AbstractThe corrosion behaviour of three commercial nickel-chromium based dental materials was investigated by electrochemical methods in a corroding mixture of sodium chloride, oxalic acid and lactic acid. In order to establish electrochemical parameters of the corrosion process, linear and cyclic polarization curves were plotted. The samples performances in the corroding system were investigated by weight loss, pH and electrical conductivity measurements. The quantitative analysis related with...
Autori: , Daniel Mareci, Daniel Sutiman, Mircea Teodor Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25132

AbstractThe aim of this work was to obtain Ag - doped zeolite as antibacterial material using natural and sodium form of zeolite from Mirsid Romania with the dimensions ranged between 0.8-1.2 mm. The comparative structural characterization of natural and Ag - doped zeolite were performed using Laser Induced Breakdown Spectroscopy (LIBS), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and Infrared Spectroscopy (IR). In addition, the ion exchange total ...
Autori: Aurel Iovi, Corina Orha, Cornelia Ratiu, Florica Manea, Georgeta Burtica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25220

AbstractThe removal of formasine fines particles from water by precipitation with polyelectrolyte and surfactant complex of Polyacrylamide (industrial product Praestol 611 made by Degussa) and Sodium Lauryl Sulphate (SLS) was experimentally studied. Calcium oxide was added to initiate precipitation of the polyelectrolyte complex together with the fines particles. The experiments were carried out with complexes having the surfactants concentration higher then the critical aggregation concentratio...
Autori: Cristina Costache, Gabriel Dabija, Mihaela Mihai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25238

AbstractThe crystallization of ferrierite/ZSM-35 zeolite at 180 Âą 50C in the presence of ethylenediamine as a structure-directing agent from reaction mixtures containing various active NaOH/SiO2 ratios has been studied. X-ray diffraction, scanning electron microscopy, TG/DTG/DSC analysis, nitrogen sorption measurements and temperature-programmed ammonia desorption were used to characterize the ferrierite/ZSM-35 solids. The XRD data reveal that the samples synthesized in optimized conditions are...
Autori: Ioana Droahna, Iuliean Asaftei, Nicolae Bilba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25251

AbstractZeolites Cs+, Na+-chabazite with SiO2 /Al2O3 ratio of 7 were prepared from gels with molar composition (2.41-2.73)(Cs+ + Na+)2O : (0.02 TPAOH) : Al2O3 : 7.21 SiO2 : (194-204) H2O in static hydrothermal conditions at 108 – 132 0C for 8-21 days. The solids were characterized by X - ray diffraction, scanning electron microscopy, thermal analysis and nitrogen sorption measurements. The nitrogen sorption isotherms at -1960C present a hysteresis loop which is indicative for the existence of ...
Autori: Ionela Droahna, Iuliean Asaftei, Nicolae Bilba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25266

AbstractThe corrosion resistance of three types of low-carbon steels in water-contaminated mixtures of adipic acid and methanol was investigated. The concentration of water in the organic mixture was progressively raised from 1% to 5%, while the carbon concentration in the steel samples varied from 2% to 4%. Infrared spectroscopy (IR) and X-ray diffraction (XRD) were used to investigate the insoluble corrosion products. Based on the weight losses measurements, on the polarization curves and on t...
Autori: Adrian Cailean, Daniel Mareci, Daniel Sutiman, Mircea Teodor Nechita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25287

AbstractIn the present work, composite membranes were developed for separation of hydrogen from its mixtures with other gases. The composite membranes were characterized by single gas permeation and scanning electron microscopy. Gas transport properties have been determined for four gases (H2, CH4, N2, CO2). The influence of cross-linking on transport was measured. H2/CH4 selectivity values up to 115 were obtained. The resulting membranes have a selectivity of H2/CH4 close to intrinsic selectivi...
Autori: Carmen Nistor, Marcel Popa, Sergey Shishatskiy, Suzana Pereira Nunes
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25339

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

Abstract This paper presents the preliminary results of photocatalytic oxidation of humic acid from water using two types of catalysts, i.e., TiO2 and Ag-doped TiO2 modified zeolite (TMZ and Ag-TMZ). TMZ and Ag-TMZ, with zeolite granulation of 315-500 ?Źm was synthesized by sol-gel method, and the morphology and composition of the unmodified/modified zeolite were characterized by BET (Brunauer–Emmet–Teller) method, X-ray Diffraction (XRD), scanning electron microscopy (SEM) and energy dis...
Autori: Cornelia Ratiu, Carmen Lazau, Paula Sfirloaga, Corina Orha, Daniela Sonea, Stefan Novaconi, Florica Manea, Georgeta Burtica, Ioan Grozescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25397

Abstract The preparation of microspheres containing chitosan, sodium alginate and ibuprofen and the pH dependent drug release were investigated. The microspheres were prepared by two experimental routes: the first one starting with a chitosan/ibuprofen core subsequently coated by an alginate shell (S1) and the second one based on an alginate/ibuprofen core, later coated by a chitosan layer (S2). The physical-chemical characterization was done by using Dynamic Light Scattering (DLS), Atomic Fo...
Autori: Luminiţa Elena Balău, Nicolae Aelenei, Marcel Ionel Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25412

Abstract Study of geopolymer is a developing field of research for capitalizing solid waste and by-products in the view of new materials achievement having characteristics necessary for using as cement substitute. Also, it provides a solution to many problems regarding environment, such as reduction of gaseous emissions and particles matter resulted from cement industry and raw materials economy. In this paper, the experimental conditions for obtaining new materials on the basis of fly ash f...
Autori: Maria Harja, , Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25419

