working onthe development 2nd generation bioenergy feedstocks.In this book, Mr. Jansen generously shares hisknowledge in the field, in particular, regarding thechallenges and opportunities in development ofbiomass-derived fuels. This essential guide toinvesting in bioenergy commodities details secondgeneration biofuels from a scientific, technical andeconomic perspective, and discusses their globalenvironmental, political and financial impact.The book is ...
Autori: Roland A. Jansen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26100

The book edited by Haibo Xie and NicholasGathergood focuses on one of the most importantscientific issues of the 21 century which is thereplacing fossil fuel with sustainable alternatives suchas biomass. Fossil fuels are conventional rawmaterials for many industrial sectors includingchemical and energy production. Usage of fossil fuelis limited by their availability, price and carbonfootprint. Biomass is a renewable resource globallyavailable, cheaper and carbon sequestering. Step bystep shiftin...
Autori: Adrian Catalin Puitel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26101

Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

Abstract Waste recycling represents a very significant issue for the protection of our environment. Large waste quantities (slag and ashes) are products of the coal extraction industry and its subsequent combustion in thermal power stations. The possibilities of obtaining crystallized glasses in the CaO-Al2O3-Fe2O3-SiO2 system by introducing in the raw materials mixture ashes from Mintia Deva thermal power station have been studied. The physical and chemical characterization of the...
Autori: Firuţa Goga
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26121

Abstract In order to accomplish the water quality standards required for a specific use, the continental surface water is treated through a sequence of operations and unit processes. The treatment technological flowsheets carry out, partially or totally, the removal of various pollutants, every treatment step being used for improving one or more qualitative parameter. The treatment scheme is specific to water source type and water use. One of the basic operations for water treatmen...
Autori: Oana Tirtoacă Irimia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26136

AbstractAs a new type of photoelectrocatalytic materials, the TiO2 nanotube arrays have drawn a lot of attention for efficientlyphotoelectrocatalytic organic pollutants degradation due to their highly photoelectrocatalytic properties. Yet, the performance ofphotoelectrocatalytic organics degradation using TiO2 nanotube arrays electrode is influenced by Cl-, a kind of typical reducingmaterial. This paper focuses on the effect of Cl- on the different photoelectrocatalytic performance of TiO2 nanot...
Autori: Jialing Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26177

AbstractConsidering the advantages of steel surface hardening, when less expensive low- and medium- carbon steels can be surfacehardened without the problems of distortion and cracking associated with the through hardening of thick sections, we developedsome research entailing the increase in environmental performance of iron powders carburizing process using methane as carrier.Apart of studies on optimal working parameters and methods, our research addresses improvements in environmentalperform...
Autori: Olimpia Ghermec
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26198

AbstractThe transport of hazardous substances is an essential economic activity because it represents a quite relevant percentage of thetotal goods transportation. The risk associated to such an activity is fundamentally related to the possibility of an accidenttriggering that may cause negative environmental and public health consequences. A recent example is the Viareggio accident(2009), which involved the blast of tank wagons containing liquefied petroleum gas (LPG) and caused more than thirt...
Autori: Vincenzo Torretta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26200

AbstractWastewater sludges are organic and nutrient-rich materials that could be used to improve soil tilth. However, the land applicationof sludge needs to be properly managed to avoid the detrimental effects on micro and macroorganisms in the soil. Earthwormsare one of the most important soil macroorganisms. Addition of sludge to the soil environment may impact earthworm activity,and in turn, soil productivity and health. In this study, sludge from the canned food industry was added to soil mi...
Autori: Efsun Dindar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26238

AbstractThe paper analyses the opportunity of recycling sewage sludge in the manufacturing of ceramic building materials. Wastewatertreatment plants (WWTP) produce annually a great volume of sludge and its processing become more difficult. On the otherhand, there is an increased need to develop new alternatives beyond the already known methods. The use of WWTP sludge asraw material for the production of bricks may become an interesting alternative, both from an industrial and environmental point...
Autori: Anna-Maria Szőke
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26251

AbstractInvestigations on thermochemical transformation of asbestos fibers followed by computer aided image analysis are presented.Asbestos Containing Wastes (ACW), notably asbestos-cement, were characterized before and after microwave heating withadditives aimed at reacting with and transforming asbestos fibers. Microprobe analysis helped determine the chemicalcompositions. X ray diffraction (XRD) was used to confirm decomposition of asbestos fibers during microwave heating. Electronparamagneti...
Autori: Yan Yvon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26256

AbstractThe construction industry is one of the main sectors of energy consumption and carbon emissions in China. The new-types ofbuilding materials can be produced by recycling industrial solid wastes which is an effective solution to development of greenbuilding materials and abatement of environmental emissions. In this paper, new-types of bricks made of fly ash (residuesgenerated in coal combustion) and coal gangue (a kind of solid wastes generated in coal mining and coal production) and the...
Autori: Haitao Zhang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26265

AbstractThe extent of the problem of the excessive fluoride in drinking water remains an important health issue. In the present work,strong-base anion resins were investigated to assess their sorptive removal capacity of fluoride from water. It was found that theremoval of fluoride was high at natural pH (7) and was improved for increasing contact time and adsorbent dosage. Themaximum sorption of the resin was 13.7 mg/g according to the Langmuir model, namely higher than the values reported in t...
Autori: Mohammad Taghi Samadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26273

AbstractLithuania is planning to construct a new nuclear power plant nearby the closed one. The possible radioactive pollution can be one of the main problems in its surroundings. Results of investigations of the gamma radiation equivalent dose rate (EDR) at new nuclear power plant sites are presented. Main factors influencing the level of the EDR are identified and evaluated, and geological structure of alternative sites is discussed. The gamma spectrometry data showed that the dominant influen...
Autori: Raselė Girgždienė, Vigilija Cidzikienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26277

AbstractWorldwide, waste materials are produced as a by-product of industrial manufacturing and placed in storage areas. One of the waste materials is filter cake (FC). FC is formed during the infiltration of cooling water in steel factories. The main aim of this research is determination of optimum usage of FC in the production of impermeable layer on ground by using fuzzy model approach. Because of this, in the study, FC as a waste material was hardened with cement and an impermeable layer was...
Autori: Ä°lker Bekir Topďż˝u, Murat Karacasu, Tayfun Uygunoğlu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26288

AbstractSecondary aluminium production inherently generates significant amounts of slag of variate composition and including dangerous compounds. Consequently, a care treatment of the resulted slag is imperatively necessary for preventing the environment pollution and for recovering valuable materials even if present in low amounts. The aluminium recovering procedure is based on a chemical and hydrometallurgical slag treatment, leading to the technical grade aluminium sulphate (AS), possible to ...
Autori: Carmen Tociu, Cristina Maria, Elena Diacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26295

AbstractThe road infrastructure has a major environmental impact by covering important land surfaces and consuming enormous amounts of raw materials for construction and maintenance. The impact of transport pavements needs to be considered from the design stage and to be examined during the whole life cycle of the infrastructure: raw materials extraction and initial transformation, manufacturing, placement on site, exploitation, maintenance, and demolition. This paper evaluates the impact of asp...
Autori: Isabela Maria Simion, Laura Dumitrescu, Maria Gavrilescu, , Radu Andrei, Sebastian George Maxineasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26297

AbstractThis paper discusses some environmental problems caused by the mine waste from the Copper Mine Bor in Serbia. The CopperMine Bor and the Smelter generated about 2x109 tones of waste materials, located in the vicinity of the Bor. They cover mining,flotation tailings and smelting slag wastes. The existing mine waste have been formed during a hundred-year-old of mining andmetallurgical activities in Bor. Also, new quantities of wastes (up to ten thousand tones) have been produced daily by u...
Autori: Jovica M. Sokolović, Novica Milosević, Rodoljub D. Stanojlović
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26334

AbstractMonitoring an unstable slope is quite important for environmental safety. Based on our previous studies, this paper presents athird-generation distributed optical fibre transducer. The operating mechanism of this novel transducer was analysed for itsresponse to a single concentrated and uniform load, and a theoretical study was conducted on the elongation of the bottomsurfacefibres of a bending resistance model at the phases of linear elasticity and total cross-section cut-off stage. A b...
Autori: Bang Liu, Dong-Yan Liu, Hu Luo, Jing-Cheng Liu, Qiao-Ying Yuan, Yun-Ju Luo, Zheng-Wei Zhu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26348

AbstractFor efficient, economical and environmentally disposing the waste rock underground, based on principles of waste directbackfilling in fully mechanized coal mining, this paper carries out a field test in 6304-1 working face of Jining No.3 Coal Mine.We first design a waste rock direct underground processing system, including screening-crushing system, transportation system,transfer system, stope backfilling system and coal mining system. Then optimize the waste backfilling and coal miningt...
Autori: Jixiong Zhang, Qiang Zhang, Xu Zhao, Yanli Huang, Zhan Liu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26383

AbstractStatic electricity represents one of the potential ignition sources for the explosive atmospheres. The test methods for materials, ingeneral, and especially the test methods for textile fabrics for assessment of the protective performances in static electricity, haveknown a permanent evolution alongside newly developed electrostatically dissipative materials. Within the National Institute ofResearch and Development for Safety in Mines and Explosion Protection (INCD-INSEMEX) new testing s...
Autori: Mihaela Părăian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26405

AbstractIn industrial plants many types of combustible dusts are generated, processed, handled and stored. When ignited, they can burnrapidly and with a considerable explosion force, when mixed with air in proper proportions. This is the reason why adequateprecautions have to be adopted, to ensure all equipment is appropriately protected so that the ignition likelihood of the explosiveatmosphere is diminished.Explosion preventing and protection precautions aim to stop explosion occurrence, by el...
Autori: Adrian Jurca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26406

AbstractResearches aim to develop new knowledge in the metal cutting field, using a relatively new technique with a low number ofapplications nationwide, namely the flexible explosive charge with cumulative effect for fast and precise cutting of metals. Theprocedure of cutting with explosives is a process that involves using and handling materials in their solid phase.This procedure isespecially applied in cases where materials are mostly metals and it uses a directed and controlled cumulative e...
Autori: Ilie Ciprian Jitea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26410

AbstractThe supply of building materials in the city of Kinshasa is one of the major challenges for sustainable development andespecially at this time when the authorities are committed to rebuild the country and to rehabilitate the basic infrastructure,mobilization and knowledge of these materials appears to be of paramount importance. In this context, the Kinshasa morphologywill change day by day because of the operations of construction materials extraction, to meet the needs of the populatio...
Autori: Holenu Holy Mangenda
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26428

AbstractRolling bearings are one of the most commonly mechanical elements used in the construction of dynamic equipment. Thiselement can be considerate as a noise source as a result of relative motion of the components from their construction: rings,rolling elements and cage. The noise level increase with the increase of the roller bearings wear. By analyzing of the rollerbearings wear level, which appear due to the component failure, it can be determine the deterioration stage and their remaini...
Autori: Dumitru-Cristinel Nadabaica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26430

AbstractThe failure of process equipment due to the impact of natural hazards, the so-called Natech events, have generated severalindustrial accidents, such as Fukushima, Japan - 2011, Ichihara, Japan - 2011, Tupras, Turkey - 1999, Northridge, US - 1994 etc.,causing the release of large quantities of hazardous materials in the environment. Earthquakes occupy a leading position in thelist of natural hazards with Natech potential, causing serious damage and the loss of containment in process equip...
Autori: Augusta Diana Gheorghiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26460

AbstractThe researches were initiated in the context emphasized by the competition having the idea of profit at its base, and sustainabledevelopment, which imposes limitations through different regulations and standards which would involve supplementary costs.The research highlights the main trends in plastic product design in conditions of sustainable development of society. Plasticshave an important role in the configuration of the new products just in the phase of conception. Having in mind t...
Autori: Petrica Corabieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26472

AbstractNano-Ag electrodeposited on carbon nanotubes-epoxy and carbon nanofibers-epoxy composites electrode materials as Ag-CNTand Ag-CNF electrodes were tested for simultaneous detection of arsenic (III) and lead (II) from aqueous solution. Theelectrochemical behaviour of As(III) and Pb(II) on both composite electrode offered useful detection information and Ag-CNFexhibited better electroanalytical performance. The detection scheme using Ag-CNF for simultaneous detection of As(III) andPb(II) wa...
Autori: Anamaria Baciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26511

AbstractThe impact of modern structures on the environment during the building process and actual life-cycle becomes more and more ofa problem and needs to be minimized using unconventional architectural and building solutions, materials and overallacknowledgement of the whole concept.This study has the task of determining the feasibility of a modern earth sheltered house solution by comparing its thermalperformances and environmental impact to a conventional above-ground building solution. Alth...
Autori: Horia Tundrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26517

