Abstract
Municipal (urban) wastewater treatment creates environmental problems, especially in urban areas where urban waste water and
industrial waste water have a common treatment system. The present paper aims at describing a method which facilitates the
mixing of resulting sludge with metallurgical coke in the process of iron agglomeration due to the heat input brought about by the
combustibles in their composition. This method may be applied to reduce the huge quantities of sewage sludge which results
from urban wastewater treatment. Since our work is focused only on sewage sludge use, the first stage of our research included a
series of tests which were made on sewage sludge collected from the wastewater treatment plant (WWTP) of Galati to determine
their elemental composition in relation to calorific values. As regards the second stage, a series of measurements were made to
determine the calorific values of sewage sludge and mixtures of sewage sludge with coke in order to find the optimal proportion
to be used in the metallurgical process. On the basis of the results obtained, we suggested two possible situations in which
sewage sludge and coke mixtures could be used in the metallurgical process: 1) using sewage sludge in the process of cast iron
extraction in the blast furnace and 2) using sewage sludge as raw matter in the process of cast iron production in the blast
furnace.The purpose of this study is twofold: 1) to find an alternative for using the sludge resulting from the process of
urbanwastewater treatment and 2) to reduce the consumption of coking coal in metallurgical processes.