Abstract A crucial stage which makes the other directions of development of membrane processes is getting new membrane materials, to meet increasingly stringent of selectivity and productivity. Polyetheretherketone shows high stability against chemical and physical agents but is poorly soluble in most common solvents. Present studies on obtaining the support of the polyetheretherketone membranes were limited by: solubility of polyetheretherketone in concentrated sulfuric acid and fast speed a...
Autori: Mihaela Emanuela Craciun, Aurelia Cristina Nechifor, Florin Aldea, Gheorghe Nechifor
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25475

Abstract In order to improve the photo-efficiency of the electronic process as well as the response into the visible part of the spectrum, TiO2 doping with heavy metal (cadmium, cooper and nickel) have been employed. The objectives of this work are: (a) to prepare doped Me(Cd, Cu, Ni) TiO2 by doctor blade (DB) and spray pyrolysis deposition (SPD) techniques, (b) to characterize the catalysts, (c) to study and compare the activity of the Cd-TiO2, Cu-TiO2 and Ni-TiO2 catalysts on methyl orange ...
Autori: Luminita Andronic, Bianca Hristache, Alexandru Enesca, Anca Duta, Maria Visa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25480

Abstract The evolution of the request in wood production leads to larger stem wood consumption, intensive harvesting and consequently the environmental impact increases. One of the most ignored secondary resources in spite of limited reserves, branch wood could be used in new added value products as an alternative to stem wood, providing its characteristics are known and understood. This paper is part of a larger research project, which here compares the compression strength parallel to the g...
Autori: Lidia Gurau, Marina Cionca, Cristina Timar, Alin Olarescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25492

Abstract Macro-Defect-Free (MDF) cements are polymer-cement composites characterized by high value of flexural strength. Due to their thermal and electrical insulating properties, MDF cements could replace other insulators obtained by environmental non-friendlier technologies or being themselves toxic and non-biodegradable. MDF cements obtained by the use of an ecologic polymer (poly(vinyl alcohol)) shows high mechanical resistance in the initial state but also it’s dramatic decrease after ...
Autori: , Georgeta Moise, Hulusi Ozkul, Ozgur Ekincioglu, Catalin Croitoru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25493

Abstract The paper briefly presents the principle, methodology basics and the research opportunities offered by a modified L-joint test for a complex in-field evaluation of wood behaviour in outdoor above ground exposure, corresponding to the biological use class 3. A comprehensive and detailed examination of the tested samples, looking not only to the biological degradation of wood but also to wood cracking and coating performance (cracking, flaking, exfoliation, adherence), was performed an...
Autori: Maria Cristina Timar, Emanuela Beldean, Mihaela Porojan, Lidia Gurau
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25494

Abstract The paper presents the surfactant-assisted solvo-thermal route to synthesize nanoparticles of cerium oxide with different shape and morphology. The precursor was calcined at 400°C for 4 h in order to obtain CeO2 nanoparticles. The obtained samples were characterized by means of thermal analysis and FTIR spectroscopy. The UV-Vis analysis was used to study the optical properties. The morphologies and nano-structures were characterized by scanning electron microscopy (SEM) and XRD. It...
Autori: Nicolae Apostolescu, Gabriela Carja, Gabriela Apostolescu, Elena Husanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25541

Abstract Geopolymerization is a continuous developing field of research for utilizing solid waste and by-products. It provides a solution to many problems where hazardous residue has to be treated and stored under critical environmental conditions. Consumption of fly ash in the manufacture of geopolymer is an important strategy in making materials more environmentally friendly. Fly ash has been chosen as a base material in order to utilize this industrial waste. Previous researches have show...
Autori: Maria Harja, Marinela Bărbuţă, Maria Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25542

Abstract In this work the experimental conditions to synthesize, by direct hydrothermal synthesis, self-bonded pellets of ETS-10 phase containing iron were studied. The following gel composition was used: xNa2O-0.6KF-1.28xHCl-yFe2O3-0.2TiO2-1.49SiO2-39.5H2O with 0.8Â???xÂ???1.4 and 0.015Â???yÂ???0.08. The products obtained were characterized through X-ray diffraction on powders (XRD), thermal analysis (TG, DSC, DTG), scanning electron microscopy (SEM) and microanalysis (EDS). The data obtai...
Autori: Pierantonio De Luca, Danilo Vuono, Monica Filice
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25544

Abstract University campuses can be seen as â€?small cities’ due to their high population (students, professors, employees) and corresponding high traffic flow, which may have a significant impact on both environment and people health. The objective of this work was to analyze particulate matter seasonal trends in the university area of Cosenza (University of Calabria). The relationship between sources emission, meteorological parameters and particle properties was defined. Sampling was co...
Autori: Monica Filice, Pierantonio De Luca, Giuseppe Piero Guido
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25564

Abstract This work describes the preparation of a hydroxyapatite/polyurethane composite membrane and their characteristics. The porous hydroxyapatite/polyurethane composite membranes were made via solvent casting process. The deposited hydroxyapatite layers were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The data suggest that the method utilized in this work can be applied to obtain deposition of coating of crystalline hydroxyapatite on porous polyurethane...
Autori: Gabriela Ciobanu, Dorina Ignat, Gabriela Carja, Constantin Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25572