AbstractWater recycling and reuse, answering the needs of creating cleaner water resources, need to be closely related with water resourcemanagement and technologies. Current municipal wastewater treatment plants are capable to control conventional pollutants(carbonaceous compounds, particulate matter, nutrients). Priority organic compounds, like polyaromatic hydrocarbons,polychlorinated biphenyls, endocrine disrupting chemicals, personal care products, pesticides etc., may escape the treatment ...
Autori: Andreea Chelba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26521

AbstractThe building stock in Eastern European countries varies greatly in terms of the thermal properties of the materials used. Duringrecent decades, the requirements related to building energy performance have been changed. Nevertheless, the number of newlybuilt buildings has decreased in recent years, so there are few buildings that fulfill the strictest requirements that were recentlyintroduced. Several national programs have been started to help owners improve the energy use of their build...
Autori: Béla Bodó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26529

AbstractThe thermal and water insulation of buildings is extremely important. Currently, the most applied insulation materials in thebuilding sector are plastic foams and fibrous materials. Different types of polystyrene materials are used as water and thermalinsulators, e.g., expanded polystyrene (EPS) and extruded polystyrene (XPS). The differences between the different polystyrenematerials is found in their manufacturing processes and thus in their microstructure. Our research focuses on the ...
Autori: Ákos Lakatos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26546

AbstractIn our study, we examined the annual carbon footprint and energy balance of a Hungarian biogas power plant with a poweroutput of 0.637 MW in 2013, with reference to the complete life cycle of the biogas production. The life cycle analysis (LCA)considered the emissions of greenhouse gases (GHG) during the production of feedstock and its transportation into the powerplant, during the operation of the factory and during the process of rendering the discarded waste materials harmless. Weesta...
Autori: György Szabó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26548

AbstractThere are several environmental issues in urban areas that are caused by the unintentional consequences of past activities. One ofthese issues is the wide application of asbestos cement in roofing materials in the 2nd half of the 1900s. In this study, our goal wasto identify different roof types and to determine those with asbestos components using high-ground (1 m) and spectral (126bands) resolution airborne hyperspectral imagery (AISA Eagle II) and several classification approaches. In...
Autori: Szilárd Szabó
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26549

AbstractCurrently, thermal insulation of buildings is required from both an energy savings perspective and a money savings perspective.Insulation is primarily installed on the outer surface of the buildings. Weather and other circumstances can produce humidity thatcan act on the building structure, e.g., by changing its heat capacity, the heat transfer coefficient and/or other factors. As a result,it is important to measure the sorption behaviors of the construction materials. To perform sorptio...
Autori: Ferenc Szodrai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26550

AbstractEnd-of-life tires are waste materials that pollute landscapes when they are disposed of in tire dumps. However, its life cycle is notfinished when they are scrapped. The rubber of end-of-life tires could be used for new purposes as construction material in roadrehabilitation. A gap-graded mix characterization was carried out in this work by means of laboratory and field performancetests. The mixture has a high content of crumb rubber (CR) by weight of bitumen. Crumb Rubber was added to t...
Autori: Victor F. Vázquez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26577

Abstract Biodegradable chitosan was used to cover fertilizer granules with an inert, impermeable layer in order to obtain a material with controlled release properties. The process was performed in a laboratory drum granulator. Prepared materials were characterized with available analytical methods (XRD, optical microscopy). The layer thickness of the obtained materials was in the range of 0.047 – 0.5425 mm. The degree of nutrients' release (0.64-0.965 within five hours) were deter...
Autori: Krzysztof Lubkowski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26583

Abstract This article covers the investigation of the catalyst waste (T.R.M 1 and T.R.M 2) produced in the reactor of oil catalytic cracking. The analysis of this waste was carried out. The properties of T.R.M 1 and T.R.M 2 were investigated and determined, the mineralogical analysis of catalyst waste was implemented, the analysis of thermal effects during the burning was performed. Catalyst waste materials investigated were used in a ceramic system (from 7  to 20  of the ove...
Autori: Olga Kizinievič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26600

Abstract During the creation of a product, the majority of the enterprises still apply a linear approach. This approach has been imposed by the organization way of the company and by the informational flow between the different departments. In the present time different models of integrated engineering oppose to the sequential organization. These models permit the simultaneity of the activities deploying or at least their partial overlap. The activities overlap can be imagined eliminating fi...
Autori: Petrică Corăbieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26633

Abstract The interest in waterborne paints amelioration increased lately due to the toxicological effect of certain ingredients on human health, the restrictive environmental legislation and the depletion and escalation in price of raw materials. Research efforts in formulating waterborne paints are directed to insure low volatile organic compounds (VOCs) emission while maintaining and even improving their properties. This paper presents a waterborne paint formulation process. The required ...
Autori: Andrei Ionut Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26639

Abstract Copper nanoparticles were successfully synthesized on polyether-functionalized mesoporous silica to investigate the effect of metal loading (10, 25 and 35 wt. % Cu) on their structural and catalytic properties. The oxide forms of these nanocomposite materials were thoroughly characterized by nitrogen physisorption, SAXS, WAXS, TEM, EDXS, and TPR, whereas the metallic forms were analysed by N2O chemisorption. The results indicated that the mesostructured SBA-15-like hybrids favoured ...
Autori: Constantin Rudolf
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26653

Abstract This paper presents the results obtained using the prehydrolysis treatments of rapeseed stalks depending on regime and the catalyst. The vegetal materials were subjected under different temperature conditions and then characterized for the yield reducing substances. The differences between samples have been established by using FTIR and depend on the successive hydrolytic treatments of dynamic and static regime in the presence of various catalysts. The experimental data show that th...
Autori: Corina Măluţan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26654

Abstract A new catalytic mixture of nanosized dioxide (CeO2) and zinc oxide (ZnO) powders have been synthesized by surfactant-assisted solvo-thermal route, characterized and evaluated for photocatalytic activity. The prepared catalysts were characterized by TG, XRD, SEM and EDAX methods. SEM analysis showed that the catalyst particles have spheroidal shape and their sizes range from 50 to 80 nm, organised as uniform distributed aggregates with large surface area, leading to the existence of ...
Autori: Gabriela Antoaneta Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26655

Abstract Sites contaminated with hazardous materials pose serious risks to human health and ecological environments. Quantitative health risk assessment is a site-specific complex procedure requiring evaluation of all possible pathways. Several studies have focused on the evaluation of heavy metals or organic pollutants; however, only few studies focused on the evaluation of diverse pollutants such as heavy metals and organics. In this study, the health risk of heavy metals and organic pollu...
Autori: Hou Wei
ISSN: 1
http://www.ecozone.ro/reviste.php?RID=26663

Abstract The variation of the content of 12 phenolic compounds from 5 months aged Cabernet Sauvignon and Merlot wine samples treated with siliceous and aluminosiliceous porous materials was analysed through a HPLC method. The standard physical-chemical analyses (alcoholic concentration, total acidity, volatile acidity, relative density, reductive sugars, total dry extract, non-reductive extract, free SO2, total SO2, pH) were registered. The used nanomaterials: SBA-15, Al-MCM-41, KIT-6 were s...
Autori: Camelia Elena Luchian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26667

Abstract In the current study, the structural and adsorptive properties of the micro crystalline cellulose beads, Cellets 200 and 350, as well as the possibility to use them as adsorbents for removal of reactive dye Brilliant Red HE-3B and cationic dye Methylene Blue from aqueous solutions have been investigated. Batch experiments were conducted to study the effect of adsorbent particles size (200-500 μm), initial solution pH (1-11), adsorbent dose, dye concentration, temperature (2-450C)...
Autori: Daniela Suteu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26668

Abstract Drinking water treatment using activated carbon (AC) decontamination offers effective methods for removing some organic compounds, tastes and odors, but it is not so efficient for metals, nitrates, microbial contaminants and other organic and inorganic contaminants. In the last years, nanotechnologies introduced several types of nanomaterials for organic, inorganic and biological removal of contaminants in drinking water, such as: sorption, filtrations and catalytic processes. In th...
Autori: Elena Radu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26671

Abstract Magnetic contamination is considered more and more as a challenging issue related to biosphere pollution with magnetic materials originating in natural and artificial sources (volcanic eruptions and respectively industrial activities that contributed to iron and other metal compounds spreading in air, water and soil). Aiming to study the impact of magnetic metal ions such as iron and cobalt on the metabolism of some environmental microorganisms, in this paper an experimental simulat...
Autori: Lacramioara Oprica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26675

Abstract Nanoparticles are very interesting materials due to their properties which can be different than those of the bulk and they have many applications in various domains, like electronic, catalytic or biomedical. Gold is one of the most studied materials and is used in many applications that will have the human being as recipient, that’s why gold nanoparticles should be obtained as environmentally friendly as possible. In this work, particles of around 50 nm were obtained in a so ...
Autori: Razvan State
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26676

Abstract As natural landscapes are increasingly replaced by impervious surface materials associated with urbanization, urban areas tend to experience higher surface temperatures when compared to rural areas, which is known as the urban heat island (UHI) effect. In this study the impact of urbanization on land surface temperature (LST) and the UHI effect were examined based on two Landsat Thematic Mapper (TM) imageries of 1987 and 2007. Results show that Wuhan experienced rapid urban expansio...
Autori: Qijiao Xie
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26684

Abstract Bioplastics are biobased materials, usually easy biodegradable, derived from renewable resources. Evolution of bioplastics production is related to: bio starch and starch mixtures (74.5%); bioplastic products from fermentation (13%), bioplastic from petrochemicals materials (12.5%). They are seen as a viable solution to avoid some environmental impacts caused by the use of fossil-based conventional plastics. In this context, the general objectives of this study entail the analysis a...
Autori: Elena-Diana Comaniţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26688

Abstract The bismuth oxide (Bi2O3) nanoparticles are easily synthesized from a solution of bismuth nitrate pentahydrate (Bi(NO3)3·5H2O) in ethylene glycol by a hydrolysis solvothermal route at temperatures of 120-150C. X-ray diffraction, scanning electron microscopy and UV-visible diffuse reflectance spectroscopy are used to characterize the products. The results show that the reaction temperature, the reaction duration and the initial solution concentration play important rol...
Autori: Xiaowen Luan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26689

Abstract The main purpose of this research was to study the biodegradation ability of atrazine by using Arthrobacter sp. as free and immobilized cells of the strain DNS10, under several important environmental factors such as temperature, pH, salinity, substrate concentration. Furthermore, this paper objective was also to assess the process considering the immobilization under extreme conditions, such as high salinity and high atrazine concentration. DNS10 was immobilized on a sodium alginat...
Autori: Zhang Ying
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26702

Abstract Adsorption has proved to be an excellent way to treat industrial wastewater, due to its significant advantages like easy availability, inexpensive, ease of operation and highly efficient, compared to conventional expensive adsorbents like activated charcoal, alumina etc. The present investigation focused on utilization of Mangifera indica seed shell substrate for the removal of toxic heavy metals like Fe(II) and Mn(II) from wastewater. Mangifera indica seed shell substrate as an eff...
Autori: Tikaram D. Kose
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26713

Abstract Impact damage is considered the primary cause of in-service delamination in composite materials and promotes significant reduction in residual strength. Non-destructive techniques (NDT) include several methods able to detect the shape and the size of the interior damages without destruction of the structure or component, which is economically advantageous. The aim of this paper is to evaluate the properties after low velocity impacts using an experimental-numerical procedure based o...
Autori: Ana Martins Amaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26726

Abstract Large quantities of snail and clam shells are left as waste material when their meat is used as food for people. It has been a big problem that how to treat these wastes and usually these are land filled as wastes. In the present paper, these shells are studied as recycling resource for phosphate removal from solutions. Laboratory-scale batch experiments were conducted to evaluate the efficiency of snail and clam shells in removing phosphate from aqueous solutions. Major factors inv...
Autori: Ji Bing Xiong
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26727

Abstract This paper aims to analyze the characteristic of Road deposited sediment (RDS) using West Chang Tan highway, Hunan, China as a study site. RDS samples were collected at five representative highway sites and the particle size distribution was generally less than 150μm. Particles with the grain size (<150μm) had high metal concentrations among all sampling sites (unit: mg/kg): Cu 74-178, Zn 309-2737, Pb 601-1160, Cd 9.8-44.5. There is significant spatial variability between t...
Autori: Yunbo Zhai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26728

