EVALUATION OF BIOELECTROGENIC POTENTIAL OF FOUR INDUSTRIAL EFFLUENTS AS SUBSTRATE FOR LOW COST MICROBIAL FUEL CELLS OPERATION
Microbial Fuel Cells (MFCs), the bioelectrochemical devices for conversion of waste into electricity through bacterial metabolic
activity can use substrates with different complexity and strength. Wastewaters with moderate to high organic content can be
exploited as MFC substrates. In this study, four different industrial wastewaters (from a chemical company, milk industry, soyabased
food and soft-drink company and laundry) with different compositions were used as substrates in identical MFCs. In the
design of MFC, carbon cloth was used as anode and low-cost carbon based, non-platinized electrode as air cathode. Anode and
cathode were separated by an ion permeable membrane Zirfon®, directly attached on the cathode. After initial operation with 10
mM acetate as substrate, the cells were switched to real industrial wastewaters without pre-treatment. When operational, an
electrochemically active biofilm and anode open circuit voltage (OCV) of -500 mV vs. Ag/AgCl. OCV was obtained which
recovered after dropping in all cells, showing the ability of anodic bacteria to utilize industrial wastewaters as substrate. A
maximum power of 419 mW m-2 was obtained with milk industry wastewater, while the electrodes in MFC with chemical
industry wastewater were corroded after few days of operation suggesting that every wastewater is not suitable as substrate for
electricity production and treatment in MFCs.