Abstract Commercial pure titanium (Cp-Ti) and titanium alloys are used on large scale in restorative dentistry due to their advantages as compared with other similar materials: chemical inertia, low density, high strength, high corrosion resistance in biological media and increased biocompatibility.The effect of fluoride and pH on the corrosion behaviour of Cp-Ti and a new Ti50Ta alloy were examined by open circuit potential (EOC) measurement, linear polarization, potentiodynamic polarization...
Autori: Daniel Mareci, Daniel Sutiman, Georgiana Ciurescu, Igor Creţescu, Romeo Chelariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25591

A series of sodium bentonites as raw material were prepared to the modified inorganic iron-nickel montmorillonites and organic composite montmorillonites. The structural characterization and morphology of the iron-nickel crosslinked modified bentonites were observed by means of IR spectroscopy, X-ray diffraction, scanning electron microscopy. The effects of the amount of bentonites, adsorption time and pH change on the adsorption of Cr(VI) have also been studied. The results indicated that the a...
Autori: Shao Hong, Cao Ninghttp://www.ecozone.ro/reviste.php?RID=25695

Abstract:The paper presents the influence of different WO3:TiO2 ratios on the photocatalytic and photoelectrolytic properties of the films.The investigations are focused on the morphological (Atomic Force Microscopy, Contact angle), compositional (X-raydiffraction), optoelectric (conductivity, photocurrent) and photocatalytic properties of titanium dioxide films mixed with tungstenoxide. The most important application of these layers is in wastewater purification and hydrogen production using ap...
Autori: Alexandru Enesca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25743

Abstract:Hybrid nanocomposites may synergistically combine and enhance the properties of inorganic nanoparticles and organicmolecules.The objective of this paper is to examine particular nanocomposites films based on binary copolymers and inorganic TiO2nanoparticles from the structure and properties point of view. These nanoparticles were dispersed in maleic anhydride-styrene(MAS) copolymer by using elaidic acid, trans isomer of the oleic acid, as coupling agent in order to increase the compatib...
Autori: Alina Matei, Dana Perniu, Ileana Cernica, Irina Popescu, Lucia Dumitrescu, Vasilica Schiopu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25755

Abstract:The aim of this work is to obtain sintered porous membranes with graded structure for microfiltration by sedimentation andsintering of metallic powders. Our previous studies have demonstrated the possibility of obtaining sintered porous materials withgraded structure by sedimentation. In this paper, spherical nickel particles were used having a grain size in the 2-90 Âľm rangemeasured by the laser scattering particle size analyzer. The powders were sedimented into a sintering die in a s...
Autori: Gyorgy Thalmaier, Ioan Vida-Simiti, Nicolaie Jumate, Niculina Sechel, Valentin Moldovan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25775

Abstract:The paper refers at adsorption studies using the maghemite nanoparticles as adsorbent for removal of the hexavalent chromium from aqueous synthetic solutions. Adsorption reached at equilibrium within 10 minutes and was registered as maximum at pH 2.54. The adsorption data were analyzed and fitted by Langmuir isotherm. Investigation methods for characterization of the nanoparticles were X-ray diffraction, scanning and transmission electron microscopy. Also, in order to evaluate the hexav...
Autori: Andra Mihaela Predescu, Andrei Predescu, , Eugeniu Vasile
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25805

The aim of this work is the study of activated sludge floc samples stained with different dyes and imaged by Confocal Laser Scanning Microscopy (CLSM). Activated sludge flocs were stained for lipids, sugars and esterase enzyme producing bacteria. Images were acquired for different samples to analyze the structural characteristics of the bioaggregates. The analysis of the CLSM images allowed for the localization and estimation of the quantity of different build-up materials. The 3-D reconstructio...
Autori: Bela Abraham, Botond Raduly, Dan Niculae Robescu, Szabolcs Lanyi, Szabolcs Szilveszter, Szilard Bucs
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25937

This research investigates the influence of certain vitamins (A and D2) on the possibility of hydroxyapatite formation on polymer surfaces. A coating method based on biomimetic techniques was used to form a crystalline hydroxyapatite thin layer on porous polyurethane matrix. The method is based on a wet process of hydroxyapatite formation that involves porous polyurethane film soaking in a modified synthetic Simulated Body Fluid (SBF) solution. This modified SBF solution contains vitamin A and v...
Autori: Alina Costina Luca, Constantin Luca, Gabriela Ciobanu, Simona Ilisei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25884

Fly ash and fly ash based zeolites are inorganics used for improving soil quality. In the current paper, the hydrothermal modification of fly ash was studied. Three methods have been employed for this purpose. The first method involved the use of an autoclave, where synthesis has been performed at a temperature of 120 0C and a treatment time of 4 to 8 hours. Within the second method, the modification of the ash at a temperature of 600 0C by fusion was carried-out. In this method, a mixture of as...
Autori: Corneliu Munteanu, Daniel Bucur, Lacramioara Rusu, Maria Harja, Marinela Barbuta, Ramona Carla Ciocinta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25885

An alternative preparation method for PAC (pre-hydrolyzed aluminium chloride with general formula Alm(OH)nCl3n-m) by electrochemical synthesis is presented in this paper. The electrochemically obtained PAC (E-PAC), in which the most effective species of the polymeric Al component were estimated by 27Al RMN method, with properties similar to the properties of a commercially available PAC solution, was successfully generated in a electrochemical reactor. For obtaining as much as Al13 polymer by el...
Autori: Adina Pacala, Ciprian Radovan, Ilie Vlaicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25901