Abstract Chitosan and keratin were tested as low cost biosorbents to remove phenol from water solutions at variable temperature (20- 50°C), initial phenol concentration (10-90 mg L-1) and pH (5.0-10.0), and fixed biosorbent dosage (10 g L-1). The pseudo-second order kinetic model exhibited the best fit to the experimental data and allowed estimating theoretical values of sorption capacity of 4.51 mg g-1 with keratin and 2.87 mg g-1 with chitosan. Equilibrium isotherms, described at best ...
Autori: Attilio Converti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26743

Abstract In order to remove various radionuclides (Tl+, Sr2+and La3+) from wastewaters we used three solid supports of (styrenedivinylbenzene) grafted with different pendant groups (1-triphenylphosphonium; 2-izo-propylphosphonate; 3- aminoethylaminomethyl). The solid supports with different pendant groups were impregnated with ionic liquid (Cyphos IL-101- trihexyltetradecylphosphonium chloride). IR-spectra, EDX-ray and SEM image were used to characterize the adsorbent obtained after the imp...
Autori: Mihaela Ciopec
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26749

Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

Abstract The paper presents the most economical and less polluting retaining wall system, calculated for the same site, having few different common heights used in design. The paper will highlight the importance of an environmentally friendly solution, but also the most economical solution, which should be the main criteria in the design. Two of the tools used in environmental life cycle assessments (LCA) are the carbon footprint and the energy footprint. The quantification of the carbon and...
Autori: Vasile Farcas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26753

Abstract Waste management does not try to dispose waste anymore but is searching for the best solution to manage valuable and scarce resources and reduce the negative impact on the environment. Preoccupation in Germany with regard to optimization of waste recuperation and valorization increases and separate collection systems for different waste fractions are taken into consideration. Within this study a pilot project was set up and its results are presented below. The investigation evaluate...
Autori: Mihaela Berechet
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26758

Abstract This paper reports the activity, promoted by the Italian agency for new technologies, energy and sustainable economic development (ENEA), in the framework of the project for the development and implementation of the first Italian Platform for Industrial Symbiosis implemented in Sicily (2011-2015). The goals of the project were: to provide a methodology and an instrument for industrial symbiosis implementation at regional scale, to implement a IS Platform as a support to SMEs to ind...
Autori: Laura Cutaia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26774

Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

Abstract The increasing diffusion of Hi-tech complex products has raised the attention of scientific community towards their End of Life (EoL) treatment, both in terms of assuring an appropriate disposal, to avoid the dispersion of harmful substances, and at the aim of their exploitation as valuable sources of raw materials. Within this study an integrated approach for waste electrical and electronic equipment (WEEE) end of life treatment is proposed based on the integration of hydrometallur...
Autori: Claudia Brunori
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26777

Abstract The recovery of raw materials from waste represents a sustainable growth opportunity for those countries with limited mineral resources availability. A case study for an integrated approach to recover raw materials from spent fluorescent lamps is presented, with the aim of improving the current treatments which are only able to recover the glass fraction. In particular a hydrometallurgical process was developed to obtain valuable metals such antimony, copper, and rare earths (yttriu...
Autori: Roberta De Carolis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26782

Abstract New and end of life tires have been pyrolyzed in an innovative pilot plant that processes whole tires, thus saving the energy costs of shredding while allowing energy and materials recovery. Furthermore, the presence of a hydraulic guard guarantees high process safety. Several tests at different temperatures have been performed and the collected solid, liquid and gaseous products have been quantified and characterized. The influence of the maximum process temperature on yields and c...
Autori: Loris Giorgini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26783

Abstract The European Commission has introduced a whole range of policies and initiatives to promote the product eco-innovation and the environmental impacts reductions. One of the key topic for the reduction of the environmental impacts is the waste recycling and reuse (turning waste into useful resources). A teamwork of Politecnico di Milano has developed a research work, still ongoing and continuously updated, called “The usefulness of the useless. Cross-sectorial evaluation of wast...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26788

Abstract Hydrolysates of Arundo donax, a crop offering high productivity in contaminated or salinized soils with no inputs of irrigation and agrochemicals, were used in a discontinuous fermenter to grow the oleaginous yeast Lipomyces starkey, to obtain microbial oils potentially useful for the production of 2nd-generation biodiesel. A mixture of fermentable sugars was obtained by steam-explosion and subsequent enzymatic hydrolysis of the lignocellulosic materials. The concentration of Ni2+ ...
Autori: Domenico Pirozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26789

Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

Abstract Recently several innovative suggestions on how industrial wastes can be utilised in new products have been presented in literature, e.g. as filler or additives in concrete, incorporated in ceramic materials to produce glass-ceramics and pavement construction. In this work, metallurgical materials from secondary aluminium scrap processing and glass waste derived from treatments of packaging and fluorescent lamps were considered for fabrication of new ceramic materials using powder te...
Autori: Rosa Taurino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26794

Abstract To make sustainability transitions happen, it is crucial not only to have strategic planning processes committed by the top management, but also to encourage community engagement, approaching and promoting a bottom-up process. In the specific case of a University Campus, that means the involvement of the students not only as consumers, but with a leading role in the sustainability process. DICAM department of University of Bologna has recently started the implementation of some prac...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26798

Abstract Today companies are facing more and more with pressures for reducing carbon emissions, as a consequence of the development of the green movement and because materials continue to generate very large impacts on carbon emissions. In this context, supplier selection is one of the most vital components in purchasing management, which becomes more and more important. However, most of the earlier researchers have not paid enough attention to supplier selection in low carbon supply chain. ...
Autori: Wei Pan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26799

Abstract The recycling and later use of construction and demolition waste (C&D waste) as construction materials present a strategic inconvenience for many stakeholders involved in the sustainable construction. In some countries, the recycling percentage of C&D waste is around 80% of the C&D generated. However, in other countries this percentage is much lower. This complexity requires a better understanding of the recycling dynamic. In the specific case of Spain, the National Inte...
Autori: Nuria Calvo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26817

Abstract It has been shown that the scale of damage in buildings with steel reinforcement, due to direct lightning strikes, is insignificantly small compared to lightning effects on buildings with no such steel reinforcement. Observed small-scale damages are also confined to points of strike; hence the only risk for occupants and properties is injury or damage caused by falling materials. A large number of such cases have been observed in Sri Lanka and Malaysia. All damaged structures, obser...
Autori: Chandima Gomes
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26821

Abstract In rural areas of Romania and other developing countries wounds and dermal affections represent one of the five most common reasons for people seeking medical care. The use of traditional medicines to treat many of these conditions has received little research or policy attention. The present work addresses the discovery of non-toxic treatments for dermal affections, and aims to prepare – based an environmentally friendly technology, and characterize hydrogels based on gelatin...
Autori: Călin Vasile Andriţoiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26842

Abstract A large number of energy inefficient buildings were constructed without taking into account the principles of green building, which requires efficient utilization of local resources. In this work hemp and peat fibres were used in order to produce effective ecological thermal insulating material. Tests were carried out using short dishevelled hemp and chopped peat fibres. Effective composites from local renewable resources were produced. Macro- and microstructures of composites as we...
Autori: Rūta Stapulionienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26844

Abstract The amount of bottom ash produced in Italy from municipal solid waste incinerators is estimated at over a million tons per year. Up to now, it has almost all been disposed of in landfills. Therefore, large profit margins, from both the economic and environmental standpoint, can be expected from the recovery of this material, or at least from a fraction of it. In this study, a rapid procedure for the recovery of different bottom ash fractions based on mechanical sorting and aging was...
Autori: Ivano Vassura
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26853

Abstract An experimental study on the hydrodynamics of fixed, fluidized and spouted granular bed was performed. With this aim two commercial adsorbent materials and a composite material obtained by impregnation with a hygroscopic inorganic salt were employed. The fluid phase consisted in dry air. The obtained results highlight the influence of grain size, material density and roughness over pressure drop and gas velocity. Increasing grain size leads to decreasing pressure drop and increasing...
Autori: Ioan Solomon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26854

Abstract In the present study, several selected formulations based on recycled (rPP) or virgin polyolefins (vPP) and lignocelluloses were prepared and subjected to microorganism attack. Biodegradation tests were performed with microbial strains belonging to fungal genera, like Aspergillus, Penicillium and Fusarium. The initiation of biodegradation was demonstrated by Scanning Electron Microscope (SEM) micrographs showing the colonization of surface samples by microbial strains. The crystalli...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26879

Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

Abstract Poly(vinyl chloride) (PVC) is the most widely used material for the production of medical devices such as intravenous fluid bags and tubing, enteral feeding, dialysis equipment and catheters. Despite of their numerous advantages, the plastic medical devices are non biodegradable and prone to microbial colonization causing biofilm associated infections which are difficult to treat and tend to chronicisation. A possible solution to surpass these limitations could be the fabrication of...
Autori: Petruța Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26894

Abstract The CoCrMo alloys have been widely used in artificial knee or hip joints. It is well known that these materials have a good corrosion resistance and acceptable biocompatibility properties. Zirconia as a ceramic biomaterial facilitates the osteoconductivity and tissue osteogenetic capacity in new bone formation around implant. Linear polarization and electrochemical impedance spectroscopy (EIS) were employed to characterize the electrochemical behavior of plasma sprayed yttrium oxid...
Autori: Manuela Romaş
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26896

Abstract In Palestine, environmental problems associated with industrial solid waste (ISW) have increased significantly in recent years. This paper presents survey results on current industrial solid waste management (ISWM) practices in the governorates of Nablus and Ramallah & Al-Bireh, Palestine. Solid waste generated from industries was quantified, characterized and discussed in terms of generation rate, storage, reuse/recycling, transportation, and final disposal. An attempt was made...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26903

Abstract The objective of this study is to manufacture a geopolymer by replacing part of the metakaolinite by calcined oil-contaminated clay (OCC) and investigate its properties. The effects of the calcination temperature, the mix design of the alkali activator, and the degree of calcined OCC replacement on the properties of the geopolymer were studied. Evaluation of pozzolanic activity and compressive strength as well as micro structure observation by SEM and XRD were performed in this stud...
Autori: Huan-Lin Luo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26905

Abstract The current industrial trend is toward the development of sustainable technologies, and environmentally-friendly chemicals that might be used to enhance the drilling activities. This is due to the fact that petroleum industry is regarded as one of the hazardous and risky industries. Unfortunately, the majority of the toxic materials that are used in the formulation of drilling mud are employed to improve the quality and functions of drilling fluid. Oil based muds (OBMs) from hydroca...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26907

Abstract Establishing a management system for collecting and disposing the solid waste materials is of great importance in urban areas. Belgrade, the capital city of Serbia, is at its initial phase of managing this problem. Currently, landfill disposal is the main option for dealing with rapidly growing amounts of waste. This paper’s research goal is to estimate the landfill gas quantity at Belgrade’s only landfill site Vinca, and to estimate the potential for collection and util...
Autori: Vesna Alivojvodic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26923

Water scarcity, the degradation of freshwater resources, and wastewater pollution are reaching crisis levels, especially in arid regions of the world. The reuse of wastewater was investigated by using intermittent media infiltration (IMI) to evaluate fecal coliform (FC) removal efficiency. Twelve IMI columns were packed with soil and natural filtering materials (sand, zeolite, vermicompost and charcoal) at percentages of 25, 50 and 75. The municipal wastewater was treated for the FC analysis ...
Autori: Sasirot Khamkure
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26935

One way to improve the performance of non-thermal plasma (NTP) reactor for volatile organic compound decomposition is by the introduction of ferroelectric materials into the discharge zone of NTP. This paper is a review of the breakthroughs and the current status of the applications of this technology for the abatement of volatile organic compounds (VOCs). It covers the process of energy generation in NTP, VOCs decomposition processes and the effects of critical factors such as type of packed...
Autori: Abdullahi Mohammed Evuti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26948

Various plants were investigated here as bioindicators for control of the environment. Grass, moss and leaves of maple, birch and oak from different locations, i.e., mining, chemical industrial sites and open green area in a small industrial town in the southwestern Poland (Zloty Stok) were examined. Concentrations of As, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb, Se, Sr, Ti, V and Zn were measured by the ICP-OES and CVG-ICP-OES techniques. Infrared spectroscopy (FT-IR) was used to inves...
Autori: Lukasz Zarebski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26951

This work establishes a mapping procedure to determine the risk of susceptibility to hillside movements (landslides) that can be applied to any territory by means of algebraic mapping of the passive or determining factors that influence risk. On the one hand, derivative morphometric mappings obtained from a Digital Terrain Model that notably influence the genesis of active processes have been generated; these mappings include gradient mapping, aspect mapping and type of curvature mapping. On ...
Autori: Antonio Miguel Martínez-Grańa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26954

