The applicability of an electrocoagulation process with the biological treatment for the color removal of C.I. Basic Red 46 (BR46)
dye was studied. It was shown that decolorization efficiency increased by increasing current density (j), pH, temperature (T) and
agitation speed (ω) and decreased with the initial dye concentration [BR46]0. The optimal conditions in presence of a grid electrode
(waste) used as cathode were found to be j=9 mA cm-², pH 8, T=35°C, [BR46]0=30 mg L-1 and ω=120 rpm. Under these conditions,
the electrocoagulation process was able to achieve 100% color removal efficiency in 5 min. The kinetics study showed that the
apparent rate constants increased with increasing current density and the results suggest also a zero-order kinetic model. In addition,
the plot of [BR46]t/[BR46]0 ratio vs time presents two steps. The first step, named latency period (tLatency) is current-dependent, but
depended only slightly on the initial BR46 dye concentration. The latency period obtained varies roughly as 1/I and a minimal iron
concentration was required before electrocoagulation started (0.083 mg L-1). The C.I. Basic Red 46 dye did not adsorb onto the
flocs in its molecular form. The biodegradability of the solution treated by electrocoagulation process under the optimal conditions
was examined and the increase of the BOD5/COD ratio from 0.05 to 0.35 showed the enhancement of the biodegradability of the
pretreated solution. The electrocoagulation coupled to 16 days biological treatment leads to almost 65% of the dissolved organic
carbon mineralized by the hybrid process.