AbstractIn this paper, we report a study on structural evolution, magnetic susceptibility and arsenic content of colloidal pyrite fromXinqiao deposits in Tongling, Anhui Province, China. The pyrite was treated under N2 atmosphere and charaterized with X-raypowder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), magnetic susceptibility analysis, and atomicfluorescence spectroscopy (AFS). We observed that heating of colloidal pyrite in N2 atomosphere did not change the crys...
Autori: Dong Chen, Ping Li, Tianhu Chen, Xiao Zhu, Yadan Shi, Yan Yang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25951

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

AbstractIn this paper the synthesis, characterization and testing of composite material based on multi-wall carbon nanotubes and silverdopednatural zeolite (MWCNT-ZAg) has been investigated for humic acid (HA) adsorption. The surface characterization of thecomposite material has been investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM/ EDX) analysis.The Langmuir and Dubinin-Radushkevich (D-R) models fitted the best experimental data informing that adsorption process ofH...
Autori: Aniela Pop, Corina Orha, Florica Manea, Virgil Tiponut
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26023

AbstractPrinted circuit boards-PCBs are particularly rich in copper and precious metals. Recoveries of metals in our work started withtests for electrodeposition of Au, Ag and Cu from synthetic solutions on graphite and copper electrodes. Processes were studiedusing cyclic voltammetry in ranges: (-1200)-500 mV and (-800)-(-200) mV and (-400)-1400 mV. Different supportingelectrolytes like: H2SO4 0.5M, HCl 0.1M and HNO3 0.1M were used. Electrodeposition of studied metals from real solutions wasfol...
Autori: Adina Căta, Cristian Tănasie, Daniel Boc, Firuţa Fiţigau, Mariana Nela Stefănuţ, Paula Sfîrloagă, Raluca Pop, Zoltan Űrmösi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26036

AbstractWater quality is an inportant concern for the ecosystem state from a particular region. Since the continuous urban and economicdevelopment induces a negative impact on entire hydrological cycle, this study investigates the water quality of a Romanian lake,located in the Surduc area - Timis County. This perimeter has undergone significant economic development in the past twodecades due to increased tourism potential and the number of holiday residences.We proposed hybrid materias for the ...
Autori: Adina-Elena Segneanu, Cornelia Bandas, Florentina Cziple, Ioan Grozescu, Paula Sfîrloagă, Titus Slavici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26040

Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

Abstract Waste recycling represents a very significant issue for the protection of our environment. Large waste quantities (slag and ashes) are products of the coal extraction industry and its subsequent combustion in thermal power stations. The possibilities of obtaining crystallized glasses in the CaO-Al2O3-Fe2O3-SiO2 system by introducing in the raw materials mixture ashes from Mintia Deva thermal power station have been studied. The physical and chemical characterization of the...
Autori: Firuţa Goga
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26121

AbstractGallinaceous feathers are an abundant solid waste from the poultry processing industries, which poses disposal problems. Akinetic study dealing with the adsorption process of wool reactive dye, Yellow Lanasol 4G (CI Reactive Yellow 39), ongallinaceous (Gallus gallus, Cobb 500) feathers was carried out. The main research goals of this work were to evaluate theviability of using this waste as adsorbent and to study the kinetics of the adsorption process, using a synthetic effluent. Thechar...
Autori: Sónia Adriana Figueiredo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26203

AbstractThe reuse of a wastewater treatment system was investigated using intermittent media infiltration (IMI) to evaluate the fecalcoliform (FC) removal efficiency with natural zeolite containing clinoptilolite from the state of San Luis Potosí, Mexico and itszinc-modified form (Zeo-Zn). The municipal wastewater, which was from Saltillo, Coahuila, Mexico, was treated for FC analysisfor four months. The physicochemical properties of zeolite were analyzed, and their behavior as filter media for ...
Autori: Sasirot Khamkure
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26212

AbstractAdsorption of a cationic dye, methylene blue, from aqueous solutions by using sawdust (without any modification) by batchadsorbers was investigated. The surface characterization of the saw dust was carried out by Fourier transform infrared (FTIR) andscanning electron microscopy (SEM) and pHzpc of the surface was also determined. Effects of different parameters such ascontact time and initial concentration, temperature and pH on the process of removal were studied. The process of removal ...
Autori: Sushmita Banerjee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26216

AbstractInvestigations on thermochemical transformation of asbestos fibers followed by computer aided image analysis are presented.Asbestos Containing Wastes (ACW), notably asbestos-cement, were characterized before and after microwave heating withadditives aimed at reacting with and transforming asbestos fibers. Microprobe analysis helped determine the chemicalcompositions. X ray diffraction (XRD) was used to confirm decomposition of asbestos fibers during microwave heating. Electronparamagneti...
Autori: Yan Yvon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26256

AbstractA series of experiments were performed to quantify the adsorption of Cesium on Silica impregnated withtrihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101). Non-radioactive cesium solution was used as a surrogate of theradioactive 137Cs. The obtained impregnated Silica with the studied ionic liquid was characterized through scanning electronmicroscopy, energy dispersive X-ray analysis and Fourier transform infrared spectroscopy in order to put in evidence that theimpregnation with the...
Autori: Adina Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26473

AbstractIn this study, TiO2-zeolite modified carbon nanotubes-epoxy (TiO2-Z-CNT-Epoxy) and TiO2-zeolite modified carbon nanofibersepoxy(TiO2-Z-CNF-Epoxy) composite electrodes were applied for pentachlorophenol (PCP) degradation and determination inaqueous solution. The morpho-structural characterization of the composite electrodes was studied by scanning electronmicroscopy. The electrochemical behaviour of the electrodes was investigated under UV irradiation presence/absence, usingcyclic voltamm...
Autori: Ágnes Jakab
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26491