To explore the main sources and pathways of heavy metals entering fruits and the corresponding countermeasures, a field survey was conducted in Pujiang County, Zhejiang Province, China. The results showed that heavy metals in fruits came mainly from the use of foliar fertilizers, ripening agents, fungicides, pesticides, and other sprayed materials during the flowering and ripening stages. Therefore, a government program should be established to improve monitoring of agricultural products ente...
Autori: Bin Fang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26955

Air change rates and ventilation of a room was determined by CO Tracer Decay Technique. The tracer was generated by burning bulk amount of mosquito coils, an easy and low cost method of CO generation. The temporal decay in CO concentration in indoor air under closed and open room conditions were determined by collecting indoor air periodically at a few minutes interval in Tedler Bags and analyzing the same for CO. The air changes rate per hour (ACH) was calculated from the temporal decline of...
Autori: Deepanjan Majumdar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26965

Waste recycling in steel industry by turning grain-size and powdery waste into pellets is a must now more than ever for economical motivation, in order to save raw materials and also for ecological reasons, as it leads to a cut down in the quantity of dumped waste. Industrial practice offers processors various technologies of waste recycling (agglomeration, briquetting, pelleting, mechanical mixture). The optimal variant should be chosen according to waste type, its content of useful elements...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26968

Every year a lot of hectares of forest are burn in Europe, especially in the south part of Europe, where the climate is hot and dry during the summer. Last decades, with climate change, this part of the Europe becomes dryer and increase of the field fires is observed. The same problems arise in northern America, Australia and other dry regions. A model field fire spread can have several applications. The prevision of the fire front can help the fireman to optimize their work, and to reduce th...
Autori: Stefka Fidanova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26973

Environmental threats posed in the environment by plastic production and plastic wastes continue to be a major problem today, closely connected with the increase of plastics consumption by the population. Moreover, little efforts are involved in some parts of the world associated to plastic waste collection, recycling and reuse. Considering all these prerequisites, the identification and discussion of risks generated by plastic production and waste in the environment are performed in this pap...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26990

In past ten years area of green technologies and materials was the most growing industry sector in the world. It is related with global warming, air pollution and energy saving. Building sector intensively increased air pollution and is related with high energy consumptions. The use of renewable or recyclable materials can reduce these problems. In current work, thermal insulating materials from hemp shives and corn starch were investigated. Structures of various shives fractions were analyz...
Autori: Giedrius Balčiūnas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26992

High contents of colloidal and organic materials in municipal wastewater sludge cause problems in the process of dewatering. The filtering efficiency can be improved by chemical conditioning, but the effectiveness of mechanical dewatering is limited because flocculated sludge is highly compressible. Physical conditioners such as bagasse can be used to facilitate mechanical dewatering. This paper describes the use of bagasse pith (cane sugar waste fiber) to improve the dewatering process of mu...
Autori: Nematallah Jaafarzadeh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26995

The release of nitrogen compounds into the environment is a major concern worldwide. Different studies howed that recycled materials have a high removal capacity for pollutants. Bentonite and its major clay minerals, smectites clays are common bleaching agents used for oil refinery bleaching and known as bleaching earth (BE). In this study regeneration of spent bleaching earth (SBE) acquired from the vegetable oil industry was surveyed via different methods and the regenerated spent bleaching...
Autori: Mohammad Malakootian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27000

Production and utilization of engineered nanoparticles (ENPs), which are smart materials with ability of sensing and destroying chemical contaminants, is growing rapidly. However, these materials seem to have some ecological and health adverse effects. Hence, the main goal of this review study is to give a brief description about the recent developments of the commercial available engineered nano particles in the environmental remediation and also to note the current state of findings about t...
Autori: Mohammadreza Kamali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27017

This paper presents the results of measurements related to the activity concentrations of 226Ra, 232Th and 40K in autoclaved aerated concrete (AAC) used as building materials for various constructions in Romania. Radiation index (I) and the hazard index (HI) were estimated to assess the risk arising from the usage of AAC materials. Our study considered various AAC samples produced by different companies, in 2015. The activity concentrations of 226Ra, 232Th and 40K were measured using by a gam...
Autori: Dorina Nicolina Isopescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27018

...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27020

A biodegradable iron based alloy was obtained through classical melting method using a furnace with controlled atmosphere. The metallic material was obtained from high purity materials using a proper obtaining method. The material is proposed as an alternative to magnesium alloys that have a very fast degradation period for applications with longer healing periods (more than 3 and between 12 to 18 months). The material was analyzed using scanning electron microscopy (SEM) and X-ray dispersive...
Autori: Sergiu Stanciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27023

Maghemite nanoparticles (γ-Fe2O3) were synthesized in order to be used as magnetic adsorbent for two heavy metals, Pb(II) and Zn(II), from aqueous solutions. γ-Fe2O3 was prepared from magnetite nanoparticles and was tested for single and binary aqueous solutions. Efficiency removal (%) for single solutions appears only after 10 minutes and was higher than 80%. In case of binary solutions, same results regarding efficiency removal were registered after 60 minutes, being almost 90% ...
Autori: Ecaterina Matei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27029

Removal of Cd(II) from aqueous streams is of special concern because of its very high toxicity and persistent nature. The sorbents based on natural and waste materials have very promising performances in the treatment of Cd(II) contaminated waters. Very few reviews are available that provide valuable information on the various aspects of the utilization of natural and waste materials for Cd(II) metal ions removal. In this context, this review examines a wide range of materials as green sorben...
Autori: Lavinia Tofan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27033

This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

In the current context, when studies regarding the planet’s ability to sustain the human species consumption present more and more grim scenarios, it is required, more than ever, to consider sustainable development as a main priority for development strategies worldwide. In this sense, reducing the negative environmental impact of building materials and lowering energy consumption in buildings exploitation becomes the main axis for most of the new tendencies in architecture and civil e...
Autori: Marian Pruteanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27040

Renewable resources, biopolymers and bio-based materials are keywords of the sustainable development and environmental sustainability concepts. Biopolymers, the green alternatives to fossil fuel based polymers, have already found different feasible applications, from consumer goods to regenerative medicine. Keratin is the biopolymer contained in the skin derivatives and appendages and is one of the the proteins with the most sophisticated architecture nature could produce. It is found in huge...
Autori: Hossein Rajabinejad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27043

In this paper both kinetic and thermodynamic parameters of thermochemical transformation of waste tires are evaluated by using thermogravimetric analysis (TGA). For rubber thermochemical decomposition, individually and in the presence of other tires components, some kinetic and thermodynamic parameters such as energy of activation (Ea), frequency factor (A), reaction enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) have been calculated by using the integration method. The e...
Autori: Sana Kordoghli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27060

Three different winter wheat production systems for three European countries (United Kingdom, France and Italy), all with different climatic conditions, soil management and input levels (e.g. tillage, fertilizers, herbicides and pesticides) were analysed from an environmental perspective. The intended applications were the analysis and comparison from a Life Cycle Assessment (LCA) perspective and the identification of the key parameters which have the greatest influence on final results. The ...
Autori: Daniele Cambria
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27102

This study was carried out to monitor the presence of organophosphorus in drainage water (Kafr El-Sheikh (Kotshinar Drainage), Fowa (Fowa Drainge No.11), Metobess (El-Hokss Drainage), Beila (Karakat Drainage), Balteem (Hafeer Shihabeldeen Drainage), Nashart Drainage and El-Hamoul (El-Hamoul Drainage) in Kafr-El-Sheikh Governorate, Egypt. Furthermore, the efficacy of chemical (advanced oxidation processes) and bioremediation (effective microorganisms) for chlorpyrifos removing in drainage wat...
Autori: Aly Derbalah
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27104

The aim of this study is to investigate an innovative way to utilize the char obtained from tyres pyrolysis, in order to realize lightweight materials for building. Pyrolysis residue, mixed with three types of waste glass, has been used as raw material to obtain lightweight materials, exploiting its capability to behave as foaming agent. The results demonstrate that the pyrolysis char is a good foaming agent for the mixtures 50/50 with glassy sand and packaging glass waste, thermal treated at...
Autori: Fernanda Andreola
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27119

We computed the Product Environmental Footprint (PEF) to identify the environmental performance of recycled wool by means of data belonging to a real case study in Italy. First, we analyzed inventory data quality by computing the data quality rating (DQR) index, according to the criteria provided by the PEF protocol. Quality of specific and generic data (selected from the Ecoinvent database) was evaluated as excellent and good, respectively. We then quantified the impacts related to each rele...
Autori: Silvia Bamonti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27121

The aim of the present study was to prepare environmentally friendly silver-based materials using Cornus mas L. fruits extract. For this purpose, silver nanoparticles (Cornus mas-AgNPs) were green synthesized using this plant extract. The bioreduction of silver ions was analyzed by UV–VIS and ATR-FTIR spectroscopic studies. Scanning Electron Microscopy (SEM) analysis revealed the formation of spherical phyto-nanosilver particles with size ranging between 12 and 40 nm. Different amounts ...
Autori: Ioana-Raluca Suica-Bunghez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27139

The effectiveness of thermal insulation materials mostly depends on their thermal conductivity. The low thermal conductivity is predetermined by density, structure, moisture content and temperature of material and, considerably less, by other indices. Loosefill cellulose insulation is allocated to the group of materials, the density of which fluctuates within large limits. This property is related not only to application of cellulose wool in different constructions, but also to technological ...
Autori: Sigitas Vėjelis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27165

In this paper we applied multi-criteria methods of decision in order to establish the best encapsulation material to be used in producing photovoltaic modules. The encapsulation materials play an important role in establishing the PV module performance, especially if referring to their ability to increase their life time. For our study, we have considered the most widely used encapsulation materials available on the market, such as Ethylene-Vinyl Acetate (EVA), Polyvinyl Butyral (PVB), Thermo...
Autori: Gabriela Demian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27169

Against a background of growing concern with environmental issues, resource consumption and waste production in the construction sector, this article presents the results of a study on the implementation of environmental management systems (EMS) certification in Portuguese construction companies. It reports on how construction companies perceive motives, difficulties, benefits and effectiveness of implementing EMS certification. A questionnaire served as the basis for data collection. It was sen...
Autori: Caroline Dominguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27174

Catalysts based on nanocrystalline Mg-Zn ferrites supported on commercial alumina were prepared by in situ sol-gel auto-combustion technique. The as-obtained materials were characterized using Fourier Transform Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), atomic force microscopy (AFM) and Brunauer-Emmett-Teller (BET) specific surface area measurement. These materials were tested as catalysts for hydrogen peroxide decomposition and phenol oxidation reactions. The catalytic activity of ...
Autori: Tamara Slatineanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27192

Life Cycle Assessment (LCA) is a methodology that can be used to evaluate the environmental performance of municipal solid waste management systems (MSWMS). Despite of Waste Directive provisions, this methodology is insufficiently applied as a decision-support method able to identify the best option for the waste management in Romania. In this paper we applied LCA methodology to study of the municipal waste management system of Cluj County, supported by GaBi software. The aim of this study is to...
Autori: Gabriela-Emilia Popiţa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27225

Carbonaceous materials were obtained from waste tyres and their potential application as hydrogen sulphide adsorbents was investigated. The adsorbents were obtained by pyrolysis of waste tyres and physical (CO2) or chemical (KOH) activation at 550 and 800ºC. The effect of modification conditions on the performance of waste tyres based materials as adsorbents of H2S at room temperature in dry and wet conditions was investigated. Sorption capacity of such adsorbents was found to strongly depe...
Autori: Magdalena Hofman-Bieniek
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27263

This study investigates the adsorption of several metals in aqueous solution, by hemp materials (loose fibre and felted fibre). After characterization of the fibre, an extensive study was conducted on the adsorption properties of this material. The experiments were carried out in poly-metallic aqueous solutions containing Al, Co, Cr, Cu, Ni and Zn at a concentration of 1 mg L-1 and 10 mg L-1 each. The pH effect was found to lead to an optimum between pH 4 and 4.5. The kinetics of the adsorption ...
Autori: Justine Bugnet
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27272

In this study was synthesized MCM-41 mesoporous silica by hydrothermal treatment and funtionalized with titanium in order to obtain mesoporous materials with high surfacea area and photocatalytic activity in photodegradation of organic compounds as antibiotics. The functionalization of the synthesized support material was achieved by impregnation from alcoholic solution. The obtained materials (MCM-41) and (Ti-MCM-41) were characterized by X-ray diffraction (XRD), scanning electron microscopy (S...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27274

Paintings signed by Nicolae Grigorescu and Stefan Luchian, exponents of Romanian Modern Art were selected for a technical study on easel painting canvases. Both the physical integrity and the appearance of the artefacts derive mainly from the strength of the canvas and the physical and chemical characteristics of the fibres imparting their response to deterioration. In order to determine a deterioration pattern for canvases subjected to environmental stress, a simulation on flax fibres samples w...
Autori: Maria Geba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27292

Construction industry uses a huge quantity of traditional and modern building materials which generally are produced to satisfy different demands, such as: resistant and safety requirements, friendly with the environment, architectural aspects etc. Researches must solve any requirements related to materials properties and offer a large diversity from which the proper solution must be considered. For improving the mechanical properties of polymer concrete, the use of fibers of different types is ...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27306

Considering the actual environmental issues, the waste management has become a major challenge in Europe and worldwide. Recycling the waste into sustainable products can be an alternative to landfill with positive effects on the costs and environmental pollution. In this respect, in the last years numerous studies and research emphasize the utilization of different type of waste to obtain materials for building applications. The aim of this paper is to assess the effect of using sewage sludge ge...
Autori: Petronela Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27315

The remarkable photocatalytic properties of titanium dioxide and the high adsorption capacity of the mesoporous materials were combined to obtain active photocatalysts for the decomposition of Rhodamine 6G dye. The mesoporous TiO2 was obtained by the controlled hydrolysis-condensation of titanium isopropoxide, using hexadecyl-trimethyl-ammonium bromide as template, followed by calcination to remove the organic matter. Subsequently, this sample was doped with sodium wolframate and platinum. T...
Autori: Doina Lutic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27325

The paper is addressing the issue of returns in products life cycle, focusing on a washing machine as an example of a long-life product with a complex life cycle and numerous options concerning its handling as a return. The objective of the paper is to compare different return product handling scenarios in terms of their economic and environmental aspects. The used materials and methods are the survey results of Polish manufacturing companies, an environmental life cycle assessment and simple co...
Autori: Tomasz Nitkiewicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27338

Deforestation is a vital problem at global level, being one of the main causes of climate change. Volume of wood used in construction, furniture and pulp and paper industries increases year by year. Stopping the decrease of forests surface is of imperative importance from the point of view of sustainability. Pulp and paper industry faces with severe lack of pulpwood and for this reason other raw materials are taken into consideration. Chemical pulp can be partially replaced with recovered paper ...
Autori: Adrian Cătălin Puiţel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27348

In the economic activities related to combustible substances, it may occur possible emissions and explosive atmospheres. Some typical examples include industrial activities in general, firedamp mines and power generation in particular. The aim of this paper is to accentuate hidden aspects regarding ignition sensitivity of moisturized air methane mixtures. Therefore, the first objective of the paper is to emphasize the air humidity as an extra factor needed to be considered in relation to igniti...
Autori: Marius Darie
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27351

The spontaneous combustion of coal or self-oxidation is a phenomenon encountered both in underground mines and coal deposits on the surface, which results from heating the carbonaceous materials by slow oxidation that may occur only through the passage of air (created by air depression). Coal oxidation process generates oxidation products which are also an environmental problem. If we consider the CO2 or CO, their composition depends on the coal properties and other factors from the process. Th...
Autori: Maria Prodan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27363

Application of the occupational safety self-assessment starts with a document containing dashboard, description of the company (name, location, object activity, organization etc.), description of the work detailing with its components and a brief description of the method of self-evaluation. It continues with a Microsoft Excel document, that is the actual application method and a second document presenting conclusions and prioritizing proposals that may lead to the execution of the protection an...
Autori: Costica Bejinariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27370

Drilling waste management for oil and gas industry involves collection, transportation, processing, recycling, disposal, and monitoring of waste materials in order to reduce their effects on health and environment. In the Exploration and Production industry, environmental concerns have made effective management of drilling waste at well sites a great priority. Effective waste management is thus a key element in a successful drilling project. The industry therefore relies on effective expertise a...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27375

The main objective of this study was to investigate the potential utilization of polyethylene terephthalate PET waste in cementitious matrix, as substituent to cement, to develop lightweight construction materials and for preventing chemical attacks or repairing various reinforced concrete structures. Composites containing different amounts of PET particles, as partial replacement to cement by weight, were characterized by destructive and non-destructive testing. So, the thermal conductivity, ul...
Autori: Ahmed Soufiane Benosman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27381

End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

The data presented in this work has been obtained from experimental research aiming towards the usage of natural resources of the National Park of Sila in Calabria, Southern Italy. Such resources are: “Laricio” pine resin, beeswax, mineral inert and charcoal to make natural glues. Furthermore, research has been done to find out if by using small quantities of carbon nanotubes, the strength of adhesion of prepared glues improves. Raw materials were characterized by physico–ch...
Autori: Pierantonio De Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27402

Steady Raw Materials (RM) supply is essential for the EU economy and increasingly under pressure to sustain the businesses and industries demand. The supply of RM is not only a matter of availability of primary but also of secondary raw materials (SRM). In fact a great amount of waste can be regained as practical and valuable SRM by enhancing the recovery processes from industrial, mining and municipal landfill sites, especially if we consider that Europe is highly dependent on the imports of...
Autori: Giovanna Antonella Dino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27403

This research was focused on the valorization of agro industrial waste/by products available in the local industry with the kilometer zero (km 0) concept, as a replacement of virgin raw materials (clay) to elaborate lightweight aggregates (LWAS). The alternative raw materials were employed as pore forming agent, in order to reduce sintering temperature and energy consumption of the furnace. The three technical nutrients studied were provided for local food industries: sludge from wastewater trea...
Autori: Romina D. Farias
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27405

Two montmorillonitic clays were modified with N-(methoxy-polyethylene glycol) ethylene diamine and tested as sorbents for removal of Rare Earths (REs) from aqueous solutions. Lanthanum was chosen as representing element of REs family and adsorption tests were performed with the aim of selecting a system with good uptake efficiency for the pollutant abatement in wastewaters. The effects of pH were studied and the properties of the obtained final materials were evaluated with simple model syst...
Autori: Elena Maria Iannicelli-Zubiani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27408

Biofuels and biochemicals are currently centre stage in the on-going scientific and political debate. The prevalent opinion is that their use can significantly reduce the greenhouse gases (GHGs) emissions and primary energy demand along their whole value chain. This study aims at evaluating the environmental impact in terms of GHGs related to carbon dioxide (CO2) of secondgeneration sugars (2GSs) production from cardoon residual biomass. Cardoon is a favourable crop in Mediterranean areas for...
Autori: Maria Teresa Petrone
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27413

Improving the awareness of the responsibility of our actions is the basis of achieving the ambitious aim of waste management and prevention established by the European Waste Framework Directive 2008/98/CE and the most recent Circular Economy Package. Circular Economy is connected both to improve manufacturing technologies and also educate people towards responsible consumption and waste reduction. Due to its educational and institutional role, universities provide a context to rethink not on...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27414

This paper describes shortly some outcomes of a project aiming to apply a scientific research directly to industry, passing through a system that wants to promote an economic "Pact" in relation to the new construction and renovation projects of energy, according to its fundamental guidelines of the moment: renewable energy and energy efficiency. The key point is to produce energy from recycled materials that become functional to dwellings (from the garden shed to furnishings, etc.),...
Autori: Marco Santarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27421

Removal of the heavy metal ions from water disposals remains a widespread problem due to their adverse influence on public health. The most harmful materials are the products of nuclear fission called radioisotopes such as cerium ions. Cerium barely interacts with adsorbent materials, therefore the new substances capable to bind cerium are of great interest. Ca and Na alginate samples were incubated in Ce3+ solutions; adsorption capacity was measured and the results were evaluated using Langm...
Autori: Maxim Khotimchenko
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27435

The purpose of this paper is to present the results regarding the obtaining of reducing sugars at the enzymatic hydrolysis of the lignocellulosic material, wheat straws. For these, the lignocellulosic material was submitted to a preliminary pretreatment for destruction of the cellulose crystalline structure and to increase the material's susceptibility to the enzymatic attack. The preliminary pretreated material with diluted acid (0.5%-4%) or with water at different temperatures (120-170&ord...
Autori: Eufrozina Albu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27463

Fly ash ponds are dangerous for the environment because the fly ash can cause multiple harmful effects. This is cause for major concern for researchers and industry people alike. The rise of the water table level inside the ash structure may cause a loss of stability over time, with adverse effects on the environment. Therefore it is necessary to adopt efficient solutions to ensure the stability of ash ponds and rapid measures that can be applied. The use of geosynthetic materials has proven to ...
Autori: Lidia Niculiţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27483

A low-cost magnetic zeolitic material was synthesized from coal fly ash by means of a new, simple method involving alkaline hydrothermal zeolitization of fly ash (FA) followed by low-intensity wet magnetic separation. Scanning electron microscopy with energy-dispersive X-ray analysis was applied to characterize the composition, microstructure, and morphology of the material. The mineral and synthetic zeolite phases were identified by powder X-ray diffraction. The obtained magnetic zeolitic m...
Autori: Annie Shoumkova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27486

Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processi...
Autori: Maria Râpă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27493

The use of activated carbon as filter media for water has gained research attractions over the years. A comparison study of granular activated carbon (GAC) of extracted palm fruit fibres (EPF), palm kernel shell (PKS) with existing filter material (EFM) commercially produced activated carbon for water filtration has been conducted. Palm kernel shells and extracted palm fruit fibres from palm oil mill wastes were processed to form activated carbon by chemical activation process. Scanning Elect...
Autori: Jamaliah Idris
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27498

This study undertakes to characterize through thermal analysis in dynamic conditions a wide range of building materials used for various types of insulation and presents for the first time a comparative analysis of their thermal stability. To this effect, the dynamic thermal analysis TG/DTG was applied. The results show a degradation resulting in one, two or three stages after a complex mechanism, with different mass loss, depending on the structure and atmosphere in which the thermal decomposit...
Autori: Andreea-Camelia Sprânceană
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27514

This study focuses on some mechanical properties resulted from the tensile testing of a set of green composites with a Dammar-based matrix and reinforcement material of silk, flax, cotton and hemp fabrics. To be precise, we have ascertained the characteristic curve, the resistance to and the elongation at fraction, as well as the modulus of elasticity for each set of samples from these composites and for a set of bioresin samples. With the help of an Electronic Scanning Microscope we captured im...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27516

This paper introduces basic information on the biodegradation of polymers as well as the mechanisms of degradation and factors influencing this process. This paper describes prodegradant additives that induce decomposition of polymers to biodegradable compounds with regard to additives causing oxo-biodegradation. Based on the results of experiments conducted for molded pieces made of polypropylene and extrudates made of low density polyethylene with a d2w prodegradant additive, dependences betwe...
Autori: Tomasz Jachowicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27519

It is acknowledged that organic fertilizers and wastes, such as animal slurries/manure from intensive farm enterprise, sewage sludge, poultry litter are and will continue to be spread on agricultural land and provide beneficial nutrients to crops. However, many of these materials which are also potentially polluting if not properly managed can pose a risk to groundwater and surface water quality. Generally, their distribution on the soil is performed with specialized machines to reduce the risk...
Autori: Vasilica Ştefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27545

A polycrystalline CeO2-ZnO catalyst was prepared by using a hydrothermal procedure in order to improve the structural properties. This polycrystalline material was then used to remove organic pollutants from aqueous solutions by the means of photocatalysis. The structural, morphological and optical properties of as-prepared materials were characterized by several techniques, such as UV-visible spectroscopy, SEM, FTIR, XRD. The SEM analysis shows that the crystallite size sample varies in the ran...
Autori: Nicolae Apostolescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27550

Among the organic pollutants, the chlorinated phenols represent an important class of compounds having a stable world market of ca. 100 kt per year. Due to their aryl structure and presence of the chlorine atom, chlorinated phenols are exceptionally recalcitrant toward chemical reactions aimed at their reduction. Adsorption from liquid phase has received special interest due to its flexibility and simplicity in operation. Especially adsorption using activated carbon (AC) has been recognized by t...
Autori: Marius Sebastian Secula
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27552

There is an increasing interest in the food industry and in protective health care for the expansion of natural antioxidants from plant materials. The solid wastes generated by the winemaking industry represent about 30% of the material used and it consists mainly of grape pomace (containing seeds, pulp, stem and skin). It is well known that high quantities of valuable compounds like dietary fibre, oils from the seeds, anthocyanins and phenolic compounds still remain within the grape marc. The p...
Autori: Valeriu V. Cotea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27553

The solid-liquid extraction process and some of its influencing factors such as solid-liquid ratio, temperature and salt initial amount have been investigated. Also, mathematical modeling for mass transfer coefficients calculation was applied. An inert porous solid material (coal), impregnated with 10% and 20% mass NaCl or 15% and 30% mass CaCl2, was used. The leaching was conducted in a fixed bed column, in laminar flow. The CaCl2 impregnated samples were investigated in a column with a height...
Autori: Marcel Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27557