AbstractThe adsorption potential of 10 wt.% COOH/TUD-1 material for removing Cd2+ from aqueous solutions was investigated via thebatch technique, and the effects of pH, temperature and contact time were studied. Experimental data showed that the maximumCd2+ adsorption, 90%, occurred at pH 6. The adsorption equilibrium was reached within 35 min for 10 wt.% COOH/TUD-1. Theadsorption mechanism was investigated in terms of its thermodynamics and kinetics. The adsorption data were fitted using theLan...
Autori: Nabila Bensacia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26558

AbstractThe aim of this work is to study the valorisation of two regenerated low density polyethylene (LDPE) coming from dirty wastesby blending with polypropylene (PP) in presence of compatibilizer. The first step was the determination of the physico-chemicalproperties of the two regenerated samples (density, melt flow index, water absorption, melting temperature and oxidation index)and the mechanical properties (tensile and shore D hardness).The second step was the characterization of the phys...
Autori: Nabila Guerfi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26565

Abstract Biodegradable chitosan was used to cover fertilizer granules with an inert, impermeable layer in order to obtain a material with controlled release properties. The process was performed in a laboratory drum granulator. Prepared materials were characterized with available analytical methods (XRD, optical microscopy). The layer thickness of the obtained materials was in the range of 0.047 – 0.5425 mm. The degree of nutrients' release (0.64-0.965 within five hours) were deter...
Autori: Krzysztof Lubkowski
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26583

Abstract This study examined the characteristics of geopolymer with solar panel waste glass. After 28 days of curing, the compressive strengths of the geopolymer samples containing 10 mass % and 20 mass % solar panel waste glass were 63.3± 1.8 and 49.1 ± 2.2 MPa, respectively. The geopolymer sample with 10% solar panel waste glass exhibited a stronger reaction than that with 20% solar panel waste glass, and the strength decreased as the amount of solar panel waste glass increas...
Autori: HuiCong Hao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26621

Abstract The present work investigates the performance of Cristal-RightTM CR100 zeolite based on the equilibrium and thermodynamics water softening process. The commercial zeolite was characterized by scanning electron microscopy combined with energy dispersive X-ray spectroscopy and FT-IR spectroscopy. The equilibrium performances of zeolite were evaluated by the sorption capacity of calcium cations from calcium chloride solutions varying the calcium concentrations corresponding to moderate...
Autori: Liliana Lazăr
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26670

Abstract Magnetic contamination is considered more and more as a challenging issue related to biosphere pollution with magnetic materials originating in natural and artificial sources (volcanic eruptions and respectively industrial activities that contributed to iron and other metal compounds spreading in air, water and soil). Aiming to study the impact of magnetic metal ions such as iron and cobalt on the metabolism of some environmental microorganisms, in this paper an experimental simulat...
Autori: Lacramioara Oprica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26675

Abstract The bismuth oxide (Bi2O3) nanoparticles are easily synthesized from a solution of bismuth nitrate pentahydrate (Bi(NO3)3·5H2O) in ethylene glycol by a hydrolysis solvothermal route at temperatures of 120-150C. X-ray diffraction, scanning electron microscopy and UV-visible diffuse reflectance spectroscopy are used to characterize the products. The results show that the reaction temperature, the reaction duration and the initial solution concentration play important rol...
Autori: Xiaowen Luan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26689

Abstract This paper aims to analyze the characteristic of Road deposited sediment (RDS) using West Chang Tan highway, Hunan, China as a study site. RDS samples were collected at five representative highway sites and the particle size distribution was generally less than 150μm. Particles with the grain size (<150μm) had high metal concentrations among all sampling sites (unit: mg/kg): Cu 74-178, Zn 309-2737, Pb 601-1160, Cd 9.8-44.5. There is significant spatial variability between t...
Autori: Yunbo Zhai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26728

Abstract MFe2O4 nanopowders (M = Ni, Co, Cu) were prepared using the precursor technique, starting from the corresponding metal nitrates and poly(vinyl alcohol)-PVA. During the heating of metal nitrates- PVA solution, a redox reaction takes place around 150°C, leading to the formation of M(II) and Fe(III) carboxylates. These compounds were used as precursors for the ferrites nanopowders. The desired ferrites were obtained by thermal decomposition of the carboxylates; the obtained...
Autori: Marcela Stoia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26745

Abstract The preliminary results of aromatic hydrocarbon (AR) levels and PM2.5 physico-chemical characterization in Rome urban air throughout the 2014 are reported. A gas chromatograph was used for continuous measurements of AR concentrations with 30 minute time intervals. PM2.5 was collected by PM swam Dual Channel. Metal content was determined by ICP-MS. Single particle characterization was performed by Scanning Electron Microscopy equipped with a thin window system for X-ray microanalysis...
Autori: Carla Fanizza
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26780

Abstract The CoCrMo alloys have been widely used in artificial knee or hip joints. It is well known that these materials have a good corrosion resistance and acceptable biocompatibility properties. Zirconia as a ceramic biomaterial facilitates the osteoconductivity and tissue osteogenetic capacity in new bone formation around implant. Linear polarization and electrochemical impedance spectroscopy (EIS) were employed to characterize the electrochemical behavior of plasma sprayed yttrium oxid...
Autori: Manuela Romaş
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26896