• Environmental engineering and Management Journal No. 4    • AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART II – USER INTERFACE AND FIELD VALIDATION    • COST-EFFECTIVENESS OF OPTIMIZING CONCENTRATED FEED BLENDS TO DECREASE GREENHOUSE GAS EMISSIONS    • FATE AND BIODEGRADATION OF ESTROGENS IN THE ENVIRONMENT AND ENGINEERING SYSTEMS – A REVIEW    • ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27577

• Environmental engineering and Management Journal No. 4    • AN ENHANCED ENVIRONMENTAL MULTIMEDIA MODELLING SYSTEM (FEMMS): PART II – USER INTERFACE AND FIELD VALIDATION    • COST-EFFECTIVENESS OF OPTIMIZING CONCENTRATED FEED BLENDS TO DECREASE GREENHOUSE GAS EMISSIONS    • FATE AND BIODEGRADATION OF ESTROGENS IN THE ENVIRONMENT AND ENGINEERING SYSTEMS – A REVIEW    • ANALYSIS OF THE MATERIAL COMPOSITION OF MIXED MUN...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27576

Recycling of battery components for natural resources sustainability and consumer products has become an important endeavor that demands continuity through effective processes. In compliance with the need for waste management, LiMn1/3Ni1/3Co1/3O2 in the positive electrode of spent lithium-ion batteries has been recovered using specially designed device, consisting of two compartments separated with a plastic sieve of pore size 0.2mm. The upper compartment equipped with a mechanical stirrer conta...
Autori: Oluwatosin Emmanuel Bankolehttp://www.ecozone.ro/reviste.php?RID=27581

The paper presents a case study of a significant intervention conducted on a major Italian airport for improving the structural and functional properties of the runway safety STRIP in order to fulfill specific national and international standards. The STRIP had to accomplish strict requirements in terms of the maximum longitudinal and transversal terrain slope and minimum values of bearing capacity; in particular, soil bearing capacity was identified as the main lack and thus the most urgent ac...
Autori: Maurizio Crispino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27603

Pyrometallurgical recycling of lead from spent batteries entails secondary waste fractions generated in the blast furnace as iron stone and lead slags. For further purification of both fractions, hydrometallurgic processing is proposed. This paper focuses on purification of iron stone, in view of recovering metals (mainly lead) and of producing decontaminated iron stone fit for further recycling. The results demonstrate that iron stone is mainly composed of iron and lead; copper, zinc and antimo...
Autori: Bart Van der Bruggen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27642

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

The main objective of this research was to evaluate the environmental impact generated by municipal solid waste during its collection, transportation, treatment and processing in the south-west region of the department of Norte de Santander, Colombia, by means of Life Cycle Assessment (LCA). Three strategies for waste management were considered: the current baseline situation, wherein 100% solid waste was taken to the landfill; plus, an optimistic and a pessimistic scenario in which solid was...
Autori: Oscar Orlando Ortiz-Rodriguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27665

The landfill reclamation project took place in the period from 2008 to 2009. Forestry reclamation was carried out in 2009. The aim of this project was to establish the growth of particular plant species, quantify plant species survival and changes in species properties over time. A phased approach was utilized to evaluate the technical and economic feasibility of the reclamation project; based on the results of these evaluations, in 2011 approximately 90 % of plant species survived during the...
Autori: Magdalena Daria Vaverková
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27668

The performance of cathode affects the overall performance of a microbial fuel cell (MFC), and cathode configuration affects the fabrication cost of this bioelectrochemical system in a large way. Various modifications in cathode structures have been observed in MFCs. Among them air-cathode MFCs are considered to be the most efficient and sustainable option due to elimination of aeration, as required in aqueous cathodes which consumes energy and increases operating cost of MFCs. An air cathode us...
Autori: Pritha Chatterjee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27680

Unlike other vegetables, mushroom production requires several substrate ingredients, energy to sterilize the substrate, water to humidify the fruiting house and waste management of the spent substrate and used materials. This work studied the environmental impacts and eco-efficiency of sajor-caju mushroom (Pleurotus sajor-caju (Fr.) Sing.) production in terms of climate change potential, acidification potential, water depletion potential and fossil fuel depletion potential, using life cycle asse...
Autori: Siriprapa Ueawiwatsakul
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27685

Hexavalent chromium Cr(VI), a constituent of wastewater from many industries, is regulated by the Environmental Protection Agency (EPA) as one of the priority pollutants. Adsorption is an important technique that can be used for Cr(VI) removal from wastewater. The challenge in adsorption techniques is to find a cheap, widely available adsorbent that has a high adsorption capacity to Cr(VI). Dates stones (DS) and palm fiber (PF) are two agricultural wastes that are produced from palm trees. These...
Autori: Reda Abubeah
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27689

Industrial wastewater is of particular importance. In most wastewater treatments, physicochemical parameters are used to determine the performances which are costly while protozoa can be used as less expensive biological indicators to determine the efficiency of the treatment plant. The purpose of this study was to investigate the relationship between protozoa and physic-chemical characteristics of the Abadan wastewater treatment industry. Samples were collected from wastewater stabilization po...
Autori: Abotaleb Bay
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27694

One of the main causes of global climate change is deforestation. Wood is largely used in construction, furniture, and pulp and paper industries, which consume hundred of millions of cubic meter of wood year by year. Forest surfaces decrease rapidly at global level and this reality is of crucial importance for world global ecological footprint. Shortage of pulpwood for paper industry became a great challenge and, for this reason, other raw materials must be taken into consideration. Recovered pa...
Autori: Ana Maria Cheșcă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27703

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

The present paper focuses upon the analysis of 226Ra, 232Th and 40K radionuclides, making use of high-resolution HPGe γ-spectrometry devices. By means of this technique, the radiological risk is investigated in the case of various sand samples. The natural concentrations for 226Ra, 232Th and 40K, from sand samples, ranged from (9.3-20.0 Bqkg-1), (9.1-23.7 Bqkg-1) and (203.5-403.3 Bqkg-1), respectively. The radium equivalent activity of sands under investigation was also analyzed and ranged...
Autori: Dorin Vasile Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27775

Geocomposite materials consisting of lightly cemented mixtures of expanded polystyrene beads (EPS) and backfill soils are commonly used as fillers and for the construction of light weight embankments. The constant normal stress (CNS) and constant volume (CV) direct shear parameters as well as the relationship between gradation properties of four residual granular backfill soils and direct shear parameters of lightly cemented mixture of EPS and backfill soils was evaluated. The maximum density an...
Autori: Felix Okonta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27771

Influence of soil pH on the mechanical characteristics of glass reinforced plastic (GRP) pipes type was often investigated in different situations encountered in the field. GRP degradation is directly proportional to the exposure to soil with non-neutral reaction. The theoretical and experimental results lead during time to design standards, which allow the application of GRP pipes in water and soil, so as minimum interferences with the materials used in the manufacture of pipes would appear. Sa...
Autori: Ana Diana Ancas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27768

Changing wastes into raw materials is one of the most favored options for waste management, as it diverts wastes from landfill and saves resources. Fibers, either vegetable (cellulosic) or synthetic, may be added to cement pastes in order improve the properties of concrete or mortar by reinforcement. At the same time, if the source of fibers is wastes, then such processes make ways for recycling. In the work described here we studied the compatibility of residues from the nonwoven textile indust...
Autori: Hugo Monteiro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27766

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

This study applied a novel receptor design to the development of an indoor air quality diagnosis (IAQD) system. Indoor air pollutants were converted into simple air quality and health damage indices to evaluate the health risks associated with renovated and unrenovated offices. The outcomes of the IAQD methodology presented R2 values of 0.705 and 0.700 for renovated and unrenovated offices, respectively. These values indicate moderate level of prediction accuracy. IAQD results related to typical...
Autori: Huang-Chin Wang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27735

Leather manufacturing process generates significant volume of wastewater. Deliming is one of the unit processes, in which about 4.5 L of wastewater is generated per one Kg of pelt. Reuse of wastewater from the unit processes, where significant volume of wastewater is generated is much important to address pollution mineralization and water conservation. Presence of significant level of organic pollutants is the primary factor that deters reuse of waste streams. In this paper, the Electro-Oxidati...
Autori: Sundaramoorthy Sundarapandiyan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27744

The paper describes a flexible and low cost method regarding the progress of improvement, in terms of foot diseases, in case of wearing orthopedic shoes containing progressive correction orthotic insoles. The research in the field aims at two purposes. The first one is to find an effective method for orthopedic shoe insoles manufacturing, with the role of progressively correcting plantar diseases by using cheap solutions based on the recycled materials. The research focused on an adaptive insole...
Autori: Barbu Braun
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27757

Until now, humanity has strived to makes efforts for warranting the economic development on a sustainable way for well-being improvement, simultaneously with resource preservation and environmental protection. The industrial production processes, which generate added value and ensure people welfare are in connection with the environment regarding resource consumption and waste generation. In order to work on a sustainable basis, industry should attain a balance between economy, ecology and comm...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27759

In this paper, the typical measurement techniques and production procedures defined in the UNI-EN guidelines for ceramic manufacture are taken into consideration to evaluate the properties and the characteristics of the bricks produced by using a mixture containing cubilot slag. The results of the experimental tests demonstrate that these measurement techniques are not enough to define the safety of the waste bricks. Up to now, UNI-EN guidelines for ceramics do not define crystallinity measureme...
Autori: Domenico Luca Carni
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27787

Recently, more and more companies are implementing good environmental practices. Environmental certifications, besides being valuable management tools for companies, given the opportunity to strengthen their role on the market. An example of such virtuous behavior is the case of Valcucine, an enterprise of the Livenza furniture district in Northern Italy. Valcucine focuses its care in the production of furniture, in particular of kitchen units, characterized by sustainable production, eco-compat...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27797

According to recent estimations, the total yearly amount of end-of-life tyres (ELTs) arising in Europe exceeds 3 million tons; more than 95% are managed through mechanical and thermal treatments because ELTs represent a useful resource both of materials and energy. For this purpose, the goal of the present work is the assessment of the environmental impacts of a novel pyrolysis process and the comparison with alternative ELTs valorisation or disposal scenarios. Life Cycle Analysis (LCA) methodol...
Autori: Esmeralda Neri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27798

The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

This paper deals with the relevant environmental issues concerning marine sediments contamination, for which there is the need for further development of sustainable remediation technologies. Among the in-situ remediation options, the reactive capping turns out to be an interesting approach. On the other hand, when the sediments must be dredged, the stabilization and solidification (S/S) treatments can represent an efficient and sustainable solution for the recovery of the materials, in the spir...
Autori: Francesco Todaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27801

This research aimed to analyze the impact of the introduction of a separate collection system for organic waste and cardboard in the Governorate of Tulkarem, West Bank (Occupied Palestinian Territories). The amount of waste diverted from the final disposal at the landfill of Zahret Al-Finjan was quantified and the quality of separate materials was evaluated. An economic and environmental analysis was performed to quantify the impact of separate collection in terms of greenhouse gas emissions and...
Autori: Francesca Villa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27802

This paper exposes the research activities regarding REBAF (Energetic Recover of River Biomasses) project, focused on the maintenance operations self-sustainability of the Secchia river (Italy). Poplar was found as the most abundant and representative wood plant of Secchia riverbanks, with a good behavior during gasification process: from 1 hectare of maintenance every three year, it was possible to produce 23 MWh of electrical power and 31 MWh of thermal power. The biochar obtained was characte...
Autori: Vittorio Vezzali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27804

The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

The analysis by numerical simulations can be applied to building materials subjected to different climatic conditions to envisage the influence of environmental factors in terms of drying time, water absorption and thermal performance of materials. Currently there is a wide variety of new building materials used for insulation, waterproofing and rehabilitation, each contributing in a specific way to constructions improvement during their service life. In time, every building is subjected to degr...
Autori: Alexandra Alisa Găină
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27863

This paper seeks to evaluate the quantities of e-waste in Botswana from 2000-2019, with a view towards formulating an effective and sound e-waste management system. Due to a lack of complete historical records on e-waste quantity and quality, this was achieved by the Grey Model GM(1,1) forecasting method. Our estimations indicate that an average weight of about 293.18 tons of e-waste will be generated in 2019 in the country. Considering an economic lifespan of between 3 and 10 years, more e-wast...
Autori: Daniel Mmereki
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27838

To investigate the sources and spatial distribution of heavy metals in soil, samples were collected at two scales from the alluvial plains of Shenyang, China. Statistical analysis at small scale showed average concentrations of Cu, Pb, Zn, Ni, Cr and As of 36.76, 33.33, 100.06, 37.98, 91.26, and 7.99 mg/kg, respectively. Corresponding large-scale concentrations were 34.11, 46.38, 82.44, 32.51, 83.77, and 24.06 mg/kg. At both scales, Ni and Cr were mainly controlled by parent materials and Pb ...
Autori: Jin Wu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27877

The effect of synthesis conditions on sorptive properties of glycerol-derived mesoporous carbon materials were studied. Sorption properties of the synthesized carbon-based materials regarding to different adsorbate molecules, as well as water vapors, phenol and methylene blue molecules were analyzed. The sorption capacity of the synthesized mesoporous carbons depends upon synthesis conditions, namely upon pyrolyzing temperature and carbon precursor to silica weight ratio, being determined by ...
Autori: Maria Ignat
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27880

The main topic of this study is the photo-optical and electrochemical behavior of a series of fluorinated copolyimides containing both oxadiazole and perylene moieties in the main chain. The polymers prove a strong photo-optical stability on a large temperature domain and display different types of photoluminescent behavior in solution and in solid state, with emission maxima in the bluish and green–yellow domains. Cyclic voltammetry investigations suggest that the polymers can be easil...
Autori: Radu-Dan Rusu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27883

The synthesis of dimethylamino-propylamine pullulan, DMAPA-P, with a substitution degree of 0.4 was performed in dimethylsulfoxide using N,N’-carbonyldiimidazole as activator and dimethylaminopropylamine as amination agent. Then, two quaternary derivatives (trimethylammonium-propylamine pullulan, TMAPA-P, and benzyldimethylammonium-propylamine pullulan, BzDMAPA-P) were prepared from DMAPA-P by quaternization with methyl iodide and benzyl chloride. The behavior of new pullulan derivativ...
Autori: Anca Giorgiana Grigoras
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27902

In this work, the examination of separation of gypsum from wastewater generated during the machining of casts and the method of waste gypsum management have been presented. This waste gypsum is produced in Ortolab Poland facilities. Gypsum casts are cut and ground in water-cooled circular saws. Wastewater, with over-normative content of suspension, 10000 mg L-1 and sulphates, 1600 mg L-1 is produced in the process. The analysis of water and wastewater management in Ortolab Poland facilities l...
Autori: Ewa Liwarska-Bizukojc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27910

In this study we investigated the possibilities of using recyclable fine and coarse grain waste obtained by grinding Polyethylene Terephthalate (PET) containers, as light filling materials for different applications (clay dams, highway embankments, and backfills behind retaining structures. Various geotechnical tests were performed on clayey soil and soil-PET mixtures using recycled fine and coarse granules of Polyethylene Terephthalate bottles. The results indicated that the use of the recyc...
Autori: Osman Gunaydin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27920

For assessing the intrinsic safety to mechanical sparks, two dedicated methods are implemented in testing laboratories and further used for the conformity assessment of products with regard to explosive atmospheres ignition, namely: impact test and friction test. The purpose of the article is to present the results obtained by using the first method mentioned, results which shall be applied in further research for comparison with the ones resulting from the friction test. The article presents...
Autori: Adrian Marius Jurca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27957

The current paper is an overview on previous and ongoing research carried out by the authors concerning the use of Computational Fluid Dynamics for the accurate classification of hazardous Ex areas generated by flammable gases, for the optimization of computational simulation of air-methane mixture explosions by using ANSYS CFX and FLUENT and for calibrating computational simulations of gas explosions using the Schlieren effect. These research works containing analytic studies have led to the...
Autori: Vlad Mihai Păsculescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27962

This study evaluates the environmental impacts of four types of frozen food packages throughout their lifecycle and suggests strategies for reducing their related environmental impacts. The four most widely used frozen food packaging materials were chosen for this study: (1) pouches composed of low-density polyethylene (LDPE) film; (2) pouches composed of polyethylene terephthalate (PET) and LDPE film laminate; (3) cardboard boxes coated with LDPE; and (4) multipackage composed of cardboard boxe...
Autori: Daina Kliaugaite
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27979

In this paper, we determined some mechanical properties of a new category of green composites, based on tensile tests. More precisely, we selected a set of samples from a new bio-resin based on Dammar and two sets of samples from green-composites with matrix by bio-resin and reinforced with almost compact layers of Typha latifolia or Schoenoplectus lacustris. For these built materials, we obtained the characteristic curve, tensile strength, percentage elongation after fracture and elasticity mod...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27980

In this paper, several image analysis techniques have been applied aiming to obtain useful information regarding the processing of municipal solid waste polymers. An automated color extraction method has been applied in order to quantize the color distribution in the polymer wastes aiming their resource and time-efficient separation according to their color. Also, by processing different density fractions from the polymer waste the color of the final material has been predicted, as well as th...
Autori: Silvia Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27994

Energy and resource consumption in construction projects is one of major causes to global warming. In order to evaluate the environmental load of construction projects, previous approaches calculated the quantities of construction materials and energy consumption from the use of equipment based on detailed design information after the completion of design. As a result, it is difficult to estimate environmental loads prior to design completion. This study is to develop an estimating model whic...
Autori: Ju-hyun Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28007

Sustainability and renewability in constructional materials and also utilization of such materials for various engineering purpose is the need of the hour. Green retrofitting with the aid of green fibre reinforced polymer (FRP) materials, made up of natural bio fibres like sisal would contribute to sustainable development. Non fossil-fuel carbon precursor organic fibres, i.e. sisal FRP composites were used for retrofitting of reinforced concrete (RC) beams, designed to undergo shear failure. ...
Autori: Tara Sen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28025

Hydrocarbon spillages are an increasing problem in Mexico, which has left large areas of contaminated land that entail negative effects on environmental, economical and social aspects. Such soil contamination demands fast, efficient and cost-competitive remediation technologies. This work explores activated carbon (AC) adsorption as a fast soil treatment to lower hydrocarbon concentrations in a contaminated soil from Puebla, Mexico, reusing an AC residue for such purpose. Both, semi-wasted AC an...
Autori: Sandra Arroyo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28055

Since the middle of the past century, when the synthetic fibers began their rise, wool has steadily lost importance in the textile sector, and now is a marginal fiber on the textiles market. Great amounts of non-marketed raw wool have turned from an income source for sheep farmers into a problematic waste, which is, at best, burn or landfill. With increasing interest for sustainable use of natural resources, wool was reconsider as an underrated, underused renewable resource, worthy of a bette...
Autori: Hossein Rajabinejad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28031

Inorganic thermal insulators are commonly used to improve energy efficiency. However, environmental and health aspects of their production until the end of life have been increasingly concerned. Agricultural wastes including rice straw, rice husk and corn cobs are abundant in Thailand and converted into value-added products such as thermal insulation materials offers a viable recycling opportunity as the ecological burden of a product has now become a widely-discussed issue. In this paper, gl...
Autori: Phairat Usubharatana
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28033

Substantial quantities of toner cartridges are produced and used in photocopiers and printers every year. Spent toner cartridges are classified as hazardous waste because they contain toner powder with specific chemical composition, making a recovery of waste toner cartridges a very important issue from the aspect of waste management and environmental protection. Spent toner cartridges are mechanically processed to exploit valuable materials such as metals, plastics and magnets and to separate t...
Autori: Ivana Melnjak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28053

Proteins from Hermetia illucens (or Black Soldier Fly, BSF) have been employed in this study as possible source for bioplastic formulation. This type of bioplastic can replace the actual materials employed in agriculture, avoiding the critical issues concerning the soil pollution due to conventional plastic end-life. Different plasticizing agents (glycerol and polyethylene glycol) have been tested and the ability to generate a homogenous film, through wet casting, has been evaluated. Characteriz...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28074

The goal 12 of the 2030 Agenda for Sustainable Development takes into consideration the responsible consumption and production in the perspective of circular economy. The agri-food sector is more actively involved in these initiatives, because it offers the possibility to exploit waste and by-products, by adopting suitable biotechnologies. Such processes can be carried out either under aerobic conditions, for the production of compost, or anaerobically, for the production of biogas. In this work...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28078

Sediments in coastal areas can accumulate a variety of contaminants, acting as both carriers and long-term secondary sources of contamination for aquatic ecosystems. Nowadays, there is a growing interest on developing new assessment criteria of sediment ecological quality for setting priorities and management strategies of contaminated materials. According to the literature, the weight of evidence (WOE) approach has been developed to provide a multidisciplinary characterization which combines di...
Autori: Francesco Todaro
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28089

The activities connected with the construction sector are responsible for several environmental impacts, both in the construction sector, and in the many manufacturing sectors involved in the supply chain of materials and products (mining sector, manufacturing sector, waste treatment etc.). The building products have a marked cross-sectorial connotation, according to the ANCE 2016 report, 31 economic sectors out of 36 are suppliers in the construction sector. One of the possibilities to reduce t...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28090

Over the last few years, the use of nanomaterials in the construction industry has grown prominently. Nanomaterials can considerably modify the properties of construction materials and even improve their performance. Despite their merits, considerable research has reported that nanomaterials pose a potential risk to human health. For this reason, it is important to fully comprehend the effects of nanomaterials on human health and the environment throughout all phases of their life cycle, includ...
Autori: Saeed Kamali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28091

The maintenance of flexible roads or roads at end of life service generates high quantities of reclaimed asphalt pavement every year. The reuse of these materials, considered for a long time as waste, allows a substantial saving in transport, energy, and maintains dwindling natural resources. Recycling of asphalt also helps to reduce inert waste storage volumes, and conserve valuable landfill space. The applicability of recycled asphalt was tested in laboratory, and asphalt mixtures containing 2...
Autori: Mehena Oualit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28117

The aim of the study was to determine the relation between the composition of university recyclable material collected (plastic, paper, metal and glass), education-related factors such as the academic calendar and work stoppages, and regional factors such as climate, regional economy and composition of the urban waste collected over an 8-year period. The study was conducted based on the composition of recyclable dry solid wastes at the Federal University of Rio de Janeiro, quantified after th...
Autori: Victor Becker Tavares
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28127

The mesoporous MCM-48 was synthesized at room temperature with different templates such as hexadecytrimethylammonium bromide (C16TABr), hexadecytrimethylammonium chloride (C16TACl) and dodecyltrimethlammonium chloride (C12TACl). The obtained materials were characterized by XRD, N2 adsorption/desorption, FTIR and SEM techniques, and their performance as uranium adsorbent were investigated. In this framework, the effect of contact time, pH of solution, initial uranium concentration and temperat...
Autori: Meriem Chabane Sari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28131

...
Autori: Călin Corduban
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28132

Building industry is a very large domain in the global economy and it has a lot of consequences over the environment through many and different aspects. These consequences are various, from the more and more extended area of construction up to gas emissions released during materials manufacture and transportation, construction process, exploitation of buildings and, finally, their deconstruction. The concrete, the most used material in construction industry all over the world, must become green...
Autori: Catalina Mihaela Gradinaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28138

The main goal of this work was to develop a cheap and easy method for the synthesis of the porous metallosilicate macrospheres. Zirconium silicate macrospheres with diameters in the range 1.5 – 1.6 mm were obtained by the spray gelling technique, using the multi templating method. Tetraethyl orthosilicate was used as silica source. The chitosan played a dual role (pore and shape generating agent), while other inexpensive and easily accessible biomaterials including yeast, sugar and gelatin...
Autori: Emil Ioan Mureșan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28148

Molybdate anions are used in a lot of fields and represent an essential trace element for plant and animal life; however, excessive amounts can cause adverse effect on various organism and environment. Therefore, in the present paper the adsorption performance of MgnFe- layered double hydroxides in the removal process of molybdate from aqueous solutions was studied. The layered double hydroxide (LDH) was synthesized by co-precipitation at low oversaturation method. Different ratio between Mg and...
Autori: Alin Golban
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28152

Soluble dyes are intensively used in various industrial activities. They represent an important class of water pollutants from which they are rather difficult to remove. This paper focusses on the elimination of Congo Red (CR) ionic azo dye by adsorption on a low cost material. Cherry stones were used for activated carbon preparation by carbonization method. A temperature of 600 °C and a time of 4 h were found as adequate parameters for the physical activation and led to a final white powder...
Autori: Cristina-Gabriela Grigoraș
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28153

In this work, the removal of methyl orange (MO) and Cd2+ by simultaneous adsorption on adsorbent obtained from modified charcoal (BCBH) coated with TiO2 has been studied. The synthesized materials obtained from wood branches were characterized using atomic force microscopy (AFM) for the roughness and SEM to determine the morphology of the surface. EDX spectroscopy indicates the presence of C, N, O, Na, K, P and Ti on the surface of the adsorbent materials. The micro-porosity and BET specific sur...
Autori: Nicoleta Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28157