Abstract The possibility to use release controlled fertilizers in the agriculture of the tropical countries is more important than in the agriculture of the countries of the cold regions. In this context, the purpose of this work is the characterization of an encapsulated commercial Fertilizer of Controlled Release named FERLENT®, which was covered with a polymeric material, obtained in situ, under controlled conditions, which allowed to corroborate the fairly well adjustment of the synt...
Autori: Mayra González Hurtado
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26916

Zirconia (ZrO2) as a ceramic biomaterial facilitates the osteoconductivity in new bone formation around implant. Surface characterization before and after electrochemical testing was performed used scanning electron microscopy (SEM). The electrochemical properties of the yttrium oxide stabilized zirconium oxide (YSZ) coated and uncoated MgCa sample with the open circuit potential at different immersion time in Ringer’s solution were studied by electrochemical impedance spectroscopy (EI...
Autori: Bogdan Istrate
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27021

A biodegradable iron based alloy was obtained through classical melting method using a furnace with controlled atmosphere. The metallic material was obtained from high purity materials using a proper obtaining method. The material is proposed as an alternative to magnesium alloys that have a very fast degradation period for applications with longer healing periods (more than 3 and between 12 to 18 months). The material was analyzed using scanning electron microscopy (SEM) and X-ray dispersive...
Autori: Sergiu Stanciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27023

This paper aims to establish the capacity removal of hexavalent chromium [Cr(VI)] from wastewaters using a TiO2 – Fe3O4 based nanocomposite. Latest researches in the field point adsorption as a better option for removal of heavy metal ions from waters, this method being more efficient and cost effective, in comparison with other advanced methods like reverse osmosis, ion exchange, nanofiltration, etc. Based on this information, the goal of this work had as purpose the obtaining, charact...
Autori: Andra Predescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27025

Heavy metal pollution is a major source of aquatic contamination and has deleterious effect on the environment, therefore treatment of the polluted sites and wastewater becomes very essential. Biofilm based bioremoval of heavy metals have been a new area of research. Bacterial strains belonging to the genus Bacillus, isolated from chromium polluted soil (Palar river basin, India) have been employed as consortium for Cr(III) removal from chrome tanning effluent. The bacterial isolates were fou...
Autori: Aafreen Fathima
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27086

This paper reports the potential of rice husk waste biomass to remove copper (II) from simulated wastewater under different experimental conditions. For this, rice husk has been pre–treated by boiling, formaldehyde and concentrated sulphuric acid. Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy and Energy dispersive analysis X–ray analyses were performed before and after adsorption, to explore number and position of the functional groups available for copper ...
Autori: Manjeet Bansal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27095

The aim of the present study was to prepare environmentally friendly silver-based materials using Cornus mas L. fruits extract. For this purpose, silver nanoparticles (Cornus mas-AgNPs) were green synthesized using this plant extract. The bioreduction of silver ions was analyzed by UV–VIS and ATR-FTIR spectroscopic studies. Scanning Electron Microscopy (SEM) analysis revealed the formation of spherical phyto-nanosilver particles with size ranging between 12 and 40 nm. Different amounts ...
Autori: Ioana-Raluca Suica-Bunghez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27139

In this study, the impact of silicate admixture in 2-line ferrihydrite on its sorption properties is presented. Synthetic ferrihydrites with broad Si content in the range of 0 to 1.5 Si/Fe molar ratios were prepared and characterized using X-ray diffractometry (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM-EDS). With an increase in the Si/Fe ratio, a typical XRD peak at 2.5Å broadens and shifts toward 3 Å; the position of Si-O stretchi...
Autori: Gabriela Pieczara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27140

The effectiveness of thermal insulation materials mostly depends on their thermal conductivity. The low thermal conductivity is predetermined by density, structure, moisture content and temperature of material and, considerably less, by other indices. Loosefill cellulose insulation is allocated to the group of materials, the density of which fluctuates within large limits. This property is related not only to application of cellulose wool in different constructions, but also to technological ...
Autori: Sigitas Vėjelis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27165

The adsorption of tartrazine from aqueous solution was evaluated using an iron (III) modified zeolitic tuff. The adsorbent was characterized by scanning electron microscopy and X-ray power diffraction; the modification process does not affect the crystalline structure of the zeolitic tuff. Sorption kinetic, isotherms, dose and pH effects were determined and the adsorption behavior was analyzed. The sorption equilibrium was reached in 72 hours, the adsorption capacity determined by the Langmuir m...
Autori: Adrián Alcántara-Cobos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27182

Catalysts based on nanocrystalline Mg-Zn ferrites supported on commercial alumina were prepared by in situ sol-gel auto-combustion technique. The as-obtained materials were characterized using Fourier Transform Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), atomic force microscopy (AFM) and Brunauer-Emmett-Teller (BET) specific surface area measurement. These materials were tested as catalysts for hydrogen peroxide decomposition and phenol oxidation reactions. The catalytic activity of ...
Autori: Tamara Slatineanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27192

Adsorption equilibrium, kinetic and dynamic studies were done for removal of zinc (II) from aqueous solutions using alunite ore. The alunite sample was characterized by using X-ray fluorescence (XRF), optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) porosimetry, differential thermal (DTA), and Thermogravimetric (TG) analyses. The batch equilibrium adsorption data of zinc (II) ions onto alunite particles were applied to some...
Autori: Hoda Arabyarmohammadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27216

In this study was synthesized MCM-41 mesoporous silica by hydrothermal treatment and funtionalized with titanium in order to obtain mesoporous materials with high surfacea area and photocatalytic activity in photodegradation of organic compounds as antibiotics. The functionalization of the synthesized support material was achieved by impregnation from alcoholic solution. The obtained materials (MCM-41) and (Ti-MCM-41) were characterized by X-ray diffraction (XRD), scanning electron microscopy (S...
Autori: Cristina Orbeci
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27274