The contamination of aquatic and terrestrial environments by pesticides is highlighted by their possible toxic properties and poor biodegradability on the environment. The development of low cost by products from agricultural sectors as a suitable solution for contaminated areas remediation is of great environmental interest. Straw wastes can be considered as a promising alternative to remove different chemical compound that are environmentally toxic. In this study, some materials derived from ...
Autori: Irina Gabriela Cara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28161

Sodium silicate, iron sulfate, magnesium sulfate, and zinc sulfate were used as the raw materials to prepare a new inorganic polymer flocculant, polysilicate ferric magnesium zinc (PSFMZ), using direct recombination. The effects of molar ratio of zinc to silicon, ratio of iron to magnesium, reaction temperature, and reaction time on deoiling rate were explored. The optimal synthesis conditions for the flocculant for the thermal-washing treatment of oily sludge were determined. Results showed tha...
Autori: Lanlan Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28165

The goal of this paper is to contribute to environmental improvement. This goal has been achieved by the development of an algorithm that allows the optimization of fuel consumption and transport of combustion products. The paper considers the outlier – robust recursive algorithm. This algorithm is used for identification of multivariable ARMAX (Autoregressive Moving Average with Exogenous Variables) models. In this paper, we introduce pseudo-Huber loss function which is a continuous nonli...
Autori: Vojislav Filipovic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28167

The valorization of a metallurgical waste (i.e., an iron-rich slag) as raw material for the fabrication of high hardness glass-ceramics using differential thermal analysis, X-ray diffraction, X-ray fluorescence and scanning electron microscopy was investigated. The melting of the slag was aided by the addition of waste glass cullet (WGC) and the vitrification field of this system was investigated. The non-isothermal crystallization kinetics of the parent glass with the highest slag content was s...
Autori: Erika Iveth Cedillo-GonzĂĄlez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28168

Invasive plant species, like Indigo bush (Amorpha fruticosa L.), Boxelder (Acer negundo L.), Japanese knotweed [Fallopia japonica (Houtt.) Ronse Decr] are altering the conservation status of terrestrial ecosystems along the Mureș Floodplain Natural Park in Romania. On a long run, and a large geographic scale, the invasive species have a high potential to generate a negative impact on the environment and the economy. Hence there is a stringent need of preventing, tracking down, and controlling i...
Autori: Oana BrĂŽnzan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28170

Waste is one of the main environmental problems of the twenty-first century. The construction industry plays a critical role in this problem. Reducing construction and demolition (C&D) waste to a minimum is crucial considering its negative impacts on nature, human health and economies. Determining designers’ awareness levels about the fact that the majority of waste generated in all life stages of buildings are largely based on design-related decisions and this waste can be reduced in ...
Autori: Burcu SalgÄąn
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28172

This study aims to evaluate the properties of different wastes obtained from four red ceramic brick industries in the northern region of Santa Catarina, Brazil. The characterization of the clay brick waste (CBW) was performed using the XRD techniques, XRF, FTIR, DTA and SEM. Techniques to determine the pozzolanic activity, particle size, B.E.T. surface area and specific mass were used. The consumption of calcium hydroxide (CH) in the cementitious pastes with the CBWs was also measured. An app...
Autori: Adilson Schackow
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28184

Inorganic ceramic materials is receiving more attention in recent times due to their unique characteristics which include different pore structures, hydrophilic surfaces, high chemical, thermal and mechanical stabilities that offer avenues for application in water treatment. In the present work, cost-effective clay ceramic water filters of different designs were developed from clay (50, 60, and 70) %, sawdust (15, 20, 25, and 35) %, grog (5, 10 and 15)% ratios plus 5% bone char by volume and ...
Autori: Enyew Amare Zereffa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28196

This present study, investigates the performance of activated sardine scale powder (ASSP)/ Cellulose acetate (CA)/Polyvinylpyrrolidone (PVP) and powdered activated carbon (PAC)/ Cellulose acetate (CA) / Polyvinylpyrrolidone (PVP) composites membranes prepared by phase inversion for the elimination of humic substances (HS) from aqueous solutions. The materials and composites membranes were characterized by FTIR, XRD, SEM analyses. Overall, the results exhibit the higher performance of ASSP /CA/ P...
Autori: Naziha Sid-Sahtout
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28199

The films and the developing solutions used with radiological films contain a number of harmful substances that are very toxic to the environment, as well as to the living organisms, particularly aquatic organisms. Therefore, this type of toxic waste requires simple, but adequate collection and treatment measures, in order to be transformed into environmentally friendly products. This paper reviews the existent knowledge and the methods for the management of this special waste in dentistry-rela...
Autori: Mariana Constantiniuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28201

The study is focused on creating magnetic mesoporous materials through the insertion of a nickel ferrite into the structure of kaolintype clay. Sol-gel auto-combustion method was employed to synthesize the materials, using glycine and tartaric acid as chelating/combustion agents. This is the first study on the combined effect of different fuel agents and of clay-to-ferrite molar ratio on the structural, textural, magnetic and adsorptive properties of nanocomposites. The value of the average por...
Autori: Stefana Cojocaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28210

Torrential watershed management actions should be integrated and their results designed to last for a long time. In Romania and in other countries, these actions cover the entire area of the watershed (slopes, banks, and riverbeds). They consist of complex sets of structural and non-structural measures and works designed to control runoffs and erosion, protect social-economic objectives and improve degraded lands. The most vulnerable structures are the hydrotechnical structures, which are place...
Autori: Alin-Lucian Mihalache
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28211

In the last decades, the effects of the climate change phenomena and the consumption rates of raw materials have led to an increasing awareness regarding the need of implementing the sustainable development concept at the global scale. The activities we complete each day have a direct negative influence over the current situation of the natural ecosystems, and therefore it is highly important to understand and reduce at the same time our global environmental footprint. One of the most significa...
Autori: Sebastian George Maxineasa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28219

Techniques such as composting, a controlled process of decomposition of organic materials, have become fundamental to minimize the problems associated with the organic fraction of urban solid waste, as the potential to cause damage to public health, the environment and, consequently, to economic and administrative aspects can be related to this kind of waste. Microbial activity is also highlighted as a relevant factor since the microorganisms are fundamental in the degradation of organic matter...
Autori: Priscila da Costa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28222

Architects and engineers play an important role in the choice of innovative and environmentally sustainable materials and techniques. To define these materials and techniques, they mobilize competencies acquired throughout their lives. To learn the profile of the environmentally innovative architect and engineer in Brazil, we created a self-assessment instrument that allows us to identify essential characteristics in practice, namely, which competencies are mobilized when they choose an environ...
Autori: Elaine Resende
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28223

Cultural heritage objects represent valuable testimonies of the past, which must be kept in the right condition to transmit to future generations. Together with the spectacular progress recorded by humankind regarding technology, opportunities to obtain valuable data on heritage objects so as to preserve them have started to emerge. The current researchers aimed to determine the internal composition of the colors and materials used in some paintings from a historic wooden church monument, from ...
Autori: Elena Demenchuk
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28230

Release of dyes without performing adequate treatment into the water can lead to environmental risk and serious health problems. The development of effective and economic adsorbent materials for the removal of dyes from industrial wastewaters has gained great consideration in recent years. In the present study, a novel bio-based nanocomposite has been developed for ultrasoundassisted adsorption of malachite green (MG) from aqueous solutions. The synthesized adsorbent consisting of both hydropho...
Autori: Mohsen Nekoeinia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28232

Pay as You Throw (PAYT) is a usage-pricing model for the disposal of Municipal Solid Waste. The implementation of the PAYT approach requires three main elements: a) measurement of the generated amount of waste; b) a means to identify the waste generator; c) the unit pricing for individual charging based on the amount of waste collected and services provided. The PAYT system splits the overall municipal solid waste tax into one fixed part, no-service dependent and a variable part related to the a...
Autori: Gaetano Drosi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28285

The aim of this study is to design and characterize a new controlled release fertilizers category by using valorization of residues from agri-food, industrial and post consumers activities normally allocated into landfill disposal. The underlying strategy in materials research fully agreed with the circular economy perspective and the more recent European legislation about critical raw materials recovering. This study covers the development of lightweight aggregates, based on a local red clay (k...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28286

Three scenarios for the management of Municipal Solid Waste (MSW) produced in the study area of Bari (Southern Italy) were defined and evaluated in terms of separately collected material and fate of the residual fraction. The first scenario represented the bring points MSW separate collection system in the current configuration with a collection rate approx. 40%. The second scenario considered the study area in the optimal configuration, with a percentage of separate collection > 80% obtaine...
Autori: Sabino De Gisi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28293

Every year 93 billion tonnes of raw materials are consumed, but only 9% of them are reused: a potential of about 3 trillion dollars worldwide, 88 billion in Italy, according to Growth Within: A Circular Economy Vision for a Competitive Europe by Ellen MacArthur Foundation with McKinsey. A vehicle is potentially recoverable, in its components for more than 95%, an industrialised process of treatment of end-life vehicles (ELVs). Optimising raw material recovery is currently possible and advantag...
Autori: Luca Pomili
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28295

Brominated flame retardants (BFRs) are used in different types of products such as plastic, textiles and electronic circuits with the aim to increase fire resistance and to avoid or to delay the propagation of accidental combustion. However, high concentrations of bromine in waste from electrical and electronic equipment (WEEE) hinder the possibility of their use as secondary raw materials. Furthermore, the possibility that BFRs can be released during mechanical recycling processes, imposes the...
Autori: Giuseppe Bonifazi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28296

The steady increase in separate waste collection has highlighted the urgent need to adequately deal not only with urban waste (differentiated and undifferentiated) but also with special waste produced by separate waste collection and recycling processes. Source collected municipal solid waste produces different waste streams. One of this is the organic fraction of municipal solid waste (OFMSW). This fraction is central for circular economy, since it can be further transformed in order to recove...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28302

A circular economy system will allow company to directly operate an effective re-cycling policy. Establishing a new “zero waste” impact scheme, in order to recover by-products from the production process, thus leading to an increased market price in comparison to their economic value, and by doing so with full respect of the blue and circular economy standards applied to the product. The main objective of the PVC upcycling project is to facilitate the transition of R.ED.EL.’s ...
Autori: Consuelo Nava
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28304

The ocean is an indispensable source of materials and energy for the survival of human beings and social development. It is also an essential factor affecting climate change and ecological balance. In view of the dynamic, three-dimensional (3D), and complex marine environment, this study proposes the construction and dynamic visualization of a marine spatio-temporal process model based on Network Common Data Form (NetCDF) and optimal interpolation. The proposed model combines the advantages of ...
Autori: Xu Shenghua
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28315

This paper addresses the direct transfer of knowledge from university to manufacturing industrial sector, providing solutions to transform production/manufacturing waste into resources and closing loops in the process according to circular economy values. For this purpose, eco-innovation and eco-design were selected and discussed in order to be applied as tools to support knowledge transfer in the context of circular economy. These tools are focused on the re-design of process and products found...
Autori: Petronela Cozma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28328

Saline-sodic soil reclamation can be enhanced with a sustainable and environmental approach by using organic waste materials. Moreover, wastewater can be used in leaching processes to protect freshwater resources in regions with water shortages. The aim of this study was to reclaim saline-sodic soil by using recycled wastewater and stabilized sewage sludge together with gypsum. The experiment was designed with three replicates using four different sewage sludge doses (0, 4, 8 and 12 kg m-2), an...
Autori: Almujtaba Hassbalrassol Muhammed Abdallh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28330

Since the emission of greenhouse gases is an important environment issue, this paper presents an analysis of CO2 emissions between two different building methodologies: conventional masonry and light steel frame. To this end, a 70m² building project used in Social Brazilian Housing Programs (SBHP) built according to both methods was analyzed. In addition to that, the quantitative materials used were determined, according to the building services (infrastructure, superstructure, closing and...
Autori: Silmara Dias Feiber
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28332

At present, the production of oily sludge is huge, and the micro-emulsion method can effectively separate crude oil and water from the oily sludge by reducing the interfacial tension between oil and cement. In this paper, the micro-emulsion was prepared by using surfactants, such as sodium dodecyl benzene sulfonate (SDBS), cetyltrimethylammonium chloride (CTAB), sodium dodecyl sulfonate (SDS), sodium cetyl sulfate (CAS), and alkylphenol polyoxyethylene ether (OP-10) as the main raw materials. T...
Autori: Lanlan Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28344