This study presents the results obtained in tailoring thin films of alumina, deposited onto aluminium substrates by spray pyrolysis, at 250°C, using AlCl3 solutions (0.15M) in a water:ethanol (1:1) solvent mixture. As morphology controlling agents, acetylacetone and maleic acid based copolymers are added in the precursors’ solutions. The precursors’ systems are analyzed by FTIR spectroscopy and the surface morphology of alumina thin films is investigated by atomic force microscop...
Autori: Luminita Isac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27291

The objective of this study was to develop a naturally dyeing process of 70% wool /30% Angora mohair blended yarns by using bio-mordants as an environmentally friendly alternative for the conventional metallic salts. Bio-mordanting operation was achieved by using of condensed tannin extract from quebracho bark trees. Conventional mordanting has been performed using the conventional mordants like copper sulphate and tin chloride. Another specific objective of this study was to investigate the pos...
Autori: Ioana Stanculescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27337

A low-cost magnetic zeolitic material was synthesized from coal fly ash by means of a new, simple method involving alkaline hydrothermal zeolitization of fly ash (FA) followed by low-intensity wet magnetic separation. Scanning electron microscopy with energy-dispersive X-ray analysis was applied to characterize the composition, microstructure, and morphology of the material. The mineral and synthetic zeolite phases were identified by powder X-ray diffraction. The obtained magnetic zeolitic m...
Autori: Annie Shoumkova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27486

The use of activated carbon as filter media for water has gained research attractions over the years. A comparison study of granular activated carbon (GAC) of extracted palm fruit fibres (EPF), palm kernel shell (PKS) with existing filter material (EFM) commercially produced activated carbon for water filtration has been conducted. Palm kernel shells and extracted palm fruit fibres from palm oil mill wastes were processed to form activated carbon by chemical activation process. Scanning Elect...
Autori: Jamaliah Idris
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27498

This paper investigates the macrophyte Azolla pinnata modified with sodium hydroxide, as a bioadsorbent for Cu2+ and Pb2+ ions in synthetic solutions. Biomaterial characterization was performed using Scanning Electronic Microscopy (SEM); Energy- Dispersive X-Ray Spectroscopy (EDX); Fourier Transform Infra-red (FTIR) spectroscopy techniques and through the blocking of carboxylic and sulfonic functional groups. Kinetics of the process has highlighted a quick and efficient adsorption, even in low ...
Autori: Arielle Barros
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27532

In this study, Ag/TiO2–P25 nanoparticles prepared via photodeposition method and its textural properties were characterized using X–ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectroscopy (DRS), and N2 physisorption techniques. The cements modified with TiO2–P25 and Ag/TiO2–P25 nanoparticles were immobilized on tile plates, and their photocatalytic activity was evaluated versus the removal of Erioglaucine as the model o...
Autori: Mohammad A. Behnajady
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27589

Thin-film transistor liquid-crystal display (TFT-LCD) waste glass can be used as a raw material for producing geopolymers, because it contains large amounts of silicon and aluminum in its amorphous structure. The setting time and compressive strength were evaluated to determine the quality of the geopolymer product with various amounts of nano-SiO2 (0%–3%) and TFT-LCD waste glass replacement (0% - 40%). The microstructures of the samples were characterized using mercury intrusion porosimet...
Autori: Kang Gao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27634

Magnesium wastes are among the gradually ascending and therefore challenging metal wastes, which are produced by many industrial activities. The purpose of this study is the usage of magnesium waste, a raw material in magnesium borate production by hydrothermal synthesis. Boron sources (boric acid (H3BO3) and boron oxide (B2O3)) react with magnesium wastes in order to synthesize the magnesium borate mineral of admontite (MgO(B2O3)3ꞏ7(H2O)). In addition to the synthesis from waste magne...
Autori: Azmi Seyhun Kipcak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27657

The aim of this paper is to show the results of two methodological approaches applied for decontamination of the Midia Port dredged sediment to assess their potential reusability. Firstly, the sediment samples were defined in physical, chemical, microbiological and ecotoxicological terms. The results were compared to the limit values established by environmental regulations for dredged sediment management. Some sediment samples exposed a very high concentration of hydrocarbons; the sediments wer...
Autori: Irina Catianis
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27770

The native and surface modified adsorbents from agricultural waste, such as Psyllium stalks (PS) were investigated for their ability to remove the Coomassie Brilliant Blue (CBB) dye from aqueous media. The native and surface modified adsorbents were characterized by the Fourier Transform Infrared spectroscopy (FTIR). The results show that the Sodium Bicarbonate Treated Carbon (SBTC) has good surface properties for the removal of the CBB dye from aqueous media. The SBTC was analyzed by Scanni...
Autori: Premkumar Manickam Periyaraman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27898

In the present work, acid treated natural oil palm trunk powder (OPTP) has been utilized as novel adsorbents for the removal of methyl orange (MO) from aqueous solution. The batch method was employed to study the adsorption behavior of MO which was subsequently determined by UV/Visible spectrophotometer. The adsorption characteristics and operational parameters were determined by monitoring different parameters such as pH, contact time, dye concentration and temperature. The acid treated OPTP an...
Autori: Akil Ahmad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27975

Synthesis of silver nanoparticles (AgNPs) by plants is a simple, non-toxic and eco-friendly method. The purpose of this study was to develop a method for obtaining silver nanoparticles with biological properties. For reducing the silver ions, an extract of Tilia cordata (linden) flowers was used. Some parameters were investigated to optimize the synthesis method. Thus, the conditions of reaction were varied, such as pH, concentration of silver salt, different ratio of plant extract and silver sa...
Autori: Andreia Corciova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27977

The paper reports on the preparation of polysiloxane hydrophobized viscose-maghemite/goethite magnetic composite with properties appropriate for uses in oil spill sorption from polluted aqueous media. A multi-step procedure was employed to obtain the polymeric composite. The structures of the prepared samples and precursors were analyzed by Fourier transform infrared spectroscopy (FTIR), whereas their morphology was investigated by means of scanning electron microscopy (SEM). The hydrophobic...
Autori: Răzvan Rotaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28008

Leather processing is one of the highly polluting industries, due to generation of significant quantities of tanned and untanned wastes. Untanned wastes are less contaminated with chemicals and a better source of high value products such as collagen rather than tanned or finished leather wastes. In the present study, collagen dissolution substances (CDS) were prepared from bovine limed split wastes as value added products, by treating leather wastes with sodium hydroxide and fermented dairy b...
Autori: Gökhan Zengin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28095

The combustion behavior of several polymers was studied with a cone calorimeter, while the samples were based on a recycled acrylonitrile-butadiene styrene (ABS) and as additives were considered: organic montmorillonite (OMT) and a mixture of two fire retardants (FR). The samples structure and thermal properties are characterized by means of Scanning electron microscopy (SEM), X-ray Powder Diffraction(XRD) and Energy-dispersive X-ray spectroscopy (EDX) and cone calorimeter. The main objective o...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28098

Molybdate anions are used in a lot of fields and represent an essential trace element for plant and animal life; however, excessive amounts can cause adverse effect on various organism and environment. Therefore, in the present paper the adsorption performance of MgnFe- layered double hydroxides in the removal process of molybdate from aqueous solutions was studied. The layered double hydroxide (LDH) was synthesized by co-precipitation at low oversaturation method. Different ratio between Mg and...
Autori: Alin Golban
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28152

In this work, the removal of methyl orange (MO) and Cd2+ by simultaneous adsorption on adsorbent obtained from modified charcoal (BCBH) coated with TiO2 has been studied. The synthesized materials obtained from wood branches were characterized using atomic force microscopy (AFM) for the roughness and SEM to determine the morphology of the surface. EDX spectroscopy indicates the presence of C, N, O, Na, K, P and Ti on the surface of the adsorbent materials. The micro-porosity and BET specific sur...
Autori: Nicoleta Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28157

The contamination of aquatic and terrestrial environments by pesticides is highlighted by their possible toxic properties and poor biodegradability on the environment. The development of low cost by products from agricultural sectors as a suitable solution for contaminated areas remediation is of great environmental interest. Straw wastes can be considered as a promising alternative to remove different chemical compound that are environmentally toxic. In this study, some materials derived from ...
Autori: Irina Gabriela Cara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28161

Sodium silicate, iron sulfate, magnesium sulfate, and zinc sulfate were used as the raw materials to prepare a new inorganic polymer flocculant, polysilicate ferric magnesium zinc (PSFMZ), using direct recombination. The effects of molar ratio of zinc to silicon, ratio of iron to magnesium, reaction temperature, and reaction time on deoiling rate were explored. The optimal synthesis conditions for the flocculant for the thermal-washing treatment of oily sludge were determined. Results showed tha...
Autori: Lanlan Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28165

The valorization of a metallurgical waste (i.e., an iron-rich slag) as raw material for the fabrication of high hardness glass-ceramics using differential thermal analysis, X-ray diffraction, X-ray fluorescence and scanning electron microscopy was investigated. The melting of the slag was aided by the addition of waste glass cullet (WGC) and the vitrification field of this system was investigated. The non-isothermal crystallization kinetics of the parent glass with the highest slag content was s...
Autori: Erika Iveth Cedillo-GonzĂĄlez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28168

Inorganic ceramic materials is receiving more attention in recent times due to their unique characteristics which include different pore structures, hydrophilic surfaces, high chemical, thermal and mechanical stabilities that offer avenues for application in water treatment. In the present work, cost-effective clay ceramic water filters of different designs were developed from clay (50, 60, and 70) %, sawdust (15, 20, 25, and 35) %, grog (5, 10 and 15)% ratios plus 5% bone char by volume and ...
Autori: Enyew Amare Zereffa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28196

Copper and Zinc co-doped titania nano photocatalyst (Cu-Zn-TiO2 NPC) was fabricated and characterized using room temperature X-ray diffraction (XRD), field emission electron microscopy (FESEM) with high-resolution transmission electron microscopy (HRTEM) and energy dispersion X-ray (EDX). X-ray diffraction studies of the Cu2+-Zn2+/TiO2 show the presence of anatase phase TiO2 and in the sample prepared from 0.05, 0.10, 0.15 and 0.20 mmol have also shown the presence of anatase phase only. The ph...
Autori: Tentu Nageswara Rao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28198

LED waste quartz sand (LEDWS), which is a prominent by product of the LED manufacturing process, may contaminate the environment because it comprises specific heavy metals (e.g., As and Cu), which are hazardous ingredients to the environment when disposed of improperly. Therefore, this study investigated the use of light-emitting diode (LED) waste quartz sand to partially replace Portland Type I cement (OPC) to evaluate the feasibility of reusing it as a pozzolanic material. The SiO2, Na2O, and ...
Autori: Kae-Long Lin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28207